www.ksk.co.in Energy Ventures Ltd Hyderabad Bilaspur : Mechanical Engineer

[muthukalee]

Mechanical (BTG) HO/Site
ksk.co.in

Position title : Mechanical (BTG) HO/Site
Number of Positions : 8, Hyderabad (HO-02), Bilaspur (Site-06)
Location : Hyderabad (HO), Bilaspur (Site)
Qualification : Diploma or BE/B.Tech in Mechanical Engineering with 04 to 15 yrs of relevant experience.

Responsibilities :
• Ensure planning, scheduling, monitoring & timely execution of erection and commissioning of mechanical related work for BTG & BOP equipments
• Proper co-ordination with civil agencies to get civil foundations for erection, sequentially and priority wise
• To evaluate & monitor over all work progress of erection & commissioning of equipment as per the set schedule by planning dept
• Coordination and liaison with authorities during erection

To ensure smooth working, Mutual co-ordination, and co-operation among erection groups and with all concern involved in erection activities

• To be in touch with Planning section so as to get required documents needed for erection and commissioning and to follow up for any details required
• To prepare Review Notes for Monthly co-ordination meetings at H.O. level
• To give feedback to all superiors about site activities and progress details related to erection & commissioning as and when required or as per feedback schedule
• Responsible for handling the stores and update the inward materials and to highlight critical items in advance to ensure sequential erection

To make aware all those involved in erection regarding Safety and precautions to be taken during course of erection

About us :
KSK Energy Ventures Limited (KSKEVL), a BSE& NSE listed Indian subsidiary of KSK Power Ventur plc, is a power project development company in India, with experience in developing and operating multiple power plants across India. We operate in the power generation business and are well positioned with long-term fuel access to our various power plants. The Company was established in 2001 to capitalize on the emerging opportunities in the Indian power sector and focus on developing, operating and maintaining power projects.

Contact us :
KSK Energy Ventures Limited
8-2-293/82/A/431/A
Road No :22, Jubilee Hills
Hyderabad 500033, INDIA.
Phone : +91 40 23559922/23/ 24/ 25
Fax : +91 40 23559930
careers@ksk.co.in
http://www.ksk.co.in

[Guest]

RESUME
SUNIL BHOSLE e-mail : sunilbhosle14 AT gmail.com
sunilbhosle14 AT yahoo.com

Career objective :
Having the proficiency of working on the technical skill and to attend the maximum
output putting the best of my potential.

Educational Profile :
- B.E.(MECHANICAL) from CHHATTISGARH INSTITUTE OF TECHNOLOGY ,RAJNANDGAON with 72% marks which is affiliated to Pt. Ravi Shankar Shukla University, RAIPUR.
- Secured 12th board from Beacon Eng. Hr. Sec. School, Darri, Korba with 51% marks.
- Secured 10th board from Kendriya Vidyalaya N.T.P.C., Korba with 55% marks.

Work Experience :
M/S SUNIL HI-TECH ENGINEERS LTD, NAGPUR.
Duration : 2 years and 4 months (APRIL-2008 to AUG-2010).
Project site : 4 x135MW DCPP JSPL, Raigarh, (C.G)
Designation : Engineer
Client : JINDAL STEEL&POWER LTD (JSPL)
Job Profile : Erection & Testing of Boiler
SARTH INDIA LIMITED, NAGPUR.
Duration : SEP-2010 to TILL DATE
Project site : 1x250 MW MSPGCL, PARLI, (M.H)
Designation : PLANNING & BILLING Engineer
Client : BHARAT HEAVY ELECTRICAL LIMITED (BHEL)
Job Profile : Erection & Testing of Boiler
Job Responsibility :
- Erection & Alignment of Structural materials like Ceiling Girders, Columns, Beam, Bracing, Platform and Handrails.
- Erection and Alignment of Pressure Parts Panels, Down comers, Headers, Link Pipes & Tubes.
- Erection & Alignment of Boiler Drum.
- Erection & alignment of Power Cycle Piping.
- Capable to discussion with clients
- Involved in Documentation and Maintaining Progress report of Job.
- Planning for erection & material feeding
- Monitoring work progress and Quality of work.
- Organization of site activities and Client dealing.

