www.ciena.com India Pvt Ltd Gurgaon, Delhi : Network Process Engineer

[deepika]

Lead/Principal Engineer-Network Processor/DN, 9-14 years exp, Delhi/NCR

Ciena India Private Ltd. - Design and development for real time embedded networking products High level of proficiency in C++ object oriented development Experience with Clearcase or equivalent Develop and track personal schedules Provide input to product management and tech pubs

About CIENA Corporation :
Known for 'practical innovation' since its founding in 1992, Ciena is a leading supplier of application-focused communications networking equipment, software and services to telecommunications service providers, cable operators, government and enterprise customers across the globe.

For more Company details kindly visit our site
www.ciena.com
www.ciena.com/india

Applicants can apply directly to: nigupta@ciena.com

Designation: Lead/Principal Engineer-Network Processor/DN

Job Description:
Design and development for real time embedded networking products
High level of proficiency in 'C++' object oriented development
Experience with Clearcase or equivalent
Develop and track personal schedules
Provide input to product management and tech pubs Desired Profile * Minimum 3-4 years of C++, Atleast 5 years of embedded Linux / OSE development experience, Bootrom development / board bring up, High Availability / Redundancy / Backup, CORBA sub system, SNMP.
Total experience atleast 10 years.
All work should have involved hands on development and not just CLI /GUI.

* Minimum 5-6 years C++ development experience, TDM / SONET, Ethernet, RTP (Real Time Protocol), Network Processor (preferably Wintegra). All the skills mentioned are MUST. Total experience atleast 10 years.

* Minimum 3 years C++ development experience. Network processor development (preferably EZ chip), device drivers and Micro code (Assembly programming).
All of the skills are a MUST.
Total experience atleast 7 years.

Location : Delhi/NCR
Keywords: C , TDM, SONET, Ethernet, RTP, Network Processor, Wintegra, L2 bridging VLAN, STP, RSTP, High Availability, Redundancy, Device Driver

[Guest-IJT]

Name : MOHAMMED MUZAFFAR ALI
Email : muz_alikhan AT yahoo.co.in
Designation / Skillset : AUTOCAD/DRAGHTSMAN DESIGNER
To : H. R. MANAGER

Dear Sir/ Madam,
I am interested to work for your organization, as per my qualification and experience.
I offer my candidature for the Post of AutoCAD Draftsman Designer position at your esteemed organization In response, I enclose my resume for your consideration.
Sir, Review of my credentials will confirm that I am capable of serving as the catalyst for achieving revenue objectives and organic growth through effective contributions. I possess around 12 years’ of experience in Saudiarabia and Doha Qatar in Strategic AutoCAD Draftsman Designer, Relationship Management and Team Management. Demonstrated abilities in implementing strategies for augmenting.
I understand that working for your organization requires a candidate who is team oriented and is able to deal with various projects. I am an Independent thinker well organized, self-directed and able to prioritize multiple tasks in a fast paced environment Mature, reliable, flexible, detail-oriented, bright, and articulate and guarantee to adhere to recognized professional standards with your organization. I would bring focus on quality endeavor at all times to further your Business Development. Furthermore, I work with people of different levels. I assure you that I will prove myself up to your entire satisfaction.
My goal is to transit my enthusiasm, creativity and experience into a position, where I continue to provide the strategic and tactical leadership critical to retaining valued organization. I am certain that my presence in your team will prove to be beneficial to your organization. As such, I would welcome an opportunity to speak with you Sir.
Thanking you for your time and consideration and hoping for a favorable response Sir.
Yours Sincerely,
M.ALI
MOHAMMAD MUZAFFAR ALI
Enclosure : Resume
Resume :
MOHAMMED MUZAFFARALI E
CARRIER OBJECTIVE :
A greatly experienced in AutoCAD/Draftsman Designer having Overall 12 years of Saudiarabia and Doha Qatar extensive experience with Multinational Companies on Oil & Gas Projects, Cross Country Civil, Mechanical, Electrical, Pipelines, Petrochemical, Power Plants and all phases of construction.
EDUCATION QUALIFICATION :
S. S.C. (Secondary School Certificate) State Board of Secondary Education 1993 Hyderabad, Andhra Pradesh, India.
TECHNICAL QUALIFICATION :
I.T.I (Industrial Training Institute) in Civil Draftsman. Honored with First Division with (95.5%) 1995 Hyderabad,
Andhra Pradesh, India.

