-
November 17th, 2010, 02:37 PM
Post Count Number #1
www.shell.com.qa Qatar Shell Service Company : Commissioning Supervisor
Qatar Shell GTL Qatar : Commissioning Supervisor
Company Name : QATAR SHELL PEARL G.T.L
Company Location : QATAR
Designation (of vacancy) : COMMISSIONING SUPERVISOR
Company E-mail ID : konetikrishna@yahoo.com
Company Website : http://www.shell.com.qa
Job Description, Candidate Profile, Company Profile, Company Address :
EXCUTIVE SUMMARY
8.6 years of relevant hands-on Experience (including Gulf Experience) in the D.C.S &FIELD of Oil & Gas, Refinery Operation as well as in Commissioning Activities
ACADAMIC QUALIFICATION
DIPLOMA IN CHEMICAL ENGINEERING
Career Objective:
To pursue a promising career in a challenging and rewarding environment and to put my best efforts enriching my knowledge and skills so as to imbibe and impart the best of my efforts towards the overall, individual and organizational growth.
Abilities :
My experience enabled me to work effectively and efficiently resolves industrial support request at quality and quantity levels set for production. Also can merge with other technicians and engineers to better understand their suggestions and request and to make best decision for production.
Expertise achieved :
• Good operational knowledge of refinery & petrochemicals..
• Good operational knowledge of Utility..
• Good hand on DCS&Field
• Start up & Shut Down of plant
Job Responsibility :
• Independent charge of plant.
• Controlling & monitoring all the process & parameters as per SOP.
• To achieve the production Target with Safety.
• Responsibility for quality of production.
• Manpower Handling
• Reporting to Sr. Engineer and HOD.
Activities carried out during Pre-commissioning : -
Carrying out system checks with P&ID, Preparing punch list / clearance of punch list, Chemical cleaning / Flushing /Air blowing / Inertization of the system as per the commissioning plan, Instrumentation / control / ESD logics / Interlocks checking, Catalyst loading, System tightness test, Test run of rotating equipments, Combustion furnace refractory dry out, Alkali boil-out of steam drum and waste heat boiler. Vessel Inspection before final Box-up.
Activities carried out during Commissioning : -
System preparation, Ensuring availability of utilities, feed stocks and safety systems, lining up and start up of the plant with feed cut-in. Stabilization at minimum turndown capacity and load increase to design capacity.
Contact us:
Qatar Shell Service Company W.L.L.
P.O.Box 3747
Al Mirqab Tower - 1st Floor
Corniche Road
West Bay
Doha
State of Qatar
Last edited by muthukalee; February 9th, 2011 at 01:41 PM.
-
November 26th, 2010, 09:46 PM
Post Count Number #2
Re: Qatar Shell GTL Qatar : Commissioning Supervisor
ROBIN TOMY
Avanakkattuparambil
Karuvatta North P.O
Alappuzha (Dist) Kerala
India-690554.
Profession : PIPING SUPERVISOR
Personal Details
Name : ROBIN TOMY
Date of Birth : 09-01-1990
Nationality :INDIAN
Religion : Christian -RC
Sex : Male
Marital Status : Single
E-mail ID : robikvta AT gmail.com
Language Known : English, Hindi, Malayalam, Tamil
Educational Qualification
· S S L C
Technical Qualification
· Diploma in Mechanical Engineering
· STCW
-
June 15th, 2011, 03:45 PM
Post Count Number #3
Application for the Post of Commissioning Supervisor in Qatar Shell
POSITION : Commissioning Supervisor
D.Venkatesan
EDUCATIONAL QUALIFICATION B.Sc Engg.
ADDITIONAL QUALIFICATION Boiler I Class Attendant Proficiency
(Issued by Controller of Boilers, Govt. of India.)
E-MAIL dvenkatesan1960 AT yahoo.com
SUMMARY : Total 30 Yrs. experience in the field of Commissioning, Start up, Operation in Process and Utilities & Offsite Plant Activities in Fertilizer and OIL & Gas Processing Plant,
Preparation of PMC Method Statement, Mark up P&ID, Test Pack Review. PTW system, :
26 Years worked in Madras Fertilizers Limited, Chennai, India in Commissioning & Operation of the Plant.
1 Year in QATAR, Oil and Gas Plant Project in Commissioning Common Sulphur Project
1 Year in SAUDI ARABIA, Oil and Gas Plant Project in Commissioning the Plant.
Commissioning & Operation of
Air Compressor Packages –Reciprocating, Centrifugal & Rotary of Atlas Capco, Khosla and Elliot make.
Refrigeration Compressor Packages –Reciprocating, Centrifugal & Rotary of York, Atlas Capco, Make.
Utility Boiler (HHP) & HRSG Boilers High Pr. Water tube Gas, Oil and Coal Fired Boilers of MACCHI, BHEL & Thermax make.
Water treatment Packages – R.O.Plant, D.M. Plant, Desalination & Potable water of Ion exchange make.
High Pr, MP, Low Pr & Low-Low Pr., Acid Gas Flare System.
Effluent Treatment Plant of Ion Exchange Make.
Water Injection System in Oil Wells,
Precommissioning of Well Head Pipelines & their systems.
