www.edacengineering.com EDAC Engineering Ltd Chennai : Piping Supervisor

[muthukalee]

EDAC Engineering Limited Chennai : Piping Supervisor

Company Name : EDAC Engineering Limited

Company Location : Chennai

Designation (of vacancy) : Piping Supervisor

Company E-mail ID : hrd@edacengineering.com

Company Website : www.edacengineering.com

Job Description, Candidate Profile, Company Profile, Company Address :

PIPING ENGINEER/SUPERVISOR
Graduate Engineer/DME with 3-7 years experience in Fabrication & Erection CS, AS and SS Piping.

About us:
EDAC Engineering Limited (EDAC) is a joint venture construction company promoted by Southern Petrochemical Industries Corporation (SPIC) Chennai and EDAC Universe Pte Limited (EDAC), Singapore. The company has executed several prestigious projects in India and abroad in Oil & Gas, Power, Petrochemical and Chemical sectors. EDAC has extended its construction business in overseas by executing projects in U.A.E, Oman, Saudi Arabia, Jordan, Algeria, Yemen, Singapore, Malaysia, Curacao (the Netherlands Antilles).

Contact us:
EDAC Engineering Limited
SPIC House, No:88, Mount Road,
3rd Floor, Guindy,
Chennai – 600 032, India.
Phone: +91 44-22301941
Fax : +91-44-22301946

[kavilrajeev@gmail.com]

sir i am interested in this vacancy ,what i have to do

[karthikeyanjn]

RESUME

KARTHIKEYAN J.N. C/o P. Arumugam,
E-mail : jnkarthikeyan AT gmail.com

Objective :
Looking for a challenging assignment in piping design and engineering where I can explore and prove my potential and get the best out of me for the organization working for.
Education Summary :

Post Graduate Diploma in Piping Engineering from Suvidya Institute Of Technology, Mumbai.
B.E. (Mechanical Engineering) from Anna University Chennai (April 2010) – 74%
Diploma in Mechanical Engineering from Director of Technical Education
(April 2007) -83%
SSLC from Govt.Boys Higher Secondary School- Bhavani (April 2004) -72%

Technical skills :
Familiar with
- ASME B31.3, ASTM, API, BS, MSS-SP standards and piping commodity.
- Selection of the Flange Ratings and Pressure Temperature Rating Calculations.
- Pipe wall thickness calculation, Mitre bend & reinforcement calculations.
- Pipe rack design through Width, Height Calculations.
- Preparation of isometric drawings with Bill Of Material.
- Preparation of Bulk MTO using P&ID, Piping Material Specification and Valve Data Sheet.
Proficient in
- Plot Plan Development as per OISD-STD- 118.
- Developing pipe routing and layouts as per ASME B31.3.
- Use of vendor data in design.
- Tank Farm piping Design, Nozzle Orientations, Plat Form Elevations.

Knowledge in
- Piping stress analysis for critical & non critical pipe lines (using CAESAR II).
- Capable of learning any kind of software packages in a short period according to company requirement.
Software :
- Familiar with Auto CAD 2007, Solid Edge V20 and Femap.
- Knowledge in MS Office, CAESAR II and Ansys 10.0.

Project Details :
- Transient Thermo elastic Analysis of Disk Brake using Ansys Software- Engineering Project
- Design and Fabrication of Walking Machine using Links– Fabrication Project
- Automatic And Pneumatic Jack For Four Wheeler – Diploma Project

Extra Co-curricular Activities :
- Presented a paper on the topic of “Ceramic Coated in Combustion Chamber for Improving I.C Performance” in an assortment of Engineering College.
- Passed JUNIOR GRADE Typewriting English in first class with distinction

Inplant Training
- Sakthi Auto Component, Perundurai
- Kumaran Guru Motors, Gobichettipalayam

[Guest]

Sub : Application for the Post of Structural Draftsman
Dear Sir,
I have 7 Years of Professional experience as a Structural Designer/Detailer in the fields of
Oil & Gas, Petroleum, Thermal Power Plants and other Hydrocarbon industries. I wish to work in
A globally competitive environment on challenging assignments that shall yield the twin benefits
Of self realization and a steady-paced professional growth.
In view of the above I am pleased to enclose my detailed Curriculum vitae for your kind perusal.
I hope my merit and qualification will meet your requirement and sincerely expecting an opportunity
For an interview to prove the same. Should you give me the opportunity to prove my self to your
Company; I would be in position to make myself available to join in a short notice. I am willing
to relocate myself for any challenging assignments where I can prove my knowledge and
worth for the development of the organization.
Sincerely,

