STAAD Pro Structural Engineer Bangalore : www.nauvata.com Engineering Pvt Ltd

[muthukalee]

Position : Senior Engineer - Structural

Qualification : B.E / M. Tech in Civil, Structural.

Location : Bangalore

Experience : 10Years and above

JOB DESCRIPTION :
* Well experienced in the preparation of structural calculations applicable for onshore and offshore installations.
* Well experienced in performing structural analysis using software like STAAD Pro., SACS Etc.
* Review and approval of Design drawings/documents/materials & purchase requisitions/technical Bid analysis.
* Review & approval of design calculations.
* Review/Preparation of man hour estimates.
* Review/Preparation of drawing/document schedule.
* Quality assurance.
* Coordination with other departments/Projects/Supplier/Customer.
* Development/Up gradation of Technical specifications/Standard
* Should be able to lead and guide the team on all technical and Non technical aspects.
* Well experienced in preparing: Structural analysis reports, Weight Control report, Structural modeling, Structural drawings for onshore and offshore, Skid lifting arrangements.

About us :
Nauvata Engineering is a leading provider of Engineering Design services in South East Asia since 2001.Our focus is on Design Services for Oil and Gas domain. Nauvata Engineering provides FEED, CONCEPT, DETAIL, Production and Fabrication Engineering services for oil and gas companies primarily located in South East Asia. Our vision is to expand our reach in areas like Europe, Middle East and South America. Nauvata Engineering is co-located out of Johor Bahru Malaysia and Bangalore, India.

Contact us :
Nauvata Engineering Pvt Ltd
#42,6th Floor, Block 'A',
27th Cross Banashankari 2nd Stage
Bangalore - 560 070
Karnataka,
India
Ph : +91-80-26714690
E-Mail : info@nauvata.com
http://www.nauvata.com

[Guest]

Dear Sir / Madam,
I am Raghavendra, i have done M.Tech in structural engg.
My Resume Follows,
Raghavendra.A.M
M.Tech, Structural Engg
Mb : +
Email : ragh1983 AT gmail.com
Objectives

Seeking an opportunity where in I can blend both of my experience & skills, wherein I can give the best in the field of Structural Engineering. Along with being efficient and effective in whatever endeavors I undertake and prove myself worthy. Diligence and honesty is what I aim to practice.
Experience Profile
Experienced in design of multistory buildings like residential and commercial purpose, sewerage treatment plant, substations and industrial buildings. Worked in several stages of project such as proposal, pre-bid engg, estimation of quantities, detailed design engineering.
Job Description
- Detailed estimation of quantities
- Coordinating with clients and architects
- Preparation of calculation sheets
- Design & detailing as per American codes
- Staad modeling and analysis
- Preparation of specification
- Site visits
Academic qualification
M.Tech (Structural Engineering)
Dayananda Sagar College of Engineering, Bangalore
2005 - 07
B E (Civil Engineering)
JNNCE, Shimoga
2001- 05
Computer /Software Skills
Packages used : STAAD pro v8i
PLANWIN & FRAMEWIN
AutoCAD
MS-Office, Good in Excell.
Member of Association of Consulting Civil Engineers – 2564-L
TOTAL WORK EXPERIENCE : 3.2 years
1. COMPANY : CHEMTEX CONSULTING OF INDIA (P) Ltd.
Bangalore
Designation : Engineer-1
Period : From December 2008 till date.
Project - 1. NEW SCADA SYSTEM

Client : ABB, Bangalore.
Owner : OIL INDIA LIMITED, INDIA.
Job Description :
Detailed design and estimation and item wise specification for OIL, which comprise of RTU building and master control station building scada, etc which is located in Assam, India.
Project - 2. DOHA SOUTH SEWERAGE TREATMENT WORKS, PHASE II EXPANSION

Client : L & T.
Owner : QATAR PUBLIC WORKS AUTHORITY.
Job Description :
Detail design and estimation of tanks & buildings. It is an expansion project for sewerage treatment. It consists of ultrafiltration building, balancing tanks, aerobic digester, blowerhouse etc., located at Qatar.
Project - 3. THOR, VENEZUELA

Client : TECNOAZUCAR (Cuban Engg Company).
Owner : PDVSA AGRICOLA S.A (Pedevesa Group)
Job Description :
Detail engineering services which comprise of tanks, tank supporting foundations, equipment supporting foundations, pipe racks etc. This industry is basically for yeast production, which produces 100 TPD. This industry is located at Venezuela, South America. Designs & detailing done as per Venezuelan codes & American codes.
Project - 4. PASHMINA PROJECT – SPECIALITY CHEMICALS