PROFESSIONAL EXPERIENCE :
HOFINCONS (A TRANSFIELD SERVICES GROUP COMPANY) Manager – O & M
2010 TO TILL DATE
Operation & Maintenance is the core field of Activity of this company. It has 30 Sites across India.(Some are in Petrochemical, Ferrous & Non-Ferrous field and the rest are Cement Plants associated with Power Plants)
Maintaining Operating parameters stipulated by the Clients, in the plants concerned.
Having close watch on Chemical feeding/Injection into the system and their Optimum Usage & Inventory controls
Trouble Shooting the problems associated with Power Plant Operation
Coordinating the Maintenance Activity at site.
Manpower allocation & providing them necessary facilities at site
Imparting Training to the Operating Personnel.
Coordinating in the Assessment of the Employees working at site.
Duly Reporting the Status Regarding Operation, Safety, Incidents (if any) etc., to the Unit Head.
SNAMPROGETTI SAUDI ARABIA LTD.
Commissioning Supervisor
2008 To 2009
(Saudi Aramco’s Project) Khurais Utility Project Under Saudi Aramco Precommissioning, Commissioning & Operation activities in Utilities & Offsite.
Preparation of Method statement, Mark up P & ID, Test Pack Review.
Water Injection System in Oil Wells,
Water Injection Pumps are run by Gas Turbine Sets.
Precommissioning of Well Head Pipelines & their systems.
Instrument Air Compressors Multistage Centrifugal 5 Nos. of 3600 NM3/Hr Capacity (each) of Cameron make with Air Dryer package.
Nitrogen Generation Plant with Liq.N2 storage Back up of 1060 NM3/hr capacity.(Membrane Technique is used in the process)
Desalinated & Sea Water System with Chemical Dosing Injection system.
DM Water Plant 200 M3/Hr each capacity of 2 No. Train.
Tempered Cooling water System of 15000 M3/Hr Capacity for cooling process/utility equipments.
Auxiliary (Utility) Boiler Macchi make 3 Nos. Gas Fired, Water Tube.
5 Nos. HRSG of GE turbine exhaust of 40 T/Hr each capacity of Macchi make.
Potable Water Package unit of 60 M3/Hr Capacity with Refrigeration chiller for Drinking Water.
Fire Water Ring system includes Deluge, Sprinkling, Foam maintained by 3 No. Diesel driven pumps of
1370 M3/Hr capacity (each).
Off Site Includes :
- HP, MP & LP flare system with drain system
- Off Spec, storage & Other storage Tanks Area.
- Waste Water Treatment Area.
Sea water Inlet/Outfall.
AL JABER ENERGY SERVICES,QATAR Commissioning Supervisor
2007 To 2008
(Qatar Gas Project)
Client : Qatar Gas Company. Nature of Job: Commissioning of Common Sulphur
Preparation of Procedures for various activities such as Hydrotest Precommissioning checks, Chemical Cleaning & Boil out, Steam Blowing, Conducting Guarantee Test runs, ,adhering the Safety at all activities.
Checking & Reviewing P & ID’s and GA Drawings.
Conducting full load Performance Guarantee Test Runs, establishing acceptance criteria, Handing over the System/Plant to the Clients.
Knowledge on Commissioning of various standard packages like BFW/CW Pumps, Dosing Systems for Boiler Feed Water/CW System etc.,
Quad Petroleum,
Vietnam
2004 To 2007
(Phu My Fertilizer Plant)
Client : Phu My Fertilizer Plant.
Nature of Job : Commissioning of Fertilizer Plant
Preparation of Procedures for various activities such as Hydrotest, Precommissioning checks, Chemical Cleaning & Boil out, Steam Blowing, Conducting Guarantee Test runs, ,adhering the Safety at all activities.
Checking & Reviewing P & ID’s and GA Drawings.
Conducting full load Performance Guarantee Test Runs, establishing acceptance criteria, Handing over the System/Plant to the Clients.
Knowledge on Commissioning of various standard packages like BFW/CW Pumps, Dosing Systems for Boiler Feed Water/CW System etc.,
MADRAS FERTILIZERS LIMITED,INDIA Shift in Charge (Deputy Manager)
1981 To 2004 Carrying out the day-to-day activities, logging & giving shift end reports to Manager. Coordinating the Maintenance Activities, Ensuring Safety in the activities,etc.,
Assistant Manager, Senior Production Engineer :
Monitoring the Performance & Activities of the Plant in the shift. Assisting Deputy Manager & Logging the Events in the Shift.
Technical Assistant/Sr. Technical Assistant :
Joined as Technical Assistant Trainee in Production and undergone rigorous In-plant training for two years. Later absorbed as Technical Assistant. After 5 years of service, promoted to Senior Technical Assistant.
Detailed work exposure :-
- Assist in solving the problems related to process by monitoring parameters, design features etc.
- Assessment of technical problems & solving them to improve Quality, Productivity thereby saving energy and minimizing down time etc.
- In carrying out study on Technical issues, contacting & discussing the issues with the concerned persons both in field & Office level employees
- Organizing Lab analysis (if needed) to evaluate the correctness of the system.
- Assist in carrying out pollution control and various projects
- Preparing operational points in each stage of production to solve the issues.
- Training (if needed) the operational crew for safe plant operation.
