www.autorobinc.com Automotive Robotics India Pvt Ltd Chennai : PRO-E Design Engineer

[muthukalee]

Design Engineer / PRO E

Location :Chennai

Desired Candidate Profile :

* Proficient in Pro-E
* Sound knowledge of various manufacturing processes and assembly operations
* Good knowledge of GD&T, Welding processes and welding symbols
* Good Communication Skills

Job Description :
To design and develop mechanical components for large earth moving equipment

About us :
Automotive Robotics is serving customers in the areas of Electronics, Embedded Integration, Product Development, Engineering Design and Manufacturing Services. The Company is headquartered in India with office globally in USA. Through the development centre in Hyderabad, the company is well positioned to offer customers the established benefits of off-shore outsourcing. We have a proven track record of solving integration challenges and providing engineering and software development expertise to supplement internal teams.

Contact us :
Automotive Robotics (India) Pvt. Ltd.
A & B Block, IV Floor,
Surya Towers, S.P. Road,
Secunderabad-500003, INDIA
Phone : 91-40-30280431
Fax : 91-40-66313122
info@autorobinc.com.
http://www.autorobinc.com

[Guest-IJT]

RESUME

A.SREEDHAR REDDY. E-mail: [email]vsree7345@gmail
Ph No: 09949337130.

Career Objective:
I hanker to enter into a profession that is challenging and exacting. Having a passion for Problem Solving, I would like to apply technology in innovative ways to solve problems in a better way, manage everything effectively and efficiently and improve the quality of human life.

Educational Qualification:
D.M.E GOVT POLYTECHNIC 2003 61% GUDUR.
SSC ZP.HIGH SCHOOL, 2000 70% CHENNUR.

Experience
Company : NELCAST LTD.
Position : Sr DESIGN ENGINEER.
Duration : 7/03 to 01/08.
Used soft wares : Auto cad -2006,
Pro/e (wildfire-2&3),
Master cam.
SOFT CAST(GATEING)

Company : SHINANO DIGI ENG PVT LTD.
Position : PROJECT LEADER.
Duration : 1/08 to TILL DATE.
Used soft wares : Auto cad -2006,
Pro/e (wildfire-2&3),
UNIGRAPHICS (NX5)

NELCAST Company profile
NELCAST is one of the largest sg iron casting manufacturing foundry started at 1982 in Gudur . It citified as QS9000./TS16949. It’s have customers in all over India, USA and Australia .NELCAST supplies .Raw Castings and mechanized castings for automobile industries.

Some customers
- Ashosk ley land
- Tata motors
- Meritor
- Sigma
- Dobbie dico
- Rane-TRW
- Tafe
- Rsb Transmissions
- Rail ways

SDE Company profile
SHINANO DIGI ENG PVT LTD is joint Venture with komatsu (Japan). In this company
We are doing 3d modeling for earth moving and auto mobile components and monitoring the patterns manufacturing process.

Skills in pro/e & ug softwares
- prepare 3D castings models from 2D costumer drawings.
- Analyzing the models for pattern making(methoding).
- Prepare the pattern 3D models(with drafts and all).
- Extract Core from 3D model with pro mould tools & prepare core box models.
- Create assembling models for core setting &drill jigs, fixtures.
- Generate the final pattern &core box drawing form 3d model.

Skills in Auto Cad designing
- Create 2d in house drawings for production used equipments.
- Create match plate layout drawings for mounting patterns.
- Create plant layouts.

Others skills
- Study the mechanized or casting drawings received from the costumer.
- Prepare estimations for developing cost.
- Casting & patterns dimensions layout inspection with measuring equipments.
- Cnc (vmc) machine operating.
- Program generating for model in master cam software.
- APQP, FMA documents preparation.
- Analyzing the gating layout metal flowing with 3d model in autocast software.

Some Projects
MODEL NAME COUSTMER DURATION
- RA109 Carrier Tata motors 12days
- 17X Carrier Meritor 15 days
- Front engine support Tafe 5days
- Front axle housing Tafe 6 days
- Gear box housing Tata motors 4days
- 177 Mani fold Rsb transmissions 6days
- Cylinder block komatsu (Japan). 30 days
- Oil pump housing komatsu (Japan). 10 days

Soft wares known
- Packages : MS Office.
- Mechanical Software packages : Auto cad -2006
Pro/e (wildfire-2&3)
UG (NX5)
CATIA V5 R16
Master cam

M/c operating known
BFW (VMC)

Profile:
- Honest, Humble, Sincere and a Hard Worker with a high level of Integrity.
- Eager to learn new things.
- Strong interpersonal skills and ability to work as part of a team
- Strong innovative, analytical and design skills
- Motivation towards the work.
- Self-starter who can work independently and handle multiple priorities and deadlines.
- Sense Of responsibility

Other activities
- Received certificates in NCC, Sports, and General Knowledge.

