Electrical Engineer Jobs in Singapore : Griffin Technical Services

[muthukalee]

Griffin Technical Services Singapore : Senior Electrical Engineer

Company Name : Griffin Technical Services
Company Location : Singapore
Designation (of vacancy) : Senior Electrical Engineer
Company E-mail ID : info@griffintechnicalservices.com
Company Website : www.griffintechnicalservices.com

Job Description, Candidate Profile, Company Profile, Company Address :
Griffin Technical Services are currently looking for an experienced Senior Electrical Engineer to work for a major Oil & Gas company in Singapore based.

The ideal candidate will have the following :

- Degree/Master/PhD in Electrical Engineering from a reputed University

- Minimum 10 years of relevant experience in Extra High Voltage Tranmission, Power Generation.

- Electrical experience in Extra High Voltage Transmission, Power Generation engineering and system study.

•Remuneration : By negotiation
•Job Type : Permanent
•Locations : Singapore
•Industry : Power Generation
•Duration : Permanent

Contact us :
Griffin Technical Services Pte Ltd
7 Temasek Boulevard #14-02A
Suntec Tower One Singapore 038987
Tel : +65 6334-5122
Fax : +65 6338-5530

[Guest-IJT]

k n madhav reddy
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
kota.madhavreddy AT gmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
engineer(electrical)
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
RESUME
Mr.Kota Naga Madhav Reddy
OBJECTIVE
To secure challenging position in a progressive organization, where my technical skills can be enhanced and contribute to the organization success.
Qualification Board/University
College name Year of Passing Percentage
B.Tech
(E.E.E)

SREEKRISHNA DEVARAYA(S.K)
G.PULLA REDDY ENGINEERING COLLEGE
2011
73.4
Intermediate
INTERMEDIATE
BOARD
VIVEKANANDA JUNIOR COLLEGE
2007
92.4
10th standard
SSC BOARD
KESHAVA REDDY EM HIGH SCHOOL

2005
81.00
EDUCATION DETAILS
ACHIEVEMENTS

- Won Prizes in School Level Essay Writing Competitions.
- Participated as Volunteer in organizing the Technical Exhibition & science Fair in my college on occasion of SILVER JUBILEE CELEBRATIONS. .
- Secured a rank of 7626 in eamcet.
- Presented the paper on “Solar Power Satellite” in the Technical Fests organized by JAYAMUKHI and BITS colleges in Warangal.
- Secured winners position in the volleyball event organized by ABVP.
TECHNICAL SKILLS
- Favourite Subjects : Power Systems.
MY ABILITY
- Skills : Good Communicator &
Presenter, Team Worker.
PROJECT
MAIN PROJECT : Simulation of Bilateral Contracts in an AGC System After Restructuring.
DESCRIPTION : Restructuring means Privatization of Power.For restructuring three companies are needed namely DISCOM,TRANSCOM and GENCOM.In this a contract is done by a Disco company with a Genco company to generate the contracted amount of power. Contract is done with the help of DPM(disco participation matrix) under the aucillary service of AGC(automatic generation control).
USING : MATLAB.
CONCLUSION : The end consumer will receive power to a lower price than ever. The reliability and continuity of power wil be more efficient.
DECLARATION :

I here by declare that all the information furnished above is true and correct to the best of my knowledge.

DATE :
PLACE :
K.N.Madhav Reddy
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4106101
Date & Time : 8th May 2011 1:05 PM (UTC)
IP Address : 117.241.178.26
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1) Gecko/20090624 Firefox/3.5
Predicted Country : India

[Guest]

SANDEEP TUTEJA
stuteja03 AT gmail.com
OBJECTIVE
With extensive engineering skills and experience of Electrical Engineering, seeking a job position as Electrical engineer in a leading organization to achieve high level expertise to settle a long term career.
EDUCATION
GEORGE MASON UNIVERSITY (Graduation) VIRGINIA, FAIRFAX US
Master of Science (Electrical Engineering) August 2009 - May 2011
GPA 3.40