DIPLOMA in Civil Draftsman from Indo British Academy Technical Institute1998 (Hyderabad).
COMPUTER SKILLS :
Operating System : Ms-Dos, Windows95 &Windows98, Windows XP, Windows7
Networking Operating Systems : Windows2000 Sever, XP Professional
Ms Office (Ms Word, Ms Excel, Power Point, Internet Concepts, Software, Hardware Installation).
AutoCAD (2D, 3D) from Graffiti Engg Solution, 1999 (Hyderabad).
OVER ALLWORK EXPERIENCE IN SAUDI ARABIA
CLIENT : SAUDI ARAMCO OIL COMPANY
COMPANY : RAJEH H.AL-MARRI & SONS COMPANY
(For Trading & Gen.Contracting) Dammam Abqaiq-31992, Saudi Arabia (KSA)
Designation : AutoCAD Draftsman Designer
Duration : Jan2002 to Dec 2007
- Projects : Shaybah Maintain Potential Projects, Project:-Utmaniyah Hawiyah, Haradh, Maintain Potential Projects.
Abqaiq, Khursaniyah, Harad/Madrika, Project : - Prp-Qatif, 24” Haramaliyah, Utmn Khuff Gas Projects
Manifa Drilling Island Project :-Oil, Gas Water Pipeline Construction, Plants & Refinery Piping, Electrical Works.
Project :-Khursaniyah Pipe Line & Communication Project, Pipe line Rehabilitation Phase –IV Project, She gum
Qatif pipeline Rehabilitation phase –V Project, Qatif pipeline Rehabilitation of phase VI. (Safaniyah to Juhima Project)
Project : - Qatif Junction 2 Pipelines (QJ-2 P/L), Safaniyah- Juaymah 1 Pipelines (SJ-1 P/L SEG.1, Seg.2, Seg.3 P/L)
Project : - Fahdilli Well Site Khursaniyah Projects (As Built Drawings)

Project : - Safaniyah-Juaymah Segment 1 Pipeline (As Built Drawings)
Project : -Qatif Junction 3 Pipeline (QJ-3P/L)

Project : - Implementing Subdivision Management such as House Construction, Subdivision facilities, operation