JINU K THANKACHEN
Email :jinoomvk AT gmail.com
Jija123 AT gmail.com
Experience Over 7 years of experience as a Structural Designer/Detailer in the fields of Oil & Gas, Petroleum, Thermal Power Plants and other Hydrocarbon industries.
M/s ASSOCIATED CONSULTING ENGINEERS (Feb.2005 to Till Date)
B-129 , Noida, New Delhi - 201301
Designation : Structural Draftsman
Job Nature : Preparation of G.A and Detailed fabrication drawings of Platforms, Pipe supports, Columns, Bracings stairs, Handrails, Gratings, Rafters, Trusses etc for Steel Structural like Thermal Power Plant, Large Industrial Buildings, Steel Plants, Oil Refineries etc and also Co-ordination with Site for erection & execution.

Running Projects
Tishreen Thermal Power Project -Unit II (2X200 MW)
Owner : PEEGT (Syrian Arab Republic)
Contractor : Simplex Infrastructures Limited Kolkata
Consultant : Bharat Heavy Electricals Ltd.
Lapanga Captive Power Plant- Unit II : Unit # 1 to 6 (6x150 MW).
Owner : Aditya Aluminium (A Division of Hindalco Industries LTD.
Contractor : L & T Limited
Sri Damodaram Sanjeevaiah Thermal Power Station(Unit#1&2) (2 X 800 Mw)
Krishnapatnam, Nellore (Dist), Andhra Pradesh.
Owner : Andhra Pradesh Power Development Company Ltd.
Consultant : Tata Projects Limited (Hyderabad)..
Mahan Captive Power Project- Unit II : Unit # 1 to 6 (6x150 MW)
Owner : Hindalco Industries Limited
Contractor : L & T Limited
Koradi Tps Expansion Project- Unit # 1 to 6 (6x150 MW)
Owner : Maharashtra State Power Generation Co LTD
Contractor : L & T Limited
North Chennai Thermal Power Project - Unit II : (2X600 MW)
Owner : ONGC-Tripura Power Company
Contractor : Offshore Infrastructures Limited.
Rajpura Thermal Power Project- Unit II (2X600 MW)
Owner : Nabha Power Limited
Contractor : L & T Limited, Baroda
4000 MW Ultra Mega Power Project
Owner : Coastal Gujarat Power Limited.
Contractor : Simplex Infrastructures Limited.
700mw Ccpp At Kovaya, Pipavav,Gujarat. Unit-1&2 (2X350 MW)
Owner : Ongc-Tripura Power Company Ltd.
Contractor: Snc Power Corporation (P) Ltd.
Bokaro `A' Thermal Power Station-(1X500MW)
Owner: Damodar Valley Corporation (Kolkata)
Contractor: Power Mech Projects Ltd.(Vijayawada)
Sikka Thermal Power Project. (Unit-3&4 (2X250 MW)
Owner: Gujarat State Electricity Corporation Ltd.
Contractor: TCE Consulting Engineers L.T.D.
Vallur Thermal Power Station. unit-II(2x500MW)
Owner: National Thermal Power Corporation Ltd
Simadri Super Thermal Power Project. Stage-II, (2X500MW)
Owner: National Thermal Power Corporation Ltd
Contractor: Tce Consulting Engineers L.T.D.Bangalore
National Capital Thermal Power Project
Stage –II ,unit 5 & 6,2 X 490MW
Owner: National Thermal Power Corporation Ltd
Contractor: Era Infra Engineers Ltd,New Delhi

Education
Diploma in Draughtsman (Civil) 2001–2003
N.C.V.T Conducted by Gov.of India.
Pre-Degree 1999–2001
Kerala University, Kerala
S.S.L.C. Board of Public Examination Kerala

Computer Skills - Windows
- Microsoft Office
- AutoCAD 2006
- Micro station
- Tekla(X-steel) basic

Place: NEW DELHI
Date : 03-07-12 (JINU K THANKACHEN)

[Unregistered]

I have 22/years exp. 20/ years in gulf in ha pipping tanks , structural in all type of fabrication.