BITS Pilani Dubai : Electrical Electronics Engineer / Electronics Instrumentation Engineer

[Admin]

BITS, Pilani – Dubai, located at Dubai International Academic City, Dubai, requires the following

Technical Assistants - Electrical & Electronics Engg / Electronics & Instrumentation Engg (Male)
Candidates with 3-year Polytechnic Diploma in relevant discipline with 3 years experience in labs of reputed Universities / Engineering Colleges / related industry, only may apply.

Manager / Senior Executive – IT Services (Male)

Candidates with Masters degree in Computer Science / Engineering, with 8-10 years experience in IT management may apply. Candidates with MCSE / CCNA will be preferred. The applicant should have a sound knowledge in IT management in a large organization The candidates should have proven experience in designing solutions using the latest technology relevant to the organization including security and disaster recovery procedures. Candidates should have ability to maintain unified communication systems and train sub-ordinate IT staff on various technology solutions and systems for their upkeep and fault free operations. Selected candidates will be responsible for management and development of the entire IT infrastructure of the institution.

Executives / Assistants - Finance & Accounts (Male)
Candidates with first class in both B.Com and M.Com having 3-5 years experience in reputed organizations / institutions, possessing excellent English communications and Computer skills may apply. Candidates should have experience in BRS, Inter-Division reconciliation, preparation of MIS reports and should be able to individually prepare balance sheet. Fresh M.Com first class graduates will be considered for Accounts Assistant position.

Manager / Executives / Assistants – HR (Male)
Candidates with Masters in HR / Personnel Management / Social Work, having 5-10 years of experience in reputed educational institutions, possessing excellent English communications (both oral and written) and Computer skills may apply. Candidates would be responsible for all aspects of HR functions – recruitment, induction, development, performance management, salary and benefits etc. Fresh Masters in HR will be considered for HR Assistant position.

Senior Secretaries / Secretaries (Male)
Graduates with excellent computer literacy and English communication skills with Typewriting and Shorthand qualifications, with minimum 3-5 years of experiences in reputed organizations may apply.

Administrative Assistants (Male)
First class Graduates with atleast 2 years experience in reputed business / educational institutions only may apply. High level of computer literacy is required.
• Candidates should have excellent communication skills in English
Applicants fulfilling the above requirements are invited to email their detailed curriculum vitae to:

The HR Department, BITS, Pilani – Dubai, Email: hrd@bitsdubai.com

http://www.bitsdubai.com

[Guest]

Curriculum Vitae
Gaurav Kothari
Instrumentation Engineer
Email ID : kotharigs AT yahoo.com

Objective:
To utilize my strength, knowledge, skills and previous professional experience efficiently in a challenging and growth oriented environment with company’s objective. I could devote all my efficiency for the welfare & growth of the organization.

Academic Qualifications:
- Master of Engineering from M.B.M Government Engg. College, Rajasthan, India with 70 % marks.
- Bachelor of Engineering from SRTM University, Nanded, Maharashtra, India with 75 % marks.

Computer knowledge :
- Computer Fundamental
- Microsoft Windows- 98.Xp.Vista.7 ,Ms – Office, Access, Word, Excel
- Internet, HTML
- C, C++, Java

