www.samsungindia.com Samsung India Electronics Ltd Noida : Chief Engineer

[muthukalee]

samsungindia.com
Job Title : Chief Engineer/Manager

Qualification : BE/BTech/MTech/MS/PHD

Experience : 7+ Yrs

Technical Skills/Job Profile :
Expertise in software development & leading projects related to HDD drivers / recorders, File system handling, Video Codecs,
USB / Wireless Printer drivers, Photoprinters, Bluetooth protocol stack. Camcorders, MP3, MPEG 1 / 2 / 4 etc.
Relevant Experience is absolutely critical.Experience in Software Development Lifecycle and Software Engineering Standards, Practices and Guidelines is required.
Should have experience of Leading Projects / Team.

About us :
SISC was set up in October 2002 as a Software R & D Center for Samsung Electronics India in NOIDA. It has grown rapidly to more than 700 employees and targets to have 1000 employees by the year 2012.SISC is focused on embedded and PC software development for Samsung Electronics, in a variety of areas related to Analog and Digital TV, Monitors, DVD Players and Recorders, Audio-Video Players, Set Top Boxes, Camcorders, Notebooks and Desktops and other consumer electronics products related to Digital Multimedia.

Contact us :
SAMSUNG INDIA ELECTRONICS LTD.
C - 28 & 29,
Tower A, 8 - 10th Floor,
Sector- 62
NOIDA-201 301, INDIA
Tel. : (91-120) 4081234-36
Fax : (91-120) 6151212
vivek.joshi@samsung.com
http://www.samsungindia.com

[Guest-IJT]

Dear sir,

I am vijayakumar from salem,TN. Presently i working as a Tool Room Engg at Spicer India Limited at Dharwad.Tottaly i have 4.8 Years exp in same feild.Ss That i have attached my lattest profile in the mail.Please find the same.
Thanks & Regards,
Vijayakumar.P

VIJAYAKUMAR.P

Email : vijay.spicer AT yahoo.com

OBJECTIVE :
To pursue a career in the field of Engineering/Manufacturing which provides a challenging work environment and allows me to utilize my knowledge to contribute in the growth of organization. Holding 4+ years of experience in production line and having a well knowledge in Tooling Management activities.

HIGHLIGHTS :
Ø Lead the team to achieve the target of tooling cost reduction.
Ø Managing planning operation ensuring optimum inventory levels to achieve maximum cost saving without hampering the production process.
Ø Reduction tooling downtime and responsible for implementation of New ideas or Kaizen & maintaining 5’s.
Ø Taking care of Customer complaints and coordination with customer development.
Ø Handling the Manpower, Process control, TPM, developing Jig & Fixtures.
Ø Technical coordination with vendors regarding tolerances and other factor.
Ø Maintaining the Inwards using BAAN IV software.
Ø Documentation of QS 9000 & TS 16949

EXPERIENCE :
2006 To 2009 Tool Room Engineer Hosur, Tamilnadu.
M/s Spicer India Limited
2009 To Present Tool Room Engineer Dharwad, Karnataka.
M/s Spicer India Limited

AREA OF EXPERTISE :
Ø Supervising overall Tool room activities implementing effective techniques to bring efficiency in production process by through modifying tools, jigs& fixture.
Ø Designing Jigs & Fixture for various operations like drilling, milling, turning, and special purpose machine like broaching, grinding and multi station VMC fixture with Auto CAD.
Ø Data monitoring of cutting tools life and its regrinding efficiencies.
Ø Expertise in Tools and Jigs & fixtures related problem solving activities in production department.
Ø Regrinding of all kind of cutting tools like spline broaches, surface broaches, milling cutters, spot face cutters, Counter Bore Cutters and drills (HSS and Carbide).
Ø Performing all kind of tooling related works such as drafting, surface grinding works, lathe works etc.,
Ø Jig & Fixtures Development with Auto Cad 2006.
Ø Knowledge gained about “Inventory Management System”
Ø Improve quality standards & achieve maximum cost savings.
Ø Ensure supplier quality standard And Jigs & Fixtures Standardization & Servicing
Ø Focus on reducing rejection & rework related to tooling.
Ø Ensuring the availability of the Tooling requirements as per the Monthly production plan, and availability of tools for next day plan, using with tooling daily check sheet.
Ø Multiskilling to operators and manpower handling in tool room.