- Checking the adherence of Safe Operating Procedures for Units and independent Equipments.
- Participating in the Taproot Analysis of the equipment failure analysis.
- Identifying & analyzing the limitations in the operation of the plant.
- Proposing recommendations to my superiors to carry out the deviation in the plant operating procedures /
to carryout necessary modifications.
- In case of projects, review of Tender Documents, Review of P & ID for plant modification, review of P & ID proposed by vendors,
- Development of process specifications for necessary equipments.
- Monitoring of important parameters of Ammonia & Urea Plants for study purpose on daily basis.
- Reporting to Senior Chemical Engineer and contacting other plant personnel (for continuous updation interms of operation)
-
August 3rd, 2011, 12:40 AM
Post Count Number #4
comissioning water treatment plant
- EMAIL manojpatel1969 AT yahoo.com
MANOJ PATEL
SUMMARY OF WORK
- Operation and Maintenance of Utility plants
- Logging of parameters and Loading, Unloading of chemicals.
- Handling of product and Raw Material.
- Preparation of Equipments for various maintenance jobs after taking necessary work permits.
- Sampling of various chemicals and logging of production reports.
- Can work in all shifts including Night shifts.
- Start up, shut down and daily activities of plant
- Successful handling of equipment like Compressors, Blowers and Boilers, Fan, columns.
- Compliance of HSE rules and adherence as per integrated policy of safety, Environment and occupational health.
- Participate in various training programmed like safety, fire fighting and emergency response.
- Demineral water plant operation with mix bed unit.
- Handling and operation of cooling tower for cooling water.
- Ammonia storage and its handling.
- Seawater close loop cooling system.
EDUCATION
1. [ YEAR ]1990 SARDAR PATEL UNIVERSITY GUJARAT
BACHELOUR OF SCIENCE (CHEMISTRY)
2. ALL INDIA TRADE TEST (APPRENTICESHIP) –YEAR 1994 CHEMICAL PLANT OPERATOR.
3. Post B.Sc. diploma in ANALITICAL Chemistry in 1991.
4. Basic Diploma in Computer Application of one year course in year – 1991.
5. INDUSTRIAL PURCHASING AND MATERIAL MENAGEMENT, from M.S.University, Baroda, year – 2004.
COMPUTER SKILL :-
- MS Word, Excel, Power point
- Lotus Smart suit
- SAP
- O&M (Operation & Maintenance) reporting software
1). PROFESSIONAL EXPERIENCE FROM 1994 TO 2011 ( TOTAL 17 YEARS) G.S.F.CO.LTD IN UTILITY PLANT.(01/06/94 TO 26/02/2011)
2). SAUDI ARABIAN FERTILIZERS CO., SAFCO, SABIC, AL JUBAIL, SAUDI ARABIAN FERTILIZERS CO. IS A SABIC AFFILIATED HAVING 4 UREA-4AMMONIA & 4UTILITY PLANTS LOCATED AT AL JUBAIL, SAUDI ARABIA.
Process Trainer Utility from 27 Feb. 2011 ….Conti.
Working as a Process Trainer, it need to impart operation training to all Operation Staff
regarding continue supply of all require utilities
Responsibilities :
- Identify training need of Operating Staff (Field Operators, DCS panel Operators) working in Utility plant and Impart field as well as class room training regarding entire aspects of Plant Operation as per Job Qualification Program set by SAFCO.
-
August 17th, 2011, 02:55 PM
Post Count Number #5
Commissionig Engineer/Supervisor.
CURRICULUM VITAE
Application for Commissioning Engineer/Supervisor.
Name : PRASHANT GOVIND BARVE.
E-Mail Address : pbarve4 AT yahoo.com / pbarve4 AT gmail.com
Qualification
1) Passed Diploma in Petroleum Technology with 59.5% of marks from the
M.S. University of Baroda, in the year 1984.
2) Correspondence Diploma in Industrial Safety.
In April 2000, From National Institute of Labor Education & Management.
SUMMARY OF EXPERIENCE.
Good knowledge of Process & Utility Operations, Pre-Commissioning / Commissioning, Initial Start-up, General Safety procedures, PTW system, Confined Space Entry Procedure, Personal Survival Techniques.
Experience in
- Central Control Room & Field Operations for Process , Utilities & Offsite Plants.
- Writing Work Method Statement (WMS) ,Commissioning Procedure & JSA.
- Developing Detail Pre-Commissioning /Commissioning loops based on P&ID’s.
- Performing system walk down To initiate punch points & follow up for clearance the punch points.
- To Execute Pre-Commissioning /Commissioning activities .
- Confirmation checks for the Cause & Effects, Process interlocks and ESD system.
- Acceptance of the work performed by the contractors.
- Initial Start-up, Trouble Shooting, and to conduct performance test & GTR.
- To coordinate with Licensor, Client, PMC, Vendors, Contractors, Commissioning & Start-up team.
- To provide Field & CCR Operation training for client’s operations staff.
SERVICE EXPERIENCE
Since Jan 2011 Working with Brunel India as a Field Engineer for HMEL- Refinery at Bhatinda-Punjab. Experience in Performing system walk down to initiate punch points & follow up for clearance the punch points. Marking-up Pre-Commissioning & Commissioning loops for the system & writing Pre-Commissioning / commissioning procedures, and Executing the activities on site.
