Drill Rig Operator, Pipe welder : SAUDI ARABIA

[HAITHAM]

Location : SAUDI ARABIA.
Job Type: drill rig operator to work on driltech d40k drill rig.
Conditions: diesel engine and hydraulic mechanic .(CAT 3408 ENGINE , SULLAIR AIR COMPRESSOR)
Salary: 1000 SR.
Commission : 2 SR on each drilled meter. AND 300 SR every 3 month. AND free food.
Salary+COMMISSION: 1720 SR at least If he drill 360 meter.
Contact : a4t2@hotmail.com d40k
http://www.machinerytrader.com/image...e/79069631.jpg

I will need tow man to work on a drill rig and both will help each other . ( a mechanic and welder)
I will need 10 candidates if that possible.

1st: heavy duty Disel Engine And hydraulic system mechanic.

Free position : 1

job description :
drill rig operator, and repair and rebuild all the drill rig mechanic and hydraulic part, and help other worker if they need help

Requirements:
1- he must have a certified work experience in heave duty disel engine and hydraulic mechanical. (400 hp or more "caterpillar 3408 ,3406") and(400 hp or more sullair two stage air compressor)
2- he must be 25 years old at least.
3- have a driver license and can drive .
4- MUSLIM.
5- pass the heavy duty mechanic and hydraulic ability test.
6- have a knowledge in the drilling rig operating.
7- accept the mobile work. the drill will be moving in all SAUDI ARABIA cities.
8- accept work on the drill rig as operator and help the other worker if they need help.

Salary: 1000 SAR every month (1$=3.75 SAR)

Commission :
1- 2 SAR on each drilled meter.
2- 300 SR every 3 month, IF he take a good care in the equipment, and no damage happpen.
3-Free food in the work time.
4-Free Housing.

----------

2ND : Heavy Duty and Casing Pipe WELDER.
Free position : 1

job description :
drill rig operator assistance, and welding the well casing pipe , this pipe is like petroleum pipe .and help other worker if they need help

Requirements:
1- he must have a certified work experience in heave duty and Casing pipe Welding. ( petroleum pipe )
2- he must be 25 years old at least.
3- have a driver license and can drive .
4- MUSLIM.
5- pass the heavy duty and pipe Welding ability test.
6- have a knowledge in the drilling rig operating.
7- accept the mobile work. the drill will be moving in all SAUDI ARABIA cities.
8- accept work on the drill rig as operator and help the other worker if they need help.

Commission :
1- 2 SAR on each drilled meter.
2- 300 SR every 3 month, IF he take a good care in the equipment, and no damage happpen.
3-Free food in the work time.
4-Free Housing.

-----------
The visa will be provide by me and it's ready as gift
Air ticket he need to provide it
Your service charges is on the candidate
I am waiting for the candidates CV .

a4t2@hotmail.com

[Guest]

Iam jayaraj my job pipe welder

[Guest]

ASIM ABDULRAHMAN AL MUBARAK
FIELD ENGINEER
(B.sc degree in Petroleum Engineer Houners)
C.V

PERSONAL INFORMATION :
Date and place of birth : AL ZAWIA LIBYA 18/11/1974
GENDER : MAIL
MARITAL STATUS : SINGLE
E MAIL : asimnaft AT hotmail.com
Mobile : 0912896707
EDUCATION :
1995-2000 SUDAN UNIVERSITY OF SCINCE AND TECHNOLOGY.
B.SC. PETROLEUM ENGINEER , CLASS OF AWARD IS 3D (HONORS).
2001 – 2002 TEACHER OF SCINCE (NATIONAL MANDATORY SERVICES).
2002 – 2003 INTERNATIONAL UNIVERSITY OF AFRICA,DIPLOMA IN PROFICIENCY TRANSLATION ( ARABIC – ENGLISH ).
1981 – 1993 ELEMENTARY , PREPARATORY AND
SECONDARY EDUCATION .
( HIGH SCHOOL CERTIFICATE SULTANATE OF OMAN – SUR ).
TOTAL PERCENTAGE IS 86.43%.
Collage practices :
Technical training for basic skills in construction, carpentry, welding, electrical, circuits and melding in the University of Sudan 1996.
Oilfield short training with artesian water
Drilling company came in my area in 2001.
Petroleum engineering special courses & training lab, reservoir laboratory, drilling operation presentation, logging, geologic lab and other training courses.

LANGUAGES :
Arabic : my mother tongue, fluent read, writes and speak.
English : Second languages, read, write and speak.
I possess a certificate of proficiency in translation from
international university of Africa (Khartoum – Sudan) with
the very good grade through an intensive six month course.
SKILLS & TRAINING :