And management, maintenance and security of all subdivision projects in Region 1 & 2.Pipeline Rehabilitation
Phase-V-Contract-6600017980.
IFC WELL HEAD DRAWINGS :( ISSUED FOR CONSTRUCTION FROM SAUDI ARAMCO)
- Utmn Well-Head No-1701,1700 F/L,10”78 F/L
- Shyb Well-Head No-277 AT SAB-95.
- Hwyh Trunk Line-16”, 1101.
- 8”Fdil W-613 Pwi F/L Well-Head S-W.
- Lift a Dead Producer With a Cap Gas.
- Uthmaniyah Kuff Well-1849 Tie in R/H Uthmaniyah Khuff Well-1849 Tie in RH.
- (Local Control Panel H2S-42800 – Inter Connection-Electrical Drawings).
- Transmission Line Project EI Drawings.
- 8”Abqq W-930 Water Supply Line F/L (Isometric Piping Detail)
- Final Model Gas Well Production Line # 1068 & 1027
- Utmn Khuff Well-1844 Tie-In F/L Uthmaniyah Khuff Gas Manifold (BB-583637)
- Oil, Gas Water Pipeline Drawings,4Bend Pipeline Drawings, Isometric Piping Detail Drawings,
- Trust Boring Proposal Drawings.
- Plan for Thrust Boring
- Open cut Detail
- Schematic plan for Hydro testing Diagram
- Detour Plans with Procedures and Safety Procedures and Safety Pre-cautions.
- Road Crossing Details.
- Calculating Coordinates.
- Weld map for Tie-in (QA-QC DEPARTMENT)
- Preparing AS-BUILT Package for the Completion of the Project using Acrobat Professional.
- Gathering of all information’s and final details with coordination of the surveyor.
- Finalizing the scope of work and material take-off with Saudi Aramco Material coordinator of the Project.
- Arrangements of Drawings from Saudi Aramco
- Preparing drawing plan for civil works of telephone duck bank.
- Preparing detail estimates, analysis report and recommendations for the project.
- Preparing proposal for the project, responsible for project planning and material inquiry and preparing reports.
- Preparing daily & weekly progress reports, prepare Construction & Safety proposal(i.e.procedures,plans and
Drawing and AutoCAD Operator.
- AUTOCAD drawings plans/sketches of pipeline Rehabilitation Phase-V Projects and was
Done in accordance with the Scope of work, IFC Drawings and Saudi Engineering Aramco Standards.
- Cad Documentation and updating of protection/control plans & diagrams of the project.
- Preparing File and Documentation.
OVER ALLWORK EXPERIENCE IN DOHA, QATAR
COMPANY : CONSTRUCTION DEVELOPMENT COMPANY L.L.C.-(CDC)
P.O.Box-8388, Doha, Qatar
Designation : AutoCAD Draftsman Designer
Duration : Aug2008 to June 2011
- Projects: Al Fardan Towers#266, Kempinski Residences & Suites, Doha #295,Al Qassar Office Tower#291,
TwoPortoArabia#288,AlDanaGarden-III#268,PrivateVilla,CommercialBankPlaza#270,Villaand Majilis#267,WestBayComplex#246,WestBayLagoon-PackageH1-H2#243,18VillasResidentialCompound#237, MarriottHotelGulfHotel-RefurbishmentWorks#225,20StoreyOfficeBuilding#221,WestBayComplex-Package1A#220,Al Fardan Plaza#214,NewDohaInternationalAirport-Package F#211,NewDohaInternational Airport-PackageB#209,Ras Gas –Administration Building and Complex#198,AlSadd CommerialComplex,BMW Showroom andOfficeBuilding#191,QIMCOHeadquartersBuilding#185,JasmineComplex#178,AlBustan Complex#162,A,Fardan Center.
WORKING DRAWINGS:
Planning : Civil, Mechanical, Electrical, Transmission Line, Pipeline Working & Plumbing, Hvac Drawings, AutoCAD Shop Drawings, Oil, Gas Pipeline Drawings, Isometric Drawings, Hospital Drawings, Commercial Drawings, Building, Drawings, Apartments Drainage, Municipal Drawings, Details Drawings, Layout Drawings, As Built Drawings. Structural Steel Drawings, Fabrication Drawings, Roads, Highways & Bridge, Drainage, Sewerage & Earthworks Drawings, Firefighting fire alarm Drawings, Accurate Work Shop Drawings Floor Plans, Preparing House plans and Building plans in Charge in the preparation of all Subdivision Plans, House Plans, and Shop Drawings.
- Interior : Furniture, Fall Ceiling.
- Section : Foundation, Basement, Brick Wall, Rcc Linter, Slap & Parapet Wall.
- Elevation : Building, Compound Wall & Parapet.
- Details : Building, Compound Wall & Parapet Wall.
- Gis : Geometrical Information System:- Gis –based projects include computerized mapping, remote
Sensing, Gis analysis, database design, aerial photos interpretation, integration of Gis and Cad
