www.uhdeindia.com Uhde India Pvt Ltd Pune : Electrical Engineer

[muthukalee]

uhdeindia.com

ELECTRICAL

Skills

Graduate Engineers highly skilled in Basic engineering and detail engineering of Chemical, Petrochemical and Utility Plants having in depth knowledge in:• Design of power distribution network and protection
• Procurement
• Layout engineering
• Inspection & Expediting
• Failure / Fault Analysis

Job Profile

• Technical Expert - Providing technical support to the task force engineers and guide them.
• Continuous monitoring of task force activities, ensure meeting the quality and time schedule.
• Capacity to carryout design review and QA Audits.
• Training the junior colleagues.

About us :
From a Construction Office in 1965, to a Branch Office of parent company Uhde GmbH, Germany in 1970, to an Indian public limited company in 1977, Uhde India Private Limited has come a long way in being recognised as a major EPC company in India and abroad.

Contact us :
Uhde India Private Limited
Uhde House
Lal Bahadur Shastri Marg
Vikhroli (West)
Mumbai 400 083, India
Tel : 91 22 6796 8000
Fax : 91 22 2578 4327
E-mail : uhdein@vsnl.com
http://www.uhdeindia.com

[mohamedshahan]

Curriculum Vitae
Abdul Wahab Iqbal
DOB : 15/07/1978
Nationality : Indian
Mail ID : mohamedshahan AT hotmail.com ,
mohamedshahan AT gmail.com ,

(M) : 0091-9487157034.
OBJECTIVE To become established in a challenging position where I can effectively utilize my skills, experience and initiative.
Resume Summary
Experience 10 years
Key Skill Construction & Maintenance

Functional Area Petrochemical, oil&gas, Fertilizer and EWDP.
Area of Specialization Construction, Maintenance &Engineering
Of Electrical Systems.
Education D.E.E.E. / April1998
License “C” License Holder From TNEB.
University Mohamed Insituite of Education & Technology
Trichy, Tamil Nadu, India.
Work Experience :
1) From Oct 2008 to Mar 2010
Name of Organization : SABIC, Saudi-Kayan Petrochemical Company
(Through - K.B.R.)
(Saudi-Kayan is world’s largest integrated Petrochemical complex)
Designation : Electrical Supervisor
Job Responsibility :
1) Assigned the Electrical Q-Captain and responsible to maintain the high construction quality of electrical equipment to meet project specifications and international standard.
2) Planning, Supervision and execution of laying of Electrical cables such as MV / LV / control cables.
3) Testing of Electrical Equipments and cables.
4) Industrial wiring & small power lighting work.
5) Cathodic protection installation of pipe lines, tank areas, columns.
6) Design of cable routing, designing for lighting arrangements, cable tray designing etc…
7) Preparing and delivering technical presentation to electrical technicians.
8) Prepare the three week look ahead schedule report that needs to be submitted to the Planning department for review and inputs to draw up the final execution plan for the electrical department.
9) Supervise the team for timely and accurate work execution. Ensure that all the work activities get completed as per the quality norms and as per project specifications.
10) Responsible for establishing, promoting and maintaining a safe and hazard free working environment. Formulates and develops safety policies and procedures with the help of the HSE Manager.
2) From June ‘1998 to May ‘2008
Name of the Organization :

1) SABIC,Safco – IV, Fertilizer Company (As Technician Through - Al-Hugayet)
2) K.O.C, Kuwait Oil Company (EWDP),Through - Kharafi National
3) Saudi Aramco,Berry Gas Plant,( Through - Gama )
4) Impregilo, Kingdom Tower Centre,( Through – Gama )
5) Icomm India Private Limited (India).

Designation : Electrical supervisor
Job Responsibility :
1) Operation and Maintenance of motor control centre & power control centre.
2) Planning and execution of routine preventive maintenance of electrical equipment on monthly and yearly basis.
3) Coordination with OEM and external agencies to carry out emergency jobs.
4) Job list planning and scheduling of electrical work for annual plant shut down.
5) OFF line and ON line testing of critical equipments through external agencies to check the healthiness of system as a part of predictive maintenance.
6) Reporting direct to manager and responsible for the day - to – day supervision of electrical maintenance, corrective and preventive maintenance activities.
7) Planning of manpower to carry out various activities.
8) Installation of Motors, modules, lcp, conduits, cable trays.
9) Laying & termination of power & control cables.
10) Prepare material requisitions, perform technical, material inspection.
Maintenance Exposure :
1) Maintenance and trouble shooting of motors rating from 0.37 KW to 8.5 MW.
2) Maintenance and trouble shooting of transformer from 230KVA/34.5KVA to 4.16KVA/480V.
3) Operation and Maintenance of 4.16 KVA EDG set (Paxman, England).
4) Maintenance and Trouble shooting of Motor control center & power control centre.
5) Operation and Maintenance of SF6, Vacuum and Air circuit breakers (ABB make).
6) Operation and Maintenance of 230V UPS.
7) Carrying out preventive & breakdown maintenance of all type of electrical equipments.
8) All type of motors in the field on no load & load test (check voltage, Amp, vibration, Temp, etc…)
9) Replacing & repairing of electrical motors & starters of LV/HV.
10) HV/LV motor’s replace the damage parts (Terminal block, bearing, glands etc…).
Project Exposure :
1) Selection of Electrical Equipments according to Hazardous area classification.
2) Study of electrical drawings with the consultant and to make necessary changes wherever required as per site situation.
3) Selection of Electrical equipments according to hazardous area classification.
4) Estimation, preparing and issuing of work order to external contracting agencies to carry out the commissioning activities.
5) Erection of cable trays, cable laying, cable termination for MV/LV electrical equipments.

Software Exposure
- Software Packages : MS – Office,
- 3D Model Application Knowledge,
- I am well acquainted with Internet and its applications.
Awards and achievements
- Plant safety awards

[Guest]

Archana Sungare
Objective :
- I want to be an efficient technical person in the competitive environment and
Working with talented people, which will help me to explore myself fully.
Technical Skill :
-
Software Skills
Projects/Training :
-
Vocational Training of 110/33/11 kV Substation at Maharashtra State Electricity
Transmission Co. Ltd., Sangli
Training of Control Panels of RAM Extrusion Machines & Ovens
Mini Project on Photocell Detector
Seminar on Magneto-Hydro Power Generation
Visit to Munde Substation at Karad.

MATLAB7.1, Assembly C
Vocational Training (2010) :-

Name of company : Hindustan Nylons, MIDC Miraj.
Duration
: 15 Days
B.E Project :
“FREQUENCY RESPONSE ANALYSIS AS A DIAGNOSTIC TOOL”
Overview :
Frequency response analysis (FRA) is one of the active research areas in the
transformer diagnostic studies. If there is some deformation in the transformer winding then
it can be checked by using MATLAB. In FRA, a transfer point function of a winding under test is
obtained by sweeping the frequency from few Hz to MHz .
Summary of Qualification
B E (Electrical)
S.S.C. ( 10th )
H.S.C ( 12th )
Diploma in Electrical
64.00%
82.40%
71.00 %
80.00%
Shivaji University, Kolhapur
Kolhapur Board
Kolhapur Board
M.S.B.T.E Mumbai
Languages spoken
-
English, Hindi , Marathi, Kannada
Extracurricular activities
-
Participated in a (Quantum) National level on subject HVDC & FACTS organized by R.I.T.
Sakharale
Participated in a (Electrical) at National level event ELECTRIKA organized by G.C.E. Karad..
Membership of National level event “ELECTRIKA”.


Participated in management event, aptitude test
Hobbies
a. Listening music ,making friends & reading.