HSE SAFETY INDUCTION :
- I have been completed the QHSE & H2S safety course in Muscat for THE PDO OMANI PROJECT MOTHER COMPANY IN 5-5-2007.
- M-ISAWCO QHSE PROGRAME COURSES AND HSE IN OILFIELD TASKS FROM 2006 UP TO NOW 2009.
- SWAMP RIG SAFETY PROGRAME WITH WHITE NILE PETROLEUM CO(WNPOC) IN SOUTH OF SUDAN.
- JEBEL ALI (OILFIELD SUPPLY CENTER LIMITED) QHSE SAFETY COURSES IN DUBAI IN 6-6-2007.
- COMPLET THE M-ISWACO TRAINING CENTER QHSE & HSE SAFETY COURSES IN BANKOK 2008.
I am familiar with PC operation system (windows) all version and I am also good at Ms word, power point,writing,outlook,internet explore and many other soft ware’s.
Business Administration in 2006 over six month I have been worked as petroleum engineer for TEBNO Co ltd . Building towers camps in oilfields, Marketing ,sale and purchasing and how dealing with other companies and institutions. Selling drilling rigs and surface rigs.
I am a good programmer at using “MATH CAD “professional “software”.
I am very good at sketching, drawing painting, samples designing and advertising by hand or other.
AWARDS RECEIVED :
I obtained the very good grade on diploma from the International
University of Africa in Arabic – English translation.
WORK EXPERIENCE :
Between 2005 – 2006 I have been completed the task of drilling at
the rig site in ( FALOG )OILFIELD NORTH UPER NILE STATE. I have practiced and observed the complete and successful operations for number of wells. I have also practiced and observed the drilling operations at another site in ( BALEELA) OILFIELD SOUTH OF KORDOFAN worked as DRILLING ENGINEER for the“ AL DINDIR INTERNATIONAL
PETROLEUM COMPANY” FOR THE PETRODAR
PETROLEU CO ( PDOC )PROJECT IN ADAR & FALOG OILFIELD.
The total of hours of drilling operation at both sites at (Falog and Baleela)
were approximately (1000)hr calculated by the multiplying the number of
daily shift hours by the total number of working days at the rig site
(70days x 12hr ).
At the beginning of the drilling operation we have finished studying the detailed (Action plan) of work witch included :
1. Safety measures
2. The rigging up
3. Conductor hole
4. Surface hole
5. Bit record
6. Cementing operation
7. Conclusion and recommendation
8. Production hole
9. Other operation

I have benefited a lot from the practical solutions for the Drilling problems at the rig site such as : mud losses , stuck pipe and how to manage and control the BOP to avoid the hazards resulting from the high pressure of the gas flow.
I have also attended and practiced the managing of mud curriculum. I have also had a practical experience in adding the chemical materials of drilling mud under the supervision of M-I Engineer.
Worked as sales engineer in construction Co like building towers,
hotels and oversees business administration.
Worked as Petroleum Engineer (petroleum administration) for
“TEBNO CO ltd “ during seven months.
MY HIGH EXPERIENCE IN OILFIELD WITH
“ M-I SWACO drilling fluids uk ltd co.” Up to now :
During this period I am work for the M-I SWACO drilling fluids UK co as DRILLNG FLUIDS & SOLID CONTROL+ EPS INTERNATIONAL ENGINEER UP TO THREE YEARS :
ONE YEAR WORK AS “ MUD ENGINEER “ IN HEGLIG OILFIELD FOR GRATER NILE PETROLEUM Co (GNPOC) PROJECT COMPLETED NUMBER OF WELLS PRACTICED AND OBSERVED DRILLING FLUIDS OPERATIONS AND THE OTHER IMPORTANT ANALYSIS IN THE MUD SYSTEM.
AFTER A YEAR I HAVE BEEN RESIVED SCHOOL TRAINING COURSE FOR SWACO OPERATION PROJECT OF PETRONAS PETROLEUM COMPANY &WIGHT NILE PETROLEUM COMPANY (WNPOC) IN SOUTH OF SUDAN BLOCK (5B) WORK AS E.P.S ENGINEER IN SOUTH OF SUDAN THAR JATH OILFIELD SWAMP BARGE RIG .
DURING THIS PERIOD I HAVE BEEN COMPLETED THE EXPLORATION JOB WITH THE MOTHER COMPANY ( WNPOC ) WORKED AS SOLID CONTROL ENGINEER AND ES ENGINEER FOR THE M-ISWACO FROM 2007 TO 2008.
I HAVE BEEN RESIVED NUMBER OF HIGH CERTIFICATE COURS FROM ”M-I SWACO uk co” TO PROSPECT A VERY GOOD EXPERIENCE IN OILFIELD AROUND THE WORLD.
THE HIGH COURSES THAT I HAVE BEEN COMPLETED WITH M-I SWACO SCHOOL PROGRAME ARE :
MUD ANALYSIS COURSE , MUD LAB COURSE &
OILFIELD MUD SYSTEM IN DRILLING OPERATION
COURSE OVER AYEAR COMPLETED NUMBER OF
WELLS.
TASK BASED ASSESSMENT CLEANCUT
OPERATION & MAINTENANCE IN BANKOK
TRAINING CENTER :
1- CCB Operation.
2- CCB Maintenance.
3- R-Valve Operation.
4- R-Valve Maintenance.
5- Pressure Regulator Unit (PRU)
Operation & Maintenance.
6- ISO-PUMP Operation.
7- ISO-PUMP Maintenance.
SOLID CONTROL TRAINING COURS IN (OMAN, DUBAI & BANKHOK) IN M-ISWACO uk co .TRAINING CENTER IN BANKHOK :
1- CENTERFUGE OPERATION &
MAINTENANCE.
2- SHALSHAKERS OPERATION &
MAINTENANCE.
3- CRI OPERATIONS
4- D-GASER OPERATION
5- D-SELTER OPERATION
6- OUGERS SYSTEM
7- VER –TG SYSTEM

[Guest]

Dear sir
Adesh kumar
I apply autometic welder
Exp-5year
Sir your have job gmaw autometic 5G welder please email(kumar.adesh539 AT gmail.com)
I am indin
Thank you

[Guest]

APPLICATION FOR THE POST OF WELDER CUM FABRICATOR IN RIG

[Guest]

I am PRADEEP KUMAR V.G with 15 years experience as welder cum fabricator.

[Guest]

I am welder for the past twenty years. Now I am at work in Kuwait.

[Guest]

I want pipe welder job in Saudi Arabia.