ORGANIZATION PROFILE :
Ø M/s Spicer India Limited was established in 1993 to manufacturing axles, driveshaft and universal joints. The company is a joint venture between DANA holding corporation, USA and Anand Automotive Systems, having five plants across India.
Ø The product is supplied to leading automobile Manufacturing GM, Ford, Hino and Chrysler.
Ø The Domestic customers are Ashok Leyland, Tata Motors, AMW and Force Motors.
Ø QS 9000, ISO/TS 16949, ISO 14001 and OHSAS 18001 certify M/s Spicer India Limited.
ACCOMPLISHMENTS :

Cost Saving

v Poke Yoke implementation in Spline Broaching, by implementing this reduce the accident and cost savings Rs.4Lakhs/Annum
Product Development

v Fixture Design in Surface broach grinding, by implementing this cost saving Rs.1 Lakhs/Annum.
Planning

v Introducing using of Step Drills at VMC for improving productivity (200 to 600no's/shift).
TRAINING :
Ø Special intensive Full time classroom training for 1 month by Anand Group.
Ø TPM, 5's, Poke Yoke, TS 16949, Safety, Jig & Fixture.
EDUCATION :
The Thiagarajar Polytechnic College Salem
Diploma in Production Engineering - First Class 85.0% April 2006
The Gugai Hr. Sec School Salem
SSLC - First Class 88.0% March 2003

[Guest]

RESUME
AMIT SHARMA
amitkumarsharma10 AT yahoo.com
Carrier Objective :

To be an efficient Engineer successfully attaining assigned target and strive to learn as much as possible so as to stay on the Acme of my field
Technical Skill :
1. Languages : - C, Embedded C.
2. Operating Systems : - Linux.
3. Microcontroller : - 8051.
4. Communication Protocols :- TCP / IP, I2C
5. Tools : - Keil Compiler, Top View Simulator, Protous.
Educational Qualification :
- Completed Advanced Course in Embedded Systems from Vector Institute, Hyderabad after clearing All India Entrance Test .
- Bachelor of Engineering (BE) in Electronics & Communication From Shri Ram College of engineering and Management, Gwalior (M.P). In 2010 with 63.2%.
- Secured 61% in higher secondary school from Boys Govt. higher secondary school Kailaras, Morena (M.P).
- Secured 55% in High School Examination from Boys Govt. High school Kailaras Morena(M.P).
Experience :
Presently working in BIHARI AGRO FOODS PVT.LTD with monitoring plc based machines.

Training undergone so far :
1. Training at Bharat Sanchar Nigam Ltd. MORENA
2. Training at Doordarshan Kendra Gwalior
Project undertaken :
- Major Project on Path Finder Robot.
Description : If there is any obstacle in front of it then it change its direction automatically. It is based on micro controller.
- Minor project on Automatic Adjustable Timer With On/Off Condition
Description : It has relays by which we can adjust the time according to our
Requirement. It has greater advantage in saving of electricity.

[Guest]

sir/mam
ths is richa sharma.i have done b.e(electrical & electronics engg) with 69.3%..
wanted to apply for a job.kindly reply ie there is any vacancy

[Guest]