Achievements :
- Done vocational training for 15 days in Boiler section, M.G.R. and C.H.P. in N.T.P.C., Jamnipali, Korba
- Participated in cricket tournament at regional level.
- Sports captain of my college and also the active member of co-curricular activities.
- Organized the event UTSAV for Mechanical Department of my college.

[Guest]

CURRICULUM VITAE
VIMLESH KUMAR KAMLESH
Email : - vimleshkamlesh AT gmail.com
Career Objective :-
Seeking a challenging position as Network Engineer, utilizing expertise in network design, implementation, security, and monitoring.
SYNOPSIS :-
- A dynamic professional with nearly 7 years of extensive experience in Technical Support, Infrastructure Management , Project Management & Networking.
- Presently working with M/S Monnet Ispat & Energy Ltd.
- Proficient in setting up and managing IT Operations & Networks support.
- Excellent communication & interpersonal skills with strong analytical, organizational and relationship management abilities.
Experience :- 7 Years
- Currently working with Monnet Ispat & Energy Ltd. as in a position of IT Executive. Joining Date : - 11 May 2011 to till working
- FMS Engineer Working with CMS Infosystem Pvt Ltd. (01 Dec 2010 to 10 May 2011),BALCO
- On Job Trainee in HCL Infosystems Ltd. (June 2010 to November 2010), BALCO
- Junior FMS Engineer in CMS Infosystem Ltd. Kolkatta (March 2007 to April 2010)BALCO
- FMS Engineer in Cyber Infotek Indore(M.P.) (Sep 2006 to Feburary 2007)
- FMS Engineer in RT & T Services, Indore(M.P.) (June 2005 to June 2006)
- Computer Operator in Balco Employee Consumer & Thrift Society Ltd. BALCO(C.G.)
( Nov2003 to October2004)
ACADEMIC PROFILE :- Graduation
Degree :- Bachelor of Science.
Professional Certification :-
- Network Engineer Grade “A” From JETKING Indore (M.P.)
- Hardware Engineer Grade “A” From JETKING Indore (M.P.)
- CCNA (Cisco Certified Network Associate) ID No. CSCO11380544
- Diploma in Computer Application From MLC Rashtriya Patrakarita Vishwavidyalaya Bhopal
Network & Systems Management :-
- Managing the overall system administration.
- Installing, maintaining network & data communication hardware and software environment.
- LAN/WAN level 1 support (Diagnose and troubleshoot Network Problems)
- 800+ Desktop in Client as in Active Directory Services in Window XP3,WS7& Vista Platform
- Routing Protocol (OSPF,EIGRP,IGRP,RIP) and Routed Protocol (TCP/IP)
- IP Subnetting
- Installing & configuring Network Analyzer Software & performing Network Analysis
- Remote desktop access through Virtual Network Connection (VNC)
- Setup, configure and administer the Local Area Network (LAN)
Technical Support :-
- Troubleshooting problems pertaining to Performance Tuning, Network Connectivity, Inter VLAN Routing, Traffic Load Balancing and Quality of Services
- Troubleshooting problems regarding VPN, Leased Lines and ISDN circuits.
- Troubleshooting Firewall and Network Security related problems like Intrusions and Viruses
- Addressing queries regarding the Information System / Software & extending support to the clients including maintenance of hardware / software.
- Undertook troubleshooting of network connectivity problems and day-to-day operations
- Experienced with physical layer interfaces and cabling standards
- Performed Router configurations and troubleshoot LAN inter-networking problems
- Assisted with installation, maintenance and troubleshooting of network support equipment
Software Exposure :-
- Operating System : - Windows7, Vista, XP, 2000, 98.
- Server Operating System :- (a)Windows 2003 Server :- (b)LINUX
- Application :- Ms–Office2000,2003,XP,2007,Lotus Notes 6 & 8, Implemented MS Exchange Server and configured Exchange clients on all desktops for Enterprise mail and messaging using MS Outlook, SAP 710,Data Recovery,
- Outlook in Exchange Server, PDF Converter, Adobe Page maker, Photoshop, Corel & ACD See etc.
Implementation :-
Cisco IP Phone with Video Conferencing, Watch Guard Firewall Configuration, Etrust & MacAfee Antivirus , Active Directory Services in Client near about 500 PC, Lotus Notes in Client, Outlook with Exchange Server in Clients, Installation of CIS (Customer Information System)Software in Client of Kolkata & Hyderabad, Installation of Server of Model X3800 Series with RAID,
Key Skill :-
Troubleshooting Hardware, Network & Windows related issues like OS Installation, repairing and application software internet, web mail access and its configuration of Client PC and Laptops. SAP Gui710, Lotus notes, McAfee Antivirus, Ms-office2000, 2003/2007, Printer driver user’s data backup and restore using direct copy and windows default NTBackup. Joining of client Laptop/desktop in Domains and its troubleshooting. Logon script setting in users profile to access network folder as mapped drive, IP Phones, wireless connectivity, VPN Connectivity by Data Card for intranetworking Communication, Projectors.
Current Responsibility :-
- Provide Support with Branded Desktop (PC Hcl, Dell, HP, IBM), Laptop (Dell, IBM, Lenova ,HP) IP Phones, Switches, Terminal Servers, Common Problem Of Hardware, Network, Virus & also OS Level Support in ADS of More then 800 users in VLAN Network in Balco Plant.II