Client/Owner : MOMENTIVE PERFORMANCE MATERIALS
Job Description :
Momentive basically manufactures silicon products. This unit has structures like laboratories, warehouse, elastomer building, piperacks, equipment supporting platforms etc. Detail engineering service had been provided. This industry is located at Chennai, India.
Responsibilities :
- Specification preparation.
- Item wise specification for civil works.
- Preparation of preliminary BOQ.
- Preparation of calculation sheets.
- Preparing Architectural Drawings.
- Staad modeling and analysis for earthquake and wind loads.
- Detailed design and analysis for wind and seismic loads according to Indian codes.
- Detail design and analysis for wind and seismic loads according to American codes.
- Design of tanks, pump foundations & equipment supports.
- Design of kneader supporting structure & platform.
- Drawing preparation and checking.
- Preparing bar bending schedule.
- Coordinating with clients & have discussion with them.
2. COMPANY : CHETANA CONSULTANTS.
Bangalore.
Designation - Structural Engineer
Period : October 2007 to December 2008
Project - 1. CLARION HOTEL
Client : M/s INOVOA HOTELS & RESORTS PVT LTD.
Job Description :
Hotel Building (2B+G+6), RCC framed, flat slab system, with the floor area of 26800 sqft. Retaining walls up to a height of 9m. And foundations are of isolated and combined. Complete co-ordination with architects & contractors.
Project - 2. WIPRO AT HYDERABAD
Client : WIPRO LTD.
Job Description :
It has two phases, Phase 1 – 5,99,343 sqft & Phase 2 – 5,22,758 sqft.
It is (G+10) RCC framed flat slab system.
It has totally 11 slabs. Flat slab system of (8x8) m grids & with central lift cores.
Project - 3. PENINSULA IT SEZ
Client : RR MEGA DEVELOPERS PVT LTD, HYDERABAD.
Job Description:
(3B+G+14) RCC framed structure. Phase 1 – 5,45,000 sqft
It has 3 basements plus 15 upper floors. Flat slab system of (11x9)m grids & with central lift cores. The first basement is of beam slab system since the fire tender loads are coming.
Responsibilities:
- Co-Ordination with Architects & clients.
- Idealization of the Preliminary column loads to fix the column sizes & groupings.
- Lateral load analysis for Earthquake and wind load using Frame Win and Staad-Pro Software.
- Verification of the column loads & moments for different load combinations & tabulating for the governing load case.
- Detail design and detailing of structures as per Indian codes.
- Design of footings, columns, retaining walls, beams, slabs and shear walls &
water tanks.
Training Undergone

- Statistical Analysis on Quality of Various Cement Properties, from CIVIL-AID TECHNOCLINIC Pvt. Limited (Torsteel Research Foundation in India), Bangalore.
In Material Testing Laboratory for quality analysis of cement, during July 2006 to September 2006.
- Participated in National Concrete Cube Test Competition in 2005 for Karnataka state.
- Participated in Workshop on Fire Protection of Structures, conducted by Building Fire Research Centre in National Institute of Engineering, Mysore.
[Raghavendra.A.M]

[Guest]

CURRICULLUM VITAE
PRABHOSHA KAIKINI
Email : Puppy.20gk AT gmail.com
Objective :
To work on a challenging project which provides an opportunity to enhance my technical skills and knowledge, this could provide me an insight into new aspects so that it would be helpful for my career.
Soft Skill Set
- Concepts of Hardware and Networking
- Operating Systems known are MS Windows 98/XP
- Micro Processor 8086 and Micro Controller 8051
- Knowledge of PLC and SCADA
Academic Profile :
Class College / School Board / University Year Percentage
B.E.
(ITE) RURAL ENGINERRING COLLEGE
BHALKI VTU 2010 75.27%
DIPLOMA
(ECE) R.N.S POLYTECHNIC
MURDESHWAR DTEB 2006 62.69%
10TH STANDARD R.R HIGH SCHOOL ANKOLA KSEEB 2001 63.2%
Work Experience
Worked as a lecturer in RURAL ENGINEERING COLLEGE From 11th oct 2010 To 30th june 2011 .
Academic project details
PROJECT TOPIC : SPEED CONTROL OF AC MOTOR USING PLC AND SCADA
TOOLS : INTOUCH SOFTWARE
CONDUCTED AT : REC, BHALKI
SYNOPSIS :

The project is designed to control the seven different speed of ac motor , by using the PLC program and SCADA Intouch Software. Displaying the output of the motor in a graphical way by using SCADA software.

Co-curricular activities :
- Volunteer in all the activities of RANBOMI-09, Students forum of IT.Dept of SAC.
- Organizing the annual college day. Conducted various events.
- Co-ordinator of training and placement cell in .R.E.C Bhalki.
Interests :
- Listening music
- Cooking
- Reading Books
Strengths :
- Dedicated and Hard worker
- Quick Learner and Good Listening Skills
- Good Team Player
- Adaptability to changing environment
- Self Starter
- Positive Attitude

[Rajeshh90]

Is their any jobs for civil engineer fresher?