www.madhura.net International Pune : Electrical Engineer

[krishni84]

madhura.net
Madhura is Expanding. More products are being added and the territory is also being extended. Madhura need more dedicated work force to accomplish the targeted growth rate. Presently for our expansion, Madhura is looking for:

Marketing Engineer (Electrical)
[LIST][*]
[LIST][*]

Candidates with min. exp. of 5-8 years in Marketing/Sales of Electrical/Electronics products

[*]

To develop business in Industrial & Marine segment in India & abroad (Neighboring countries)

[*]

Candidate to operate independently & report to head of the company

[*]

Candidate must be an Engineer with Degree/Diploma in Electrical or Electronics Engineering

[*]

Candidate with exp. on similar products (Products for Engine/Genset/Control Panel/Vehicle) will be an advantage

[*]

Job is for local candidate only & posting is in Pune (HO)

[/LIST]
[/LIST]

[LIST][*]

Service Engineer (Electrical)

[LIST][*]

Candidates with min. exp. of 3-6 years in service dept can apply

[*]

Job is for local candidate only & posting is in Pune (HO)

[*]

Candidate must have completed D.E.E. or Electronic Engineer from reputed Institute/college

[*]

Job involves providing Installation & Commissioning support, To provide training to OEM’s, provide back office support to sites

[/LIST]
[/LIST]

Please send your Resumes by post or Email only to:

MADHURA INTERNATIONAL
International Convention Centre,
A 202, Trade Tower,
Senapati Bapat Road,
Pune – 411016,
Maharashtra - INDIA.
E-mail: madhura2@vsnl.net
Website : http://www.madhura.net

[Guest-IJT]

Dear sir,
Presently I am working in Saudi Arabia for finalising EPC contract for Rabigh Stage VI for 4 X 700 MW with IFC (World bank) norms for emmission control.
My CV is as below