[Guest]

CURRICULUM VITAE

AMIT SHRINGI
E-MAIL : amitshringi AT gmail.com
shringi_amit AT yahoo.com



CAREER OBJECTIVE

To work for the organization and to grow along with the organization to satisfy the entire group that concerned with my organization and me in ethical and acceptable behavior. Strive for excellence and dedicate my skills for the achievement of organization goals and self. I’ am looking for a Challenging Assignments where. I can Add value and at same time Stretch my Capabilities To the optimum.
EDUCATION
B.E.(MECHANICAL) in 2008 from RAJASTHAN UNIVERSITY with 61.05%.
SSC in 2003 from AJMER BOARD(RAJASTHAN) with 63.39%.
HSC in 2001 from AJMER BOARD(RAJASTHAN) with 69.17%.
Projects/Plant Training
- I have done my B.E project on “MECHANICAL BELL” System.
- I have done Two months plant training in “KOTA SUPER THERMAL POWER STATION (KOTA)”
- I have done Two months plant training in “DCM SHIRRAM FERTILIZERRS& CHEMICAL (KOTA)”
- Training of PYRO-PROCESS by FLS for 2days.
SOFTWARE EXPOSURE
- A certificate course in M.S Office M.S. Word.
- Programming in Data Base, C and C++, Auto Cad, PRO_V, Windows XP
PERSONAL TRAITS
> Highly organized and dedicated with a positive attitude.
> Good grasping skills, self – motivated and willingness to learn.
> Adaptability to work in diverse working conditions under pressure
Organizing & Leadership Skills
- Class Representative during 11th & 12th STD.
- Cultural activities like dancing & my group of 4members organized “dandiya” programme in my college.
- Champion in Cricket competitions at school and college level
Hobbies
- Internet Surfing
- Painting ,Reading Novels, Listening Music, Dancing
- Lines About Me
I am a smart hard worker, I have Perseverance, Focused Approach, Strong will, Determination, Parent’s Blessings and God’s Grace, This is my formula for Success
- Confident, Creative and Committed, Comprehensive problem solving abilities, Adaptability and inquisitiveness.
- Strong but realistic belief in own capabilities and ideas, exhibiting a "can do" attitude & seeing problems as "solvable".

