Welding / NDT Inspector / QA QC, Painting Inspector : Resume CV

[rgk1975]

CURRICULUM VITAE :
RAJA GOPALA KRISHNAN.J
Email : - sriram26021975 AT rediffmail.com

OBJECTIVES :
To Work with dynamic and creative for organization where I could share my skills and capabilities in challenging position of responsibility that would stimulate and give me an opportunity to work in your esteemed organization.

PROFILE :
Total 13 Years & 11 Months Experience
- 8 Years and 10 Months of experience as Welding / NDT Inspector / Mechanical QC Inspector / Painting Inspector in esteemed organizations in UAE, Saudi Arabia and India.
- 3 Years and 6 Months in Injection Molding Field as Plant Engineer for Material and Maintenance in India
- 1 Year and 7 Months in Electrical Field as Site Engineer in India

PROFESSIONAL EXPERIENCE :(8 YEARS AND 10 MONTHS)
Experience in QC Mechanical Inspector, Plant piping, Cross Country Pipelines, Pressure Vessel Structural activities like offshore hook up, Oil Platform, Deck Erection, structural steel work and NDT inspections. Also having experience in painting inspection and having knowledge of ISO 9001 – 2008.

ACADEMIC & PROFESSIONAL QUALIFICATION :
- Diploma in Electrical & Electronics Engineering
- From Elumalai Polytechnic - Board of Technical Education, Tamil Nadu - May 1996
- Certified Welding Inspector (AWS – CWI Certificate No : 04010741)
- Certification Scheme for Welding & Inspection Personnel (CSWIP – 3.1,certificate No : 24321)
- Saudi ARAMCO Approved both for Welding & Painting - (SAP # 70009454)
- Radiographic Interpretation – Level II of SNT / TC/ 1A – 1996 / 2001
- NACE Coating Inspector Level 1 - Certificate Number : 21795

TRAINING COURSES ATTENDED :
-One week training on Material and Welding inspection conducted by AWS-Industrial Quality Concepts Chennai in Preparation for AWS – CWI Examination.
- Four days training on Radiographic Film Interpretation & Evaluation conducted by Industrial Quality Concepts Chennai.
- Sea Survival Training conducted by Emirates Technical & Safety Development Center (ETSDC) – Abu Dhabi
- Basic Fire Fighting System Conducted by Emirates Technical & Safety Development Center (ETSDC) – Abu Dhabi
- HSE Induction & Hydrogen Sulphide Training by Safety Technical Service Co. Ltd., - Oman
- Lead Audit Course attended at Lloyds Register

SUMMARY OF EXPERIENCE :
- May 2010 to Aug 2010 : M/s. Lindinger Inspection Services - UAE
Worked as a QA/QC Inspector Welding / Painting :
Project Handled :
- SAUDI ARAMCO – KARAN Offshore Platforms And Subsea Pipelines Project
(Karan TP1 Jacket, Karan Helideck of TP 1, Aux 6-9/16, Aux 17/25, Karan Aux Cellar Deck 17/25, Karan WHP Cellar Deck of 17/25, Karan WHP Cellar Deck of 26/34, Karan WHP Lower Mezz Deck of 26/34 ) in J.Ray McDermott – Dubai
Job Responsibilities :
- Inspection of structural for deck & Jacket are carried out as per Aramco Standard.
- Monitoring the material during fabrication, Inspection of Fit-ups as per aramco standard.
- Monitoring of Welding Parameters, Inspection of welding and arrangement for NDT as per aramco standard.

- Nov 2009 to Dec 2009 : M/s. Energy Engineering Consultant- UAE
Worked as a Senior Quality Engineer for Some TPI projects for local and international clients.
Project Handled :
- Endurance Jack-up barge in Gulf Marine Service – Abu Dhabi
Job Responsibilities :
- Inspection of painting and monitoring the painting process to achieve the required Project Specification Quality.
- Inspection of structural, piping & equipment

- Aug 2007 to Oct 2009 : M/s. SGS Gulf Ltd., UAE
Worked as a QA/QC inspector :for various TPI projects for local and international clients. QC inspector for onshore and offshore. Assignments involved third party inspection services and QA/QC inspection services on major steel fabrication projects, verifying welder qualification tests.
Job Responsibilities :
- Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Project Specification requirements and identify nonconforming materials and preparation of necessary NCRs.
- Inspection of Valves and Fittings during installation
Project Handled :
- ARAMCO – SFNY 920, 960, 970, 980, 990 & BRRI 420 in J.Ray McDermott – Dubai
Job Responsibilities :
- Inspection are carried out as per Aramco Standard
- Monitoring of material traceability as required during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of welding and arrangement for NDT as required
- Flange Management carried out as per Aramco Standard.
- Inspection of Protecting Coating Materials to make sure the compliance with Project Specification.
- Review of painting specifications, blasting and painting procedures, materials receipt inspection and verification.
- Inspection / Supervision of surface preparation and painting works of piping systems
- Conversant with inspection techniques such as surface cleanliness/profile check, chloride test, WFT & DFT Checks, Adhesion test, MEK Test, Holiday detection etc... As per the industry standards.
- Identifying coating defects during and after application of coating systems
- Following specific duties such as recording weather conditions & substrate temperature by using Whirling hygrometer, dew point & RH % slide calculator and steel temperature gauge.
- Prepare and monitor punch list items, ensuring they are being resolved according to the turn over system.
- Getting release note from the client at every stage.
- MEARSK Oil Qatar – AS-CD ( Wellhead Module CD, Al Shaheen Development) in J.Ray McDermott - Dubai
Job Responsibilities :
- Re-instatement of the pipe spool
- Generating and Preparing punch List.
- Clearing of the punch items
- PROJ.2308-SINGAPORE NExBTL PLANT [NESTE OIL] in William Hare – Abu Dhabi