Personal Profile:
Name : Sreedhar reddy. A
Father’s Name : Ramachandra reddy . A
Date of Birth : 01-06-1985
Gender : Male
Nationality : Indian
Marital status : single
Mother Tongue : Telugu
Languages Known : English, Telugu and Hindi

Communication Address : c/o A.Venku reddy,
kapu street,Chennur,
Gudur, Nellore
A.P. 524406

(SREEDHAR REDDY.A)

[Guest]

R.SUNDAR BABU
Mail Id : sundarbabu.r AT gmail.com

OBJECTIVE :
Seeking a Challenging position in your organization where my analytical skills and comprehensive education would be fully utilized and further developed for professional and personal growth.

ACADEMIC CREDENTIALS :
- B.E – MECHANICAL ENGINEERING
St. JOSEPH’S COLLEGE OF ENGINEERING, CHENNAI

Course Specialization : MECHANICAL ENGINEERING

Board/University : ANNA UNIVERSITY
Year of Passing : 2009
Aggregate : 69.00%
Class Secured : FIRST
- DIPLOMA IN MECHANICAL ENGINEERING (D.M.E)

Institution : Panimalar Polytechnic College
Board/University : DOTE
Year of Passing : 2006
Aggregate : 76%
Class Secured : FIRST
- SECONDARY EXAM – X

Institution : Velankanni Matriculation Higher Secondary School.
Board/University : MATRICULATION
Year of Passing : 2003
Aggregate : 76.00%
Class Secured : FIRST
TECHNICAL SKILLS :
American Society of Non- Destructive Testing ASNT Level II in
o Penetrant testing
o Magnetic particle testing
o Radiographic Testing
o Ultrasonic testing.
SOFTWARE SKILLS :
2D Drafter : Auto CADD
3D Modeling : Pro-E
WORK EXPERIENCE
Working as Design Engineer in BHANU FAB BELLS Pvt. Ltd. From August 2009 to till Date.
BHANU FAB BELLS Pvt. Ltd. They are engaged in structural Fabrication, and Erection of Oil Storage Tanks, Vessels, Pipelines, Etc.
My Key responsibilities includes
o Project Analyzing
o Drawing Analyzing
o Layouts and Template Marking
o Welding Methods and its Selection
o Carrying out NDT Inspection of (RT, UT, PT & MPI) and weld visual inspection during and after welding Process.

[Guest]

CURRICULUM VITAE
MANESH.T.R
E-mail : manu5487 AT gmail.com
manu5487 AT yahoo.com
CAREER OBJECTIVE
To secure a challenging position where I can effectively contribute my skills as a Technical Professional, possessing competent Technical and Designing Skills. With the aid of my experience I always try for the perfection of my work.

