Saipem Triune Engineering Pvt Ltd Delhi : PDS / PDMS Piping Designer/ Checker

[Admin]

Designer/ Checker
• Development/ preparation of piping conceptual drawings (study drawings).
• Development /preparation of equipment layout drawings adhering to process flow sequence,
maintenance & operational requirements.
• Finalization of nozzle orientations and \platform arrangements.
• Preparation and checking of piping general arrangement drawings.
• Squad checking of Mechanical, Civil, Structural, Electrical, Instrumentation drawings.
• Review of process & utility P&ID’s, Line list.
• Review of vendor drawings.
• Preparation of material takes off.
• Guidance to draftsman in design matters.
• Knowledge of PDS/PDMS Navis works, SPR.

Qualifications: ITI draftsman (Mechanical) or Diploma in Mechanical Engineering.
Experience: 15 - 20 years in Oil and Gas industry.
Desirable: PDS/PDMS modeling experience.

http://www.saipemtriune.in/career/piping.pdf
E-Mail Your Resume

‘Saipem Triune Engineering Pvt .Ltd.’
B-1 / H4-A
Mohan Co-operative Industrial Estate,
Mathura Road, New Delhi-110044, India

[Guest]

Curriculum – Vitae
RAJENDRA CHAUDHARY
Job Title : Sr. Draughts man mach., piping Draughts man
Email ID :- r_rajendrachaudhary AT edificial , hlrajendrachaudhary AT gmail.com

Objective :-
To walk on challenging projects, in dynamic and reputed organization which can utilize the inherent talent of the incumbent to maximum and be honest to job and do rest till the job is done.

Current Job - : Sr.Draughts Man (Mech.) in
Heinz India Ltd. Chherat, Aligarh (MNC)
U.P. – 202001
Working Experience :- 06 Dec. 2010 to tell date (Total Experience 08.04)

WORK PROFILE :-
Preparation of Fabrication Drawing , Bill of material for all Dairy Equipment , on Process Drawing Civil Layout & Installation , Piping Layout & Plant Installation , Foundation Drawing , Component Drawing & Machinery part , steel structural Drawing , Using Auto Cad
Sr. Draughts Man (Mech.) in
Usher eco power Ldt. ,630 Dautana , chhata, Mathura
U.P. – 281401

Working Experience :- 07 May. 2010 to 05 Dec. 2010
WORK PROFILE :-
Preparation of Fabrication Drawing , Bill of material for all Rice Equipment , on Process Drawing Civil Layout & Installation , Piping Layout & Plant Installation , Foundation Drawing , Component Drawing & Machinery part ,ash handling , steel structural Drawing , Using Auto Cad
Sr. Draughts Man (Mech. & piping) in
Indian oil Corporation Ltd. Mathura Refinery , Mathura
Uttar Pradesh.
Under M/s VAULTER ENGINEERING SERVICE
Pvt .Ltd. Jaipur Raj.

Working Experience :- Jan.2007 to May. 2010
Description of work Experience
Designation Duration Project Detail
Indian Oil Corporation Limited
Mathura Refinery , Mathura (UP)

Sr. Draughts man (piping) - : Designing of piping routes for installation of Vessels , Filters ,
Jan. 2007 to May. 2010 Pumps , F/W facilities , like F/W Monitors , hydrants ,sprinklers
(CAD OPERATOR) etc.
Preparation of fabrication Drawing.
Preparation of piping GAD. And Isometric Drawing and CAD .
Development of equipment drawing after site measurement.
Preparation of As-Built piping drawing.
Preparation of equipment layout drawing.
Material Take Off.
Scanning works.

Working Experience :-
Working with M/S Swapnil Switches Pvt. Ltd.
19/17, Harinagar , Gopal puri , Aligarah (UP) From Jan 05 to Dec.06 date as a ( Draughts man mech.)
WORK PROFILE :-
Preparation of Fabrication Drawing for all automobile switches Drawing.

Working Experience :-
Working with M/s Food & Biotech Engineers (INDIA) Pvt.Ltd. Sector -37,Faridabad From Jul.-04 to Dec.04 date as a Draughtsman (mech.)
Company : Food & Biotech engineers (INDIA) Pvt.Ltd. Faridabad.
COMPANY PROFILES
It is ISO 9001 :2000 & CE Certified Company Designers, Engineers, Consultants & Manufacturer of all types of equipments for Dairy , Food Processing , Chemical, and Allied Industries.
WORK PROFILE :-
Preparation of Fabrication Drawing , Bill of material for all Dairy Equipment , on Process Drawing Civil Layout & Installation , Piping Layout & Plant Installation , Foundation Drawing , Component Drawing & Machinery part , steel structural Drawing , Using Auto Cad.

