Electrical Engineer Saharanpur : Star Paper Mills

[krishni84]

Astt.Manager/Dy.Manager-Finishing & Converting

Candidates should be graduate in any discipline having 12-15 years of experience in Finishing & Converting of paper in Paper Industry.

Sr.Engineer / Astt. Manager-Electrical
Candidate should be Diploma holder with minimum 7 years experience or Degree Holder with atleast 5 years experience with large scale manufacturing company / unit.
a.) Digital / Analogue A.C./D.C. Drives (Siemens, Eurotherm, Gemco,ABB,Allen Bradley).
b.) Electrical Equipments for maintenance, Erection & commissioning.

Forest Officer
Candidate should be graduate in Agriculture Science having expertise in clonal forestry. Experience of 2-3 years in clonal forest is essential.

Please download & fillup the attached Application form and email to careers.sre@starpapers.com

Application Form : http://www.starpapers.com/spm.asp?page=ca

About Us
S tar Paper Mills Limited established in 1938, is an integrated Pulp and Paper Mill. Starting with 6000 MT/annum, it has come a long way and produced of 72000 MT in 2008-09. It produces a wide range of Industrial, Packaging and Cultural Papers catering to almost all segments of the Consumers. Star has a distribution network throughout the Country.

Contact Us
S tar Paper Mills Limited
B.D. Bajoria Road,
Saharanpur - 247 001, U.P., India.
E-mail : star.sre@starpapers.com
Web Site : www.starpapers.com

[Guest-IJT]

CURRICULUM VITAE
Santosh Kumar Pal
Indore

E-mail : spal_19 AT yahoo.co.in

Job Objective : -
To explore my maximum potential and utilize for betterment of the organization.
Professional Qualification : -
1. Diploma In Mechanical Engg. From S.V. Poly. Bhopal with 1st division (M.P.Techanical Board Bhopal).

Educational Qualification : -
1. Higher Secondary with IInd division (M.P. Education Board).
2. High School with IInd division (M.P. Education Board).

Software Exposes : -
1. Two months Training in CNC Programming & Operation on Siemens & Fanuc Controller
(CRISP. an Indo-German Co-operation Project Bhopal).
2. Auto-Cad. (Prema Software Solution, Bhopal).
3. I-Deas (Modeling, Assembly, Manufacturing, Drafting) Prema Software Solution ,Bhopal.
4. Pro-Engineer. (Modeling, Assembly, Drafting) Prema Software Solution, Bhopal.
5. Autodesk Inventor (Modeling, Assembly, Drafting) Prema Software Solution, Bhopal.

Working Experience : -
1. Worked with Hoisto-Structures & Equipments Pvt. Ltd. Bhopal. On contract basis for preparation of Manufacturing & fabrication Drawings. Using Auto-Cad Since July. 2000 to Dec. 2003 (16 Months on Part Time)
Company Profile
(i). Radial Gates (ii). Gantry Crane (iii). Vertical Gates
(iv). Stop Logs (v). Hoist (vi). Monorail Crain
Job Profile :
- Drawing Preparation of Steel Structure (Dams & Canals Gates, Stop logs, Hoist, Gantry.)

2. Training at Eicher Tractors (A Unit of Eicher Motors Ltd.), Mandideep Distt. Raisen (M.P.). In Product Development Department (R&D). Using Auto-cad & Pro-E. Since May 2004 to Nov. 2004. (6 Months as on Contract)
Job Profile :
(i) Part modeling (ii) Sheet Metal Works (iii) Assembly
(iv) Develop new component according to the requirement

3. Worked with Gatiman Auto Pvt. Ltd. Is a QS-9000 Certify Ancillary in Pithmapur, (M.P.) as a J.Engg. In Tool Room (Product Development Department) Since1st Feb 2005 to 14th Nov. 2006 (21 Months)
Company Profile : -
Gatiman Auto Pvt. Ltd. Is a QS-9000 Certify Ancillary in Pithmapur, (M.P.) for Kinetic Motors Ltd. Bajaj Tempo Ltd., Eicher Motor Ltd., Eicher Tractors, L & T Case Equipment Ltd., Hindustan Motor Ltd. & Also Supply To Ford India Ltd. Manufacturing of Sheet Metal Components, assemblies & sub assemblies.
Job Profile :
- Working on Sheet Metal
- Develop Press Parts according to the customer requirement
- Study of Drawings & Specification of customer, preparing detail of Product/child parts.
- Conducting the Production Trial of Product.
- PREPARING Part Production Approval Process (PPAP).
- Co-ordinate in Tool Room, Quality & production department.

