www.larsentoubro.com Larsen & Toubro Ltd Abu Dhabi : AUTOCAD Draughtsman

[muthukalee]

Larsen & Toubro limited Chennai : ACAD draughtsman

Company Name : Larsen & Toubro limited ( larsentoubro.com )
Company Location : Chennai
Designation (of vacancy) : ACAD draughtsman
Company E-mail ID : HRhelponline@powai.ltindia.com
Company Website : www.larsentoubro.com

Job Description, Candidate Profile, Company Profile, Company Address :
We urgently need a draughtsman wellversed in autocad and having valid passport and ready move immediately to Abu Dhabi

About us :
Larsen & Toubro Limited (L&T) is a technology, engineering, construction and manufacturing company. It is one of the largest and most respected companies in India's private sector. ECC – the Engineering Construction and Contracts Division of L&T is India’s largest construction organisation with over 60 years of experience and expertise in the field. ECC figures among the World’s Top Contractors and ranks 35th among top global contractors and 60th among international contractors as per the survey conducted by Engineering News Record magazine, USA (August 2008).

Contact us :
Larsen & Toubro Limited
Mount Poona mallee Road,
Manapakkam,
P.B.No.979,
Chennai – 600 089
Tel : 91-44-22526000/8000
Fax : 91-44-2249 3317

[vlnmurthy]

Dear Sir/Madam,
I am Mr.V.L.N.Murthy having 14+ Years
Experance in Structural steel Detaling in Transmission line
tower,Communication towers & Industrial structures using Auto CAD. At
present I am working as a Sr.CADD Engineer in M/s Satyavani
Projects & Consultancy PVT Ltd, Hyderabad, India and looking after
project cordination.
I am interested to work with your esteemed
Organisation in sutable position.
So I an sending my resume along with this mail.

[Guest]

Dear sir,
I am MAHABOOB BASHA.B from HYDERABAD.
I am a fresher in 2010 batch.
I have an Design and Analysis skills.
I am so interested in the Design field.
Please check out my resume and give me replay.
I waiting for your answer.


Thank you
With Regards,
MAHABOOB BASHA.B.

[Guest]

I WANT GET THIS JOB.

[Guest]

CURRICULUM VITAE
MOHAMED HANEEFA KP
mohedhaneef AT gmail.com

Professional Qualification
Educational Qualification :
- I T I 2 year diploma in Mechanical Motor Vehicle
- Pre-Degree in Commerce under Calicut University
- S.S.L.C under Kerala Education Board
- Draftsman Training
- M E P Training
Computer Knowledge :
- AutoCAD
- Micro station
- 3Ds Max
- V-Ray
- Tally
- Windows
- MSOffice
- Graphic Design
- Internet skill
Resume Details
To Whom It May Concern :
I am interested in a position for AUTOCAD DRAFTSMAN. Please review my current resume, education and employment references, outlining my professional experience in CIVIL/ARCHITECTURAL Design Drafting in both the public and private sectors. I have additional work experience providing fieldwork for the purpose of creating construction [MECHANICAL] drawings.
I am self-motivated, perceptive and result oriented. I have strong analytical and problem solving skills along with being very detailed and organized. I have advanced computer skills in the following programs : AutoCAD 2004-2010, Micro station, Solid Works, Microsoft Office, 3DS Max, and Adobe Photo Shop.
Professional Experience
- Worked as a cad draftsman in M/s : Babu Associate’s engineering constructions, Tirur from August 2007 to 2011 January.
- Worked as a AUTOCAD &MICROSTATION part time faculty in CADD CENTRE,Tirur from January 2008 onwards.
- Worked as an Office assistance in Shipping Company Dubai, from 02/08/2004 to 12/07/2005
- Worked as a Designer cum CNC Milling and lathe machine operator in MK Auto Component Company in Ambathoor, Chennai. From September -2005 to December -2006
Personal skills
- Capable of performing and maintaining positive and productive working in internal, external and independent and team environments.
- Strong work ethics lacing ownership of duties and responsibilities.
- Good communications and interpersonal skills.
- Well organized and methodical work management.
- Regular introspection
Other Knowledge :
- M EP Drawings
- CNC Lathe & Milling
- Mechanical Designing in solid works
Extra Curricular Activities :
Interests/Hobbies : Updating my Knowledge especially in Designing software’s.
Driving, Reading, Playing chess, Listening Music

[Guest]