Work Experience :
Client : SABIC - Saudi Kayan Phenolics Project, Jubail, KSA
Position : Instrumentation Engineer
Company : Tecnicas Reunidas Group
Duration : December-2009 to Till Today
Client : Saudi Aramco - Hawiyah Gas Plant, Hawiyah, KSA
Position : Instrumentation Engineer
Company : Tecnicas Reunidas Group
Duration : August -2008 to October-2009
Duties and Responsibilities
- Knowledge of Micro-Station.
- Knowledge of FF, prepared the Segment Diagnosis Report by using FBT-6.
- Supervision of Instrumentation construction activities for Sulfur Recovery Unit after successful completion of Dehydration & Dew point unit, Gas Treating unit, Thermal Oxidizer unit, Sour Water Stripper & Sales Gas unit.
- Study of all kind of instrumentation drawings like P & ID, Instrument Loop Drawings, Hookup Drawings, Cable & Conduit Schedule, Wiring Diagrams, Interconnection Drawings and Vendor Drawings.
- Checking the installation of conduits, Junction Box, Impulse line, Air line and grounding of instruments, junction Box and Local control panels as per requirement and standards.
- Installation of Control Valve like Flow, Level, Temperature, Emergency shutdown, Deluge Valve and Motor operated Valve.
- Working in the Analyzer system for Gas Chromatograph, Oxygen analyzer, H2S analyzer, LEL analyzer.
- Ensure the installation of Instruments like Transmitters, Pressure Gauge, Thermo well, Temperature element (RTD and Thermocouple), Temperature indicator, Vibration element (Accelero and Velo meter), Gauge Glass and Control Valve.
- Checking of process line and Instrument Tapping point to confirm the location of Instruments Transmitter and impulse tubing.
- Loop checking between instrument and DCS.
- Knowledge of DCS Yokogawa CS-3000.
- Work with Steam turbine, Compressor and Air blower vendor to check all the connection of speed sensor, vibration element, RTD, local indicator like temperature and pressure and transmitter.
- Study of P&ID and instrument specification sheet (Data Sheet) to confirm the range and operating condition of the instruments.
- Providing the necessary engineering documents and drawings to subcontractor and Red lining of drawings as per modification at site, and requirement of Operation.
- Rectify of MCC and all punch list items, which is issued by operation & client
- Coordination with client (Saudi Aramco) and Subcontractor (Sinopec) to resolve the problem regarding construction issues and maintain the progress.
- Technical review for loop packages and segment packages.
- Red lining of drawing and modify in the Loop folder drawings as per modification at the site.
- Supporting for the preparation of loop package, providing the necessary engineering documents and drawings to ensure the loop folder in compliance with the standards & procedure.

Company : Powerica Limited, Kota
Position : Instrumentation Engineer
Duration : September -2003 to July– 05
Duties and Responsibilities
- Calibration of instruments as per field parameters using HART communicator.
- Preparation of Phenolic tag for Distributed Control System and Emergency Shutdown System.
- Installation, measuring & calibration of measuring instruments like pressure guage, flow meter, strain guage etc.
- Installation & supervising of various control valves like globe valve, butterfly valve, plug valve etc.
- Simulation & testing of PID Controller for control of process parameters like temperature, flow, pressure, level.
- To inspect different displays, indicators, recorders, storage devices and alarm annunciator on control panel as per their position.
- Programmed of 8085, 8086 microprocessor
- To inspect different displays devices, indicators, recorders, storage devices & alarm annunciators on control panel as per their positions
- Programmed Allen Bradley PLC with ladder diagram.
- Design of DAS (single and multichannel).
- Attended weekly projects progress meeting and discuss about the ongoing projects.
- Testing of all protective devices like relays, Limit switches etc.
- Prepare daily, weekly, monthly progress report.

[Guest]

SANJAYKUMAR.K.C

E mail
sanjaykalapurakkal AT gmail.com
sanjaykalapurakkal AT yahoo.co.in


Career Objective
To work in a challenging environment where I can implement my skills. I want to see myself as a person rising in the field through hard work and continued enhancement of my knowledge and skills.
Work Experience [TOTAL 5.5 YEARS]
COMPANY : BHUSHAN STEEL LTD.ORISSA
DESIGNATION : SR. INSTRUMENT ENGINEER [AUTOMATION]
DURATION : SEPTEMBER 2010 TO TILL DATE
Activities involved : Process automation through plc programming in an
integrated environment
- PLC Specification and programming, including configuration of digital and analog I/O
- ALLEN – BRADLEY PLCs, including the SLC 500, controlLogix (Model- Contrologix 1756-L63) Systems under took diagnosing problems and trouble shooting of I/O processor, Communication processors, Main processors, Relay Module and Power Supply Modules etc.
- SCADA and HMI planning, configuration and programming with RSView32.
- PLC programming software, primarily RSLogix 500, RSLogix 5000 etc.
- SCADA design and configuration with RSView32, Factory Talk view Studio etc.
- Field installation and startup
COMPANY : BHUSHAN STEEL LTD.ORISSA
DESIGNATION : INSTRUMENT ENGINEER
DURATION : MARCH 2009 TO SEPTEMBER 2010
PROJECT : Blast Furnace of 1681 m3 designed by DANIEL CORUS with PAUL-
WURTH B.L.T System
Activities involved