Jagdish sharma
E-Mail : jgdsh_sharma AT yahoo.co.in
In quest of challenging assignments in Project Running / Maintenance & Coordination with an organization of high repute.
PROFESSIONAL SNAPSHOT
- A Dynamic professional with Three year of valuable experience in maintenance, Planning, running, Coordination, etc.
- Ability to work in multicultural environment with keen interest in learning new things.
- Capable of setting priorities, developing a work schedule, monitoring progress towards goals, and tracking details / data / information / activities.
- An effective communicator with excellent skills in building relationships; possess strong analytical, problem solving and organisational abilities.
OCCUPATIONAL SCAN
- I have worked in M/S SHREE RATHI STEEL DAKSHIN LTD Khuskhera Alwar (RAJ) as a ASSISTANT ENGG. From July 2OO8 to june 2010.
- Currently I am Posted in M/S PASHUPATI CASTINGS LTD Aligarh as a ELECTRICAL ENGG. from July 2010 to till date
- Salary drawn- 28000/ rs. only per month .
KEY DELIVERABLES
- Accountable for managing operation & maintenance.
- Managing proactive maintenance in steady state.
- Evaluating and developing applications of new processes and methods into products.
- Recommending design concepts/modifications based on requirements.
CONTROL
- Operation of PLC, Trouble Shooting ,Scheme Checking as Per logic .
- Bus bars and Circuit Breaker,Transformer,Hydrulic systems.
- Ac drive, Dc drive , Interlocking of electrical equipment.
- Star Delta Starter, DOL Starters , Motors,ups,.
EDUCATIONAL CREDENTIALS
- B.Tech. in Electrical Engineering from Radha Govind Engineering College, Meerut, Uttar Pradesh Technical University in 2008.
- Class 12th from HARYANA Board in 2003.
- Class 10th from HARYANA Board in 2000.
SUMMER INTERNSHIP
- National Thermal Power Corporation (N.T.P.C.), Tanda, U.P.
C.H.P.
Description : In coal handling plant, about working of Conveyor, Screen House, Crusher House.
Switchyard
Description : 132 KV Switchyard Containing Circuit Breaker, Transformer, Line Earthing Switch , Arrester, Isolator, CT, VT, etc.
IT FORTE
- Ms-Office.
- Window XP/98

[Guest]

RAJESH KUMAR
Email : rkgeit AT gmail.com

OBJECTIVE :
To gain knowledge and grow with the organization by putting in the best of my abilities and skills.
EDUCATION :

- B. Tech in Electronics & Communication Engineering (2004-2008) from Grafic Era Institute of Techonology, Dehradun affilated to H.N.B Garhwal University with 67% aggregate.

- Passed intermediate from I.S.C Board with II nd division.

- Passed high School from I.C.S.E Board with II nd division.

AREA OF INTEREST :

- Telecommunication
- Analog Integrated Circuit
KEY SKILLS
- GSM Architecture
- GSM Channels
- GSM Services
- Surveys (Rf, Microwave, Derive Test.)
- Operation and Maintenance
- BTS Installation and Commissioning
PROJECT AND SEMINAR
- “Microcontroller based RADAR system”
- Seminar on “Global System for Mobile Communication”.

TRAINING :
- Summer Training from IIT Roorkee on VHDL.
- Undergone Training in B.S.N.L at Haridwar.
- Undergone Training on GSM 2.5 Technology in “TNS”, Secondary
Vendor Company in Noida.
WORK EXPERIENCE :
- Working experience with Mechanical & Industrial Deptt. in IIT Roorkee as a JRF in a project entitled “Effect of Low Frequency Vibration on Human Comfort”, Under this project I was concern to data collection, recording and monitoring the Instruments, etc.
- Working in Earthquake Engg. Deptt. at IIT Roorkee in a consultancy project entitled “Preparation of Seismic Design Manuals for Earthquake Disaster Mitigration”, Under this project I was involved with preparation of documents and figure work.
KEY STRENGTHS :
- Imbibe with highly ethical and moral values.
- Team spirit
- Focused
- Discipline
EXTRA CURRICULAR ACTIVITIES :
- Active Participation in blood donation camp.
- Event organizer at school and college.

[parwesh]

Looking for a middle level position as a product management engineer.
Willing to work & enhance my experience in vendor development, product design & design for manufacturing.
Summary
- Worked with Beetel Teletech Limited as Executive Engineer (Product Development) for 4.5 Years.
- Pursuing PGDBM (OPERATIONS) from Symbiosis Center for Distance Learning(SCDL, Pune)
- B.Tech in Electronics & Communication Engineering.
- A keen learner, team facilitator, diligent and meticulous.