Educational Qualification :
10+2 From up , Board ,ALLAHABAD (1996)
Technical Qualification :
Institute / Board Branch Year of passing
1. ITI Govt. Industrial Training Mechanical 2004
Institute Mathura (UP)
2. Auto CAD :- CADD Center (CEDITI) Complete Course (2D , 3D) 2004,06,07,08,09,2010
Mathura (UP)
3. Computer :- Basic Knowledge , MS office, Word , Excel ,

Personal Profile :
Full Name :- Rajendra Chaudhary
D.O.B. :- 01-01-1978
Nationality :- Indian
Local Address :- Sikandra , Agra (UP)
Email ID :- r_rajendrachaudhary AT rediffmail.com hlrajendrachaudhary AT gmail.com
Permanent Address : Mahavan , Distt. Mathura(UP)
Marital Status :- Married
Hobbies :- Hand ball , Cricket & Listening Music .
Place :- ( Mathura)
(Here I do declare that above mentioned details are correct as best of my knowledge)
(Rajendra Chaudhary)

[Unregistered]

TSS projects, as a Senior Piping Designer/ checker.
I also possess another 15 years experience in Product oriented companies as Mechanical Designer / Draughtsman.

SYNOPSIS OF PROFESSIONAL EXPERIENCE :
1) : More Than 18 years in OFFSHORE PLATFORM – WELLHEAD, PROCESS PLATFORM PIPING
2) : More than 3 years in ONSHORE CROSS COUNTRY PIPING
3) : More than 1 year in PETROCHEMICAL REFINARY, TANKFARM STORAGE AREA PIPING
4) : More than 3 years in FERTILIZER, CHEMICAL, PETROCHEMICAL & PHARMACEUTICAL Industrial Piping.
5) : More than 14 years, in Machine Design, Tool Design, Material Handling and Mechanical Component Drawings.
Experience :
I was working as, Senior Piping Designer/Checker in SMOE-singapore, deputed by M/s HASK Engineers & Management Services Pvt. Ltd., from September 2011 to 30th April 2012, to work in Conoco Philips accommodation cum Utility platform Piping.

Team leader Piping-Consultant Services (In Worley Parsons Sea India limited, Hyderabad, From Dec. 2010 to 30th April 2011) :
In the position of Consultancy services as Team Leader Piping.
B-193 Living Quarters and Utility Platform.
Top side modification of Wellhead platform for Gas Injection
Finalizing Equipment lay-out and assisting Piping Designers in Pipe Routing and Supporting..

Dy Chief Piping Designer (In J Ray Mcdermott Engineering Services Private Limited, Chennai, From Nov 2009 to Dec 2010) :
In the position of Dy. Chief Piping Designer
Bulk material estimation, and Checking.

Piping Engineer (In KBR-Qatar, From June 2009 to Aug. 2009) :
Pearl-GTR Project, RasLafan / Shell-QGPC Project, Qatar
In the position of Piping Engineer, on the Construction site for,

Small bore Pipe Supporting, modifying Pipe routing and Supporting
Attending Site query

Senior Piping Designer (In PT Technip Indonesia from Nov.2006 – April 2009) :
ETSS project of Process Platform for Connoco Philips Indonesia.
In the position of Senior Piping Designer, involved in
Reviewing Vendor Drawing of Vessels, Packaged Systems, Pumps etc.
Supervision of PDMS Equipment Modelers and Assisting in Layouts.
Inter discipline Checking and Information.
Reviewing of P&I’d, Marking up the changes and Checking Pipe routing.
Incorporation of Clients comments in PDMS Model and Isometrics.
Final Isometric Drawing Checking, for issuing to Clients.

Piping Retainer-MTF (In BecRel Engg. Private Ltd. Mumbai for their Jamnagar Refinery Expansion Project) from April 2006 to November 2006 :
In the position of Piping Retainer – for Marine Tank Farm Storage & offloading Area, involved in
Assistance for MTO group.
.Site Survey of Existing MTF area for New Pipe way for transportation of finished products for offloading.
Preparation of Site survey sketches for client’s approval and issuing for PDS designers.
Tie-in preparations of existing and new Product lines for offloading.

Senior Piping Designer in Worley-Parson Arabia, Abu Dhabi from Aug. 2005 to Feb. 2006 :
Topside Modifications in Wellhead Platforms for ADMA-OPCO Abu Dhabi.
Site Survey and Preparation of sketches.
Assistance to Designers and Checking.
Inter Discipline Checking and New Piping weight calculation for Structural Department.

