ARM Embedded Technologies Pvt Ltd Bangalore : Hardware Design Engineer

[muthukalee]

Design Engineer

Job ID # : 963
Country : India
Location : Bangalore
Job Category : Hardware Engineering
Employment Type : Experienced Professionals
Division : Processors Division
Department : Processor Division - Core Implementation

Job Description
Introduction
The Processor Division develops high performance CPU cores that lie at the heart of many of today’s digital devices. The implementation team is responsible for ensuring that all ARM IP can be implemented to provide high performance and low power silicon solutions.

Job Purpose
The Cores Implementation team drive the standards and methodology behind producing best in class high performance and low power ARM cores and systems in silicon. The group is responsible for ensuring that the IP can meet the requirements of the ARM partner base on cutting edge deep sub-micron processes whilst driving advanced implementation methodologies using the latest EDA tools.

In addition this group is responsible for specification, design and fabrication of ARM based test chips used for demonstrating the capabilities of ARM intellectual property, resulting in the testing and analysis of real silicon.

This is a challenging role, working with the team to successfully deliver while building the competence in latest design techniques on the newest CMOS processes. The role also involves interaction and working with customers, EDA vendors and other ARM engineering groups around the world.

Key Accountabilities/Responsibilities
• To work with the team to implement and verify designs of varying complexity using suitable ASIC flows
• To continually works towards improving the implementation methodology and design flows within ARM
• To work along with other divisions of ARM to help improving other internal IP offerings
• To work with various EDA vendors to improvise the methodologies and develop solutions for advanced
technology implementations

Job Requirements
Education & Qualifications
• Bachelors or Masters in Electronic/Electrical Engineering
• 1-3 years of experience in VLSI

Essential Skills & Experience
• Experience of synthesis, place and route flow to manufactured silicon using any of the industry standard tool set.
• Experience in static timing analysis (STA) and timing closure techniques.
• Good understanding of IR and signal integrity issues and analysis techniques.
• Knowledge of physical sign off like DRC, LVS and DFM techniques.
• Good scripting skills, preferably Perl or TCL.
• Ability to work collaboratively with multiple design centre’s across multiple time zones

Desirable Skills & Experience
• Knowledge of ARM CPU architecture and core implementation
• Understanding of low power and high performance implementation techniques
• Understanding of CPU based system design and validation

Interpersonal Skills
It is essential for the successful applicant to :
• Be motivated to accept a variety of responsibilities as a part of contributing to team’s success
• Demonstrate a positive attitude and respect for all members of the team
• Excellent communication skills : listening, understanding and persuading
• Good interpersonal skills to enable networking both internally and externally to ARM

Contact us :
ARM Embedded Technologies Private Ltd
Level III, Salarpuria Touchstone
Marthahalli-Sarajapur Outer Ring Road,
Varthur Hobli,
Bangalore-560 103

[Guest-IJT]

Esakki Raj
RESUME
Email id :esakkiraj23 AT gmail.com

OBJECTIVE :
My intention is to build a successful career with winning corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential.

EDUCATIONAL QUALIFICATION :
COURSE INSTITUTION YEAR OF PASSING %SCORED
B.E(IV ECE) Jayaraj Annapackiam C.S.I. College of Engineering. Nazareth, 2011 75.14%
H.S.C Sokkalal Higher Secondary School Mukkudal
2007 78.25%
S.S.L.C Sokkalal Higher Secondary School Mukkudal 2005 87.4%

MINI PROJECT :
Digital Meter Using Microcontroller
MAIN PROJECT :
Satellite Image Contrast Enhancement Using Discrete Wavelet Transform and
Singular Value Decomposition

AREA OF INTEREST :
- Digital Image Processing
- Optical communication
- Digital Electronics

TRAINING :
- All India Radio
- Eye power(Wind mill)

TECHNICAL KNOWLEDGE :
- Operating system : Windows XP
- Languages : Basics C,
- Design packages : Microsoft office, Adobe Photoshop.