Jan 2010 To May 2010 Worked with Brunel India Pvt ltd as a “Lead Commissioning Operator” for Cairn Energy at Barmer Rajasthan-India, Experience to lead Pre-Commissioning & Commissioning activities for Well Pads and it’s associated system, Injection water , Power fluid Onshore Oil terminal Processing facilities , Cross Country pipeline.
From 04th May 09 To 10th Jan 2010 Worked With MOBIZ Consultant as a Commissioning Engineer , For Foster Wheeler in Singapore, Experience in Pre-Commissioning & Commissioning of Ultra High Pressure , High Pressure , Medium Pressure , Low Pressure Steam & its associated pressure let-down & de-super heating & Condensate system for MEG plant.
From Oct 2007 To 31st March 2009, worked with Dodsal for TAKREER .REFINERY(ADNOC) IRP project in Abudhabi as a "DCS Engineer Commissioning" Responsible for Pre-Commissioning & Commissioning activities of Refinery Tank farm, Petroleum product transfer , & CCR Operations for smooth running of 239 Km Cross Country Pipeline ,Receiving & dispatch Terminal Operation using Honeywell PKS 200-C control system. Underwent training pertaining to H2S handling & Takreer’s PTW system. .
Since July 2007 To Oct 2007 worked With Alpha Projects for L & T for their ONGC’S BCP-B2 Offshore project
At Surat hazira, experience in Commissioning of Booster Compressor & associated system.
Duration : From 12th June2006 To 24th March 2007
Worked with CTSD Ltd, as a Commissioning Supervisor, for their LNG-II, project at Yuzhno-Sakhalin- at Russia, Experienced to carry out Pre-Commissioning & Commissioning activities in hot & cold sections of LNG process plant in a safe manner.
Duration : Feb 2006 to 5thJune 2006
Work for CAIRN ENERGY on short-term job assignment for their Off-Shore Operations at Surat-Hazira experience in Offshore Gas producing platform operation
Duration : July 2005 TO Feb 2006
Worked for Jubail United Petrochemicals Company, Saudi Arabia.
(JUPC) as a Commissioning Operator. Experience in writing Commissioning procedures, & to carry out Pre-commissioning & Commissioning activities on Instrument Air Compressor, Nitrogen Generation & Distribution system.
Duration : Sep 2004 TO Mar 2005
Worked with CAIRN ENERGY as a Operation Specialist, at Hahira –Surat, Experience in Onshore Gas Processing Such as Gas Filtration, Separation and Purification, TEG regeneration, Propane refrigeration system – For Dew point control, Sales gas system Condensate Stabilization unit, etc Also involved in Gas producing Offshore Platform operation
Duration : May 2004 TO Aug 2004
Worked with L & T (O.G.S.P), as Commissioning Specialist for their
Project at Tanzania Experience in commissioning of 70 MMSCFD Gas processing plant sections
Such as Raw Gas receiving and separations, Dew Point Control system, Condensate Stabilization,
MEG regeneration system. Also underwent training pertaining to H2S handling & safety .
Duration : Jan 2004 TO April 2004
Worked with HYUNDAI Engineering & Construction Co Ltd, as a “DCS Operator” for
ATAS Gas Project, in LIBYA. Experience in writing Pre-commissioning & Commissioning
Procedures, SOP, preparation of loops for Pre-Commissioning activities.
Duration : Sep 2003 TO Jan 2004
Worked with Promentec Consultants, for L & T (OGSP) as a Commissioning Specialist
Experience in Pre-Commissioning & Commissioning activities of water Injection
Facilities of MNW offshore platform
Duration : May 2001 TO Jan 2003
Worked with Al-Sultan Group UAE, as a ‘Commissioning Supervisor’ for Total South Pars
Phase 2 & 3 project at Iran. Experience in Pre -Commissioning & Commissioning of 2000 MMSCFD, Gas plant’s units, such as Fuel Gas System, Fuel Gas Pr. Reduction system, Fuel Gas
Conditioning skid, Sour Water Stripping unit, Steam Turbine Generator, Gas turbine Generator, Nitrogen generation storage & distribution, Instrument Air Compressor and its associated system, Since March2002 to Jan 2003 worked as a Start –Up Support Specialist in Production Section. Responsible for CCR & Field Operation activities and authorized to sign the PTW for allotted area. Also underwent training pertaining to H2S handling & safety .
Duration : Feb 2001 TO May 2001
Worked with Alpha Project and services for Guj. Chemicals Port Terminals Co.Ltd, as a
Commissioning Specialist, Experience in Commissioning of Propane / Propylene Storage
Tanks, transfer & its Boil off gas liquefaction system.
Duration : June 2000 TO Aug 2000
Worked with Promantec Consultants, for O.N.G.C Experience in Commissioning of GGS and it’s
Associated system.
Duration : Dec 1999 TO Mar 2000
Work with Bansari Technical Services, for Indian Petrochemicals Corporation Ltd,
Experience in Commissioning of (EPRU) Ethane /Propane Recovery plant unit such as Inlet Gas compressor (steam – driven), CO2 Absorber, Amine regeneration and associated system.