Products into a Cad environment and internet map, engineering and scientific Cad drawing, database
Serving and pre-project and post-project product review.
- Develops and implements data capture and Analysis procedures from vector and/ or raster sources.
- Compiles and organizes environmental data sets in a GIS.
- Develops and maintains dynamic mapping and data via the World Wide Web.
- Provides drafting for civil design drawings using AutoCAD2009 or higher and
- CAD drawings converting into Pdf files and Pdf files converting into CAD drawings.
- Compiling and Organizing environmental data sets for GIS and CAD drafting.
- Where required, executes computer programming to automate drafting analysis.
- Integrates the Operation all referenced Hardware and Software within a networked environment for efficient project execution.
- Maintains, Organizes and archives existing and newly developed CAD drafting maps using relational
Database management systems.
- Supplies output of various maps and digital data products as needed for project specifications.
- Where required, executes computer programming to automate drafting analysis.
- Supplies output of various maps and digital data products as needed for project specifications.
- Where required, executes computer programming to automate drafting analysis.
- Integrates the operation of all referenced hardware and software within a networked environment for efficient
Project execution.
- Maintains, Organizes and archives existing and newly developed CAD drafting maps using newly developed
CAD drafting maps using relational database management systems.
- Maintains, the currency of drawings in accordance with specific Directions.
- Maintains, an Efficient & Effective Drawings service to internal and external client and associate.
1. FINAL MODEL GAS WELL PRODUCTION LINE # 1
DUTIES & RESPONSIBILITIES:
- And AutoCAD Draftsman in Engineering
- Section/Technical Department Prepare and Proposal Drawing for Presentational
- Approval of all Feasibility Drawings
- Projects of Architectural, Infrastructure Structural, Multi Store Building, Luxury Residential Apartments Drawings.
- Hospital Drawings, Commercial premise and Malls.
- Prepare Detailed Plan, Elevation, Section Ext.
- Sections for Constructions and Fabrication.
- Preparing and Updating the As-Built Drawings
- Of all Architectural and Civil, Mechanical, Electrical, Pipeline, Drainage Layout, Interior Designing.
- Review and update all construction drawings prior to the start any civil, electrical, mechanical construction and installations activities.
- Cad Documentation and updating of protection/control plans & diagrams of the Project.
- Knowledgeable in Adobe Acrobat Professional for As-Built Drawings..
- Preparing all 2D Micro station and 3D PDS Drawings.
OVER ALLWORK EXPERIENCE IN INDIA
- Overall in the Field of AUTOCAD DRAFTSMAN
- Adapt Things at Ease and Believe in Team Work
- Good Communication and Interpersonal Skill
COMPANY : BUILD-WELL CONSTRUCTION & BUILDINGS COMPANY
Duration : January 2000 to November2001 (Hyderabad/India)
Designation : AutoCAD Draftsman Designer
JOB PROFILE: As an AutoCAD Draftsman with Build-Well Construction & Buildings Company
I was involved in Architectural Detailed Drawings, As Built Detailed Drawings, and Shop Drawing,
Civil, Mechanical, Electrical, Interior Designing Pipeline, Drainage Layout, & All Submission Drawings.
PERSONAL ATTRIBUTES :( Teamwork, Handling Relationships, Leading or Influencing)
- To work effectively within a Team.
- To Be Part of Extended Teams in Production and Projects.
- Changes That is needed using Professional Judgment.
- Time Manage the Thinks with Professional Approach.
- To work Effectively under Pressure.
- Quick learner and logical Thinker.
- Hardworking Ambitious with good communication and interpersonal skills.
- Planning Positive role in the team and an ability to learn quickly & Confident Person.
- Self Motivation.
- Good Organization Ability.
- Patience and Perseverance.
- Good Logical Skill
Declaration:
I hereby declare that the above written particulars are true to the best of my knowledge and belief
I bear the responsibility for the correctness of the above mentioned particulars.