EDUCATIONAL & TECHNICAL QUALIFICATIONS
- Certificate Course in Master in CAD/CAM from MSME Central Tool Room Training Centre, Bhubaneswar, Orissa in 2009
- Diploma in TOOL and DIE ENGINEERING from Board of Technical Education Kerala.Secured 79.57% marks in final year examination in April 2007.
- Higher Secondary Certificate (Science) from Board of Higher Secondary Education Kerala.Seccured 67% marks in final year examination in March 2004.
- Secondary School Leaving Certificate from Board of Public Education Department Kerala.Secured 86.83% marks in public examination in March 2002.
EXPERIENCE DETIALS
From the start of my professional career to my present job, that is for a span of 3 .7 years. Now I am working as a DESIGN ENGINEER. I have been working as “TOOL MAKER cum PRECISION TOOL ROOM MACHINIST” in different companies and environments. During this period I have gained whole range of skills and techniques to plan and execute wide range of products given to me.
COMPANY
Employer : Entyme Consultancy (CAD/CAM solution provider)
Rash Behari Avenue, Chandannagar, Hooghly, West Bengal
Period : 23rd Nov 2009 to till date
Designation : Design Engineer
COMPANY PROFILE
Entyme Consultancy is a project based firm. Here specialized in outsourcing of 2D drafting, 3D modeling and Analysis of various components related to Steel Industry, Railway, and Jute Machineries for customers like ISPAT Industries, Texmaco Ltd, TWL, GPI, ITC Ltd, MGM Rubbers, Engineers Incorporated etc..
DUTIES & RESPONSIBILITIES
- Create model from 2D drawings.
- Generate the drawing views of 3D model.
COMPANY
Employer : Cochin Dies & Moulds Pvt Ltd,
Industrial Development Area, Athani, Thrissur, Kerala.
Period : 19th Dec 2007 to 30th June 2009
Designation : Tool Maker cum EDM Section in charge.
COMPANY PROFILE
Cochin Dies & Moulds Pvt Ltd is the first ISO 9001-2000 Certified Tool Room in Kerala.Here specialized in design, manufacturing, and trouble shooting of Injection Moulds, Blow Moulds, Compression Moulds, Hot Runner Moulds like Automatic and Semi Automatic moulds.
DUTIES & RESPONSIBILITIES
- Process planning for the job.
- Selection of materials, machines, tools and measuring instruments.
- In-process inspection by using related measuring instruments.
- Routine and preventive maintenance of machines.
- Electrode designing for EDM.
COMPANY
Employer : Libra Engineering Works,
Edappally, Cochin-24, Kerala.
Period : 15th June 2007 to 15th Dec 2007
Designation : Tool Maker (Trainee)
COMPANY PROFILE
Libra Engineering Works , is a commercial Tool Room specialized in design, manufacturing, trouble shooting of injection moulds, Press tools and high accuracy job works for the customers like OEN FCI, NPOL, BRAHMOS, ISRO
DUTIES & RESPONSIBILITIES
- Preparing AutoCAD drawings.
- Process planning for the job.
- Preparing inspection report for the manufactured item.
- Operating all kinds of conventional machines.
- Involving in mould making.
SOFTWARE KNOWLEDGE
- Auto CAD 2008, 2009 & 2010
- Pro-Engineer wildfire 4 & 5
- Solid Works 2009 & 2010
STRENGTHS
- 2D drawing & 3D modeling using low and high soft wares.
- Experience on project based drawing works.
- Ability to handle Technical drawings.
WEAKNESS
- I have lot of patience to try something until getting the result.
- I always thing positive.
ACHIEVEMENTS
I have achieved A, B & C Certificates from the Army Wing N.C.C Senior Division. I also spend five years with N.C.C.

[Guest]