Duration : July 1999 TO Dec 1999
Worked with Bonace Engineering, for Reliance Refinery Experience in Commissioning of
Refinery Tank Farm and its associated system.
Duration : NOV.1998 TO JUNE 1999
Worked with Bansari Technical Services for Gas Authority of India Ltd, (GAIL)
Experience in Commissioning of Utilities & Offsite units of Ethylene producing Gas Cracker
Plant such as HP/MP Hydrogen Compressor, High Pressure hydrogen storage and transfer facilities, Ethylene Storage (DWT) and transfer system and it’s associated Boil off Gas compressor system.
Duration : Nov.1996 TO Sep 1998
Worked with Abu Dhabi Water & Electricity Authority as a ‘Supervisor’. Experience in H & B
DCS Panel Operation for 24,000M3 /hr Desalination Plant, 140 T/H at 45 bar Boiler, Steam
Turbine generator, Fuel Gas pressure reduction and Conditioning facilities.
Duration : Jan 1996 TO Aug 1996
Worked with Gujarat Flurochemicals Ltd. As a “Panel Operator” Experience in Tata
Honeywell TDC 3000 DCS panel operation for CFC (Refrigerant Gas) plant.
Duration : May 1992 T0 Aug.1995
Worked With Ministry of Water & Electricity Qatar, As a “Desalination Plant Operator”
Experience in Operation of MSF Desalination Process & Waste heat Boiler and relevant
System.
Duration : Nov 1990 TO July 1992
Worked with Deepak Fertilizers & Petrochemicals As a “Plant Operator” Experience in Tata
Honeywell TDC 3000 Panel & Field Operation for 300 MTPD Weak Nitric Acid Plant.
Duration : Dec 1985 TO Oct 1990
Worked with Philips Carbon as a ‘Plant Operator’ Experience in CCR & field operation of
Carbon Black process plant’s sections such as Hydrocarbon Cracking reactor, filtration,
Palletization, Rotary Drum Dryers, bucket elevator, oil storage & transfer.
Duration : June 1984 TO July 1985
Worked with ABS Plastics Ltd, as a “Trainee Plant Operator” Experience in Utilities plant
Operation & Extruder Plant Operation.
Personal Skills : Good Communication, Inter personal skills experienced in working with diverse cultures, high initiative, self motivated with good management skill.
Total Years of Experience 23 Years.
Expected Compensation : Negotiable.
Availability : Immediate.
Prashant Govind Barve.
-
September 8th, 2011, 08:07 PM
Post Count Number #6
West Bengal
CURRICULUM VITAE
Email - id : - mallick_1965 AT yahoo.co.in / kalamallick AT yahoo.com
Sabir Mallick
Qualification : Higher Secondary (P I E C, Patna)
Technical Qualification : DIPLOMA IN MECHANICAL ENGINEERING 1985 TO 1988
: NAVEEN RAJKIYA POLYTECHNIC (first division)
Details of working experience
Name of the organization : ABB Spa italy
Client : British Petroleum/Statoil /Sonatrach JV
Designation : Insulation & Refractory Expert
Period : 05th April to 21st July TAR-2011
Name of the organization : JGC / KBR
Client : Pearl GTL shell
Designation : Refractory & Insulation Supervisor
Period : 6th March 2010 to 30Th February 2011
Name of the organization : IHI CORPORATION (JAPAN)
Client : Sonatrach (Algeria) GP1/Z PHASE 111 Project,
Designation : Fire proofing & Insulation Supervisor
Period : 27th May2009 to 19th Feb 2011
Name of the organization : JGC MIDDLE EAST FZE
Client : Dolphin Energy Onshore upstream Project (Doha Qatar)
Designation : Refractory QA/QC & Insulation
Period : October 2006 to Till December 2007
Name of the organization : Mitsubishi Heavy Industries Ltd.,
: DP Project Site (Haldia)
Client : Mitsubishi Heavy Industries Ltd. (Japan)
Designation : Sr, Insulation Supervisor
Period : 15th April 2000 to 20th July 2000
Name of the organization : TOYO Engineering India Ltd.
: Sister concern of TOYO Engineering Corporation, Japan
Client : Haldia Petrochemicals Ltd.
Designation : Sr, Insulation & Refractory Supervisor (Naphtha Cracking Unit)
Period : 1st April 1999 to 31st March 2000
Name of the organization : Meisei International Pte ltd (Singapore)
Client : Mitsui Bisphonal Ltd.
Designation : Sr, Insulation Supervisor
Period : 11th October 1998 to 9th March 1999
Name of the organization : Larsen & Toubro (Oman) LLC
Client : Oman Steel
Designation : Sr, Refractory supervisor & Ceramic Module/ Insulation
Period : 15th September 2000 to 27th September 2001
Name of the organization : Consolidated Contractors International SAL (CCC)
Client : ADGAS 3rd LNG Train Project Das Island (Abu Dhabi) UAE
Designation : Sr, Insulation Supervisor
Period : 31st March 1994 to 17th March 1995
Name of the organization : Ahmed Mansoor AL A Ali Co.