Worked as a third party inspector deputation to Neste Oil company – Singapore through Technip – Italy.
Job Responsibilities :
- Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Project Specification requirements, assisting the Stores to identify nonconforming materials and preparation of necessary NCRs.
- Witness the Material Testing according to EN 10025 in Body Coat Testing Laboratory – Abu Dhabi
- Monitoring the material during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters and Inspection of all finished welds and review and measuring the final dimensions.
- Witnessed Galvanization of the material as per BS EN ISO 1461 :1999
- Reviewed documents related to the project.
- SNC LAVALIN INTERNATIONAL of BeAAT Project for TAKREER – Ruwais
Job Responsibilities :
- Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrangement for NDT as required.
- Interpretation of Radiograph film
- Test Pack preparation for Pipes Line
- Reviewed and Witnessed Hydro Test of the Pipe Spool as per Project Specification
- Inspection of surface preparation for fabricated structure & Pipe Spool before painting
- Inspection of painting and monitoring the painting process to achieve the required Project Specification Quality.
- Monitoring of environmental conditions.
- Checking of painting process from surface preparation to Top Coat Stage.
- Checking of Profile, WFT, DFT, adhesion & Holiday Test as per the specification.
- Getting release note from the client at every stage.
- Inspection of installation equipment.
- Inspection for alignment of Rotary and Static Equipments.
- Reliance Project of KGD6 Control & Riser Platform in J.Ray McDermott - Dubai
Job Responsibilities :
- Inspection are carried out as per ASME B31.3, AWS D1.1, API 1104 etc
- Monitoring of material traceability as required during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of welding and arrangement for NDT as required.
- Review and Witness of Hydro Testing for the Pipe Spool
- Re-instatement carried out for the test packs as per client requirements.

- May 2007 to Jul 2007 : M/s. Cutech Solutions and Services Pte Ltd., Singapore
Worked as a QA/QC inspector :for various TPI projects for local and international clients. Assignments involved third party inspection services and QA/QC inspection services on major steel fabrication projects, verifying welder qualification tests.
Job Responsibilities :
- For ONGC project as a third party inspector for BVQI for material inspection in Hup Steel & Regency steel in Singapore for PT Sempec Indonesia.
- For Maari Field Development Wellhead Jacket Erection project as a Client Inspector of PV for Clough in Asia Offshore services for Corbel Structural.
- Aug 2005 to Apr 2007 : M/s. SGS Gulf Ltd., UAE
- Worked as a QA/QC inspector for various TPI projects for local and international clients. QC inspector for onshore and offshore. Assignments involved third party inspection services and QA/QC inspection services on major steel fabrication projects, verifying welder qualification tests.
Job Responsibilities :
- Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Project Specification requirements and identify nonconforming materials and preparation of necessary NCRs.
- Inspection of Valves and Fittings during installation
Project Handled in U.A.E :
- SNC LAVALIN INTERNATIONAL of Dubal (Dubai Aluminum) Project - Dubai
Job Responsibilities :
- Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrangement for NDT as required.
- Interpretation of Radiograph film
- Test Pack preparation for Pipes Line
- Reviewed and Witnessed Hydro Test of the Pipe Spool as per Project Specification
- Highisland IV Jackup Rig of Globalsantafe in Lambrell - Sharjah- U.A.E
- Transocean of C.KIRK RHEIN JR RIG in Lambrell - Sharjah-U.A.E.

Worked as a Client inspector deputation to Golbalsantafe and Transocean of C.Kirk Rhein Rig.
Job Responsibilities :
- Front Line inspection of rig refurbishment and design change work which include inspection welding, dimensional, monitoring of NDT, cantilever, high and low pressure pipe, skid, hulk, blasting tank, accommodation, module and sputgan.
- Review and approval ITP as per code and client required.
- Monitor of NDT activities.
- Witness of Hydro test.
- Perform line / tank check, punch list involved hydro test and re-instatement activities.
- Involved in activities relating to mechanical completion.
- Review of WPS, PQR and WQT as per contractual Procedure.
- Involving in painting inspection.
- OXY, QATAR - Qatar project for hook-up and tie-in spool in Offshore by NPCC - Abu Dhabi
Job Responsibilities :
- Inspection are carried out as per ASME B31.3, AWS D1.1, API 1104 etc
- Witnessing of WPS, PQR, WPQ qualification test as per Project Specification.
- Inspection of fit-up of pipe spool and piles.
- Monitoring welding parameters, inspection of welds.
- NDT reports and radiographs and prepare necessary data books for the completed items.
- Inspection of Film Wrapping in the welded joints for the tie in spool.