S.MARIMUTHU
- vvbmuthu AT gmail.com

Synopsis :
Mechanical Engineer with around 3 years of experience looking for challenging, innovative and multi-faceted work assignments.
Key skills :
- Auto-cad & Pro-E Knowledge
- Communication & presentation skills,knowledge in " GEOMETRIC DIMENSIONING AND TOLERANCING"
Work experience :
- Since, June-10 Project Engineer, Kalpataru Power Transmission Ltd,Aurangabad Zone(MSETCL)
Latur,Maharastra.
- Jul’09-May-10 Project Engineer, Kalpataru Power Transmission Ltd,Vadinar-Hadala line(GETCO)
Jamnagar, Gujarat.
- June’08-June’09 Design Engineer, Sand fits Foundries Pvt. Ltd , Coimbatore.
Kalpataru Power Transmission Ltd - KPTL is a Leading Turnkey Player in Power (Transmission - India and
Overseas / Generation / Distribution / Construction), Infrastructure (Oil & Gas Sector / Railways / Building &
Factories / Roads & Bridges) and Asset Creation (Transmission System / Roads / Logistics & Warehouse),
Having their presence all over India and more than 30 countries globally.
KPTL is the Kalpataru group’s listed entity and continues to look for development projects in various
Infrastructure sectors. The company is currently executing / supplying to several customers in Africa, the
Middle East, Far East, Australia, USA & Canada.
Key responsibilities :
- All type of tower erection handled in site.(132kv,400kv)
- Detailed checking of erection drawing and foundation drawing.
- R.O.W Problem and site work issue are handled in our site.
- Line inspection and manage the site level issue.
- Co-ordinate and interact with management level and sub-contractor.
- Bill of materials checking and inspection of tower erection
- All type of soil foundation are handled in our site .
Sandfits Foundries Private Ltd : One of the leading foundries in South India was started in 1962 at Coimbatore, primarily to cater to the captive needs of the local industry. Early in our inception, We carved a unique business model to success.
Most of the casting produced at our manufacturing plants are being machined at our excellent in- house machine shop, which offers good facilities to meet the strict quality requirements of auto majors , Wind mill manufacturers, Housing, Rotor hub, Valve Bodies and Heavy engineering industries.
Key responsibilities :
- Design and analysis activities using CAD System (Pro-E, and AutoCAD).
- Verify and validate design for manufacturability, functionality and reliability.
- Carry out theoretical & mathematical calculation related to design.
- Creation of solid models using Pro-E(WF 3.0)
- Integration of detail components into assemblies, performing checks for interfaces in terms of forms, fits and functions.
- To Rise The Indent For Bought out Components Using MMS
- Provide creative ideas to enhance look & feel, functionality, cost, manufacturability, durability and ruggedness.
- Involve in various manufacturing processing activities (Pressing, Welding, Painting, Assembly etc).
Projects handled :
- Av Tec casting following in foundry section.
- L&T casing and TAFE items followed in Quality section.
Academic credentials :
- Apr’05 – Mar’08 - B.E (Mechanical Engineering), First class (76%) from MNSK college of Engineering, Pudukottai.
- Apr’02 – Mar’05 - Diploma in Mechanical Engineering, First class with Honors (83 %), Govt. Polytechnic College, Coimbatore.
Academic projects :
- Engineering Project :
Area : Robotics
Topic : “FABRICATION OF PICK AND PLACE ROBOT”
- Diploma Project :
Area : Automobile.
Topic : “HIGH SPEED INDICATION AND AUTOMATIC BREAKING SYSTEM”
Software proficiency :
- Operating language Windows XP, Vista
- Microsoft package Word & Excel
- Modeling software Pro-E
- Drafting software Auto-CAD

[Guest]

CURRICULAM VITAE

Sk.Silarbabu
Email :silar.sf3226 AT gmail.com
_______________________________________________________________________________
CAREER OBJECTIVE :
To secure a challenging position in a globally competitive environment where I can effectively utilize my skills and abilities for the professional growth by contributing to the organizational goals.

ACADEMIC PROFILE :
S.No Name of Degree Institution Board/ University Year of study % of Marks
1 B.TECH (Mechnical Engineering) Nimra College of Engg. & Tech., Vijayawada. Jntu University, Kakinada 2006-10 61
2 Intermediate-MPC Chitanya jr.college Board of Intermediate 2004-06 78.8
3 S.S.C Skynm Z.P.High school Board Of Secondary Education 2004 83

TECHNICAL SKILLS :
Programming Languages : C, Java , Auto cad,Pro-Enginering

PERSONAL SKILLS :
- Positive attitude and confidence in executing things
- Adaptable to any kind of environment with learning aptitude
- Quick learning ability
- Helping nature & friendly natrure

PROJECT REPORT :
- ELECTRICAL POWER GENARATION USING RAILWAY TRACK
Abstract :
In this project we are generating electrical power as non-conventional method by simply running on the train in the railway track. Non-conventional energy system is very essential at this time to our nation.N0n-conventional energy using railway track needs no fuel input power to generate the output of the electrical power. this project using simple drive mechanism such as rack&pinion assemble and chain drive mechanism.
EXTRA CURRICULAR ACTIVITIES :
- Organized various cultural activities at college festival
- Participated in ppt held by PERCEPTION10 in our college
- Actively participated in school drama

[Guest]

RESUME
SRINIVAS JUVVALA
E-Mail :srinivas.juvvala009 AT gmail.com

CAREER OBJECTIVE :
To pursue a challenging career in an organization that utilizes and enriches my technical and personal skills.