RESUME
MANJEET PAWAR
E-mail-manjeetpanwar728 AT gmail.com
CAREER OBJECTIVE :-

To achieve company’s goal & enhance my and my experience for assisting my career as well as company’s development with latest technologies and new challenges that provide sample opportunities for growth.
JOB PROFILE :-
Working as a Cad Draftsman in (Dimension India Network Pvt. Ltd.) in Noida.
WORK EXPERIENCE :-
1 year experience of Building Structure in company (RI Infrastructure & Services in Delhi)
1 year and six month experience of Cad Draftsman in company (Dimension India Network Pvt. Ltd. in Noida.)
ARCHITECTURAL DRAWING PROJECT :-
The project is mainly in Digitization of all features of Architectural & Mechanical Based Drawings.
Software : Auto CAD 2006
Duration : Persuading
CONTOUR MAP PROJECT :-
This project was mainly involved in Digitization of contour, River, Draining, Road, Fance line Spot Height, Telecommunication connectivity, Elevation features and Railway line etc.
Software : Auto CAD 2000i
Role : CAD Executive
LINE DRAWING PROJECT (ELECTRICAL DRAWINGS) :-
This project includes drafting of electrical drawing with the help of AUTO CAD 2004.
The client in the form tiffs provide the raw data. We have digitized the drawing as per client specifications.
Software : Auto CAD 2004
Role : CAD Executive
COMPUTER QUALIFICATION :-
CAD Packages Auto CAD 2004/05/06/07/08/09 & Auto CAD 3D.
Good English Typing.
EDUCATION QUALIFICATION :-
Matriculation passed out from the Board of School Education Haryana (Bhiwani).
12th passed out from the Board of N.I.O.S.
TECHNICAL QUALIFICATION :-
Two years Course of Draftsman Civil in I.T.I. Rohtak.
Complete Auto CAD Course 2D & 3D (Civil) from CAD Center Gurgaon (HR).
One year Course of Computer Software.
STRENGTH :-
Good at Grasping New things.
Self Confidence and Hard working.

[yrs_79@yahoo.com]

not job opportunities through you

[Guest]

Hi sir i am praveen. searching job in auto cad designing

[Guest]

WASIM ASGHER
Mechanical Engineering, Al-Kabir Polytechnic, Jamshedpur, India
E-mail :- wasimAkpme88 AT rediffmail.com
wasimhvac AT yahoo.in
Professional Experience August, 2008 till Present
Current Employee : - VOLTAS Ltd.
Designation : - HVAC Design Supervisor.
Previous employee : - Pinnacle InfoTech Solutions, Durgapur, West Bengal
Designation :- Executive Engineer.
HVAC BIM Modeler (over 3 years 2 months)
- HVAC sheet metal detail, Fabrication drawing, Equipment & Ducting Layout, Process flow diagram of Hotel, Hospital, Industrial building, School building and Casino project for USA and Indian clients by using Revit MEP 2011, TSI, etc.
- Mechanical piping- Fabrication drawing, Equipment & Piping Layout, Process flow diagram, Piping Isometric of Hotel, Hospital project for USA clients by using Revit MEP 2011.
Overseas experience (Duration 2 months)
- 2 months overseas experience in Dubai as a trainer in MEP, with the use of
REVIT MEP 11.
Major Recent Projects

Projects Responsibilities Software
100,000 sf National Building, Virginia, USA Worked on complete 3D sheet metal and mechanical piping modeling. Revit Family creation in 3D of Air Handler Units (AHUs) and other major equipments in the Mechanical Room (MER) were also done. Coordination inside the MER was done making sure adequate equipment clearances are maintained and maintenance personnel have access to equipment and piping valves. Revit MEP 2011
Over 150,000 sf of Federal Project, Virginia, USA Performed 3D BIM coordination with all trades for this challenging project that involved pre-cast walls and slabs along with multiple Mechanical Rooms. Did quantity take-off and equipment pad layout drawings, wall penetration drawings, etc. TSI
Delhi Indira Gandhi International Airport, New Delhi, INDIA Worked as a part of the team on detailed 3D sheet metal modeling and coordination with other trades involved. Revit MEP 2011
BSU TBA Locker Room Project- 50,000 gsf, Boise, Idaho, USA Performed design validation by coming up with suggestions for alternate duct and mechanical piping routing in highly congested areas like corridor. Revit MEP 2011
Software Skills Summary
Technically skilled in the following software :
- Revit MEP 2011
- AutoCAD 2009
- AutoCAD MEP 2009/2010
- TSI (Duct & Pipe)
- CadPipe HVAC (8.2, 9.0)
- CadPipe Industrial 9.0
- NavisWorks Manage 2009/2010/2011
- MS office
Strengths
- Strong determination.
- Punctual and hard working.
- Lead the Team.
My Responsibilities
- Study Tender documents for understanding the scope of work. Identify the scope of work and highlight the areas requiring special attention to various superiors.
- Handling the Overall Project, Co-ordination & Quality checking.
- Problem sorting & guiding the whole team.
- Maintaining project standards throughout the whole project.
- Preparation of 3D installation drawing & generate material list.
- Preparation of Isometric Drawing & generate Take-off sheet.
- Preparation of HVAC & Mechanical Piping & Electrical Layouts.
- Preparation of General Arrangement, Shop drawing of HVAC & Mechanical Piping.
- Coordination with other trades.
- Client communication.
- ISO Documentation.
- Job Presentation for marketing.