[Guest]

RESUME
SANDEEP
E-Mail ID- sandeepsiwach_ghn AT yahoo.co.in

CAREER OBJECTIVE :
To continue to the growth of the organization and rise to a position of
eminence by employing a judicious mix of my skills, abilities, creativity,
hard work and intelligence. To learn and to give back my learning’s in order
to ensure a mutually rewarding experience.
Academic Education Qualification :

- Matriculation from HBSE.(2004)
- Senior Secondary from HBSE.(2006)
- Diploma in Computer Engineer from
SBTE (HARYANA) (2007-2010).
- BCA Pursing from EIILMU.
Technical Education :
S.No Institute Diploma \ Certificate Duration
1. Radiance Institute of Computer & Education Gohana (Sonepat) Hardware, Software & Networking One Yrs
2. Zion Institute of Computer & Technology Gohana (Sonepat) Desktop Publishing Three Months
3. Cad Zone Sonepat AutoCAD Professional Designer Three Months
4. The Institute of Information Technology Pvt. Ltd. Ambala Cisco Certified Network Associate Three
Months
Experience :
- Three months Working in Hindustan Unilever Limited Distributor
In Gohana as the post of Computer Operator and H\W & N\W
Engineer.
- Three months Working in LG Service Center In Sonepat As the Past of CCO & Computer H\W & N\W Engineer.
- Today working in Bharatgas Distributor In Farmana (Sonepat) as the Post of CCM.
Seminars Delivered :
- VB 6.0
- NETWORKING
- INTERNET WEB DESING
Technical Skills :
Basic Electronics, All Operating Systems Installation & Operating, Software Installation, PC Assembling, Hardware & Networking, Internet, MS Office, HTML, DHTML, Visual basic, C, C++, Oracle, Photoshop, PageMaker, Coral Draw, AutoCAD, Unifi, Maintenance & Troubleshooting.

Projects Undertaken :
1.)
- PROJECT TITLE- School Management System
- DURATION- 2 Months
- TEAM MEMBERS- 4
- FRONT-END – VB 6.0
- BACK-END – MS-ACCESS
and keeping the records of student, staff & other employees.
2.)
- PROJECT TITLE- Hospital Management
- DURATION- 2 Months
- TEAM MEMBERS- 3
- FRONT-END – VB 6.0
- BACK-END – MS-ACCESS
- DESCRIPTION- This project helps in management of Hospital adding and keeping the records of present status & manage records of the
Strengths :
- Hardworking and Punctual
- Positive Thinking
- Highly Ambitious
- Socially Adjustable
- Very Disciplined and Responsible

[Guest]

Sir i am now working with elin electronic ltd . I have knowledge of all pcb making m/c operating and all program making and general maintenance sequencer and vcd m/c

[Guest]

i m looking for minor training schedule held by u in different iit

[Guest]

My Qualification is M.Sc. Electronics. if u have any requirement, then please call me.

.

[Guest]

SANJU
Email :-sanjudiwakar09 AT Malcolm
OBJECTIVE :-
Aim to achieve professional experience for personal growth look to an organization in which I can opportunity to do my best.
EDUCATIONAL QUALIFICATION :-
- 10th Passed from U.P Board, Allahabad with 2nd div. in year 2008.
PROFESSIONAL QUALIFICATION :-
- Three year Diploma in Electronics Engg. from Board of Technical Education Km. Mayawati Government Girls Polytechnic Badalpur, G.B.Nagar
- 1st year : 60%
- 2nd year : 67%
- Final year 68%