ACADEMIC DETAILS :
- Diploma in Mechanical Engineering from Dr.B.R.A.G.M.R polytechnic COLLEGE,RAJAHMUNDRY Under S.B.T.E&T HYDERABAD (2005-08)
Percentage : 66.89%

- S.S.C from Tagore convent E.M High school, Kakinada, East Godavari A.P (2004-2005).
Percentage : 73%
PERSONAL SKILLS :
- Good communication skills and interaction ability
- Adaptable to any environment.
- Self motivation.
- Willing to work in a group.
- Smart worker.
Professional Experience :
- Worked as Operating Trainee Engineer from 7 May 2008 to 6th May 2009 in Victor Gaskets India ltd(Anand Group of Industries), Pune.
- Worked as Engineer from 6th May 2009 to 9th Sep 2010 in Victor Gaskets India ltd (Anand Group of Industries), Pune.
- Currently working in TACO HENDRICKSON SUSPENSIONS PVT LTD (TATA AUTO Comp Group), Pune, as a Supervisor in Operations from Sep9th 2010 to still now.
JOB PROFILE :-

- Handle all activities of Engineer’s confidently.
- Knowledge of Pneumatic and Hydraulic press machine operating.
- Inventory control as per production planning.
- Production as per Target with quality of product with reduce lead time &in process rejection
- Also monitoring control in process& quality improvement.
- Record keeping of daily production.
- Knowledge of TPS, PPM, QMS.
- Maintaining of QA, TPM, and 5S with production
- Customer complaint handling
DECLARATION :
I here by declare that the details furnished above me are true to the best of my knowledge and genuine.
(SRINIVAS JUVVALA)

[Guest]

RESUME

Narendhar chirumalla,
E-mail : narendertarun AT gmail.com

OBJECTIVE :

To work in a challenging environment that encourages continuous learning and creativity, provides to new ideas and stimulates personal and professional growth. To become a member of the Team that believes in creative and productive work.
EDUCATIONAL QUALIFICATIONS :
1. BACHELOR OF TECHNOLOGY : IN MECHANICAL ENGINEERING from vardhaman college of engineering,Hyderabad.affilated to Jawahar lal Nehru Technology University (2006-2010) with 70%
2. Intermediate : (12th) in Mathematics, Physics and Chemistry from
Ratna Junior College, Hyderabad, Osmania University (2004-2006).with 59%
3. Secondary School Certificate (10th) from Vidya dayini Model High School (2004).with 57%
TECHNICAL SKILLS :
1. Operating System : Windows 2000/XP
2. Packages : MS Office, Auto CAD,CATIA,PRO-E
PERSONAL ATTRIBUTES & ETHICS

Honesty, hard work and versatility are part of me. My personal work habits and permits me to be an efficient and well organized team player will strive to do the best to promote the interest of the employer.
STRENGHTS

My strength include excellent inter personal communication skills Optimistic, ability to work hard for long hours. Adaptable to new environments, unquenching thirst for knowledge. Can grasp new subjects and skills fast, maintain, good interpersonal relationship. Strong desire and drive to achieve the goal whatever the adversities.
ACHIEVEMENTS AND SEMINARS ATTENDED :

1. Presented a seminar on “Flexible Manufacturing System” in technical seminar.
2. Presented a seminar on “Lean manufacturing.” in technical seminar.
3. Secured 100% attendance during Graduation.
4. Secured class wise prize in science fair in Tenth standard.
PROJECTS :
1. MiniProject was done at ASL (Advanced System Laboratory) Ravirala Hyderabad.worked on “STUDY AND TEST ON COMPOSITE MATERIALS”
2.Main Project was done at CAD Technologies Kukatpally Hyderabad. worked on “DESIGN AND ANALYSIS OF SPUR GEAR”.

DISCLAIMER :
I here by declare that all the particulars and details provided by me above are correct to my knowledge.

(NARENDHAR)
Place
Hyderabad.

[Guest]

SHANMUGAM.T
E-mail : shanmugamtharani AT gmail.com

CAREER OBJECTIVE :