- Erection of 2076 nos. instruments : Job includes tray erection, Junction Box mounting , cable laying, instruments mounting, termination & impulse tubing.
- Conversant with P& I diagram , Instrument Interconnection wiring diagrams, ILD,Control diagrams, Logic diagrams, schematic drawing flowcharts and local control panel drawing .
- Calibration Equipments used Dead Weight Tester, Druck Calibrator, Loop calibrator, Temp. Calibrator, Field communicators etc.
- Pneumatic and Electronic pressure Transmitter, DP transmitter.
- Level transmitters like, DP level transmitter, interface level transmitter, Ultrasonic level transmitter, Radar level transmitter.
- Flow transmitters like, Magnetic flow meters, Dopler and Transit time flow transmitters, Turbine flow meters.
- Temperature transmitter and Traducing instrument etc.
- Installation, commissioning, calibration maintenance of pneumatic and Electrical pressure switches, Temperature flow switches, level switches, Interface level switches.
- Installation ,commissioning ,calibration and maintenance of Pressure gauges, Pressure sensors ,Thermometers, RTD, thermocouple etc
- Installation, commissioning, calibration and maintenance of all types of control valves and shutdown valves.
- Servicing and maintenance of pneumatic and hydraulic valve actuators. Valve Bench set, lapping, seat changing, plug changing etc.
- Servicing and maintenance of Solenoid valves, I/P converters, SMART Positioner, Relays, Limit switches, Quick Exhaust, Booster lockup relay .
COMPANY : BHUSHAN STEEL LTD.ORISSA
DESIGNATION : ASST. ENGINEER [INSTRUMENTATION]
DURATION : JANUARY 2008 TO MARCH 2009
PROJECT : Blast Furnace of 1681 m3 designed by DANIEL CORUS with PAUL-
WURTH B.L.T System
Activities involved
- worked in a green field project of 27 MW turbo blower section in Blast Furnace of 1681 m3 with BLT charging system.
- Compressor (Made by S.B.W, china) is capable of producing 3.47 kg/cm2 (G) discharge pressure where the suction pressure is .094 Mpa . Turbine’s (Made by H.T.C, china) rated power is 8873 kW & the gear ratio is 1.83
- Installation, field calibration(by ROSEMOUNT 375 field communicator) & maintenance of Pressure Transmitters(ABB, ROSEMOUNT, YOKOGAWA make), Pressure Gauges, Flow transmitters…
- Vibration sensors & Vibration transmitters( BENTLY NEVADA make),
- RTDs, Thermocouple(K type & S type by TEMPSON ), Temperature Transmitters (YOKOGAWA ,ABB , ROSEMOUNT make) , Infrared Pyrometer
- Electro Hydraulic control valves, Pneumatic control valves(having SIEMENS electro pneumatic smart SIPART PS2 positioners),Hydraulic & Motorized valves
- Calibration, maintenance of ABB CO, CO2, O2, H2 (MODEL URAS 14, MAGNOS 106, CALDOS 17) gas analyzer systems.
COMPANY : IND TECH INSTRUMENTATION
DESIGNATION : SUPERVISOR [INSTRUMENTATION]
DURATION : DECEMBER 2005 TO JANUARY 2008
PROJECT : FCCU Expansion and Utility Boiler- Kochi Refinery
Activities involved : Erection supervision of instruments
- Job includes tray erection, junction box mounting, cable lying, instruments mounting and termination and impulse tubing.
- PLC Panel wiring
- Glanding and Termination of cables from Junction boxes and field instruments.
- Instrument tubing for1/4” 3/8” and ½” lines and conversant in different types of fitting.
- Instrument loop checking.
Professional Qualification
- B Tech. (A. M. I. E. T. E) From Institution of Electronics and Telecommunication Engineers.(2007)
Academic Qualification
- Pre Degree. From Calicut University.
- S.S.L.C from GVT of Kerala.
Other Certification
- Advance Diploma in Industrial Automation (2007)
- Diploma In Instrument Technology (2005)
Computer Proficiency
- Diploma in Computer Application (DCA)

[avinashtandekar]

AVINASH L. TANDEKAR
(B.E. ELECTRICAL ENGG. )

E : tandekaravinash AT yahoo.com
Career Objective
To persue a carrier in Electrical Engineering that utilizes my technical knowledge & relevant skills & aiming to constantly improve them credible interpersonal and communication skills.