[Guest]

Civil engineer & autocad operator.
6 month site super visour experience & 1 year autocad design work experience.
sonucivilengineer AT ymail.com

[Guest]

Resume
SHIV LAL JANGID
E-mail :- Shiv.jangid6 AT gmail.com
Objective : Professional goals include continuing to grow in leadership and knowledge. Willing to work in challenging environment so that I would explore myself and realize my potential.
Education :
- B.A. (Sociology, Political Science & Hindi literature.) from M.D.S. University, Ajmer, Rajasthan in the year 2009.
- Senior Secondary (Sociology, Political Science & Gujarati literature.) from Board of Secondary Education, Ajmer Rajasthan in year 2006.
- Secondary from Board of Secondary Education, Ajmer Rajasthan in year 2004
Professional Certificate
- Diploma in Architectural CADD : CADD (Computer AutoCAD Designing Drafting) from CADD CENTER Training Services, in RAJKOT (GUJ.)
- M.C.P. (Microsoft Certified professional) for maintenance of computer systems. Certificate from Valencia in U.S.A.
- CIT : CIT ( Certificate course in information technology) from Rajasthan Knowledge Corporation Limited in Barmer (RAJ)
Operating System :-
- Windows 98, 2000, XP, Vista, Lunax
- LAN networking, software installation and maintenance.
- Printing and scanning
- M.S. Office, M.S. Visual Basic
- Data Entry and Drafting in Hindi and English.
- Internet Explorer
- Interior designing
- Creating 3Ds Perspective Designing
- Auto cad
Other Handling work :-
- Commercial Site Management with supervizering work.
- Work Material Details and Distributes in Market.
Work Experience
- Accounts and Office Management in Sant Shree Garvaji Maharaj Seva Trust, NH 15, Tilak nager Barmer, Rajasthan
- Office Management for office of District Rural Development in Collectret Barmer (Raj).
- As a Supervisor Monitoring and System Management (M.I.S. Manager) in NIIT technologies (team computers) in Jaipur.
- Office, Site Management and System Operators of Architectural CADD in S.K. Kulariya Interior designer Rajkot.

[Guest]

Curriculum Vitae
Abhichandani Sushil Prakash
sushil.abhichandani AT yahoo.com

CAREER OBJECTIVE :
“Intend to become a successful professional and work with dedicated people to realize my potential and explore myself.”

ACADAMIC RECORD :
Course Institute University/Board Year Percentage
B.E. Electrical Aggregate Parul Institute of Engineering Gujarat 2007-2011 68.55
B.E. Elec. Sem VIII --II-- --II-- 2011 71.06
B.E. Elec. Sem VII --II-- --II-- 2010 73.86
B.E. Elec. Sem VI --II-- --II-- 2010 73.29
B.E. Elec. Sem V --II-- --II-- 2009 72.33
B.E. Elec. Sem IV --II-- --II-- 2009 65.46
B.E. Elec. Sem III --II-- --II-- 2008 66.13
B.E. Elec. Ist Year --II-- --II-- 2008 62
H.S.C Vidyut Board Vidyalaya Gujarat Board 2007 64.4
S.S.C --II-- --II-- 2005 76.86
B.E. Aggregate : 68.55 %
ADDITIONAL INFORMATION :
Date of Birth : 5th December 1989
Gender : Male
Languages known : English, Hindi, Sindhi and Gujarati
Hobbies : Writing articles

ACADAMIC PRESENTATION :
1. Extra Curricular activities :
- Participation in the event of the “ENERGIZE” in TECHFEST’11 at IIT Bombay.
- Published paper titled “ENERGY AT THE COST OF ENVIRONMENT - WHERE TO DRAW A LINE” at National Conference on INTEGRATED ENERGY POLICY organized by GETCO.
- Involved in organization of technical event in “PROJECTION’10” as student coordinator at Parul Institute of Engineering.