Drafting Team Leader in National Petroleum Construction Company, Abu Dhabi from May. 1993 to July. 2005 :
AS Drafting Team Leader in Detail Engineering, Construction & AS-built of the following projects :
Assistance in Material Estimation for Contracts department in Bidding for new Jobs.
Detail Engineering of Reinstatement of US-94 Wellhead platform- EPC project .
Detail Engineering of 30” MOL New Pipeline from Offshore New Gathering and launching platform to Das Island Receiving, separation, storage and offloading-EPC project.
30” Firewater Ring headers and fire Hydrants for Storage facilities in DAS island –an EPC project
Fabrication of Process platform for ADMA-OPCO, QGPC, SOUTH PARAS-IRAN and many more –Construction Engineering work.
Sent to assist Construction and Erection team as temporary Field Engineer- for ZWSC platform on 30” New MOL project for ADMA-OPCO.

Piping Designer in Technip Geo Production, Abu Dhabi from Dec. 1992 to Apr.1993 :
Laying out three, 48” Gravity MOL from ON shore Tank bund to Offshore storage & offloading facilities of ADMA-OPCO Abu Dhabi.

Piping Designer (Design Specialist) in SCADO-LUNNUS CREST ENGG. Co., in Saudi Arabia from Dec. 1991 to Dec. 1992. :
Saudi Aramco Onshore Maintain potential pipeline consists of Trunk line, Flow lines, GOSP header extension.
Water Injection Lateral & header Extension
Sr. Piping Draughtsman in Udhe India limited, Bombay, from Oct.1988 to Mar 1991.
Study of P&I’d, Preparation of Piping Plan & details, Nozzle orientation of Equipment & Tank drawings, Releasing Civil Information and Checking of Isometric Drawings for M/s GUJARAT STATE FERTILIZER COMPANY, Caprolactum project.
For M/s FINOLEX LIMITED- Ethylene unloading &Storage, Utility lines.
For M/s GACL-Chlorine Liquefaction and Evaporation.

Senior Designer / Draftsman (In Shrishma Fine Chemicals & Pharmaceuticals Ltd., Bangalore-India, From Mar 1987 to Apl 1988) :
Project : Aspirin, Methyl Salcylate
Assistance to Project Engineers- Process, Mechanical, Civil & Electrical in Preparation of Equipment Layout, Flow diagrams, Piping Layouts, MTO, etc.,

Design Supervisor (In Graphite India Ltd., Bangalore-India, From Dec 1979 to Mar 1987) :
R & D Projects
Design, Drafting, Estimation and Purchase order Preparation for Procurement of Materials and Equipments for various R&D projects.-Gravitational Flow Extrusion process, New Pilot plant Equipment Layout. Etc.,

Design Draftsman (Mechanical) : (In Chowgule Engineering Co. Pvt. Ltd., Goa--India, From Jan 1979 to Dec 1979)
Design Draftsman (Mechanical) :(ACC-VICKERS BABCOCK LTD., INDIA from May 1976 to Dec 1979)
Design Draftsman (Mechanical) :(In ANDHRAPRADESH ELECTRICAL INDUSTRIES LTD., VIZAG-India, From Nov 1973 to Dec 1975)
Design Draftsman (Mechanical) :(In MYSORE ELECTRICAL INDUSTRIES LTD., BANGALORE-INDIA from Dec. 1971 to Mar 1973)

Education :
DIPLOMA IN MECHANICAL ENGINEERING (DME) from Karnataka Poly Technic Mangalore.
Section A of AMIE (INST.OF ENGINEERS INDIA)

Training Courses :
AutoCAD 2000 - 2006
PDS (in house training)-Model review
PDMS -12.0 –SP5
MDS & SPS
Stress Analysis, using CEASER II programme.

Contact Details
E-mail : rama.su.1950 AT gmail.com
suresh_somayaji2000 AT yahoo.com

Date required for Joining : 30 days
Last Salary : USD 6000/ month. + Acc. + Food +Transportation.

Expected salary : as per company salary structure.

[Unregistered]

Raghunatha reddy.C
Role : Piping Designer
Email id : raghuchinna346 AT yahoo.co.in

Bachelor Degree in Mechanical Engineering with 5 years of experience in Power Plant and Oil & Gas, Chemical which includes Preparing, Over all Plot plans ,Unit plot plans, Piping layouts, Modeling of Equipments and Piping, Internal team Co-Ordination, Generating Reports like Bill of Materials.

Educational Qualifications :
- Full Time Bachelor Degree Course in Mechanical Engineering from JNT University (2007). SVITS Engineering College, Mahaboobnagar.

Experienced Responsibilities :
- Design & Detail Engineering of Overall plot plans, Piping layouts, Sections & Details.
- 3D Modeling of Piping & Equipments using PDMS Software Package.
- Extracting Piping GAD`s from the PDMS Module using Draft Module.
- Preparation of Preliminary MTO By using P & ID.
- Preparation of detailed piping route designs.
- checking all detail design drawings before submitting for approval.
- Material selection and specifications.
- Familiar with relevant piping codes and standards.
Software Skills :
1. PDMS Versions 11.6,12 SP3.
Working Extensively with Aveva’s - Plant Design Management System (PDMS), high-end,3-Dimensional Plant design software since five years and specialized in all the modules.
Other software : PDMS, Auto CAD, Micro- Station.
Current Employment : M/s Anewa Engineering Pvt Ltd.