PDM COLLEGE of Engineering (Undergraduation)
(Maharishi Dayanand University) Haryana, India
Bachelor of Engineering (Instrumentation and Control Engineering) August 2002 - June 2006
Relevant Course Work
Digital integrated circuit, Physical VLSI Design, MOS Device Electronics, Introduction to Optical Electronics , Control and optimization, Discrete event Systems, Radio frequency Integrated Circuits, Smart power Grid, Internet protocols

Projects
Implemented schematic and layout of full adder using microwind.
Designed a Clock Distribution Diagram using Microwind and Pspice
Modeling and simulation of projects with Petri nets
Simulation of PID & control projects using MATLAB
DC Motor Speed Controller based on Pulse Width Modulation (PWM)

EXPERIENCE
Coperion Ideal Pvt Limited Noida India
Electrical & Instrumentation Engineer August 2004-July 2009
Projects
- PTA Conveying system for Polyplex Turkey
- Implemented the Batch process Programming by using load cell(Weight transmitter) of Nova Weigh.
- Engineering and procurement of all field instruments such as pressure Transmitters, Temperature Transmitter, Pressure & Temperature Gauges
- Designed and manufactured of PLC Panel using EPLAN software.
- Prepared General Arrangement drawing of PLC panel by using Auto CAD. Testing of PLC panel at our works and simulates it by writing PLC software.
- Finalizing the scope of supply for the enquiry from the customer by a detailed study of specifications from the consultants
- Prepared Electrical Loop drawing by using EPLAN
- Run PLC software for the complete system
- Commissioning of variable frequency drive of Siemens make at Siemens works place.
- Indian Oil Corporation Limited, India,
- Installation & Programming of PLC RS logix Allen Bradley make
- Learned & Implemented Smart Plant Instrumentation IN-TOOL software for the specification of Instruments and motors
- Commissioning of variable frequency drive of ABB make at ABB works place.
- Preparation of Quality assurance plan of each field instruments and motors, also takes the approval from EIL (Engineer India Limited) .
- Preparing Cable Schedule, Cable Tray layout, Junction Box Schedule, GA drawing of control Panels, Terminal Block details etc.
- Hook Up Drawing of all field Instruments using Smart Plant Instrumentation IN-Tools
- Preparation of Bill of Material of Hook Up using smart Plant Instrumentation IN-Tools
- Gas Authority India Limited, India
- Study of Piping and Instrumentation Diagram
- Commissioning of GAIL PATA Plant by performing input/output testing by communicating each instrument/Motor with PLC of each instrument & motor at site
- Development of Graphics of the complete plant using Winn CC software SCADA(Supervisory Control AND Data Acquisition
- Testing & commissioning of soft starter panel & VFD(variable Frequency drive panel
- Interfacing of PLC (programmable Logic Controller) with DCS (Distributed Control System),
- Communication of SCADA (Supervisory control And Acquisition with PLC and DCS.
- Writing of PLC software for the complete system

IT Skill
Auto Cad, MS Office, PSPICE , MICROWIND WinCC-5.0 , E-PLAN 5.6, C++, SQL, Smart Plant Instrumentation InTools, Windows Vista, XP, NT, 98, 95
SKILLS/INTEREST
Awards
- Joined as a Trainee Engineer in August 2006 ,Promoted as an Assistant Engineer April 2007
- Promoted as an Engineer in April 2008
Languages
- Fluent in English
- Fluent in Hindi
Sports
- Achievement Certificate for holding Ist position in Table Tennis
- Participation in Badminton inter College Championship

[Guest]

CURRICULUM VITAE
MOHAMMED KHALID
E-mail : extrahighvolt AT yahoo.com
er_S09 AT yahoo.com
CAREER OBJECTIVE
To secure a challenging and a responsible career as an Electrical Engineer in an organization of repute where I shall put all my analytical and technical knowledge and communication skills to work in an innovative way to accomplish the organization goals.
SKILLS AND ATTRIBUTES
- A skilled communicator with excellent presentation, negotiation and interpersonal skills.
- Ability to interact effectively with people at all levels using empathy, tact and diplomacy.
- Organised and methodical with good time management, prioritisation and planning.
- Ability to remain calm and focused under pressure and work within strict deadlines.
- Enthusiastic, highly motivated, flexible and adaptable individual.
- A committed team player, able to motivate and inspire others and work in a cohesive team.
EDUCATION AND QUALIFICATIONS