Strengths : Hard working, Sincerity, Listening Skills.
Languages known : English, Tamil

I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Place : Pappakudi yours sincerely,
Date :
( ESAKKI RAJ .S)

[Guest]

E-mail : madhubalagopee8 AT gmail.com
G.MadhuBala
Qualification : BE Electrical & Electronics Engg.

Career Objective
To work in an organization where my skills and competence can be used to the maximum, and to constantly update my knowledge, thereby leading to rapid growth along with the organization.
About Myself
I am a hard working and dedicated person, with an altruistic character, which helps me work efficiently with optimism and enthusiasm.

Academic Records
Course Institution Board / University Year of Completion Marks % / CGPA
B.E Mahendra Engineering College, Namakkal. Anna University [CBE] 2011 84%
D.E.E.E Thiagarajar polytechnic College, Salem. State Board Of Technical Education 2008 93.3%
S.S.L.C Gugai Higher Secondary School , Salem. State Board 2005 86.6%

Software exposures :
Operating systems : MS- Windows
Applications : MS Office, Auto Cad.

Programming Languages : C, C++.
Fields of Interest
- Micro Processor, Protection and Switchgear.

Project Work Undertaken
- Project name : “Road Ways Speed Management System”(Diploma project)
- Team size : Six.
- Duration : 3 months.
- Description :
o The main objective is to find out the vehicles speed on road.

- Project name : “Automatic Room Light” (BE Mini project)
- Team size : two.
- Duration : 3 months.
- Description :
o The main ojective is to control the electrical and electronics equipments and power consuming.

- Project name : M-Payment using SMS(BE main project)
- Team size : Four.
- Duration : 4 months.
- Description :
o The money transaction is done through SMS.

In plant training
Company : Mega Win Switch gear.
Day : 15 Days.
Observation : Relays, Circuit breakers, panel boards, current transformers.
Company : Dalmia Magnesite.
Day : 15 Days
Observation : Magnesite processing, Process of electrical correlation,
Power distribution system, Bricks plant.
Company : Samandam Spinning Mills.
Day : 5 Days
Observation : Sensors, Wiring, operations of mill house.
Company : Mettur Thermal Power plant
Day : 4 Days
Observation : Processing of power plant, transformers, and circuit breakers.

- Participated on “Applications of Nano technology” on 24th April 2010.
- Participated on “PCB Design and Software” on 31st August 2010.

Extra curricular activities :
- School first in Social Science at tenth standard.
- Member in Indian Society of Electrical and Electronics Engineering.

Hobbies :
- Listener to Music.
- Reading Books.

[Guest]

CURRICULUM VITAE
HARISH.M.R
Email : mrharish.amc AT gmail.com
OBJECTIVE :
Looking for a challenging opportunity in an enterprise organization where I can exercise my expertise and knowledge that fosters quality, creativity and continuous learning and growth of the organization and personnel.
PROJECT :