Curriculum Vitae
Name RaviMurali Qualification B.E. (Electrical). Passed in 1966 from
Osmania University in FIRST Division with
SECOND Rank from the University
Date of Birth 12-10-1943
Passport G 7045737 Valid up to 2018
Address for Correspondence Ravi Murali 303, Shubodaya Residency,
H.No.16-11-741/B/A-1, Shalivahana Nagar
DILSUKNAGAR, HYDERABAD , A.P. 500036
Tel: 0091-40-2405528 Mobile : 9989889043
E-mail: muraliravi AT hotmail.com
Experience:
42 years of experience in various fields of Power Plant management such as preparation of Basic engineering design study and Detailed engineering specifications, Techno commercial evaluations of the tenders, Participation in Technical meetings for finalising the contracts, Reviewing technical documents, Supervision of Construction, Commissioning, Operation and Maintenance of Thermal Power plants (Conventional and Nuclear), Gas Turbines(simple cycle, combined cycle), 220 KV and 33 KV substations and network and Desalination Plants. Worked with various consultants like La Meyar(West Germany), Kennedy & Donkin(England), Ewbank Preece,and also with English Electric, KWU, Babcock, Sidem, Siemens and ABB.
S.No From To Job Held Organisation
1 MAR ’06 Onwards Consultant DESIN Consultancy Pvt. Ltd.
2. JAN '02 JAN '05 Technical Adviser and Commissioning Expert MAPNA, Power Plant Management, Iran
4 X 325 MW, Arak Thermal PP, Iran
2 X 325 MW, Sahand Thermal PP, Iran
3. OCT '99 to DEC '01 Chief Engineer DESEIN Consultancy Pvt. Ltd. Hyderabad .
4. JAN '91 to FEB '99 Technical Adviser Consultancy for New Power Projects
And Operation and Maintenance for existing power stations General Electric Company of Libya, Homs power Station, LIBYA
- 4 X 150 MW Gas Turbines
- 4 X 127 MW Thermal Plant
- 4 X 10,900 m3 / day Desalination Plants
- 220KV & 30KV Sub-Stations
5. JUNE '82 JAN '91 Asst. Operation Manager General Electric Company of Libya ,
Homs power Station
6. APR '80 MAY '82 Senior Shift Charge Engineer General Electric Company of Libya ,
Homs power Station
7. APR '78 APR '80 Senior Engineer in 500 MW Engineering Cell and Senior Commissioning and Operation Engineer for Bandar Abbas Iran Tata Electric Company, in First 500 MW Engineering Cell Trombay, Bombay , India . Deputed to Bandar Abbas Power Station, 4 X 320 MW, Iran for about 7 months
8. DEC '71 APR '78 Scientific Officer – SD Rajasthan Atomic Power Project
Dept. of Atomic Energy, India
2 X 220 MW
8. JUN '66 DEC '71 Unit Control Board Engineer Kothagudem Thermal Power Station, APSEB, India consisting of 4x60 MW coal fired Boilers (IHI make) and Steam Turbines (Hitachi make)
Details of Work Experience:
1) Saudi Electricity Company:
1. From 15-04-2008 Deputed to Saudi Electricity Company Generation Projects Department by Desein Consultancy New-Delhi for the new projects in KSA for Preparation of Specifications, Pre-Bid clarifications, Technical evaluation of Bids, Post-Bid clarifications and contracting activities.
1. DESEIN Consultancy Engineers.
- Consulting Engineers for 360 MW Utran CCPP, Gujarat: Participation of Pre-bid meeting with the Qualified Bidders for clarifications and Tecno Commertial Avaluation of Bids from various Bidders and sending Recommendations to Client
- Preparation of Specifications for Long Term Service Agreement (L.T.S.A.) for Gas Turbines.
- Review Engineering of 500 MW Vijayawada TPP and 500 MW Bhoopalpalli TPP
. Consulatancy Services for 65 MW Captive Power Plant for Karthik Rukminy Alloys & Energy Ltd. At Sirpur Kagaznagar.
. Consultancy Services for 63 MW S.V. Power in Korba Chattisgharh.
. Consultancy Services for 300MW K.V.K.Neelachal Power Plant
2. MAPNA, Iran :
- Successful commissioning of 4 X 325 MW(Dong Fong Electric Company of China) Shajand Power project at ARRAK Power station and 2*325 MW (CMEC/SEC, Shanghai Electric Company of China) at Sahand power plant Marage, Iran and handing over to the client.
- Participation in Technical discussions in finalizing Technical matters with DEC and SEC.
- Findig Deffects and enforcing the suppliers of the plant to remove all the engineering Defects.
- Witnessing the Pre Commissioning Tests, Reliability Run Tests, Preliminary acceptance Tests and performance Tests and signing the protocols.
- Technical Adviser as a consultant for Arak and Shahand Power Plants
3. DESEIN Consulting Engineers, India .
- Owner's Engineer for review & consultancy for BAPL 230 MW Combined cycle Power Plant consisting of Siemens design Ansoldo 150 MW Gas Turbine V94.2 and 80 MW Ansoldo Steam Turbine.
- Lender's Engineer for NCC Combined Cycle Power Plant of similar Capacity.
- Preparation of Detailed Technical Specifications for 50 MW Gas Turbine for sewage treatment plant for Singapore .
- Lender's Engineer for Gas conversion of Lanco Gas Turbine Combined cycle Power Plant, Kondapally , India
4. Homs power station, Libya .
- Worked in the Project Engineering group, General Electric co. of Libya , for the construction and commissioning of 4 X 150 Gas Turbine Power Station of ABB make( GT 13 E1). Involved directly in Project Monitoring, Design Review and follow up activities in close association with ABB. Witnessed Safety Tests, Performance Tests and Acceptance tests.
- Worked in the Project group, General Electric Co. of Libya for Technical evaluation of Bids for Jawiya Project 4 X 150 MW GT’s, combined cycle conversion 5X 150 MW for the existing Benghazi North Power Plant
. Worked in association with Lahmeyer International Consultants West Germany in finalizing Feesibility Studies, Detailed Project Report (DPR) and EPC Specifications for Gulf project 6 X 350 MW in Libya,

