www.citec-india.com Citec Engineering India Pvt Ltd Mumbai, Bangalore, Chennai : Piping, PDMS, Stress, Offshore

[Admin]

Company : Citec Engineering India Pvt. Ltd

Website : http://www.citec-india.com

Citec Engineering offers multi-discipline engineering solutions and project support. Our competence embraces capabilities in process, environmental, civil, structural and electrical engineering, as well as in automation and mechanical engineering. We also offer specialists in product development, modularisation, railway vehicles, waste-water management and more. We manage the full scope of projects, from start-up to commissioning, but we can also limit our services to a small, specific part of the whole process.

Citec Engineering India Pvt. Ltd. is looking for the following positions for their office in Navi Mumbai.
Citec Engineering provides advanced multi-discipline solutions and consulting services, focusing mainly on the power industry, industrial buildings, and vehicles industry.

Project Manager - Offshore


Responsibilities include, but not limited to, the following:
[LIST][*]Responsible for technical content of projects and able to quantify the work by estimating the manhours.[*]Prepare the scope document and responsibility matrix[*]Lead and manage an engineering team[*]Maintain engineering budget[*]Adherence to project scope and budget[*]Manage the engineering schedule[*]Document and manage the design change control and technical query process.[*]Obtain client and classification society technical approvals.[*]Coordinate engineering site support[*]Manage the Package Engineering project activities[*]Ensure proper project filing and document control[*]Maintain good client and customer technical relations[*]Adhere to HSE design requirements[/LIST]Qualification : BE/Btech in Naval Architecture/ Chemical/ Mechanical/ Marine/ Offshore/ Ocean Engineering
Experience is a must in FPSO ( Floating Production Storage Offloading), offshore oil & gas industry, upstream oil & gas, wellhead platforms.


Chief Design Engineer - HVAC
Looking for HVAC Chief design Engineer with experience in HVAC design, heat load calculations, duct design, equipment selection etc.

Qualification : BE/Btech Mechanical


Lead Engineer X-Steel
X-Steel modeling & Tracking,Calculation, Manhour calculation for the entire project,Structural Steel Detailing using- Tekla Structure 13.0/ 12.0 as a detailing tool.Steel Detailing and concrete detailing.
Qualification : BE /B.Tech Civil, Mechanical


Lead/ Principal Engineer (Inventor 2008 professional)
5 to15 years of product responsibility on module design that includes pumps, motors, moving parts on Inventor 2008/ Vault software.Strength calculations/ FEM modelling of the designed structures.Knowledge of Hydraulic/ pneumatic/ electrical drives
Qualification : BE /B.Tech


Tank Design Specialist
Should have min 5-12 years experience in Tank Designing specially Cone/ FLOATING ROOF TANKS/ Oil storage tanks with knowledge of ASME codes.
Qualification : BE /B.Tech Mechanical


Stress Engineer
[LIST][*]Experience in Piping design and modeling[*]Should have worked on PDMS and Piping stress analysis using ROHR 2, CAESAR II of POWER PIPING of STATIC, DYNAMIC, STRUCTURAL ANALYSIS. And Auxiliary analysis likes API 610, NEMA SM23.WRC 297.[*]Experience in Design of piping systems, knowledge of piping codes and standards, preparing piping layouts and design of piping support systems including spring hangers for steam, water and gas services.[/LIST]Qualification : BE/Btech Mechanical


Design Manager Concrete
Minimum 8-12 yrs of design experience. Familiar with the International Engineering Standards, such as ACI,AISC,IBC and ASCE etc. Familiar with the structural Engineering software such as STADD Pro,SAP2000,ETAB,SAFE,PCA etc. Good communication skills. Analyze and design steel and concrete structures of industrial, residential and commercial in nature considering wind and dynamic(seismic) loads. Capable of leading a team of engineers on a wide spectrum of engineering projects.
Qualification : BE /B.Tech Civil , M.Tech.Structures


Project Manager
BE with minimum 8 years/ Diploma with 8 to 12 years preferably in mechanical, experience in power projects consisting of IP, mechanical structures, electrical equipment. The job involves planning, scheduling and monitoring the engineering progress, cost control and also resource planning, utilisation and partner networking development.