Project 1. Title : “GO SAFE” (Intelligent Automobile)
Synopsis : Since the inception of cars in the market till today, car technology is advancing day-by-day. Like any other technology invention, the technologies used in cars have changed tremendously over time. Car technology is updated constantly, in an effort to enhance the comfort levels. That is why, every year, we find new car models arriving in the market. But is it SAFE- Yes, your answer is here, we have proposed a module 'Go Safe' which can take care of itself and also employs many gizmos to support its being.
Project 2. Title : “RF Based fire fighting robot for relief operations”
Synopsis : “The Fire Fighter Robot” has been designed for relief operations and mainly focuses on rescue purposes. It can rescue any human being from situations like fire related accidents without direct involvement of fire fighting personnel and endangering any other human life.
TECHNICAL SKILLS :
- Programming Languages : Assembly language- 8051, 8086,Embedded c
- Electronics : Basics of VHDL/Verilog ,Logic design, Analog Electronics
- Operating System : Windows 98/2000/XP
- Software Skills : MS Office (Word, PowerPoint).
QUALIFICATIONS :
Qualification Institution University Percentage Year of Passing
B.E AMCEC,Bangalore VTU, Belgaum 65.02% 2011
Diploma SVKP, Bangalore BTE, Bangalore 61.36% 2008
SSLC GJC, Mulbagal KSEB 52.96% 2005
ACHIEVEMENTS :
“Best student achievement award for the academic year of 2010-2011 “
Technology Competitions/awards :
Designed & built the following Robots :
1. Line Follower Robot
2. Multi Terrain Robot
3. Sandwich Robot
4. Amphibian Robot
Certificate of Merit :
Aavishkaar - Robotica MS Ramaiah institute of technology, Bangalore.
CMR cultura – Robotics CMR institute of technology, Bangalore.
Impetus’10 – Robo Wars IEEE UVCE, Bangalore.
Manthan 2010 – Line Follower Bangalore Institute of Technology, Bangalore.
Vertechx 1.0 – Line Follower MVJ College of engineering, Bangalore.
“Secured 3rdPlace at METAMORPHOSIS VTU’s 1st ever Inter- Collegiate Technical Fest”
Certificate of Participation :
Daksh 2010 – Robo Olympics Sastra University, Tanjore.
Drestein 2010 – Amphibian Saveetha Engineering College, Chennai.
Gravitas 2010 – Line Follower VIT University, Vellore.
Participated in SRISHTI 2010 organized by AKHIL BHARATIYA VIDYARTHI PARISHAD KARNATAKA an State level PROJECT EXHIBITION & COMPETITION for Engineering Students at SRI SIDDHARTHA Institute of technology, Tumkur.

[Guest]

CURRICULUM VITAE
TUKARAM DHULAPPA Y.
E-mail Id :- stdtukaram AT gmail.com

CAREER OBJECTIVE :
To achieve a challenging position in esteemed Industry that provides ample opportunities to learn and contribute innovative ideas, ensuring credible performance that leads the reputation on to a high pedestal.

TOTAL EXPERIENCE :- ABOUT 3 YEAR IN AUTOMATION.
PRESENT ORGANISATION :
Systech Automation Systems (www.systechautomation.com)
Designation :-Development & Testing Engineer.
Experience : - 1st Nov 2009 to till date.
Department :- Instrumentation & Controls

Systech is leading manufacturers of microcontroller based standard and custom-built instruments.
Till date developed / manufactured wide range of instruments / equipments which involve mechanical, electrical, electronics fabrication and other manufacturing processes.
Well-equipped workshop with adequate machinery and equipments for production and inspection of critical equipments / components / assemblies as per specifications.
Built capability of designing, engineering, procurement, installation & commissioning of automation projects. We have in house PCB Artwork design facility, hardware and software design facility to provide the in time service.
Also trade in the field of Instrumentation, electronics, electrical & pneumatic.
Eexpertise is in instrumentation, PLC, control panel designing and PLC based automation projects.
The profile includes Hardware design, testing, Calibration, analysis & repair of Process Indicators, Controls & Instruments; Tracing circuit, Analyzing fault & repairing; panel testing, drive parameter setting and feeding.

Job Profile :-
- Proficient in Microcontrollers based systems architecture, Analog & Digital Circuit design..
- Hands-on experience in testing/debugging of circuits and modules using Oscilloscope.
- Experience in Hardware design and knowledge of firmware development.
- Testing, Calibration, Analysis & repair of Process controller instruments.
- Knowledge of PCB-Design Using PCB CAD Software.
- C-Language programming Using Kiel Software.
- Analyze the circuit by applying input and rectify problem.
- Making final test report and calibration report of instruments.
- Hands-on knowledge of basic communication protocols RS232, RS485, MODBUS,etc.
- Attend Customer Complaints to avoid any failure for products.
- Resolve recurring Complaints by taking all corrective and Preventive Actions.
- To Ensure Customer Delight by Timely, Complete, Error – Free and Convenient Installations, Servicing, Trouble shooting, Documentation.
- Tracing circuit, analysis, Evaluate fault & repair.