Client : Mitsubishi Heavy Industries Ltd. (GPIC Bahrain)
Designation : Sr, Refractory & Insulation Supervisor (Primary & Secondary
Period : 10th January 1997 to 15th September 1998
Name of the organization : Cape East Ltd
Client : Fujeriah Cement Industries UAE
Designation : Sr, Refractory & Insulation Supervisor
Period : 3rd May 1995 to 20th December 1995
Name of the organization : Karrena Germany Ltd SAFCO Project Saudi Arabia
Client : UDHE ARABIA LTD.
Designation : Sr, Supervisor Refractory works primary & Secondary Reformer
Period : January 2005 to May 2005
Name of the organization : Karrena Arabia Company Ltd (Saudi Arabia Hadded)
Client : DANIELI (ITALY)
Designation : Sr, Supervisor Refractory works for Walking
: Earth furnace (120 Ton per hours)
Period : May 2005 to December 2006
Post Applied For Senior Refractory & Insulation Supervisor
20 years experience in different project site, in India & Abroad, all type of furnace work and insulation work experience:- in detail, Naphtha Natural Gas Reformers, Process Fire Heater, Petrochemical Cracking Furnace, Catalytic Reforming unit, Tunnel Kilns, Electric Furnace Ladle Refining Furnace, Thermal Incinerator, In Line Heater and DSO Incinerator, Thermal Reactor, I ma Work PLIBRICO Japan co. Ltd, GOUDA vuurvast, KARREENA Gmbh, KARREENA Saudi Arabia , JGC MIDDLE EAST FZE, TOYO ENGINEERING CORPORATION, MITSUBUSHI HEAVY INDUSTRIESE LTD, TOYO ENGINEERING INDIA LTD, LARSEN & TOUBRO OMAN LLC, CCC ABUDHABI, Meisei International Pte Ltd Singapore, CAPE EAST Abu Dhabi, JGC middle east fze Qatar .
IHI CORPORATION JAPAN, Algeria GP1/Z PHASE 111 Project, JGC/KBR PEARL GTL SHELL QATAR, At present employee ABB spa (Italy) From Bp/Sonatrach /Statoil (In Amenas JV Gas Algeria)
Training & Seminars
- Safety induction training
- PTWS (Permit to work system) training
- Project quality plans
- got training by JGC/KBR for the insulation work of Pearl GTL SHELL Project QATAR
- got training by BP for the golden rules and authorized process PA for PTW.
Senior Supervisor/ Quality Control Inspector for Insulation/Refractory
Refractory / Insulation supervisor with all type of Refractory furnace work for the last 20 years in different Project site in India & Aboard.
Professional Experiences
I am adequately experience in the field of Thermal Insulation ( HOT & COLD) Acid / Alkali proof lining Refractory, Anti-corrosive treatment works and PUF- Insulation work and have worked in several Esteemed organizations in various plants such as fertilizer, chemical, Refinery, Petrochemical, Cement Plant, Steel Plant. Etc. I am familiar in all type of insulation and fabrication, cladding, fire proofing acid Proof lining, Water proofing work. Experienced in handling man power for a valuable output and doing all the paper works. I use to have meeting with subcontractors as well as with client for sorting out the Problems. Familiar in working as per P & ID and GAD and Isometric
I am experienced in working with multinational employees of different back ground and field Specialization. I declare that the above statement is true to the best of my knowledge.
-
October 17th, 2011, 01:49 PM
Post Count Number #7
Application for the Post of Commissioning Supervisor
RESUME
Mr. : DHOKALE NIKHIL BABAN
Email : nbd53 AT rediffmail.com
Career Objective
To Gain Expertise In A Multitude Of Facets Of The Organization. My Analytical And Quantative Skills Combined With MY Knowledge And Dedication Will Be A Great Tool In Efficiently And Effectively Handling The Responsibilities And To Achieve The Ultimate Goal Of Development Of The Organization.
Academic Qualification
Diploma in Chemical Engineering from Khopoli Polytechnic of Mumbai University
Additional Qualification : - Piping Engineering & Technology.
Course Contents- 01) Plot Plan
02) Equipment Lay-out
03) P & ID, Isometric
04) Pipe scheduling & pipe fittings
05) Stress Analysis
06) CAESAR II
07) PDMS
Computer Knowledge
Knowledge of Basic, Windows XP, Windows 2007,
AUTO CAD -2007 Version
MS-Project
Seminar/Training Attended
01) Anti-corrosive lining & Composites
02) Personality Development
03) Condition Monitoring
04) First Aid Training from Civil Defense Corporation.
Experience
Assistant Manager SI Group India Limited, Pali
From May 2008
It is a Petro-chemical, MNC company & is Certified by BVQI for ISO 9001,ISO 14001and ISO 18001 engaged in manufacturing of Nonyl phenol,Dodecyl Phenol. Raw material used- Phenol, DIB, Nonene
01) Responsible for man power handling
02) Preparation of Activity chart.
03) Detailing & Scheduling of Project activity –MS PROJECT
04) Implementation in ISO procedure.
05) Vendor evaluation.
06) Aspect & Hazard identification. & prevention.
07) Implementation of 5’S’
08) Prepare & check the P&ID,GAD & Isometric drawings.
08) Raise MTO & P.R
09) Responsible for errection of equipment & piping & safety precaution during the work.
10) Commissioning.
11) Have responsibility in MAP
12) Well familiar with safety work permit system
13) Participate in safety promotional activities
14) To carry shutdown jobs, Hydraulic testing of equipments.