Bachelor of Technology in Electronics and communication Engineering 2002 -- 2006
MAULANA AZAD COLLEGE OF ENGINEERING AND TECHNOLOGY, PATNA
Higher Secondary (A Level equivalent) 2000 -- 2002
PRE GRADUATE IN SCIENCE, PHYSICS, CHEMISTRY AND MATH.
EMPLOYMENT HISTORY
TOTAL EXPERIENCE 4 Years (2 Years in GULF)
Site Electrical Engineer/Substation Engineer MAR 2009 ---- MAR 2011
QATAR POWER WLL (Energy Sector)
DOHA QATAR.
Major Projects :
1) GTC 226(Maintenance/upgrading of substation), CLIENT KAHRAMAA
2) Gtc 198 (Direct service work ) CLIENT KAHRAMAA
3) Gtc 212 (Cable extension work) CLIENT KAHRAMAA
4) SELF WORK (Supply to tower, Sheikh Palace, and so many)
Responsibilities :
- Preparation of site activity planning in the detailed project schedule.
- To review the approved drawings, planned activities and confirm the actual resources including the supervisors, workers, equipment, documentation, work method and sub contractors as applicable during the site planning stage.
- Daily and long term planning at site, coordination, control and efficient utilization of the required resources for all site activities.
- Supervise the foreman to ensure assign work to be completed according to the approved drawings.
- Coordination with QA/QC Engineer in receiving and inspection materials at site.
- Reconciliation of all mark up drawing needed for As-Built Drawings.
- Maintaining proper handling and storage of materials, tools, equipments etc at site.
. Assuring safety measure require for the project.
- Over all coordination with QA/QC Engineer, Project Engineer, other Engineers at site and sub-contractors for materials, equipments etc.
- Coordination with Testing & Commissioning Team and SEC witnessing Team to precede Testing & Commissioning as per planned schedule.
- Monitoring and control of the relevant company procedure to ensure that they are followed correctly. Rectify and implement any deficiencies reported through non conformance reports.
- Erection of Power Transformer up to 200 MVA along with latest Protection & Control system, utility, water supply system & motor control systems.
- Installation of internal & external lighting and lightning system.
- Cable laying HV, MV & LV.
- Clearing the Punch/Snag List with SEC after the work completion.
- Prepare the list of all Equipments Spare Parts (GIS, Power Transformer, Control & Protection Panels, and MV Switchgear etc.) to handover to SEC store after completion of Energization of the Substation.
UNICON INFRADEV ENGINEERING PVT LTD, Patna,
July 2007 – Feb. 2009
- Job Profile/Company Profile ELECTRICAL/INSTRUMENT. :
Operation & maintenance of plant equipments which includes 3-phase induction motors, voltage stabilizers, transformers, generators, circuit breaker, relays, welding machine and there control circuits.
Responsibilities :
- Our project was involved for installations of different instruments, Fixing of impulse line.
- Loop checking & commissioning.
- Repairs of faulty instruments and trouble shooting of instrumentation systems
- Operation of Yokogava DCS Console.
- Field calibration, testing of solenoid Valves, Overhauling of field equipments & Control valves.
- Calibration of all type of Gauges and Switches.
- Calibration of different type of pneumatic and electronic instruments.
- Field calibration of control valve, level troll and interface level troll.
- Pressure testing of impulse line, continuity check and inspection of instruments installation like PT, FT, LT, TT, PG, TG and control valve.
- Functional testing of all Instrument taking into consideration their interlocking and protection system involved in its operation
- Pre-loop Checking, final loop check and commissioning of the project.
- Pre-commissioning, Functional Simulation of Digital & Analog Logic, Process Controller Tuning, Input/output signal Verification & Simulation
Computer Skills & Electrical Software’s
- Operating Systems : Windows (98, 2000, XP, Vista & 7)
- Software : MS Office
- Programming skills : C & C++
- Electrical Software’s : Etap 5.5 & 6.0, Matlab Design, Math-Cad Design and Eracs.
- Completed a training course on Auto-Cad 2D and MEP.
Languages
- Proficient in English and Urdu (read, write and speak)
- Initial stage in Arabic
INTERESTS AND ACTIVITIES
At leisure, try to learn new skills (computer software, etc), play cricket, football and computer games. Love travelling, adventuring and have fascinating desire for hiking and field work.
REFERENCE
QATAR- A JABBAR AFRIDI, GRADE ‘A’ ELECTRICAL ENGINEER, UNICON LIMITED, MOB-00974-77071172
INDIA:- MR RASHID IQBAL, PROJECT MANAGER RELIANCE INFOCOM, BIHAR