PROJECTS HANDLED :
- INDUSTRIAL VISITS :
Maruti Suzuki Ltd, Gurgaon. : (2 channel temp. scanner + 1 counter)
Hero Honda Ltd, Gurgaon. : RS-485 comm. Using Delta Controller
Alicon Castalloy Ltd, gurgaon, pune : (3 Channel temp. scanner).
Enkai Castalloy Ltd, Pune. : Production Target displays.
Esses Eltec System Pvt. Ltd. Hyd. : Alarm Anounciator
TATA Autocomp, Hinjewadi : Data Acquisition system (Paint shop).
- Pneumatic Projects.
- PLC Panel Projects.
- Control Panel Projects.

Knowledge Gained In This Progress Technology :
- Knowledge of Thermistors, RTDs, Thermocouple, Analog & Discrete Transducers , Flow, Level, Load, Pressure, Logic circuit, Digital Design, Temperature transmitters, Proximity switches, Thermostats.
- Knowledge of power electronic devices, converters, drives, power supplies and control electronics.
- Working knowledge of the design, development and analysis of magnetic sensors (LVDTs), relays and actuators (solenoids, Torque Motor)
- Calibrating & Testing Process Control Instruments, Tracing circuit, analyzing fault & repairing.

PREVIOUS ORGANISATION
Intact Automation private(www.intactautomation.com)
Designation : - System Engineer.
Duration- July 2008 to Oct 2009.
Intact Automation is Authorized SYSTEM HOUSE & SERVICE CENTER of SIEMENS. We also provide industrial training on Panel Designing and various PLC for engineers of several leading companies.
Intact Automation Ltd. Pune is Engineering Company engaged in sectors like Power, HT/LT Switchgear, and Industrial Automation. Company having vender of Siemens, ABB, Conserve.
On Company Payroll I am worked For SIEMENS LTD. KALWA for below mentioned works.

INDUSTRIAL VISITS :-
1) JSW Jaigrah port 2) CGPL mundra
3) Adani Power Ltd 4) KPCL Saswad
5) Reliance Energy 6) BARC Kalyan
8) Essar Hazira 9) Cipla Ltd Mumbai.

Job Profile :-
- Handling soft starter repair center of SIEMENS.
- Specialist SIEMENS soft starter repairing, testing, analyzing, servicing. Along with ACB and all switchgear products.
- Experience in soft starter problem troubleshooting.
- Repairing, To Ensure Customer Delight by Timely, Complete, Error – Free and Convenient Installations, Servicing, Trouble shooting, Documentation.
- Commissioning & programming of Siemens soft starter.
- Attend Customer Complaints to avoid any failure for Soft starter,
- To ensure availability of all the pre-requisites like machine down time, work permit, Materials & Manpower.
- Conduct all need based activities to ensure Customer Delight.
- Resolve recurring Complaints by taking all corrective and Preventive Actions.
- After site completion reporting to senior executive.
- Provide adequate Training to Clients and ensure smooth handover of Sites.
- Manage Preventive Maintenance, Technical Support to Customers, Breakdown Handling and resolution of Customer Complaints.

Knowledge gained during Automation Field in Progress Technology :
- Experience on parameterization, Commissioning & Repairing of Siemens softstarter.
- Troubleshooting problems of Air Circuit Breaker, MCCB & switch gear products.
- programming knowledge of Siemens (Siemens S7-200, S7-300)
- Having knowledge of SIEMENS PCC& MCC Panels.

AREA OF INTREST :
- Analog Circuit, Digital Circuit & Mix Circuit Design, Testing & Analysis.
- INDUSTRIAL INSTRUMENTATION Repairing, Testing & Commissioning.
- PCB Designing.
- C-Language programming using Kiel software .