- Taking over committee member of 4 X 127 MW Homs power station and 4x10900 M^3/day Desalination plant, in Homs Power and DesalinationLIBYA
Commissioning of Gas firing in existing oil fired 4*127 MW Homs Power Station
Undergone theoretical and on job training in BMS software (Burner Management System) of Teleperm – ME.
- Technical committee member to analyze and solve the problems in entire General Electric company of LIBYA(Electricity Generation and Distribution Company) .
- Taking over committee member of 4 X 150 MW Gas Turbine Power Plant
- Carried out many modifications to overcome various complex problems in Homs power station
- Co-ordination of Unit Major Overhauls with Babcock and Siemens KWU.
.Co-ordination of Gas Turbine Unit Major Overhauls( Inspection C ) with ABB

5. Tata Electric Company, Bombay .
- Worked as consultant in Unit No.5 First 500 MW Engineering Cell from TEC (Client) side in finalizing basic studies and participation in post bid meetings with venders..
- Deputed to Bander Abbas Power Plant, Iran 4*320 MW For Acid Cleaning and Steam blowing of the first unit.
6. Rajastan Atomic Power Plant.
- Commissioning and Operation of 220 MW English Electric Steam Turbine.
- Undergone Advanced Technical Training in Rajasthan Atomic Power Project.
- Operation of 220 MW Atomic Power Plant (Both reactor and Turbine)
7.Kothagudem Thermal Power Plant.
- Commissioning and Operation of 4x60 MW units consisting of IHI Boilers(Foster wheeler Design) and Hitachi Turbines.
- Commissioning and Operation of Coal Handling plant.
Ravi Murali

[Guest]