Experience – From 19 DEC. 2009 Till Now
AFTER done with Fabrication Erection and Commissioning of 2X85TPH (C.F.B.C) Boilers, Presently working in the Power Division of M/s Shree Cement Limited Ras, Pali (Rajasthan), An ISO 14001& &9001, OHSAS 18001, certified company, manufacturing Cement (shree cement, rock strong cement etc) as Mechanical Engineer from 19th DEC. 2009 to till date in its Power Division in Maintenance department of 2x50 MW.
There are 2 X 50 MW with four boiler, having 2 X 85 TPH (88 kg/Cm2, 520oC), 100 %- Pet coke base A.F.B.C. Boiler & 2 X 85 TPH (88 kg/Cm2, 520oC), 100% -pet coke base C.F.B.C. Boiler (Hot loop) (single drum, natural recirculation, semi outdoor type) make CETHAR VESSELS Ltd and Qingdao Jieneng Steam Turbine Group Co. Ltd. (China) make fourth extraction direct condensing turbine coupled to Jainan power equipment make generator. Both units are DCS controlled and synchronized with grid.
Erection work 2x150MW C.F.B.C. Boiler is under progress. The company installing the 2x150 MW Regenerating Captive Power Plant with Air cooled condenser. Boiler (CFBC) Capacity - 2x495 TPH make : Cethar vessels limited, thirchi. Turbine -double cylinder multistage reheat type make: dongfang power system limited (china).Recently it has commissioned 40mw whr boilers & 2x50mw boilers successfully. After successful commissioning of both the Units all the Generation
Power consumed to its own Eight Nos.cement divisions of capacity 3000 TPD each, and some power will export to grid.
Experience – From 1st November, 2008 to 16th DEC, 2009
Company Name : ORIENT CEMENT DEVAPUR (A.P.)
Department : Mechanical maintenance
Designation : Mechanical engineer

Looking after Kiln for line-1(FLS) of 3500TPD, Kiln for line-2 (KHD) 2700, And Pre- heater section.
I Handled kiln section, looking of maintenance of kiln. V.R.M,RAW MILL(Bucket elevators),BALL MILL, Gearboxes, Screw conveyors, Skewing of supporting rollers of kiln, adjusting kiln, maintaining migration, Dust Collectors, Maintaining lubrication schedule of all fan and DDPC.
Preparation of breakdown analysis Sheet, recording down time analysis, following corrective action plan. Maintaining of documents related ISO, TPM, and OSHAS.
Major Jobs
:
Kiln-1 & 2 shell changed 15.9 meter and 19.3 meter.
Kiln-1 outlet shell changed with outlet seal (lamina seal with graphite sealing)
Two months in commissioning work for 4200TPD Plant.
Experience –From (19th July, 2008 to 25th Oct. 2008)
Worked as a quality control engineer in IMI SOFT for Mobile Tower’s.
During this job I was the Quality control engineer to check the quality of all the mobile tower’s in Rajasthan.
NATURE OF DUTIES

1. Compilation of Project Reports and Planning of 2X85TPH Boilers.
2. Fabrication Erection and Commissioning of 2X85TPH Boilers.
3. Presently looking Maintenance work & shut down jobs of 4X85TPH Boilers.
4. Documentation, move order, issue & indent of spare parts & other material.

[Guest]

RESUME
K.INDRASENAREDDY
email :indrasenareddy_314 AT yahoo.co.in

OBJECTIVE :

Seeking an opportunity, this exposes to challenging in the field of Mechanical Engineering there by providing an environment for continuous professional development.
CURRENT JOB :