ACHIEVEMENTS :
- Four Month Course in C, C++ Programming language (from BGI Information Technology Hyderabad.).
- PCB Designing (Working on PCB-CAD Software).
- SIEMENS PLC Overview & simple programming.

TECHNICAL QUALIFICATION :
- Complete Bachelor of Engineering degree from RURAL ENGINEERING COLLEGE, BHALKI in the trade of Electronics & Communication Engg. From the board of Vishveshwarai Technological University, Belgaum with 2st Division.

EDUCATIONAL QUALIFICATION :
- Passed Higher Secondary Exam from P.U.C KARNATAKA, Board in 2002 with 2nd Division (secured 52.43%).
- Senior Secondary Exam from S.S.L.C Karnataka, Board in 2000 with 2nd Division Passed (Secured 58.20%).

COMPUTER SKILLS :
- Operating System : Microsoft Windows 98/XP, Wndows7
- Software language : C, C+ +, Kiel, Dip Trace.
- Elective Preferred : Operating system, Radar System,
- Embedded System, satellite communication.
- Working Knowledge of INTERNET.

[Unregistered]

SD. IMROZE
Email : sdimroze AT gmail.com

Objective :
To carry on my passion for renewable energy by working as an Engineer in R&D and Renewable Energy Analyst in a group of highly skilled individuals dedicated to developing the next generation of solar and wind energy.

Employment Experience :
** Job Title : Design Engineer
** Company Name : suchit technologies
** Industry of the Company : Manufacturing
** Functional Area of the Job : R&D / Product Design
** Duration in this Job : 1Yr 7months

Technical Skills :
Programming Language : C, Embedded C,
Hardware Platform : Microcontroller pic , ARM.

Keyskills :
** Digital circuit design with experience in 32-bit microprocessor design, memories, communicatio etc
** Knowledge on high speed digital design techniques
** Analog Curcuit Design & analysis, Analog low level signal processing Good testing / debugging skills
** Knowledge on DC / DC convertor design Electronics components design engineer,
** Orcad analog circuit design
** Microcontroller design, hardware design engineer
** Embedded systems engineer

Qualification Summary :
** Proficiency in Schematic generation & PCB design using standard software Packages like Cadence (OrCad 16.5)
o Proficient in SMD Component Pad generation & integration
o worked on Multilayer(Two Layer & more)PCB design PCB Design for EMI/EMC compliance
o BOM preparation, board bring-up and testing of PCB Developing
** Experienced in the feasibility study, design, inspection, and testing of commercial photovoltaic energy systems.
** Strong hands-on experience with electromechanical prototype product design, development, and manufacturing.
** Conversant in NEC low and medium voltage standards for photovoltaic and renewable energy systems.
** Experienced in the engineering research and computational modeling of solar thermal, photovoltaic systems.
** Experienced with, and customer service, client representation, project management team-based

Professional Engineering Experience :
** Improved functionality and safety of the small PV demonstration system within limited budget resources.
** Project Handled : 10kW (Rooftops), 6kW (ground mount) solar power plants, Solar Street light (80W) Design, Simulation, Execution of the project involving Erection and commissioning, Hands on experience of solar power plants ( 10kWp, 30kWp (Roof tops), solar street light, water pumps).
** Coordination with Consultants and vendors for Material Quotations, BOM, Indents, Orders and reception of material at site.
** Planning, Site survey and analysis, reviewing and reporting of the project status to the management.
** Planning and coordination of various contractors & engineers - civil, mechanical, electrical, instrumentation, etc.
** Understanding of different solar power PV technologies like crystalline, Thin Film and batteries their component specification and cost.
** Suggesting possible improvements that are technically and economically feasible for all future projects of the company.
** Basic understanding of LT/ HT, Transformers, inverters, Circuit breakers, relays, 33KV/11kV substation & drawing of SLD of various solar power systems.