2. Project Under Taken :
- “UTILIZATION OF NOISE FOR PRODUCING ELECTRICITY”- to prepare a hardware model that produce electricity from noise – final year project.
3. Achievements :
- Project article published in Times of India (Mar 19, 2011, 11.23pm), Divya Bhaskar (Mar 11, 2011) and Sandesh (May 09, 2011).
4. Professional Skills :
- Autocad
- DIALux(lighting design software)
- Tools :
MS-OFFICE (power point, word, excel)
EXPERIENCE IN NEILSOFT PVT. LTD.
1. Got an exposure on software’s like DIALux and AutoCAD being the employee of Neilsoft.
2. Finally have carried out numerous lighting calculations considering different lighting lux level standards, Load Calculations, Equipment sizing, Facility tables and lighting layouts on DIALux.
3. Have also done Quality checks for many projects.
STRENGTHS
- Result oriented with time management skill, depth learning and organizing skills.
- Adaptability to changes, commitment, sincerity and regularity.
I hereby declare that the above particulars furnished by me are true to the best of my knowledge and belief.
Place : VADODARA. SUSHIL PRAKASH ABHICHANDANI

[Guest]

CURRICULUM VITAE
Amit Naskar
E mail : amit.naskar3 AT gmail.com
EDUCATIONAL QUALIFICATION
EXAMINATION INSTITUTION BOARD/UNIVERSITY YEAR OF PASSING
Secondary Shibpur S.S.P.S Vidyalaya W.B.B.S.E. 2003
Higher Secondary Thanamakua Model High School W.B.C.H.S.E. 2005
TECHNICAL QUALIFICATION
INSTITUTION CATEGORY YEAR OF PASSING MAX. MARKS MARKS OBTAINED
I.T.I. Howrah Homes Electrical 2007 700
478
The George Telegraph Training Institute, Sealdah (Kolkata)
Civil Draughtsman
COMPUTER PROFICIENCY
FUNDAMENTALS OF COMPUTER
WINDOWS XP
MS OFFICE -2003, 2007
AUTOCAD -14, 2000, 2004, 2006, 2007, 2009,
WORK EXPERIENCE
- Present Company
Premco Rail Engineers Limited
Axis multi complex, CF-9, 3rd Floor,
Rajarhat New Town, Kolkata-700 156.
Duration
May 2011 to Till Date
Designation
AutoCAD Draftsman
Job Responsibilities
- Preparation of Railway General Alignment Drawing, Longitudinal Section, Cross Section Plan.
- Conceptual Signaling Plan, Signal Interlocking Plan, Panel Face Diagram.
- Preparation of Detail Railway Signaling Drawing, (Front Plate Diagram, Track Bonding Plan, Cable Corrage Plan, Circuit Diagram, Cable Route Plan etc.) for various stations of south Eastern Railway, South East Central Railway.
- Clients : Tata Sponge Iron Ltd (MMVR), Jupiter Cement Industries (Mahalimarup), MSPL (Noamundi), Earth Minerals Co Ltd, Jindal Steel & Power Ltd (Raigarh), Durgapur Metaliks Limited, Rosa power Supply Company Ltd, Sesa Goa (Barbil) etc.
- Conceptual Building drawing & Railway R.C.C. bridge drawing.

- Previous Company
Perfecto Electricals
Trust House (4th Floor)
32A, Chittaranjan Avenue,
Kolkata-700012
Duration
February 2007 to April 2011
Designation
AutoCAD Operator
Job Responsibilities
- Preparation of detail Signaling Drawing (Front Plate Diagram, Track Bonding Plan, Cable Corrage Plan, Relay Rack, C.T. Track, Circuit Diagram, Contact Analysis, Cable Route Plan etc.) for various stations of south Eastern Railway, Eastern Railway, East Central Railway.
Details of Referees :
- Tarun Kumar (Ex GM/EAST-WEST/METRO RLY.) - 09830908666
- S.K.Sinha (Ex GM/IRCON) - 09433200813
- A.K.Biswas (Ex IRSE.) - 09433029292
- K.P.Das (Ex Dy.CSTE/CON/SE. RLY./GRC) - 09433064856
Place : Howrah
Date : 21.02.2012 (Amit Naskar)