4. Presently Working with (Malwa Tools Pvt. Ltd. Indore) become Malwa Precision Pvt. Ltd. Dewas Is a Heavy Machineries Manufacturing Organization, as Project & Manufacturing Manager from Dec.2006 to till date
Company Profile :
Malwa Precision Pvt. Ltd. Dewas. Is a Heavy Machineries Manufacturing Organization, Making Machines & Handling Equipments for Steel Industries and Other Equipments as per the Customer requirements. Our Customers are Welspan, Essar, Jindal Power & Steel Ltd,, National Steel, Asian Colour Coated Ispat Ltd.& Man Industries Ltd., ITL Indore
List of Machines & Equipments :
(1). Uncoiler (2). Recoiler (3). C-Hook (4). Coil Car (5). Transfer Trolley (6). Coil Tilter (7). Coil Grab (8). Sheet Lifter (9). Leveler (10). Tube Mill 2” NB (11). Ejector (12). Receiver
(13). Ejector cum Receiver (14). Diabolic (15). Wagon Rotator
(16). Tool Holder (17). Pipe Polishing M/c (18). End Facing & Beveling M/c
(19). Pinch Pass Leveler
Job Profile :
- Design and Develop New Machineries and Equipments.
- Study drawing & take further action for manufacturing.
- Arrange Materials & Accessories (According to Drawing Requirement)
- Proper planning (Cutting, Fabrication, Machining, Assembly)
- Manage Shop floor (work Load Distribution & Flow Process )
- Supports to Manufacturing & Fabrication
- Take action to Control Rejections & Reworks
- Proper Coordination
- Erection/ commissioning

Personal Information :
Date of Birth : 12th Sep. 1977
Father’s Name : Shri Ganesh Pal
Language Known : English & Hindi
Strength : Team sprit, Flexibility, Self confident
Pass port : Available

Date :- 27-09-2010
Place : - Indore (Santosh Kumar Pal)

[Guest]

CURRICULAM VITAE
RAKESH YADAV

Email :-er.rk3701 AT gmail.com
er.rk3701 AT rediffmail.com
.
CAREER OBJECTIVE :
To obtain challenging and responsible position in an organization where I can contribute to the successful growth of the organization by using my ability and skills and further improving my professional and personal skills.

EDUCATION :
SCHOOL 2004 U.P BOARD (ALLAHABAD)
Matriculation 2006 U.P BOARD (ALLAHABAD)
10+2 (Non Medical) TECHNICAL MAY- 2010
B.Tech in Mechanical Engineering with 72% marks from K.C College of Engineering & Information Technology, Karyam Road Nawanshar,Punjab, (Punjab Technical University)

SUMMER TRAINING :
1. Industrial Training
Place :-B.H.E.L (HARIDWAR)
Duration : - 6 weeks
.
2. Industrial Training
Place : - B.H.E.L (HARIDWAR)
Duration : - 6 Months

COMPUTER LITERACY :
- MS-OFFICE & Internet concepts.

INTERESTS :
- Learning new technologies related to Mechanical Engineering.
- Listening Music, Visiting beautiful places.
- Surfing Internet.
- Watching Cricket.

[Guest]

CURRICULLUM VITAE
GOURAV VERMA
.
E-mail : ravma_013 AT yahoo.com

Objective : To obtain a challenging position in the field of technology with a growth-oriented firm that provides opportunities for advancement where in I can utilize and develope my Technical skills and Personal traits.

Academic & Technical Qualification :
Diploma/ Certificate Institute/Board Year %age :
High School B.D.Bajoriya Inter College, U.P.Board,Saharanpur (U.P.) 2002 46
Intermediate B.D.Bajoriya Inter College, U.P.Board,Saharanpur(U.P.) 2004
63

Electrical Engineering :
Three years diploma in Electrical Engineering from Govt. Polytechnic, Jhajjar (HR.) 2007 63

Key Skills Electricals/ Electronics :
- Design and wiring of Star - Delta Starter, D.O.L. starter, Forward-Reverse rotation of motor and Control Diagram Ckt.
- Interfacing the PLC troubleshooting.
- Handling the AIR Compressor .
- Interfacing and Install of Electronic Cards according to use.
- Worked with all machinery panel with help of their Drawing.
- Checking Earthing Value and improve it according to use.
- To understand the Relay,Sensor(Photo Sensor/Proximity-Two wire/Three wire Sensor/Ultrasonic Sensor)and Contactor Logic(NO/NC),its fundamental and interface problem due to this Sensors.

Computer Skill :
- Basic knowledge of computer.
- Basic knowledge of Internet.