SUMMER TRANING :-
- Four week micrometric Grinding Technology Ltd., Ghaziabad.
PROJECT :-
2nd year : Water level indictor, half wave and full wave Rectifier.
Final year : Digitally Controlled Function Generator.
WORKING EXPERIENCE :-
- Presently working with PARKER OVERSEAS , Noida as a Quality Engineer from April 2011 to till date.
Which Manufacturing Inductor, SMPS, Choke, Current Transformer, Etc.
JOB PROFILE :-
1. Process control FQC and IQC Material Handle quality problems for prime material.
2. Calibration and Operation of all testing equipments and instruments like Automatic Transformer tester, Portable LCR Meter and manufacturing machines etc.
3. To Prepare Test Report and MRN.and Match FG according to the MIS.
4. Knowledge of Bar code Printer. Monitoring the line, identifying & solving problems.
5. Prepared all the required ISO documents for quality department.
SYSTEM KNOWLEDGE :-
- 5s-Implement the 5s on shop floor and train to all make it in daily habits.
- Kaizen-Do the continuously improvement on shop floor to make done by easiest path.
- Poka Yoka-To make sure all work done by any other loss and accident make it mistake proof.

PERSONAL DETAILS :-
Father’s Name : Mr. Vijay Pal Singh
Date of Birth : 10th Dec. 1991
Sex :
Nationality : Indian
Religion : Hindu
Marital Status : Unmarried
Language Known : Hindi & English
DECLARATION :-
I hereby declare that all the information is true and correct to the best of my knowledge.
Date :
Place : (SANJU)

[Unregistered]

CURRICULUM VITAE
Goutam Kumar Chourasiya
Email : goutam.kumarchourasiya AT gmail.com

Career Objective :
As an Engineering Graduate my objective is to be at the position where I can make optimum use of my knowledge acquired during my graduation and sharpen my skills.

Educational Qualification :
Name Of Course Board / University Institution Year of passing Percentage
BE (EC Branch) RGPV University , Bhopal Scope College of engg.Bhopal 2010 67.30%
Intermediate (10+2) M.P. Board Deep vidhya Niketan School Mandideep 2006 59.50%
SSC(10th) M.P. Board Deep vidhya Niketan School Mandideep 2004 67.00%

Industrial Tanning :-
Major Training :-4 week major training from railway was the organization where I completed my major training and learned about communication system in railway.
Minor Training :- 2 week training from railway was organization where I completed my minor training. And learned about communication system in railway.

Experience :
** Presently working in SHAKTI OPTO-TELELINKS since last 1 Year as a Designation of Production Engineer .
Job profile :
** Inspection and supervision of ideal process which should follow,
** Quality of materials. Specifications of materials & dispatching all materials at site.

** 1 year experience in Crompton greaves ltd. Mandideep as a Designation of PRODUCTION ENGINEER.
Job profile :-
** Prepare of manual data sheet for required raw materials.
** Supervision of working process and handle the team of technicians.
** Responsible for working of all manufactured product

** 1 year experience in CROMPTON GREAVES M-7, D-5, INDUSTRIAL AREA MANDIDEEP. In contract Maa Bhawani Enterprises Since as a TRANEE ENGINEER.
Job profile :-
** Responsble for making H.S.-43 motor coil interlayer & insulation.
** Maintain record Receiving & dispatching material
** Maintain the production record`s by computer
** Quality control and prepare the invoice challan Detail

Computer Knowledge :
** Microsoft Office
** Internet Surfing
** Accounting

Behavioral Outlook and Strengths :
I. Willingness to learn and update knowledge.
II. Ability to organize to get things done.
III. Positive attitude
IV. Ability to work in a team with high level of involvement

Hobbies :-
** Listening Music.
** Watching Movie.
** Long Drive.

Personal Details :-
Name Goutam Kumar Chourasiya
Father’s Name Mr. R. P. Chourasiya
Mother’s Name Smt. S R Chourasiya
Date of Birth 29 Jun 1988
Languages known Hindi, English
Gender Male
Marital Status Single
Nationality Indian
Email-IDs goutam.kumarchourasiya AT gmail.com

Deceleration :-
I do hereby certify that the information provided above is true to the best of my knowledge and belief. I further state that I shall keep the Institute informed of any changes in the information provided above.
Date _______
Place _______
(Goutam Kumar Chourasiya)