Working as an Sr. Engineer (Mechanical) in “LANCO INFRATECH LTD.” Since 08th Aug 2007 to till date.
Work Experience :
1. Present Project : Udipi power corporation ltd.
Client : UPCL Site,Udipi,Karnataka.
Project : 2X600 MW thermal power project.
Organization : M/s. Lanco Infratech Ltd
Experience : August 2007 to till date.
Designation : Sr.Engineer
RESPONSIBILITIES :
- Sea water treatment plant :Pre treatment plant,RO cum DM plant.
- Pre treatment plant : Clariflocculator erection,testing, commissiong.RGF,PSF tanks erection,testing commissioning.
- SS 316 L piping erection,welding inspection,testing.
- Erection of 600 NB GRP pipes,500 NB to 150 NB dia FRP pipes fabrication,erection, testing.
- GI piping erection,testing.
- CPVC pipes erection in different erection,testing.
- WPIL,KBL,Sintech,mather & platt ,Pump Engineering lnc.(AVS-2400).Milton Roy different capacities(5500 to 10 cum/hr.) of Vertical & horizantal Pumps erection ,testing ,Commissioning.
- Different sizes tanks erection,testing ,commissioning
- Sea water RO(One stream Parmet water capacity-225 cum/hr.) Pressure tubes & membaren erection,testing,Commissioning.
- BWRO(one stream capacity-100 cum/hr.)pressure tube & membaren erection,testing,commissioning.
- Mixed Bed system-vessels erection ,testing,commissioning.
- Tanks(dia-12 meters&12 meters height,6.5 meters&7.0 meters height) Fabrication&erection ,testing,Sand blasting and painting works.
- Fabrication and erection of cooling water(CW Duct) MS pipes of dia. 3750mm
- Sand blasting and painting work of ACW pipes
- Look after Non-destructive Testing and visual Inspection of welding
- Maintain all the documents of site (protocol).
- CW & ACW pump house Coarse Screen&Stop log screen guide ,gates erection.
- ETP plant :Different capacities ofVertical & horizantal pumps erection(200 to 25 cum/hr).Different dia pipes (CS,FRP,CPVC)erection ,testing works.conventional clarifier erection.
Educational Qualifications :
B.Tech. Mechanical Engineering passed out by April/may 2007 with First class degree from Annamacharya Institute of Tech & Sciences
University :
JNTU, Hyderabad (A.P)
Professional Qualifications
1. Certification in Project Management from PMI Noida.
Computer Cognizance :
CATIA, PRO E, CAD, CAM
MS-Office and
C- Language.
Personal Details :
Un-married, Born on 15th AUG 1985.
Languages Known :
English, Hindi & Telugu
Strengths :
- Positive Attitude, Mingling Nature & Withstands stress.
- Well-suited & ready to take up any kind of extensive work with lot of enthusiasm, patience & companion.

[Guest]

K.SURJITH KUMAR B.E.
E-mail : ksurjithkumar AT yahoo.in

CAREER FOCUS :
Seeking challenging assignments with a growth oriented organization which will help me to explore myself fully and realize my potential.
ACADEMIC RECORD :
COURSE NAME OF THE INSTITUTION BOARD OF STUDY YEAR OF PASSING MARKS
%
CGPA
B.E
(Mechanical Engineering) Bharath Niketan Engineering College Anna University 2009 70
Diploma In Mechanical Engg Thanapandian polytechnic college
DOTE 2006 70
X St.Britto.Hr.Sec.School. Tamil Nadu State Board 2003 60
WORKED EXPERIENCE :
NAME OF THE COMPANY DURATION DESIGNATION
RAREFIELD ENGINEERS PRIVATE LTD One year Pipe line Engineer in ship repair
RAREFIELD ENGINEERS PRIVATE LTD One year Pipe line Engineer in ship building
PROJECT :
Project at Bachelor of Engineering Degree : Solar Vehicle
COMPUTER PROFICIENCY :
Modeling Softwares : Pro-E, UniGraphics , & AutoCad.
Analyzing Softwares : Ansys 11NX
Others Packages : Windows 98, 2000, XP and MicrosoftOffice2007

[Guest]