Job Profile :
Johnson Lifts & Escalator Pvt. Ltd.Mahipalpur{New Delhi} :
- Understand the troubleshooting of elevator,Logic I/P-O/P and rectify all mechanical,electrical and electronics cards problem.
- Provide a good service to the customer.
- Handling the V3F and VFD Problem.
- Testing and commissioning of drive, electronic card according to its Logic.
- Understand the AC-DC Relay Logic and Contactor Logic and repair if necessary.
- Maintain all service & maintenance record .

East African Remedies{EAR}Selequi,Dehradun{U.A.}. :
- Handling breakdown of the all Beta and Non-Beta Plant Machinery and also maintain their record like Blister packaging machine,ALU-ALU packaging machine,Strip Packaging machine,Tablet Compression{rotary and punching type}machine,FBD{Full Bad Dry} machine etc.
- Operation of DG Set 82.5 KVA and maintain their record.
- Maintain all three phase,single phase motor ,check thier current rating and maintain their record.
- Maintainance of substation and maintain their record.
- Maintain all D.O.L.and STAR-DELTA STARTER of motors.
- Checking the Earthing Value and maintain their record .
- Checking the Capacitor Panel current and maintain their record .
- Operation and Maintenance of all water cooler,A.C.(Split/Window) and maintain their record.
- Maintain all technical reports and inform to management .
ITC Ltd.(PPD) S.I.D.C.U.L.,Roshnabad (Haridwar)
- Handling breakdown of the all Flexible Line machine(Rotomec,Exrusion, Printing,Slitting,Co-Extrusion,Pouching,Laminator) and Carton Line machine (Off Set Printing,Hot Foil Stamping,Folding and glueing machine).
- Operation of 500 KVA UPS,800 KVA UPS,800 KVA UPS.
- Maintain all three phase,single phase motor ,check thier current rating.
- Doing maintenance of all machines and maintain their Panel. Maintain all D.O.L.and STAR-DELTA STARTER of motors and doing all electrical work.
- Maintenance of auto rolling door and interface its troubleshooting.
- Operation and Maintenance of Thermic Fluid Plant.
- Maintain all technical reports for EHS Audit and work in EHS Audit

Work Experience -
Worked as a Diploma Technician(Service & Maintenance Deptt.) with “Johnson Lifts & Escalators Pvt. Ltd.” at Mahipalpur (New Delhi) since 25 Aug 2007 to 20 March.2009.
- Worked as a Electrician (Electrical Deptt.) with “East African Remedies”{EAR}Selequi,Dehradun{U.A.} since 05 May 2009 to 28 Dec. 2009 .
- Working as a Operation Assistant (Electrical Deptt.) with ITC Ltd. Packaging and Printing Division since 11 jan. 2010 to till date.
Company Profile - Worked with Johnson Lifts & Escalators Pvt. Ltd. at Mahipalpur( New Delhi )Which assemble the elevators & escalators provide erection,testing & comm. and service & maintenance.
- Worked with East African Remedies”{EAR}Selequi,Dehradun{U.A.} Manufacturing Tablet,Capsules,Dry syrup,Dry Injection,Liquid injection,Anti-Bectrial Cream.
- Working as a Operation Assistant (Electrical Deptt.) with ITC Ltd. Packaging and Printing Division which is ISO-9001 2000,ISO-14001 2004,OHSAS-18001 :2007 certified company. doing printing work for flexible film and Paper Board .

[Unregistered]

CURRRICULUM VITAE
MR. RAJENDRA V. PANDEY
E-mail : rajendrap20067 AT gmail.com

CAREER OBJECTIVE : - “To put a Landmark for Electrical Enggs. in current competitive and high-Tech Power industries
through Earned Skills, Innovation, Hard work and commitment towards profession”

TOTAL WORK EXPERIENCE : 30+ Years in Electrical Engineering

PROFESSIONAL PRACTICE :
1) M/S KEJRIWAL GEOTECH PVT. LTD. VILL. KARELI, TAL. PALSANA, DIST. SURAT, GUJARAT
Duration : From NOVEMBER 2011 To NOVEMBER 2012
Position Held : Manager (Head- Electrical)
Job Responsibilities : Project Execution, Erection, Installation, Commissioning, Testing & Negotiation.