Industrial Training

15 days training in T.P.S KORADI
-

Academic Qualification

B.E. (Electrical) :-First Class(60.69%)from SHRI RAMDEOBABA KAMLA
NEHRU COLLAGE OF ENGINERING NAGPUR (R.T.M.N.U) (2011).
Diploma (Electrical) :- First Class (64.92%) from Government Polytechnic
Gadchiroli Gadchiroli (MSBTE) (2007).
Higher Secondary School Certificate-12th (47.50%)(Science faculty) from
Maharashtra Vidyalya Khaperkheda (2003).
Secondary School Certificate – 10th First Class (66.53%) (2001) from
Maharashtra Vidyalya Khaperkheda (2001)

Academic Projects

B.E. :- To Plot Traction Characteristics of Induction Motor Using MATLAB.
By using MATLAB we are trying to change the speed v\s time curve
of an Induction Motor which is used in traction. BY implementing an
circuit using MATLAB and we develop that by varying the input voltage
the graph will change .

Diploma :- OZONE Gas Generator.
The OZONE GAS is mostly used for Water disinfection, Air
Purification, Mosquito repulsion .The generator is light to Wight
Easily move any were.
Strengths
- Possess strong commitment to team dynamics with the ability to contribute expertise and follow leadership directives at appropriate times
- A proactive planner with abilities to make effective presentations and to liaison with concerned individuals from different departments for task completion
- A versatile professional with strong focus towards delivering need based product solutions to clients through collective efforts backed by a positive attitude and a keenly analytical mind.
Additional Iformation
- Computer literacy :- Ms-CIT (89%),C-language (with certificate A )
- Personal interests include Cricket and listening to Rock music.
- Date of Birth – 24 Jan 1986; Gender – Male and Marital Status – Single.

[Unregistered]

TINKU KUSHWAHA
Email : kumartinku151 AT gmail.com

To work in a challenging and innovative environment where my knowledge and technical skills could be applied for the benefit of organization

ACADEMIC CREDENTIAL :
B.Tech Electronics & Communication from SHOBHIT UNIVERSITY,MEERUT(UP) 2012
12th MSDIC Sahjaur (deoria) 2005
10th HRHS Mairwa (siwan) 2003

TECHNICAL SKILLS :
OS : Windows Xp/2000/98
RDBMS : Ms Office.
Programming Language : C & P-Spice Simulation.
Internet : HTML, JavaScript.
Other : Internet, General PC Maintenance & Installation.

Automation Exposure gained at Sofcon India Pvt Ltd
PLCs : - Allen Bradley (Micrologix1000, Siemens-200,300 SLC 5/03), Basic Ladder & Logic Development
** PLC Wiring & Troubleshooting.
** Sourcing & sinking concept.
** Practical Knowledge of Basic Programming Instructions.

SCADA : - Wonder ware’s Intouch, RS View 32.
** Application Development.
** Communication with PLC.
** Communication with Excel.

Process Instrumentation : -Practical knowledge of RTDs PT 100, Thermocouples, Level Sensors, Pressure Sensors, Inductive / Capacitive Proximity Sensors, (PNP or NPN Type), Photo Electric Sensors, Relays, Contactors, Thermal overload Relays.

Motors/ Starters/ Control Circuits : Induction Motors, Torque/ Speed characteristics, Star Delta Starters, DOL Starters, Reversing starters, interlocking circuits, panel Wiring.

HMI (Panel View 300 Micro) :- Creating Applications, Downloading / Uploading Program, Communication with PLC HMI.

Drive :-
- VFD Principle of operation and applications.
- Operation and program parameters by keypad mode.
- Operation and program parameters by remote mode (start stop, potentiometer).
- Communication with PLC (wiring diagram) controlling with start stop.
- Communication with PLC and controlling with SCADA Software.
- Fault Finding / troubleshooting in AC drive.

INDUSTRIAL TRAININGS :
- “project based industrial training in networking” Noida in HPES(HP) Technology.
- Duration : 3 months
- Project Description :- IN the Training period, I made the “heart beat monitoring system” Using 8051 Microcontoller.

EXTRA CURRICULAR ACTIVITIES :
1. Seminar on “Electronics”.
2. Organized various cultural events at school and college.
3. Active participation in various sports like cricket.
4. Took part in quiz at college level.

STRENGTH :
My biggest strength is my strong determination and will power. I have a lot of zeal to learn new things. I believe in working honestly and sincerely. I remain calm and composed even in the most difficult situations .I believe that it’s better to do a thing than wish it to be done.

PERSONAL VITAE :
Date of Birth : 30-01-1987
Marital Status : Single
Language Know : English & Hindi