CURRICULUM VITAE
ATTEPALLY GANGADHAR
E-Mail : ganga204111 AT gmail.com ,
ganga204111 AT yahoo.com ,
Subject : Application for the post of “ Senior Electrical Draughtsman”
OBJECTIVE
To build career with dynamic and professionally managed CAD organization, and to reflect high standards of performance in any assignment given there by ensuring organizational and personal growth.
STRENGTHS
A hard core Electrical Drafting, with effective communication skills with a flair for proactively identifying and resolving problems. Believes in teamwork to complete the various assignments.
EDUCATION, TRAINING AND TECHNICAL PROFESSIONAL AFFILIATIONS
DEGREE
Graduate in “(B.Sc) Bachelor of Science” with First division from Osmania University in 1998, Hyderabad, INDIA.
AND Holding “WIREMAN” Certificate Awarded from “The Indian Technical Education Society” from MUMBAI.
SOFTWARE PROFICIENCY
Operating Systems Packages
- Windows-Vista, - Auto CAD-R-14 to Auto CAD-2010,
- Windows-XP-Sp2, - MS Word, MS Excel, MS Power Point, MS Out Look,
- Windows-ME, - Tribon (Shipping Package),
- Windows-2000, - MARS (Material Planning Package),
- Windows-NT, - Familiar with Micro Station – 95.
ADDITIONAL QUALIFICATIONS
- Computer Basic course and MS Office integrated course in Temosic Polytechnic Engineering School (Singapore).
- CAD integrated course in Temosic Polytechnic Engineering School (Singapore).
- System Trouble shooting and system Assemble fittings, in Temosic Polytechnic Engineering School (Singapore).
PROFESSIONAL EXPERIENCE : 12 Years 2 Months,
: 1 Year (Brunei),
: 4 Years (Singapore),
: 1 Year 7 Months (Abu Dhabi)
: Since – 5 Year 5 Months (Dubai).
EMPLOYMENT HISTORY
BK Gulf LLC, (Dutco Balfour Beatty Group) In DUBAI.
Job Period : Since November-2005.
Position
- Working as a Senior Electrical Draughtsman.
Major Projects
DUBAI (U.A.E)
- IKEA, Hyper Market, Atrium Shopping Malls, Dubai Festival City,
- Marsha Plaza, Inter Continental Residential Suit, Dubai Festival City,
- Camel Racing City at AL-Lissaili,
- Deira Cornish Fish Market,
- B + G + 1 Villa,
- Private Villa,
- Emirates Hills Development Project, EH-43,
- IBN Majid Restaurant,
- Abu Dhabi Investment Council (Al Buhair Towers) (at Present).
Job Profile
- Preparation of Electrical Lighting, Power, Fire Alarm, Low Current System Layouts and Schematic, Power Single Line Diagrams & Shop Drawings based on the Electrical Load Schedule.
- Preparation of Electrical Room Details, Electrical Services Setting out Layouts with prospective view and necessary information for the construction.
- Producing Cable Routings at each Panel and detailed Cable Trays, Trunking routs of Power Containment Layouts, and Lighting Protection Layouts. Reflected Ceiling Plan and, Builder work Drawings.
- Preparation of Shop Drawings, Equipment & Electrical Panel Layout Arrangement implementing with Engineer and Consultant Comments as per the Client Requirements.
- Preparation of As-Built Drawings with incorporating all revisions made during construction period and as per site condition.
- Coordinating with all other Services and Preparing Co-Ordination Drawings as per site condition and Client requirements at preliminary stage to avoid the discrepancy in the drawing and at the site.
- Performing site inspection to assure that construction carried out as per approved Drawings and Specifications.
Remco LLC, (Reliance Electro, Mechanical Co.) in Abu Dhabi.
Job Period : March-2004 to October-2005, (1 Year 7 Months)
Position
- Worked as a Senior Electrical Draughtsman
Major Projects
ABU DHABI (U.A.E)
- Mr.Suheil Bin Oweida Al Khialy Commercial Building at Abu Dhabi.
- H.H.Sheikh Sulthan Bin Zayed Tower Located at Abu Dhabi.
- First Gulf Bank 8 Villas Compound Located at Abu Dhabi.
- Ministry of Interior Proposed Swihan-2 for M.O.I at Swihan, U.A.E.
- Abdul Raheem Al Sayed Mossa Mohd, Al Hasmi Commercial Building.
Job Profile
- Preparation and Responsible of Electrical Engineering Shop Drawings.
- Preparation of Equipment & Electrical Panel Arrangement Layouts.
- Mechanical and Electrical Co-Ordination Plan.
- Cable Routing at each Panel and detailed Cable trays in 2D and 3D Drafting and Solid Designing.
- Utilize Microstation-95, creating basic geometry, 2D and 3D Drafting’s and View objects, down loading views to AutoCAD.
Singapore Technologies Marine Limited, in Singapore.
Job Period : July-1999 to July-2003, (4 Year’s)
Position
- Worked as an Electrical Draughtsman.
Major Projects
SINGAPORE
- P/F Interface (LST), Republic of Singapore Navy.
- Ketone interface Republic of Singapore Navy.
- Tide Water, U.S.A. Navy.
- Velox Republic of Singapore Navy.
Job Profile
- Preparation of Electrical Engineering Drawings.
- Structure Isometric Drawings, Equipment & Electrical Panel Layout Arrangement.
- Preparation of Electrical specification and Bill of material using MARS Packages.
- Cable Routing at each deck, Comings locations and details, detailed cable tray in 2D and 3D Drafting. And various Electrical Systems Schematics, Layouts and Panel installation.
- Utilize Tribon-5, Creating basic geometry, 2D and 3D Drafting’s, view objects in ship model and converting views to Auto CAD.
Hazi Sulan Engineering Contracting Co. in Brunei.
Job Period : July-1998 to June-1999 (1 Year)
Position
- Worked as an Electrical Draughtsman.
Job Profile
- Preparation of Electrical Lighting, Power, Fire Alarm, Low Current System Layouts and Schematic.
- Producing Cable Routings at each Panel and detailed Cable Trays, Trunking routs of Power Containment Layouts and Lighting Protection Layouts.
- Using MS Office for the Document creation and distribution drawings to the Clients and Construction.
HOBBIES
- Internet Browsing, Interacting with peoples, making friends, Travailing, Sports, Reading Books, Watching TV etc.