Lead Engineer - Thermal Piping
Lead Engineer - Power Plant
Lead Engineer - Oil and Gas
Lead Engineer - Paper and Pulp Industries
Pipe Stress Analysis Engineer
Lead Design Electrical Engineer
The responsibility includes implementation and timely completion of detailed engineering packages. The job involves planning and scheduling, estimation and monitoring the project progress.
The candidate should be graduate/ diploma in mechanical and electrical engineering with minimum 8 years of experience in power plant, paper and pulp and oil and gas industry in detailed engineering. Knowledge of ASME/ DIN/EN standards, PDMS, Caesar 2 and Rohr 2 is preferable. For the Lead Design Electrical Engineer, the candidates should have knowledge of technical queries handling capability for electrical equipment sizing, specifications, single line diagram, various types of layouts and documents (lighting, earthing, cable tray, cable schedules etc).

Engineer Design - Civil Structural
The candidates should be graduate in civil engineering or post graduate into structural engineering with minimum 2 years experience into structural design for industrial structure, heavy equipment foundation etc. Working knowledge of STAAD is essential.

Engineer/Drafter XSTEEL
The candidate should be graduate/diploma/ITI with minimum of 2 years of experience in steel structure detailing. The candidates should be well versed in Xsteel/TEKLA for modelling, detailing of industrial structures, buildings, wall elements.

Drafter Autocad
The candidates should be graduates/diploma/ITI with minimum of 2 years of experience in RCC, detailing for industrial buildings and heavy foundations. The candidates should be well versed with Autocad.

Pipe Layout and Isometric Drawing Checker
The candidates should be graduates /diploma in mechanical or chemical engineering with 4 to 5 years of experience in PDMS. Experience in drawing checking is preferable.

PDMS Designer
The candidates should be graduates/diploma in mechanical engineering or ITI/NCTVT mechanical with 10 years of total experience with minimum of 3 years in PDMS.

Please send your application and CV to rohini-purohit@citec-india.com / hrd@citec-india.com

Contact person : Rohini Purohit (HR - Officer)
Tel No. + 91 022 67680210

BANGALORE
Citec Information India Pvt Ltd.
Lakshme Enclave
No. 43/41, Laskar Hosur Road
Adugodi
Bangalore – 560 030

Phone:+91 80 2213 3085+91 80 2213 3086+91 80 2213 3087Fax: +91 80 2213 3088

Managing Director: Mr. Ville Kuusisto

MUMBAI
Citec Engineering India Pvt Ltd.
1 Hermes Atrium, Plot No. 57, First floor,
Sector 11, CBD Belapur
Navi Mumbai 400 614, India
Phone: +91 22 6768 0200
Fax: +91 22 6790 3817
Sales Manager: Mr. Atish Rediz
Managing Director: Mr. Mukul Bhatia

CHENNAI
Citec Engineering India Pvt Ltd.
443, Guna Complex 304
Anna Salai, Teynampet
Chennai 600 018, India

[palanikumar.v]

CURRICULUM –VITAE


PALANI KUMAR.V.
E-Mail: v_ palanikumar AT rediffmail.com 166B POCKET-A3
v.palanikumar84 AT gmail.com MAYUR VIHAR PHASE-III
NEW DELHI-96.
Mobile: +919899611084 INDIA
HOME: 04639-243898

Objective:


To lead challenging career in drafting using design packages.
Getting accustomed to new challenging work environment.
To render efficient services to the organization I work with.

Technical Exposure


Having 3+ years experience in Design Department. Sufficient Knowledge and experience in Preparation of Arrangement & Detailed Drawings for Non Pressure Parts & Fuel Firing System (fuel piping & Isometric) for POWER BOILERS, AFBC & HEAT RECOVERY STEAM GENERATOR.

Experience: I


ORGANISATION NAME: M\S ALSTOM PROJECTS INDIA LTD.
NEW DELHI-100019.
PERIOD : 05/09/07-TO TILL DATE.
DEPARTMENT : BOILER & BOILER RETROFITS / PRODUCT ENGINEERING (designer)

Experience: II


ORGANISATION NAME: M/s. BHARAT HEAVY ELECTRICALS LTD.
DEPARTMENT : Product Engineering (Fossil Boiler)/ Fuel Firing System
Trichy.
DESIGNATION : Technician Apprentice
PERIOD : 1 Year