[Guest]

Dear Sir,
I would like to apply for any suitable position in Electrical department in your organization.
Please find attached my profile and resume.
CURRICULAM VITE
Email : varadha2811 AT gmail.com
S.VARADHARAJAN
_____________________________________________________________________________________
Objective :
Looking for the challenging opportunity in your organization where I can serve in the organization with my innovative and skills.
Personal Skills :
Comprehensive problem solving abilities, excellent verbal and written communication
Skills, ability to deal with people diplomatically, willingness to lean, team facilitator.
Qualification :
- B.E in Electrical & Electronics Engineering (2007-2010) at Bhavendhar Bhardhidasan College of engineering, trichy with an aggregate of 67% in ANNA UNIVERSITY.
- Diploma in instrumentation & Control Engineering (2005-2007) at ADJ Dharmambal polytechnic college, Nagapattinam with an aggregate of 75% in STATE BOARD.
- +2 The Crescent Higher secondary school, Avaniapuram. With an aggregate of 73%
- S.S.L. C The Crescent Higher secondary school, Avaniapuram. With an aggregate of 67%
Computer skills :

Basic Knowledge of computer MS-office & AUTO CAD
Additional Qualification :

SPICE (School of professional Instrumentation and Control Engineering) in
YOKOGAWA INDIA LIMITED, BANGALOUR. At June 21 to July 30.
- Distributed Control System (Engineering & Maintenance of CENTUM CS3000R3),
- Programmable Logic Control (PROSAFE),
- SCADA (STARDOM) & Foundation Field Bus.

Area of Interest
- DCS, PLC, SCADA Engineering
- Power Electronics, Electrical Machine.
Experience summary :
- Currently I am working in HEMPOWERTECH INDUSTRIAL SOLUTIONS as Assistant Engineering in Maintenance Department
- From June 2008 to June2010 SAJAS ELECTRICAL as Electrical Equipments Assembly section at part time work.
Key Responsibilities in HEMPOWERTECH INDUSTIAL SOLUTIONS (CHLORAID ALLOY INDIA LTD)
- Operation and Maintenance of 1100Kva Transformer and maintenance,
- 625Kva,325Kva,63Kva generator operation and maintenance work,
- Maintenance of Main MV panel and capacitor bank panel,
- Maintenance of 250HP,60HP,15HP.5HP Drive program setting and control panel servicing,
- Maintenance of Instrumentation panels & power Distribution panels,
- Maintenance of Solenoid value and sequential timers program settings,
- Delta drives, kirsoker drive, Telemecanique drive program setting and servicing.

[varma132]

RAVI VARMA NAGARAJU
E-Mail :varma132132 AT gmail.com ~
Seeking entry level positions with a growth-oriented organization in the area of :
- Electrical engineer and power system engineer
- Electrical design engineer
Open to assignment with a construction industry or power plant or in the electrical manufacture industries .
Post-graduate degree in Electrical (power systems) from KL University with consistent academic record with zeal to learn new concepts quickly and apply innovative ideas for achievement results. Motivated, self-starter with a passion to succeed and desire to excel in the area of power sector. Completed training at Vizag Steel Plant. Visakhapatnam (Duration : 3 weeks) as a Trainee in Operation and control in Thermal Power plant (part fulfillment of B. Tech curriculum).Strong communication, Interpersonal, relationship and analytical skills.
- Master of Technology in Power Systems from KL University, Vijayawada, Andhra Pradesh, India in 2011 (secured 7.3cgpa).
- Bachelor of technology in electrical and electronics from Al-Ameer college of Engineering and Information Technology, JNTU Kakinada, Visakhapatnam, AP in 2009 (secured 2nd Division).
- Intermediate (Science stream with mathematics) from Chaitanya Junior college, Kakinada. In 2005(secured 69.40%).
- Class 10th from Timpany High School, Kakinada (SSC Board) in 2003 (secured 64.60%).
- Worked in thermal Power Plant Operation and Control and done a case study.
- Prepared an detail note on plant operation.
- Worked in Electrical design for commercial and residential projects up to 33kv voltage level.
- Prepared a design and draft in both paper and softcopy using AUTO CAD.
- Power Point Presentation on NANO TECHNOLOGY in VIDHUT 2K8.(2008),Vizag.
- Mini project – Load flow analysis of Radial distribution networks.(2008) .
- Main project –. Load Frequency Control for Interconnected Systems using Optimal Controller.(2009)
- Model presentation – Thermal Power plant(2009).
- Stood second in ESSAY writing competition on AIDS awareness.
- Participated in under 19 district level cricket competitions.
- Basic knowledge of M S Office Suite, Basis of Hardware and Internet Applications.