TUSAR RANJAN SATAPATHY

E MAIL ID- stusarranjan AT yahoo.com
satapathy.tusarranjan AT gmail.com
________________________________________
MECHANICAL ENGINEER
Offering experience in Quality Assurance and Quality Control, Supervision, Management and Project Coordination.
________________________________________
- Professionally accomplished Mechanical Engineer, with invaluable experience in quality assurance and quality control, resource management and site coordination in Mechanical industry, with a flair for adopting modern Productio, Technology & methodologies in compliance with quality standards.
________________________________________
EDUCATIONAL CREDENTIALS
- Diploma in Mechanical engg.from S.C.T.E & V.T. Odisha.
Year of passing-2008
- +2(science) from C.H.S.E Odisha.
Year of passing-2005
- 10th from Board of secondary education, Odisha.
Year of passing-2003
- Now I am pursing B-TECH in IME
COMPUTER PROICIENCY
- Auto cad-2009, Master cam, Unigraphics, Pro-e, Catia.
- Ms-office
________________________________________
PROFESSIONAL EXPERIENCE
- Working in Indfab Projects Pvt.Ltd. Angul, Odisha since 15 February 2009 in Quality Assurance and Quality Control department and presently designated as Engineer.(QA/QC) (A Fabrication and Erection Company worked with NALCO, ADITYA ALUMINIUM, LANCO POWER, NINL,PETRON,NAGARJUNA POWER,ESSAR POWER and others)
- I had worked seven month as a DET in BOSCH CHASSIS SYSTEM INDIA LTD., PUNE
(MAR.2008 to OCT 2008)
- I had worked 4 month as an asst.faculty in CTTC, Bhubaneswar.
- Review the Manufacturers test /Outside Laboratory test Certificates, and Method Statements etc.
- Inspection of all the incoming material as per the approved QAP.
- Interacting with clients to understand their specific requirements and execute projects accordingly.
- Liasioning with Client / Consultant regarding the quality issues and taking approvals.
- Preparing quality assurance and quality control documents, issuing non-conformance reports and proposing corrective and preventive actions.
- Responsible for hard concrete surface inspection, repairing as per approved procedures.
- Establishing QAP, Proposed WPS, PQR etc.
- Taking Welder test, qualify them as per ASME, Interrupting Radiography films.
Project Handled
Fabrication & Errection of CW & ACW Duct of 4 x 660 MW Thermal Power Plant of LANCO BABANDAH POWER PROJECTS.
Fabrication of Chimneys & Duct lines of ECL under NALCO Smelter Plant.
Fabrication of Platform & Stairway of Nilachal Ispat Nigam Ltd.Duburi.
________________________________________ACADEMIC PROJECT
Project on CNC milling through MASTER CAM X2, from CIPET, Bhubaneswar.
Project on Simple, Compound & Progressive press tool, Hand injection & Compressive Mould.
CNC programming using Unigraphics (UG) software from CIPET, Bhubaneswar.
________________________________________
TRAINING UNDERGONE
- Level II certified by ASNT in Radiographic, Dyepenetrant, Testing.
- Attended Orissa State Safety Conclave 2011 in hotel Mayfair, Bhubaneswar.
- Welding Awareness course organized by Reliance Infrastructure Limited at Jamnagar.
- Quantity Surveying & Cost Analysis.

[Guest]

CURRICULUM VITAE
RAVISHANKAR PRASAD MAURYA
Email : ravipdmaurya AT yahoo.co.in
OBJECTIVE
To work in a challenging and dynamic environment, to keep adding value to myself and simultaneously contribute to the growth and success of the organization.
PERSONAL TRAITS
Self-Driven individual, having good communication and inter-personal skills with problem solving attitude.
Excellent Team player, who can take responsibilities and perform to the optimum level in tough situations.
EDUCATIONAL QUALIFICATION
1. B. E. (Mechanical Engg.) 2009 R.G.P.V. Bhopal 65.8%
2. Senior Secondary 2004 M.P. Board 81.7%
3. Higher Secondary 2002 M.P. Board 74.8%
COMPUTER SKILLS
- Operating System : Windows platform ( 98, 2000, XP)
INDUSTRIAL EXPOSURE
I have undergone an industrial training from :-
- CAR MECHATRONICS (BHOPAL) – 15 Days.
- S.G.T.P.S.(M.P.E.B) BIRSINGHPUR PALI. – 15 Days.
FIELD OF INTEREST
- HEAT & MASS TRANSFER
- MAINTENANCE ENGINEERING
EXPERINCE
COMPANY NAME- OMEGA
DESIGNATION- GRADUATE ENGINEER TRAINEE
DURATION- 1 YEAR
PROJECT
MAJOR PROJECT- Lunar Rover Space Research Car
MINOR PROJECT- Two Post Car Lifter
EXTRA CURRICULAR ACTIVITIES & HOBBIES
- Took active part in events such as debate, essay writing and extempore both at school and college levels.
- Student activity coordinator at School.
- Gate score card-2010
- Listening music and cooking are my hobbies.

[Guest]

i am interested in your company