15) Checking Dye Penetration tests.
16) Bills and measurement checking.
Nov-2005 to May-2008 SI Group India Limited, Pali
Officer Project
01) Prepared P&ID
02) Prepared Equipment Layout.
03) Prepared Isometric diagram.
04) Prepared Bill of Material & cost estimation.
05) Raised P.R
06) Man power handling
07) Responsible for errection of equipment & piping & safety precaution during the work.
08) Commissioning.
09) Have responsibility in MAP
10) Well familiar with safety work permit system
11) Participate in safety promotional activities
Project Handled-
01) STEAM GENERATION-Waste heat recovery from distillation column.
02) FLAKER-Flakes filling plant.
03) Tank farm errection- 100kl
04) Errection & commissioning of distillation column.
05) Water Management
06) Team member in Errection of 3 MW Power Plant
07) Team member in Errection of solid Fuel Boiler.
Dec -1999 to Nov-2005 Schenectady Hardillia Ltd.Pali
Production Officer
- Worked as production officer, responsible for DCS & field operation
- Handled unit operation like Distillation, Filtration, Drying etc, unit process like Friedel –craft reaction
- Worked in shift, responsible for production, Quality, yield, manpower handling & safety precaution during the work.
- Worked on Pressurized LPG reaction
- Trouble shooting of process problem, maintenance in regular manner, co-operates with project department for erecting equipment.
- Worked on atmospheric reaction
- Worked on vacuum distillation
- ISO 9001/14001/18001 procedures implementation
- Handled hazardous, toxic, flammable chemicals such as Phenol, Isobutylene, Styrene and Nonen.
- Responsible for man power handling
- Have responsibility in MAP
- Well familiar with safety work permit system
- Participate in safety promotional activities
ERP-ROSS Experience
Sept., 2006 till date Schenectady Hardillia Ltd.Pali.
- Create Various Code as per ISO procedure.
- Work Order Management.
- Project Planning And Processing.
Jan.-1997 to Dec. -1998 M/S- Nicholas Piramal Ltd Balkum THANE
Trainee Project Engineer
- Responsible for errection of piping.
- Responsible for man power handling
-
January 11th, 2012, 02:01 AM
Post Count Number #8
panel operator dcs TDC3000 and PKS C300 AND C200
SIR HATTABI MOHAMED
Email :hattabi57 AT yahoo.fr
JOB Tite :control panel operator DCS
JOB Description
Under direction of coordinator guidance controls somooth running conditions and optimises
Plant processes in his area by operating through DCS and directing external operators for external
Activities,following production plans operating and Q&HSE,procedures,and guarantee the assigned
Target of daily production
Tasks(activités)
Operation responsibilities :
-Gurarantee the respect of all production procedures and have the responsibility,in danger situation ,to start all safety and environmental activités ;
-Guarantee the montoring of instrumental level is correct,in according with definite value
-TO receiveinformation from the shift supervisor on operating paramerter values and to ensure they are continuousty respected
-To maintins continuos contact witz ôter operators (external or bocard) to solive Common opérationnel problems, such as product transfer, utilities load variation, etc ;
-To monitor all procèss condition through scanning of data by using the instrumentation located in the control room and to make ajustements as nécessaire to keep data within safe limits and within the established operating parameter values
-To notice any abnormal operating condition and to communicate with the external operator until normal running condition are set up
-Pprepare the daily report where is signed all the event happened in the plant
-Set and maintain a working environment that meets all safety and environmental standards
Method responsibilities :
-To inform the shift supervisor about work difficulties or plant emergencies and to receive instruction to overcome them ;
-Ensures the right function of assigned utility :
-Ensures good co-ordination of assigned team for the operations
Team management responsibilities :
-Organizes the assigned team ;
-evaluates and notes his personnel
-To assist the trainee operators whenever requested by the shift supervisor
-Assist in emergencies on the plant
Cerinte :
Observations on activités &Tasks
-Ability to decision making also in critic situation ;
-Ability to work under psychological pressure ;
-Ability to communicate effectively,both orally and in writing english
Required Qualifications&Background :
-12 years experience in other control panel room on gas installations :
-17 years experience on gas LNG and LPG installations(Gas plant)
-Ability to lead and motivate a multinational team and to manage heavy level of production
-Abilitiy to work independently and to maintain good relations with colleagues and others
-Physical ability to work on remote onshore installations under a hot and wet climate
-
May 9th, 2012, 07:23 PM
Post Count Number #9
ACCOUNTANT