[Guest]

CURRICULAM VITAE

KARTHIKEYAN V

Mail id =karthik_modaliyar AT yahoo.co.in
Karthikv.mandya AT gmail.com

Carrier Objectives :
Looking forward for a challenging and significant career, to work in Professional Environment where I can enrich my Skills and work towards the Organizational Goals.

Strengths :
Effective communication skills and good analytical and decision making ability. Dedicated to professional and highly motivated towards target achievement. Having the ability to complete the given task. Positive attitude, Friendliness and Flexibility and achieve in success in job.
Educational Qualification :
- Completed Diploma in Electrical and Electronics Engineering from Bharathi Polytechnic College, K.M.Doodi.(73.76%)
- Completed N.T.C electrician in I.T.I at Govt industrial Training Institute, Mallavahalli. (72.28%)
- Completed N.A.T.S. in Electrician at R.P.G CABLES LIMITED, Mysore.(66.71%)
Field Skills :
- Maintenance and Services of Panel Board.
- Panel board assemblies & design
- Maintenance and services of L.T Lines.
- Excellent knowledge in Submersible and Open well Motor servicing.
- Excellent knowledge in switchgear and starter servicing
- Bus bar working upto(100*10)
Additionals Skills :
- AUTOMATION trained in SMEC AUTOMATION PVT. LTD
This training includes PLC , SCADA , HMI , VFD , PAC ,
CONTROL PANEL WIRING & DESIGN,LEVEL3 FIELD INSTRUMENTS
- WIREMAN LICENCE.(reg no=30455)
- WIREMAN SUPERVISER LICENCE.(reg no=s28040)

Computer Skills :
- Basic Computer knowledge with MS office
- Basic Knowledge in computer Troubleshooting
Career profile :
- Worked as Electrical technician in K.H.Shoees ltd. During Dec 1999 to Oct 2000 at TAMILNADU
- Worked as electrician in BACCA Leather Exports during augst 2001 to nov 2002 at TAMILNADU
- Worked as electrician in RPG Cables LTD during feb to dec 2005 at Mysore
- Worked as industrialElectrician in NATIONAL ELECTRICAL COMPANY at SULTANATE OF OMAN during jan2006 to mar2008
Hobbies :
- Watching Movies , Listening music,
Playing cricket, watching cricket

[Guest]

I am unni from kerala.I am study degree and instrumentation course.

[er.lokesh]

info about post?

[Guest]

RESUME
SUBIN.KOCHUMMEN
Email :subins2 AT gmail.com

:: CAREER OBJECTIVE
I would like to use my acquired professional education and knowledge for the engineering activities and development, thus develop personnel skill with an opportunity to improve on the same, and contribute to the growth of the firm in every way I can.
:: ACADEMIC CREDENTIALS
Secondary
Higher Secondary S.S.L.C from Mount Carmel English Medium Higher secondary School ,Kollam , in the year 2004. Passed with 87.5%.

XIIth from S.N.S.M.Higher secondary,Kollam during the year 2004-2006.Passed with 88%. Kerala State Board Exam
Kerala State Board Exam
Professional
B-Tech – Electrical & Electronics Engineering at
BM II College of Engineering ,Kerala
Course Year 2006 – 2010.Passed with 60%.
University of Kerala
Technical Certified Automation Engineer Programme at SMECAutomation, anISO 9001 :2008 global solution provider and the Authorized System Integrator of Schneider Electric, France

Technical Autocad (electrical) from G-TEC Computer Education, ISO 9001 :2008 certified registered with ministry of education, Singapore.

