Civil, Structural Design Delhi : Shashi Consultancy Services

[deepika]

Keywords: Civil , Structure, Design, Oil, Gas , Power
Designation : GM,Civil /structural Design

Experience: 20 - 25 Years
Location: Delhi/NCR

Education:
UG - B.Tech/B.E. - Civil
PG - Any PG Course - Any Specialization;Post Graduation Not Required

Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D

Posted Date: 31 Jul

Job Description
The development of technical specification; tender level, detailed design & construction drawings of civil structures during construction including assistance to Project during construction on design related issues also form part of the job respons.

Desired Candidate Profile
Engineering Graduate (Civil) with 20-25 years working exp. in engineering & design works of Power Projects in various stages of project development & designing

Company Profile
A well known EPC company

Company Name:
Client of Shashi Consultancy Services
http:// www.shashiconsultancy.com

Executive Name:
pankaj Jha

Address:
Shashi Consultancy Services
198/20, First Floor
Ramesh Market
East Of Kailash
New Delhi,Delhi,INDIA 110065

Email Address:
cv@shashiconsultancy.com

Telephone:
91-011-41326179,9810503934,9810501957

[Guest-IJT]

V.S.PRINCE
Pipe Stress Engineer
OBJECTIVE:
To absorb all qualities of good professional with my technical thoughts contribute towards organization.

PROFESSIONAL PROFILE:Six (6 ½) years experience in the Piping Design and Pipe stress analysis for EPC companies.CLIENT EXPERIENCE: M/s Waha Oil Company (Libiya)M/s Petroleum Development of Oman (Oman) M/s Kuwait Oil Company (Kuwait)

CURRENT AND PREVIOUS EMPLOYMENT:
- Worley Parson Engineering L.L.C., Oman 2008 - 2009
- Heavy Engineering Industries and Shipbuilding Company, Kuwait 2005 - 2008- Millicon Consultant India pvt. Limited, India 2005 - 2005
- Camy Engineering Limited, India 2002 – 2004

EXPERIENCE SUMMARY:
- Stress analysis Static & Dynamic (Slug flow) using CAESAR-II version 5.0 & 5.1
- Identifying the Stress critical lines from the P&ID and line list as per the Stress Specification.
- Preparing the Stress Critical Line list.
- Preparing the Nozzle Loads calculations.
- Preparing the Flange Leakage calculations.
- Preparing the Pressure Relief valve Reaction force calculations.
- Preparing the Wind Load calculations.
- Preparing the Vibration analysis.
- Preparing the Buried pipe analysis.
- Preparing the Stress Analysis Design Basis.
- Submitting Stress Analysis Reports to the Client and getting their approval.
- Preparation of Support Load Data and passing the same to Civil.
- Pipe support calculations.
- Co-ordination with the other Engineering Departments.

CAREER HISTORY:
1. Piping Engineer, June 2008 to 2009 AT Worley Parsons Engineering L.L.C., OmanList of Projects Involved
(i) Currently working on the Faregh field development phase-II gas processing facilities for WAHA OIL COMPANY, Libiya.
Responsibilities Include:
- Stress analysis performed for Reciprocating Compressor suction lines for 6" and Discharge lines for 4" in accordance with the requirements of ASME B31.3 and Allowable nozzle load as per Equipment Manufacturer Allowable loads.
- Stress analysis performed for Centrifugal Compressor suction lines for 14" and Discharge lines for 8" in accordance with the requirements of ASME B31.3 and Allowable nozzle load as per API 617 and Equipment Manufacturer Allowable loads.
- Stress analysis performed for Air cooler Heat Exchanger suction lines for 10" and 6" in accordance with the requirements of ASME B31.3 and Allowable nozzle load as per NEMA SM 23 and API 661 and Equipment Manufacturer Allowable loads.
- Stress analysis performed for 8" Buried Pipe Line at 140Km length for gas piping in accordance with the requirements of ASME B31.8 and found the Anchor block force.
- Pressure Relief valve reaction force calculation and 24", 20" and 12" Flare line analysis as per ASME B 31.3.
- Stress analysis performed for Hot production Well head Pipe for 4" with Ball joint Scissor arrangement in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 4" to 24" Lines at 10m height pipe rack for gas and oil process piping in accordance with the requirements of ASME B31.3.
- Static Equipment Allowable Nozzle load analysis as per Pressure vessels.
- Vibration Effect analysis.
- Dynamic analysis (Slug flow analysis) performed for 6" Line in accordance with the requirements of ASME B31.3.