Work experience :-
2. Working as PDMS Piping designer for M/s. Anewa Engineering Pvt. Ltd.
. Anewa Engineering Pvt. Ltd. is an ISO certified engineering software Solution Company, providing design and engineering services related to the industrial plant like Simple cycle, Co-gen & Combined Cycle Power & Process Plants markets in India and Abroad.
3. Worked as PDMS Modeler for M/s. BHEL, HYD, AP.
Tebodin's expertise and skills allow for fast-track project delivery. Through the application of high-end design tools such as PDMS, successive design and engineering phases can be integrated. In this way a new plant or facility is made operational in the shortest possible time.

Last year I deputed to Tebodin & Partner LLC (Oman). I worked there Amin water injection development project. In this project I have done 3d modeling. We used 3d software is PDMS(Version is 12sp3).In this project input is crude oil from wells, the crude oil from well to receivers, from receivers to Free water knockout tanks. In this tank the crude oil is separated into water, oil, gas. The water is from tank outlet to water injection pumps. The water injection pumps outlet water is going to pig launchers. The crude oil is tank outlet to emulsion pumps. Emulsion pumps to pig launchers. The gas from tank outlet to going to knock out drum. The Wastage gas is going to flare.

Indulged with Following ProjectsS :
PROJECT#1 :
Client : Petroleum Development Oman.
Project : Amin water injection development project
Muscat (Oman).
Software’s used : PDMS 12sp3, Auto cad.
- Over Plot Plan & Unit plot plan studying.
- Equipment Layout studying.
- Involved in studying and updating the P&ID’s.
- Routing of Pipes as per the system requirements using P&ID’s.
- 3D Modeling of Equipments, Piping routing.
- Extraction of Isometrics using Isodraft.
- Extraction of Orthographic Drawings using Draft Module.
- Bill of Materials.

PROJECT#2 :
Client : Great Eastern Energy Corporation Ltd.
Project : Booster Compressor & GGS Phase-1 Expansion.
Sasol (W.B), INDIA.
Software’s used : AutoCAD & PDMS 11.6.
- Plot Plan studying.
- Equipment Layout studying.
- Involved in studying and updating the P&ID’s.
- Routing of Pipes as per the system requirements using P&ID’s.
- 3D Modeling of Equipments, Piping routing, Civil and structural, Cable Trays, HVAC & Support Modeling.
- Extraction of Isometrics using Isodraft.
- Extraction of Orthographic Drawings using Draft Module.
- Bill of Materials.

PROJECT#3 :
Client : M/s Petroleum Development Oman.
Project : Gas turbine power plant (1x126MW).
Software’s used : AutoCAD & PDMS 11.6.
- Plot Plan studying.
- Involved in studying and updating the P&ID’s.
- Routing of Pipes as per the system requirements using P&ID’s.
- 3D Modeling of Equipments, Piping routing, Civil and structural, Cable Trays.
- Extraction of Isometrics using Isodraft.
- Extraction of Orthographic Drawings using Draft Modeling.
- Support Designing and Detailing.

PROJECT#4 :
Company : BHEL Ltd., Hyderabad.
Project : M/s GSPC PIPAVAV POWER COMPANY LTD.
2X350MW,GT,Gujarat.
Software’s used : AutoCAD & PDMS 11.6.
- Plot Plan studying.
- Equipment Layout studying.
- Involved in studying and updating the P&ID’s.
- Routing of Pipes as per the system requirements using P&ID’s.
- 3D Modeling of Equipments, Piping routing, Civil and structural , HVAC & Support Modeling.
- Extraction of Isometrics using Isodraft.
- Bill of Materials.
- Support Designing and Detailing.

PROJECT#5 :
Company : MANGALORE REFINERY & PETROCHEMICALS
LTD.
Project : CAPTIVE POWER PLANT,PHASE-III REFINERY
PROJECT, MANGALORE.
Software’s used : AutoCAD & PDMS 11.6.
- Plot Plan studying.
- Involved in studying and updating the P&ID’s.
- Routing of Pipes as per the system requirements using P&ID’s.
- Preparation of Material Take Off.

Personal Skills :
- Comprehensive problem solving abilities.
- Good communication and interpersonal skills.
- Ability to deal with people diplomatically.
- Willingness to learn.

Personal details :
Name : C.Raghunatha reddy.
Date of birth : 6th MAY 1985.
Father’s name : C.Venkata siva reddy.
Marital status : Married.
Language known : English, Hindi, Telugu.
Hobbies : Cricket, Listening to music.