Thanking you,
(MOHAMMED MUZAFFAR ALI)
( * * * )
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4412989
Date & Time : 26th Jul 2011 8:37 AM (UTC)
IP Address : 124.123.100.199
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 AskTbDAT/3.12.2.16749 YFF35 Firefox/3.6.18
Predicted Country : India

[Unregistered]

Umar Faruk khan

CARRIER OBJECTIVE :
To work in reputed organization in challenging and competitive environment & put in my best possible efforts to achieve organization at goals

TOTAL PROFESSIONAL EXPERIENCE : 2.8 YEARS

TECHNICAL SKILLS :
CCNA, MCSE RHCE
SAP B1, SQL 2005, 8, R2 CRM 4.0.
REDHAT PROXY SERVER, TFS, VSS, IIS.
HARDWARE & NETWORKIN.
ORACLE 10G DATABASE
DSPACE

ACHIEVEMENT :
I WORKED ON TRA PROJECT.

PROFESIONAL QUALIFICATION :
1year diploma in DCA FROM BITS COMPUTER EDUCATON, in the year 2007
I year diploma in ACE (CCNA, MCSE, RHCE) form i-cat InfoTech institute Hazratganj Lucknow.
ACADMIC QUALIFICATION :
10th passed from U.P board Allahabad.
12th passed from U.P board Allahabad.
Graduation from purvanchal university jounpur.

OPERATING SYSTEM :
Window 98, Windows Xp professional Windows 7, 8 Server 2003,8
2000, Red hat.

PRESENTLY WORKING :-ITSL LIMITED 354 UDYOG VIHAR PHASE 2 GURGAON as a
Network Engineer from 12 March to till date.
Company Profile : -ITSL LIMITED. is a leading Information Technology consulting firm that provides superior IT solutions to our clients. With a long list of content clients from various industries, we have had experience in solving our clients’ business issues as per industry specific requirements. We have a domain expertise in different area e.g. ERP and automations of system, on demand software solutions, web design and development, SEO and total HR solution, automation of institutes and universities etc. Our industrial domain expertise are in Banking and finance, HR, retails and distributions, security system and logistics, production and healthcare etc. we mainly deals in different countries like India, Australia, Singapore, USA, Dubai, some countries of EU and from many other gulf countries.

We realize that understanding each client's needs is essential to provide quality service. The experienced professional at ITSL takes the time to understand your business, your approach, and the dictates of your environment. Whether you know exactly what you want or would like informative and innovative guidance, our experienced professionals will work with client every step of the way.
Job Profile : Network Engineer
Handling Client compliant.
Monitoring of network.
Keep up to date systems.
Data backup
Monitoring servers.

Privies Working :-AXIS COMPUTECH & PERIPHERALS PVT. LTD. LAJPAT NAGAR-II,
NEW DELHI , as SERVICE ENGINEER.

Company Profile :Axis Computech & Peripherals Pvt. Ltd. Partnered with Hewlett Packard as Premium Business Partner with Both Commercial & Consumer range of Products. We are also an Authorized Service Provider and AMC Partner for HP & Compaq Range of Products. Axis Computech & Peripherals Pvt. Ltd. has also been awarded with the distinction of being the Premier Partner for Education Sector in Delhi & NCR, working closely to offer a wide gamut of services and products, delivering world-class, cost effective solutions which lower the total cost of operation.
Axis Computech & Peripherals Pvt. Ltd. has maintained a demo centre Cum Showroom, enabled with the entire range of HP & Compaq products available on Display. Axis Computech & Peripherals Pvt. Ltd. has also started a service centre with HP trained Engineers in Delhi, covering the entire Delhi & NCR with a strength of over 25 Qualified Engineers and we are proud of our professionalism, expertise and the quality of our results. Our professional staff has always demonstrated their skills with outstanding accomplishments on highly demanding projects involving complex systems.

Job Profile : -
Corrective and Preventive action on customer complaint.
Responsible for Sample and layout Inspection report.
Calls handles of Hardware & networking related.
Problem analysis on daily basis.

TRAINING EXPERIENCE : RBNL BIG 92.7 FM. 6 MONTH INTERNSHIP.

PERSONAL DETAILS :
Father’s Name : Aqbal Ahmad khan.
Date of birth : 20 July 1990
Marital status :married
Nationality : Indian
Language Known :Hindi, English
Strength : Dedicated, Discipline, Cooperative
Hobbies :Internet browsing, Listening Music,
Email : farukk913 AT gmail.com,faruk780 AT yahoo.in

I solemnly declare that the statement made by me in this resume is correct to the best of my knowledge and belief.

Date :
Place :
[Faruk khan]