www.charismacareer.com CCPL Charisma Careers Pvt Ltd Vadodara : Piping Technology Training

[Admin]

Correspondence Course on Piping Technology
(Available whole of the year, Four months Duration, Year 2008)
Need for the course on Piping Technology in form of distance learning i.e. through correspondence has been long felt by the prospective and existing piping professionals. We have been actively involved in training engineers related to Piping, Process Equipments, Material Handling, Materials Technology, etc. since last 20 years. This correspondence course will initiate you to prepare and develop plot plans & equipment layouts so that you can attempt to prepare the piping layouts, their sizing, selection of components, design analysis and finally to understand the need of documents for piping erections, assembly, testing and inspections.
This correspondence course will target the following needs of the existing and prospective piping engineers;
Documentation related to Piping Technology in form of courseware
Interaction with piping professionals on regular basis using internet technology
Case Analysis / Problem Solving Methodology
Free Flow of Information to the Piping Engineers with the help of email newsletter
Coverage
Piping Technology
Introduction about Process Industries in India
List of Piping components used in Industries, their introduction, applications.
Local process plants, fabricators, engineering companies, consultants, and site Erection contractors.
Basic Engineering Knowledge on Engineering materials, Strength of materials, Fluid Mechanics etc.
Understanding of Process Flow, P&I Diagrams, Interpretations, Plot Plan & Equipment layout generation
Introduction to ASME B31.3, B31.4, B31.8, B31.1 and IBR and other codes related to Process Piping.
Selection of Piping Components (Flanges, Fittings, Valves, Supports, Expansion Joint)
Piping Layout, Pipe Sizing, Development of Isometric drawings Flow and Pressure Drop Calculations
Selection of Materials for Process piping components
Stress Analysis, Flexibility Stress Analysis
Introduction to Piping Flow & Stress Analysis Software
Fabrication, including Welding, particularly for piping components.
Inspection & Quality Control
Quality control and assurance for raw materials, components and during erection stages
Special Testing for Piping systems.
Non Destructive Examination of piping

Methodology
Technical Course Materials shall be regularly distributed, each fortnight, through registered post parcel, courier or through email (you can choose your option).
Problem Solving sessions will be held through emails.
Hand on practice of Piping and related drawing generation using AutoCAD (2-D Drafting) shall be imparted at the CADD Center and suitable certificates issued to all those who complete this additional course. Such practice and orientation session will be arranged for around 50 hours as per convenience of the participant with additional fee.
Case Studies shall be sent for study and participants shall be asked to submit their solutions. This will allow us to rate the progress of the participants and provide suggestions for improvements.
Monthly tests will be conducted and results shall be immediately mailed so that participants are able to gauge their progress, and adopt corrective means to improve on their weak areas of understanding.
Every participant must have an email ID for effective interaction.

About CCPL:
CCPL is a Scientific & Technical Consultancy group consisting of 3 divisions:
1. Courses & Training : Organizes courses, training programs, seminars, exhibitions.
2. Publications: Publishes Journal, Proceedings, Books on various topics like Pressure Vessels, Piping , Project Management, Pollution Control, Energy Conservation.
3. S&TC: Undertake Scientific & Technical consultancy, selection of technologies, innovations and related technological services for process plants

Who should attend
This program is useful for fresh & experienced engineers or engineers desiring to shift to piping engineering disciplines. So far engineers from RELIANCE, MECON, STEELCO GUJARAT, KTI, IFFCO, SABERO ORGANICS, TRANSPEK, STERLING GELATIN, FURNACE FABRICA , SULZER , SEARCH CHEM, LINDE PROCESS, PETRON, PSA , OMAN REFINERY, ESSAR CONSTRUCTION, SNAM OMAN, PDO OMAN, OMAN GAS, QATAR PETROLEUM, GULBRANDSEN CHEMICALS, SGS INDIA, FORBES MARSHALL, GNFC, EIL, CHENNAI PETROLEUM, ONGC and many other individuals have benefited from our regular courses. The course is continuously revised for the updated technology.

Duration: Approximately 4 Months.

Fees : Rs 20,000 per participant. Service Tax @ 12.36% (Rs 2472) shall be charged as extra. (Total Fee: Rs 22472), Indian Participant

Participants from outside of India may also contact www.charismaglobal.com

Registration :
Kindly send-in your application for the registration to the course by submitting a letter with the bio-data of the participant along with the registration fee in the form of Demand Draft drawn on any bank of Vadodara and in favor of Charisma Careers Pvt. Ltd.

Contact :
Charisma Careers Pvt. Ltd,
302 Sun Silver Aptt, 4th Floor, Nr Akota Garden, Productivity Road, Vadodara 390020, Gujarat, India;
Ph: +91-265-6616173, Mobile: +91-9974094156; Fax: +91-265- 6616172

Email: info@charismacareer.com ; grai_1999@yahoo.com ; nkroy@charismacareer.com

Website: www.charismacareer.com ; www.gramya.com

[Guest]

can u plz let me know the distance learning module of piping technology,minimum academic eligibility,course structure,fees.
thanks.
my email is dravsambare@gmail.com

[Guest-IJT]

Name : darshini.N
Email : darshudarsh44 AT gmail.com
Designation / Skillset : R&D trainee
msc biochemistry fresher

Resume :

Objectives :
Seeking a quality environment where my knowledge can be shared and enriched. Looking for an opportunity where I can improve my quality and technical skills and contribute significantly, using my acquired knowledge.
Educational Qualification :

M Sc Biochemistry – Kuvempu University (Shankarghatta) Shimoga.
B Sc (Biotechnology, Biochemistry, Microbiology) - St.Philomena’s College, Mysore. Mysore University.
Academic Details :
EXAM NAME OF THE INSTITUTE BOARD / UNIVERSITY AGGREGATE PERCENTAGE RESULT
1st Sem M Sc 74.9% “A” grade
2nd Sem M Sc 74.5 %
“A” grade

3rd Sem M Sc 73.6% “A” grade
4th Sem M Sc Result Awaited
B.Sc St.Philomena’s College,
Mysore. Mysore
University 69.7% First Class
IT Exposure :
Operating Systems : MS DOS, WINDOWS 98, 2000
Application Software : MS OFFICE, Internet Application
Analytical techniques :
Electrophorosis, PCR, Chromatography
v Academic Project
Organisation : University of Agricultural Sciences,GKVK.Bengaluru.
Worked under- Department of Plant Biotechnology section.
I have done project work on “Isolation & Molecular Characterization of Lactobacilli and its Beneficial Studies in Silage”.
Seminars attended :
Attended the National Seminar on “Challenges in malaria & other infectious disease reasearch” organised by Department of Biochemistry, on 3rd& 4th of May.
National workshop on”Usage of instruments for Nanotechnology Applications”in association with Sinsil International, Banglore .
Seminars Delivered :
Nuclear Magnetic Spectroscopy(NMR)
Enzyme Immobilization.
Acidosis & Alkalosis.
A paper presentatation on amylase production using oil cakes.

Reference :
Dr Rajeshwar.N Achur, Chairman
School of chemical sciences
Dept. Of Bio -Chemistry
Kuvempu university,Shankarghatta-577451
Shimoga
Karnataka (India)
E-mail :anr AT kuvempu.ac.in


Dr.G.J. Satish,
Lecturer,
Department Of Bio-chemistry,
Kuvempu University.

Declaration :
I do hereby declare that the information given above is true to the best of my knowledge.
Place : Mandya Yours Truely
Date : (Darshini.N)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4361655
Date & Time : 12th Jul 2011 9:47 AM (UTC)
IP Address : 117.230.128.18
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Predicted Country : India