:: PERSONNEL INFORMATION
Date of birth : 06.06.1988
Marital status : Single
Languages Known : English, Hindi, Tamil and Malayalam
Nationality : Indian
:: ACADEMIC HIGHLIGHTS
- Acquired detailed knowledge in electrical and related subjects and have visited and analysed many industrial projects regarding this.
- Researched and recommended design strategy in highrise building as part of the academic program.
:: WORK EXPERIANCE
- Electrical Site Engineer :Jan- Oct 2011, Nine Architects Kollam,Kerala, India.
- Electro-Mechanical Engineer : Nov 2011 to present, Sora Engineering ,Doha Qatar.
Now working in their project with Megatec Electro mechanical Engineering as Site Engineer at Pearl Qatar, tower VB-05,for Electrical trunking ,wiring and HVAC ducting for the whole tower.
:: TRAINING EXPERIENCE
- Participated in training program at Thenmala Substation, Kollam, Kerala.
- Participated in training program at Hydro Electrical Power Station, Idukki, Kerala.
- Completed Industrial Training in KEL ,Kollam, Kerala.
- Attended the training sessions of Marine & Industrial Automation under the guidance of SMEC Labs Pvt.Ltd.Kochi.
- Worked as an BMS trainee in Etisalat DB at Banglore.
:: EXTRA TECHNICAL SKILLS
- Prepare electrical drawings and specifications.
- Manage project schedules and budgets, and obtain permits for operations.
- Estimate engineering calculations in connection with field and office assignments.
- Investigate problems and recommend solutions.
- Maintained effective working relationships with field crews, contractors, vendors, outside agencies, the public and city staff members.
- Automation and control system development, Various PLC’s and PAC Programming, HMI and SCADA configuration, Knowledge about PAC, VFD.

[Guest]

My education level is diploma in electrical engineering. Due to financial problem, i didn't continue my education further. so,i want to apply for a job. please understand my problem.

[Guest]

P.Sudhakar
E-mail : sr_rs2011 AT yahoo.com
srrs2011 AT gmail.com
Work Experience
3+ Years experience in electrical installation, electrical maintenance, electrical testing, site supervisor, production supervisor, project co-ordinate, Quality and utilities checking.
Education
BE-Electrical and Electronics Engineering in Shri Andal Alagar College of Engineering in chengalpatu and passed out in June 2009 with a score of (CGPA-7.60 out of 10)
Diploma in Electrical and Electronics Engineering in Sri Balaji Polytechnic college at vandalure and passed out in April 2006 with a score of 76%
SSLC in Government Higher Sec School at Madampakkam and passed Out in Mar 2003 with a score of 75%
Skill-sets / Tools
Platforms : Basic AUTO CAD, Basic PLC
Languages : MS Office, MS Outlook and C, Windows 98,2000
Application : Basic Hardware and Software
Core Competencies
Electrical switchyard control and monitoring (HT, LT).
Installing electrical switchgear equipment & soft starters.
LT panel erection & commissioning.
Electrical preventive maintenance for all plants.
Knowledge in electrical, mechanical, plumbing,constration and HVAC (heating, ventilating, air conditioning) systems.
Knowledge of motors, starters, generator, power systems, compressor & DG set.
Administration knowledge in prepare and update all quality documentation including control plans, process flow diagrams, work instructions, quality reports, rework procedures, etc...
Administration knowledge in Negotiations and communication on projects and annual maintenance cost