2. Piping Design Engineer, August 2005 to May 2008 AT Karafi National - Heavy Engineering Industries & Shipping Company, Kuwait.
List of Projects Involved
(i) GC-27, New desalter and light crude drain modifications and GC-27 capacity expansion for effluent water separation,
transfer and minagish injection plant upgrade. Kuwait. Client: Kuwait Oil Company, Kuwait. Consultant: SNC-Lavalin, UK
Responsibilities Include :
- Stress analysis performed for 48
- Flare Line Piping in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 20
- Oily water Transfer pump Suction and Discharge Line Piping in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 24
- Line of Effluent water system with Buried GRE Piping in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 16” and 18” Lines of Oily water system with Buried GRE Piping in accordance with the requirements of ASME B31.3
- Ascertain stresses of GRE piping system are within the allowable per B31.3.
- Determine the restraint loadings at pipe supports and tie-in point.
(ii) Modification of Tank Vapor system, crude tank filling pipe works & Reconstruction of Tanks at Gathering Centers 2, 3, 9, 11 and Modification of Boot Risers at 14 GC's, (South & East Kuwait)Client: Kuwait Oil Company, Kuwait Consultant: AMEC plc, London, U.K.
Responsibilities Include :
- Stress analysis performed for 6",8",10" Lines at 15m height for Boot riser modifications for Wet crude oil tank and Dual crude (wet and dry) oil tanks in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 16",20",30" and 36" Lines of Crude oil inlet, Crude oil outlet piping for Dual and Dry crude oil tanks in accordance with the requirements of ASME B31.3
- Stress analysis performed for 36" Flare line for Dual crude oil tank and Dry crude oil tanks in accordance with the requirements of ASME B31.3.
- Review location of piping supports as per stress calculation and recommend possible location to accommodate other piping layout attaining minimal pipe spacing especially on pipe-rack.
- Review IFC drawings to ensure that correct information is transmitted.
(iii) Heaters & Boilers safety up gradation and Emission control project, Kuwait National Petroleum Corporation - Shuaiba Refinery, Kuwait.Client : Kuwait National Petroleum Corporation, Kuwait.Contractor: Engineers India Ltd., India & HEISCO.
Responsibilities Include :
- Stress analysis performed for 6" turbine exhaust line and 4" turbine inlet line in accordance with the requirements of ASME B31.3 with Equipment Manufacturer Allowable Nozzle loads.
(iv) Heavy fuel oil pipe line from Mina Al-Ahamadi Refinery to Doha west power station, Kuwait. (120 km)Client: Ministry of Energy-Electricity and Water, Government of state of Kuwait, Kuwait.Consultant: Kuwait Oil Company, Kuwait. Responsibilities Include :
- Preparation of Wall thickness calculations for 20
pipelines as per B31.4.
- Stress analysis performed for 20",10" and 8" Lines of on-plot piping (MAA Refinery, TL3-Cross over, Doha west power station) in accordance with the requirements of ASME B31.3 and B31.4.

2. Piping Engineer, January 2005 to July 2005 AT Millicon Consultant Pvt. Ltd, India
(i) Modification of pipe works, Clariant Chemical Ltd., INDIA
Responsibilities Include :
- Develop and check system design drawings in conformance with project specifications, design parameters, codes and industry practices.
- Review project specification, design instruction, plot plan, flow diagrams, line list and supplier's information.
- Performed piping layout drawings and isometrics. Check, back-check and correct plan drawings and isometrics. Update master flow diagrams and equipment location plan. Support construction in drawing and specification interpretations and design modifications.
- Preparation of the pipe thickness calculation.

3. Asst. Mechanical Engineer, January 2002 to November 2004 AT Camy Engineering Pvt. Ltd, India.
- Checking the piping drawings and specifications in conformance with codes, design parameters and industry practices.

ACADEMIC QUALIFICATION: BE in Mechanical Engineering C.S.I. Institute of Technology Tamilnadu, India.
Diploma in Mechanical Engineering Morning Star polytechnic Tamilnadu, India.
Piping Engineering, Indian Institute of Technology Mumbai, India.

COMPUTER SKILLS: Expert User of Caesar II software both Static and Dynamic (Slug flow analysis)
- Good Knowledge of Microsoft Excel

[Guest]

CURRICULAM VITAE
ROHIT TOMAR


Objective
Looking for colloq in your esteemed organization where I can develop my skills under a professional hand, and to be a positive influence that stays forever in the minds of the people around me.
Specialized Work Field
Responsible For Preparation of structural drawing (R.C.C.) for Residential
and commercial Building project etc.

Responsible For Preparation of architecture drawing, electrical drawing for Residential and commercial Building project etc.

Key Qualification

Extensive Experience in preparation of working Civil Structural.
Professional Qualification
10 from Haryana Board School Education Bhiwani in march 2002.
10+2 vocational in L/M from Haryana Board School Education In may 2004 .
Technical Qualification
2 year diploma in draughtsman civil from technical board of Haryana In July 2006.
3 year diploma in civil engineering from govt. polytechnic nillokheri In june 2008.
Current Qualification
B.Tech. in civil Engineering from J.R.N.Rajasthan vidyapeeth University UDIPUR

Extracurricular Activities

Activity Participates actively in various college events
Sports Badminton ,Cricket ,
Hobbies Listening soft Music, & Long Drive
Computer Skills
Proficiency in autocad -2000,2002 &2004, MS Word, MS Excel.
Organizational Experience : 2 .7 Years
Company : (project)
(1) S.P.R. Buildtech Ltd.
Group housing society(july2008 to feb 2010)
Sec. 82 faridabad as a civil engg.
(2) pasupati C.G.H.S. Ltd.
Sec 48 faridabaSd as a project engg.
(mar 2010 to mar 2011)
(3) R.p.s. infrastructure ltd.
Mar 2011 to ………
Designation : civil engineer.