- July 2004 to June 2005 : M/s. Abdullah – H Al Shuwayer Group Damam, KSA
Worked as QC Inspector :
Job Responsibility :
- Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Project Specification requirements, assisting the Stores to identify nonconforming materials and preparation of necessary NCRs.
- Monitoring of material traceability as required during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrange for NDT as required.
- Review NDT reports, radiographs and prepare necessary data books for the completed items.
Project Handled :
- QC / Welding Inspector on Yanbu Gasoline Pipeline Project, Saudi Arabia
- QC Inspector on Process & Utility Piping Work at Saudi Iron and Steel Company – Hadeed

- Jun 2001 to July 2004 : M/s Mabel Engineers Private Limited, Chennai – India
Mabel is one of the leading manufacturers of Pressure Vessels in Chennai India Meeting ASME Section – VIII Requirements.
Worked as QC Inspector for Material & Welding Inspection
Job Responsibility :
- Raw Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Code requirements, assisting the Stores to identify nonconforming materials and preparation of necessary NCRs.
- Monitoring of full material traceability during the Vessel Manufacturing, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrange for NDT as required.
- Review NDT reports and radiographs and prepare necessary data books for the completed vessels.
- Coordinate and monitor Welding Procedure Qualification and Welder’s Qualification to various code requirements.

- June 2000 to May 2001 : M/s Mold Tek. Technologies Limited - India
Worked as Engineer In charge of Materials and Maintenance and the main duties include sourcing, purchase and inspection of steel material required for dye making and planning and execution of preventive maintenance of all molding machinery.

- December 1997 to May 2000 : M/s. Nilkamal Plastics Ltd. India
Worked as Plant Engineer assigned as In charge of Materials and Maintenance and the Main duties include sourcing, purchase and inspection of steel material required for Dye making and planning and execution of preventive & breakdown maintenance of all molding machinery.

- May 1996 to November 1997 : C. S. K. Electrical Contractors, India
- Worked as a Site Supervisor for the execution of a major electrical contract involving the following work
- Erection of 750 kV A Transformer & 500 kV A Diesel Generator Set
- Cable laying & terminations, Installation of Motors up to 50 HP with Star Delta and D O L Starter, Power Capacitors & Building Lighting works.

PERSONNEL DETAILS :
Date of Birth : February 26, 1975
Martial Status : Married
Nationality : Indian
Language Known : English, Tamil & Hindi

[naveenjoshi2012]

RESUME :
Naveen Chand Joshi
Email ID : naveenjoshi011 AT gmail.com

CARRER OBJECTIVE :
To be a part of an organization that believes in continuous improvement, innovation and to excel in life, where I can effectively utilize my professional experience and can enhances my skills and strengths in conjunction with the company's goals and objectives.

SUMMARY :
An experience of more than 17 years in the field of construction and particularly for cross-country pipeline projects. Combines expertise in welding supervision & engineering with a practical experience in all facets of pipeline operations.

WORK EXPERIENCE :
Worked as a Welding Sr . foreman with Punj Lloyd in Sabah Sarawak Gas Pipe Line Project – Malaysia from 8 Jan 2010 To 28 Nov 2011
Worked as a Welding Sr. foreman with Transasia construction kazakhstan china gas pipe line
Dec 2008 to 19 Oct 2009
Worked as a Welding Sr. foreman with Punj Lloyd in EWPL project from 5 Oct 2007 to 19 Apr 2008.
Worked as a Welding foreman with Punj Lloyd in MDPL Jaipur from 2006 to 2007.
Worked as a Welder with Punj Lloyd in kazakhstan 2004 to 2005.
Worked as a Welder with Punj Lloyd in DUPL 2003 to 2004.
Worked as a Welder with SAUDI ARABIA AL.TAMIMI COMPANY 2002 to 2002.
Worked as a Welder with Punj Lloyd AJPL 2002 to 2002.
Worked as a Welder with DODSAL Ltd CCKPL 1999 to 2001.
Worked as a Welder with Punj Lloyd R.P.L 1998 to 1999.
Worked as a Welder with Punj Lloyd HAPL 1998 to 1988.
Worked as a Welder with Punj Lloyd MMPL 1996 to 1997.
Worked as a Welder with DODSAL Ltd VCPL 1996 to 1996.
Worked as a Welder with Punj Lloyd HBJ 1995 to 1996.
Worked as a Welder with Punj Lloyd KBPL 1994 to 1995.
Worked as a Welder with Punj Lloyd Welding Training 1994 .

PROFESSIONAL TRAININGS :
Lifting engineering course-advanced rigging, crane safety, lift planning and risk assessment.
Occupational 1st aid training by OSH training and Consultancy SDN.BHD Malaysia
Basic fire fighting training by OSH training and Consultancy SDN.BHD Malaysia
Work permit system for Petronas Malaysia

EDUCATIONAL QUALIFICATIONS :
Class 12th from C.B.S.E.
Welding training from ITI