Additional Employment Experience :
Hard ware Design with microcontroller
** Support to develop the PWM and MPPT Solar charge controller,
** Testing the developed the product
** Product designing by using coral draw
** Testing the signal isolators
** Worked part-time assisting college level students to learn and improve their academic skills in the areas of physics, engineering, mathematics.

Additional Skills, Qualifications :
** Eagle (1 years)
** PROTEUS Circuit Simulation Software (1 year)
** MS Excel 2000-2007 (7 years)
** MS Outlook (2 years)
** MS PowerPoint (5 years)
** MS Windows 98, 2000, and XP
** MS Word 2000-2007 (5 years)

Personal Details :
Full Name : SD.IMROZE
Father’s Name : SD HYED BASHA
Date of birth : 12th April 1989
Nationality : Indian
E-Mail : sdimroze AT gmail.com
Languages Known : English, Hindi, Tamil & Telugu
Marital Status : Single

Declaration :
I here by declare that the information furnished above is true to the best of my knowledge.
Date : 04-06-2013
Place : Bangalore
(SD IMROZE)

[Unregistered]

CURRICULUM VITAE :
R.SRITHAR
Email : srithar187 AT gmail.com

CAREER OBJECTIVE :
A position in a result oriented company that seeks an ambitious and career conscious person to design, develop and Testing of Embedded software and Hardware.

SOFTWARE PROFICIENCY :
Languages : C, Embedded C, Assembly.
Operating System : Windows XP, Win 7

EXPERIENCE (3 years & 0 months)
(Working Experience)
Previously I Worked as Embedded Developing & Embedded Hardware Engineer in “ARUL TECHNOLOGIES – CHENNAI, INDIA”. ( 2 year Experience)
I Worked in “ INFOTOP CO., LTD., LINYI CITY, CHINA” as Embedded Developing & Embedded Hardware Engineer ( 1 year Experience)
I Training & Experience in Audio video & CD Technology in “ RAJA INSTITUTE – CUDDALORE ( Part Time 1 years)

Position Description :
Job Post : Developer Engineer.
Professional Summary :
Experience in & Keil uV4.0, Compiler, Debugger, IDE tools & Device Driver.
Experience in STM32-32 Bit ARM Cortex-M3 Microcontroller Schematic Designing & PCB Board Designing & Testing.
Experience and knowledge of various interfacing standards like RS-232, I2C, SPI, and UART Protocol for interfacing our application products.
Experience in designing, developing, and testing circuits and software for 89C51 series & STM32-32 Bit ARM Cortex-M3 Microcontroller.
Experience in Bluetooth, NFC Controller PN532 programming, Interfacing & NFC Stack Communication, like Card Emulation.

Embedded System Software Design Experience :
Experienced in Embedded C & Keil uV4.0 and MATLAB programming.
Experience in Embedded development tools (Emulators, Analyzers, Oscilloscopes, etc.).
Experience with STM32-32 Bit ARM Cortex-M3 Microcontroller programming & Interfacing.
Experience with Interfacing 8 bit & 16/32 bit Microcontroller & Arduino programming.

Embedded System Hardware Design Experience :
Experience with Schematic Designing & Altium PCB Designing for Multilayer PCB Board Designing.
Experience in ARM /DSP Board Design, Analog Digital Circuits, DMA.
Experience with STM32-32 Bit ARM Cortex-M3 Microcontroller Schematic Designing & PCB Board Designing & Testing.
Experience in Hardware designing protocols like UART, CAN, SPI, I2C
Interfacing with STM32Fxx, Microcontroller with GSM, NFC, LCD Display drivers.
Experience in Power Electronics, DC-DC Converters, Buck & boost Converters, SMPS Power supply Circuits designing & Testing, Developing.