2) M/S CHIRIPAL INDUSTRIES LTD. (Fiber Division & Power Plant ), NAROL, AHMEDABAD, GUJARAT
Duration : SEPTEMBER 2009 To NOVEMBER 2011
Position Held : Manager (Electrical)

3) M/S JINDAL POLYFILMS LTD. MUNDHEGAON, NASIK, (MAHARASHTRA).
Duration : OCTOBER 2007 To AUGUST 2009
Position Held : Manager (Electrical)

4) M/S FILATEX INDIA LTD. Damini Road, DADRA, D &N.H.
Duration : MARCH 2004 to OCTOBER 2007
Position Held : Dy. Manager (Electrical)

5) M/S J.B.F. IND. LTD. VILL- ATHOLA SILVASSA, D&N.H.
Duration : OCTOBER 1998 To FEBRUARY 2004
Position Held : Electrical Engineer

6) M/S ORKAY POLYESTER LTD.(GROUP- ORKAY SILK MILLS) M.I.D.C. PATALGANGA, RAIGARH MAHARASHTRA
Duration : APRIL 1981 To JUNE 1998
Position Held : Senior Engineer (Electrical)

7) M/S BHARAT AUTOMATIC ELE. INDUSTRIES BHANDUP, BOMBAY, MAHARASHTRA
Duration : NOVEMBER 1978 To MARCH 1981
Position Held : Production Supervisor

PROFESSIONAL QUALIFICATION : DIPLOMA IN ELECTRICAL ENGINEERING:
PROFESSIONAL SKILLS : Site Management, Erection, Installation, Commissioning, Testing, Operation, Maintenance,
Negotiation and Repairing of following Electrical Equipments/Machineries :
1. 132KV/11KV, 66 KV / 11 KV--Switch Yard with line Isolator, Earth Switch & SF- 6 Breaker capacity 3150 amps. with 132kV / 11KV,66 KV / 11 KV , 10/12.5MVA, 16/20MVA Transformers (ONAN/ONAF) with O.L.T.C. and associated S/W GEARS 11KV VCB capacity 1250 amps.
2. 22KV- 8 POLE Structure switch yard consisting Outdoor, indoor, HT Breaker (M.O.C.B) with 22 KV/0.433KV, 2MVA & associated H.T.&L.T. Switchgear (M.O.C.B., S.F-6 & ACB TYPE).
3. Was working on 30MW Thermal Power plant, Power Generation NIGATA MAKE-8MVA, 3.9MVA-11KV and C.K.D. SCODA make Diesel Generator sets 11KV, 2270KVA with H.T. Breaker (Vacuum) and 11KV / 0.433KV, 2.5MVA Transformer and Associated Switch Gears with PLC Control Panel and Engine Maintenance.
4. NO-BREAK Generator Set, AMF Generator Sets with 1100KVA Capacities and Conventional Diesel Generator Sets and their control panel and automatic changeover switch gears with Engine maintenance.
5. All Types of Air-Conditioning system like Control Package, Split Window units and other Utility, Boilers, Fire Fighting and ETP Plant.
6. Flame Proof Motors and their control gears in Hazardous area.
7. Thyristor Controlled Variable Speed Drives/Inverter Drives, Scada and PLC Automation works, Overhauling of A.C. /D.C. Motors.
8. Chips-Dryers, SPG plant with T/UP section, and Poly Plant (Chips Manufacturing).
9. Co-Ordination with Stores & Electrical Workshop & other Maintenance Section.
10. Inspection and Testing of Electrical Equipment and spares.
11. Technical knowledge of Mechanical and Instrumentation Department.

ACHIEVEMENTS IN SERVICE :–
- Project Completion of M/S Kejriwal Geotech Pvt. Ltd., Kareli, Surat
- Power Factor Correction and Energy Saving by SAI-EL PANEL/CAPACITORS.
- Synchronization and Loading by ALLEN BRADELY make PLC Based Automation Synchronization and Load Sharing Module of H.T.D.G. Sets and L.T. D.G. Sets & Paralleling of Grid Supply.
- Modification of Electrical Control CKT. To avoid tripping of Continuous Process Plant during power fluctuation and automatic quick restarting of utility machines to avoid production losses under perfect protection and safety ranges.
- Smooth Running of Variable Speed Drives and Modification in Power Distribution System to do the preventive Maintenance jobs on Transformer lines without disturbing the Loads.
- Installation of TATA LIBBERT make UPS & Battery Bank to avoid Tripping of Plant Equipment.
- Well Conversant with Planned Predictive / Preventive Maintenance Schedule, Project work, Fault Analysis, Man Power Planning, Departmental Administration & Liaison Work.

Extra Curricular Activities :
- Deep Interest in spirituality
- Reading spiritual literatures
- Good command over Healing by Yoga, Pranayam & Ayurveda

Computer Awareness :-
- Familiar with windows environment
- Familiar with MS-Office 2003-2007
- Internet Applications
- Making and Handling Data-sheets in MS-Excel.

Languages known : Hindi, English

Personal Profile :
Name : Rajendra V. Pandey
Father’s Name : Shri Vishwanath Pandey
Sex : Male
Date of birth : 01/07/1955

Rajendra V. Pandey

(Signature)