I am working as an accountant in ebenzer st.thomas school. I completed B.COM UNDER THE CALICUT UNIVERSITY IN KERALA. I additionally studied adcfa(advanced diploma computerized financial accounting) which includes tally, peachtree, daceasy etc. I had one year experience in ebenzer st.thomas school. I have a good track record in auditing, book keeping. Further details may be presented by me at the time of interview
-
June 19th, 2012, 10:27 AM
Post Count Number #10
Instrument Supervisor ( Commissioning )with 11yrs experience in oil&gas field
CURRICULUM VITAE
Post Applied for : Instrument Supervisor
Name : Lad Hiteshkumar Maganlal
E-Mail Address : lad27 AT yahoo.co.in & hiteshlad27 AT gmail.com
Qualification : New S.S.C Passed from G.S.E.B., Gandhinagar
In the year of March-1997
: Passed Provisional National Trade Certificate in
Instrumentation July-1999
: Passed Provisional National Apprenticeship Certificate in
Instrumentation Dec. -2000
: Diploma Instrumentation Passed in 2011
Total Experience : 11 years , Gulf Experience 7 years
Training Course Attended : PTW System & H2S Training Course From RASGAS
: PTW System & H2S Training Course From GASCO
: PTW System & H2S Training Course From QATAR . PETROLEUM
Experience Detail : QATAR PETROLEUM GAS RECYCLING PLANT . ARAB “D” (Shut Down) Doha Qatar
:Working with BLACKCAT ENGINEER & CONS W.L.L
: Designation : Instrument Supervisor
: Duration : 08/02/2012 To 05/05/2012
: CAIRN ENERGY INDIA (Rajasthan Barmer)
: Working with: Aarvi Encon Pvt Ltd
: Designation: Instrument Supervisor
: Duration: 01/03/2011 To 31/12/2011
: KNPC MINA AHMADI REFINERY (SHUTDOWN)
KUWAIT
: Working with ALMEER TECHNICAL SERVICES CO
: Designation : Instrument Forman (PCI)
: Duration : 28/11/2010 To 27/12/2010
: ASAB GAS DEVLOPMENT PROJECT (AGD II)
Abu Dhabi
: Working with BECHTEL
: Designation :Sr. Instrument Technician (Commissioning)
: Duration : 29/12/2009 To 24/06/2010
: RASGAS COP ONSHOR PROJECT. Doha Qatar
: Working with Qatar Kentz
: Designation : Instrument Technician
: Duration : 15/12/2007 To 31/07/2009
: Dolphin Project, Doha, Qatar
: Working with Qatar Kentz
: Designation : Instrument Technician
: Duration : 17/10/2006 To 14/12/2007
: RASGAS LNG EXPANTION PROJECT. Doha Qatar
: Working with CCIC.
: Designation : Instrument Technician
: Duration : 15/01/2003 To 05/10/2005
: EQUATE PETROCHEMICAL (SHUT DOWN)
KUWAIT
: Working with Kharafi National
: Designation : Instrument Technician
: Duration : 04/03/06 To 19/04/06
: VIJHA ELECTRONICS LTD
: Designation : Instrument Technician
: Duration : 23/11/2000 To 11/01/2003
: Jaysynth Dyestuff (India) Ltd.
: Designation : Asst. Instrument Technician
: Duration : 15/10/1999 To 14/01/2000
Job Profile : Through out of my Professional Career I have been
associated in all aspect of Pre-Commissioning and
Commissioning . Maintenance of process control . Instrument with both PNEUMATIC & ELECTRONIC.
This Includes : Installation ,commissioning & start-up, maintenance,
Calibration, Trouble shooting and repairs, panel and
junction box wiring, Loop checking.
Instrument Handled :
- Yokogawa, rose mount fisher smart series transmitters (vortex , level , flow , pressure & temperature) with hart protocol communicator.
- Neles James bury , fisher rose mount smart type ( DVC 6010) control valves , shut down valves of biffi Adams & Neles James bury.
- MOV ( Rotork Controls ) Pacscan master station. ENDRUS & HAUSER –ULTRASONIC Leveltransmitters. Displacer type leveltroll by TOLYOKEISO. Electromagnetic flow-miter & magnetrol.
- FOXBORO I/A series version VI, Triconex ( TMR ).
- Power generation – general electric gas turbine control system. GE speedtronic mark-6 & steam boiler (MACHI)
- Process compressors (MR & PROPANE) CCC anti surge controls, Vibration monitoring system-Bentley Nevada (3300 & 3500) Bentley Nevada tend master 2000 serial communication , loop checking , commissioning, function check and start up activities of both the compressors.
- PH Meter, conductivy Meter work in ETP PLANT.
Fire and gas Triconex System.
Infrared gas detector system. Optima plus (sieger)
open path flammable gas detector sieger.
I have got the work experience in various plant like Petrochemical & Gas plant.
I have worked on various type of pneumatic , electronic , microprocessor based instruments like smart transmitters ( Honeywell , Rose mount , Yokogawa) and vibration monitoring system based rotating equipment like Bentley Nevada (3300 &3500 & trend master ) Speedtronic , Mark –6 Systems.
I have familiar with the latest process control Technology like TDC 3000, Foxboro I/A series Yokogawa Centum CS , Triconex (TMR) PLC for safe guarding system (HONEYWELL).
Have knowledge of P & I diagram , Logic diagram , Loop Schematics , Loop wiring diagrams , Ladder diagram etc.
Responsibility Taken :
Handle independently loop checking commissioning Start
Up. If any major problems comes try to solve the
problem as soon as possible and minimize the down time.
Very helping nature to every one and made the friendly relation with everyone. So good communicator with team ( working person ), senior , process department and other associated Department.
Date : 19/06/12 Yours Faithfully
( HITESH M. LAD)
-
July 2nd, 2014, 12:24 AM
Post Count Number #11
I want ro technician jobs
I am now plant technician 12 years experience in gulf countries.