PROFESSIONAL TRAINING :
Embedded system Training & developing
Training in Audio video & CD Technology

EDUCATIONAL QUALIFICATION :
2010 Anand Institute of Higher Technology B.E(Electronics & Communication Engineering) 68%
2007 Annai valankani Polytechnic Dip., (Electronic & Communication Engineering) 89%
2004 Gov., Higher Secondary School – HSC 79%

PROJECTS :
Project 1 :
Field : Embedded system
Title : Automatic Host Server Room monitoring & control system with GSM.
Software used : Keil V4.0, VB
My Role : Embedded Code Developing, Board design & Testing Engineer
Description :
The aim of the project is Automatic Host Server Room monitoring & controls with GSM modem, the server room temperature, and water leakage level, air condition monitor to send data to HOST system. The HOST system store in server room data’s. That same time send the details through the GSM. To adjust Air condition level dipped on the server room temperature level .and control all function server room HOST System modems.

Project 2 :
Field : Embedded system
Title : Automatic Car Parking & Indicator System for Industrial Application.
Software used : Keil V4.0, VB
My Role : Embedded Code developing & Board Design & Testing Engineer.
Description :
The aim of the project is automated to monitoring the car parking & status of the car parking display outside the car parking gate.
In this project has been provided at the entry of the parking space, which opens on the arrival or departure of a car. A display section has been provided, which consists of status signals and a display showing the number of cars present in the parking space at any point of time. After the maximum number or cars have entered the parking space, the gate is automatically disabled for vehicles seeking entry into the parking lot. A logic circuit distinguishes between the cars and persons or two wheelers, so that persons and two wheelers are not included in the count for cars.
The project involves a system including infrared transmitter and receiver in every lane and a LED & LCD display outside the car parking gate. So the person entering parking area can view the LED display and can decide which lane to enter so as to park the car. Parking lots are monitored by human beings. All vehicles enter into the parking and waste time for searching for parking slot. Sometimes it creates blockage. Use of automated system for car parking monitoring will reduce the human efforts. Display unit is installed on entrance of parking lot which will show LEDs for all Parking slot and for all parking lanes. Empty slot is indicated by the respective glowing GREEN LED.

Project 3 :
Field : Embedded system
Title : Health care project for old age people monitoring system via Bluetooth Android device.
Software used : Keil V4.0
My Role : Embedded Code developing & Board Design & Testing Engineer.
Description :
Version 1 :
The aim of the project to develop the health care monitor smart box.in this box consist of all modules like heartbeat ,blood oxi, BP level. This module interface with MCU, this unite communicate to server system .this system store all patients health information .then to provide smart health care NFC card each and every patient. This NFC card patient’s health care ID card & store basic health condition about the patients.
Version 2 :
The aim of the project to develop the smart band. in this band consist of sensors, MCU ,Bluetooth .this band to monitor old age people health condition then send information via Bluetooth to Android device. This band monitors the old age people heartbeat, body temperature level and hit, fall detection. In this information send to android device via Bluetooth. Finally to store the old age people health condition in android device.

Project 4 :
Field : Embedded system
Title : PIC-Based Multi-Channel PWM Signal Generation Method and Application to Inverter
Software used : MPLAB, PCW, Keil V4.0
My Role : Embedded Code developing & Board Design & Testing Engineer.
Description :
The aim of the project is to generate a multi-channel digital PWM signal for a UPS Inverter control.
This Project incorporates features that accommodate microcontroller based inverter control with external circuit /IC & Driver circuits, maximum PWM channels are Identical to the IO pins, and the minimal control board size is easy obtained. It mainly emphasizes the synchronized multiple channels PWM generation method according to load demand and load change of a user this technique applied it to four Inverter switch control.

PERSONAL INFORMATION :
Date of Birth : 24011987
Marital status : Single
Sex : Male
Nationality : Indian
Languages known : English, Tamil

DECLARATION :
I hereby declare that the above-mentioned information is true up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Date :
Place : Chennai
R.SRITHAR