Work-Experience
Working as a Engineering Executive and Project Co-Ordinate in GRT Groups of Hotels and Resorts in GRT GRAND / Kanchipuram / Vellore from june'10 till now.
Working as a Electrical Supervisor in Kilburn Power Gear Limited in Chennai from Jun'09 to May'10.
Strengths
Hard working, Quick-learning capabilities
Quality awareness
Time Management and good planner
Ability to adopt to new atmosphere
Capability to move between the processes
Ability to mingle with people of any character
Excellent team player and a good organizer
Details
ACHIEVEMENTS :
Appreciated for the best project in final year
Took part in athletic events and won prizes at school and college leve
Conduct trainings for Operators and Apprentice in regular basis.
Organization : GRTGrand/ GRT Regency Kanchipuram/Vellore
Environment : Engineering Executive & Project co-ordinate
Responsibilities :
Handling Electrical preventive maintenance for all plants.
Handling Electrical switchyard control and monitoring (HT, LT).
Maintaining EB consumption and repair & maintenance cost under the budget.
Monitoring and maintenance transformers & distributions.
Monitoring productivity improvements and internal scrap reduction.
Inspection on receiving new materials and ensure product quality.
Provide solutions to a wide range of technical problems through the application of standard engineering policies and procedures.
Conduct day to day operation of various electrical, mechanical, plumbing and HVAC (Heating, Ventilating, Air Conditioning) systems.
Maintain all equipment and systems functioning to its optimum benefit.
Analyzing warranty returns and makes recommendation to control the fix issues.
Ability to be a clear thinker in pressure situations and exercise good judgments.
Strong leadership and team player with good interpersonal relationship
Read and understand blueprints, schematic drawings, and technical parts breakdown
Understand and operate advance electrical, plumbing, refrigeration, and boiler.
Overall control and maintenance of BMS 4x 425Tr chillers, primary secondary pumps, 15HP compressors, split AC, VFD, AHUs & FCUs, Boilers, laundry equipments, slow speed elevators, escalators, automatic sliding doors, Fire Hydrants, smoke detectors, sewage treatment plant, Fire Hydrant and Fire pump, Fire extinguisher, smoke detector, heat detector, PA system, MCP, telephone jacks.
Monitoring and maintenance electrical panel room 11 KV, softener plant 1500 LPH, boiler plant 500 KG, RO plant 1500 LPH, WTP, DG plant 725 KVA and Chiller plant 500 TR Capacity.
Maintenance of uninterrupted power supply(UPS), to the testing stations, engineering labs and computers all over the facility, (220Kva,160Kva, 120Kva, 60Kva, 10Kva)
Testing of cooler for HV, Insulation resistance, ECR, Leak testing also carried out for Halogen leak detector for R134a gas.
Knowledge in prepare and update all quality documentation including control plans, process flow diagrams, work instructions, quality reports, rework procedures, etc...
Knowledge of motors, starters, generator, power systems, compressor & DG set.
Organization : Kilburn Power Gear Limited Chennai.
Environment : Electrical Supervisor.
Responsibilities :
Testing & Analysis (endurance & performance test).
Power transformer & distribution transformer testing.
110/33-11 KV transformer maintenance.
LT panel erection & commissioning.
Circuit breaker operation & maintenance.
Execute standard operating procedures developed by engineering department
Execute policy and procedures for engineering practice developed by
engineering department
Conduct inventory of material and spare parts used within the process of maintenance.
Participate in departmental meetings, seminars, training etc.
Fault analysis and load flow management.
HT and LT motor testing and maintenance.
Maintain receiving and inspection on supplied parts to ensure part quality.
Knowledge about electrical switchgear equipment & soft starters.
Knowledge about Star – Delta and DOL starter.
Knowledge of production, maintenance & utilities and quality.
EXTRA-CURRICULAR ACTIVITIES
Actively taken part in other colleges’ symposiums and presented papers.
Arranged industrial visits and educational tour as an organizer.
Did projects for college science expo.
Undergone in plant training in the MADURAI POWER CORPORATION, MADURAI (TNEB).
Undergone in plant training in the MASTER INDUSTRIES, TRICHY.
Have gone to SCADA (Anna Salai), Sharp Motors (Coimbatore), and Thermal Power plant (Ennore) as a part of Industrial Visit.
RESPONSIBILITIES
Being the blood donation camp representative for two years in college.
Being the leadership for two years in Rotary Club Boys Town.
PROJEC WORK
Done UG project in BHARAT HEAVY ELECTRICAL LIMITED TRICHY. Title “PLC BASED AUTOMATIC CHANGE OVER EB SUPPLY TO GENERATOR SUPPLY”.
DECLARATION :
I hereby declare that the above statements are true & Confident
DATE :
PLACE : (P.SUDHAKAR)