Nature of Work: 1


Preparation of Isometric drawings for piping system.
Preparation of piping drawing & pipe support drawing.
Preparation of oil, steam, air & gas piping layout and detail drawing
Preparation of Piping, fittings & flanges using for as per ASME & IBR standard code.
Load data & Location of Columns Drawings Preparation with reference to the Structure
Input.
Detail of ceramic bend as per piping input.
Arrangement & Detail drawings Preparation for Duct Supports.
Air Duct & Gas Duct Arrangement & Detail drawings preparation considering Fabrication and Erection aspects.
Detail Engineering Drawings for Expansion joints considering other matching components details.
Arrangement & Detail drawings preparation for Casings & Gas Baffles for HRSG considering Fabrication and Erection aspects
Liner & insulation Drawings Preparation for HRSG considering market availability of material and Erection aspects
Preparation of Order information & Bill of Materials.
Co-ordination with Out-Sourcing Review & Approval of Vendor Drawings & Documents.
Review & Approval of Offloading Drawings.
Preparations of erection frame arrangement & detail drawing.
Preparations of site related drawing.
Clarify the site issue drawing.
Brackets and Bracings drawings preparation for Boiler structure.

Nature of Work: 11


Preparations of HFO pump set & LFO pump set-piping Arrangements.
Drawn pipe routing for Boiler fuel oil systems, (HFO, LDO, AIR & STEAM
Routing for operating floor.)
Assembly and Erection Drawing preparation for HFO Heater set, HFO & LFO Oil
System arrangement with BOM
Detail drawing of the coal piping.

Projects Involved:


M/s CTCC SOTO DE RIBERA- (1x KA26-1) S.A
M/s Abu Dhabi Water & Electricity Authority Fujairah F2, UAE
5 X 400 MW GAS BASED COMBINED CYCLE POWER PROJECT
M/s Terga, Algeria
3 X 400 MW GAS BASED COMBINED CYCLE POWER PROJECT
M/s Ghannouch Tunisia, 1x400 MW GAS BASED COMBINED CYCLE POWER PROJECT
M/s SKOPJE Macedonia, 1x220 MW CYCLE COGENERATION POWER PLANT
M/s Phillips Carbon Black Limited, Durgapur
1 x130 TPH Tail Gas Fired Boiler.
Computer Knowledge:


Auto Cad 2009 well experienced with earlier version also.
Ms Office 2000 & 2003
PDMS- 11.6 (Piping)



Qualification:


Completed X grade in St. Francis Xavier Higher Secondary School.
Tuticorin / State Board with 84.4% in Mar 2001.
Completed XII grade in St. Francis Xavier Higher Secondary School.
Tuticorin / State Board with 64.0% in Mar 2003.
Completed D.M.E., in Govt polytechnic college, Tuticorin with 73.0% in
May 2006.

Personal Profile:



Father‘s Name : S.Velusamy
Date of Birth : 20/08/1984
Sex : Male.
Religion : Hindu.
Nationality : Indian.
Languages Known : Tamil, English.
Martial Status : Single
Passport Number : G1676014
Current CTC : 2.50Lac/Year
Expedition CTC : 3.00 Lac/Year

Declaration:

I hereby declare that the above mention particulars are true to the best of my knowledge

Place: New Delhi Signature
Date: 12.10.2009 (PALANI KUMAR)

[Guest]

CURRICULUM VITATE
Praful Uddhaorao Sonule
Email : sonule.praful50 AT gmail.com
OBJECTIVE : To secure a job in the Fire & Safety field where I can utilize my knowledge for the organization’s growth
EDUCATION
1. Dip. In Fire & Safety Engineering, Indian Institute of Fire Engineering, Nagpur in 2010 with 70.36 %
2. 12th from Maharashtra State Board Examination. In 2006 with 40%
Professional Experience :- 8’Month
(From Jan’2011 to Till Date)
Company : VVF Ltd.
Post : Fireman
Responsibility : 1) Implementation of emergency Response Procedure
2) Fire prevention & Enforcement
3) Inspection of equipment
4) Implementation of fire fighting Techniques
ROJECT WORK (IIFE)
1. Built Knowledge of Safety in Construction Site.
COMPUTER SKILLS
1. Certificate of M.S office in 2007 with 72%
2. Certificate of MSCIT in 2007 with 56%
TRAININGS / CERTIFICATIONS
1. one month training for safety in construction site (in Sew Infrastructure Ltd)
2. NCC Training with Grade-B