To accept a challenging position in a reputed organization which would bring out the best in me where commitment, hard work and proven abilities lead to an assured growth.
WORK EXPERIENCE :
1, Mod Forge Pvt Ltd.
- Designation : Product Head
- Experience : 31st July 2009 To 31st Nov 2011
- Functional Area : a, Qualiy Engineer : for Forging Div- Quality Engineer
From Aug’09 to Oct’09
b, Design Engineer (Product Head) : for Forging and
Machining Div from Nov’10 to Nov’11
- I Undergone Training on Production Part Approval Process (PPAP) – 4th Edition Conducted by Indian Register Of Shipping Industrial Service (IRS) in
Ashok Leyland Ltd - Ennore
2, SANJANA Metal Ware India Pvt. Ltd
- Designation : Design Engineer
- Experience : Since 05th Dec 2011 ( Till Date )
Responsibilities :
In Design :
- Receiving the Customer Drawing and transforming into forging drawing as per Standards & Customer requirement
- Detailed analyzing of the Customer Drawing, before it taken into the process
- Prepare a Model drawing and also design the Die & Tools for Forging & Sheet metal Components
- Display Detailed view of Designed Model with exact GD & T
- First piece sample approval for the newly designed component
In Quality :
- Quality Inspection for Incoming & final jobs,
- Involved in New Product developments,
- Preparation of PPAP, ISO, TS16949 : 2009 Documents
- Monitoring & conducting Periodical Audit to improve the supplier quality Rating
- Kaizen Implementation in the Process
- Reducing of reworks by explaining their work technically in clear manner
- Knowledge in TS16949 Records, Documents & also having experience in TS Audit.
COMPANY PROFILE :
Company Name : Mod Forge Pvt. Ltd
- We are the Manufactures & Supplier of all Forging, Machining, Flanges& Fasteners components
- Our company is Certified by ISO & TS16949 : 2009 Quality management Systems
OUR MAJOR CUSTOMERS :
a, RANE Madras Ltd, Ashok Leyland Ltd, BHEL, BEML, Axles India, TAFE, TIDC, Greaves Cotton, ELGI Equipments, Wheels India etc .,
EDUCATION QUALIFICATION :
DEGREE
INSTITUTE
UNIVERSITY
YEAR OF PASSING
AGGREGATE
(%)
B.E., (Mechanical Engineering)
ST.PETER’S ENGINEERING COLLEGE
ANNA UNIVERSITY
2006-2009
79.45%
(3-8 Sem)
D.M.E., (Diploma in Mechanical Engineering)
DR.M.G.R. POLYTECHNIC COLLEGE
DIRECTORATE OF TECHNICAL EDUCATION
2003-2006
85.46%
(3-6 Sem)
10th Standard
BHARAT MATRICULATION HR.SEC. SCHOOL
MATRIC
2003
60.7%
CORE SOFTWARE SKILLS SETS :
- MODELING SOFTWARE KNOWN : AUTOCADD, Pro-E WF 2.0 & 4.0
CATIA P3 V5 R17

- ANALYSING SOFTWARE KNOWN : ANSYS 10.0
PROJECT DONE :
- Solar Power Storage System
- Automated Guided Vehicle (AGV)
- Design & Flow Analysis of Engine Coolant Pump using CFD (Computational Fluid Dynamics)
PERSONAL STRENGTHS :
- Very flexible & sincere in work.
- Effective leadership, meanwhile a good team player.
- Always willing to learn.
INPLANT TRANING UNDERGONE :
- Chennai Port Trust, Chennai
- Integral Coach Factory (ICF), Chennai
- Parthiban Engineering Works, Vellore
ACHEIVEMENTS :
- Won FIRST PRIZE in Pro-E Modeling and Animation held at VIT University conducted by Society of Automotives Engineers (SAE)
- Won FIRST PRIZE in Pro-E Modeling and Animation held at St. Peter’s Engineering College Conducted by Society Of Automotive Engineers (SAE)
- Secured DEPARTMENT THIRD PLACE in ANNA University 7th sem examination
- Secured DEPARTMENT SECOND PLACE in THERMAL ENGINEERING in DIPLOMA under DOTE (Directorate of Technical Education)
I hereby declare that the information furnished above is true to the best of my knowledge and belief.
PLACE: Chennai
DATE : (SHANMUGAM.T)

[Guest]

K.V. GOPALA KRISHNA
E Mail kanura.gopal AT gmail.com , Kanuru_k AT rediffmail.com
________________________________________
Seeking assignments in Project Management/Design Engineering with an organization of repute; preferably in the internal combustion Engines (Diesel)/Automobile power train &Body industry
________________________________________
AREAS OF STRENGTH INCLUDE
- A dedicated professional with over 12 years of qualitative and enriching experience in project management, design engineering, quality, testing, Assembly and inspection in Engines with application of automobile sector& industrial diesel engines.
- Presently working with Satyam venture engineering services(Automotive) - specialist
- Adept in managing the entire engineering operations involving product development and co-ordination with internal department.
- Proven skills in managing design operations for internal combustion engines.
- Well versed with Materialogy instruments such as Bore Gauges, outside Micro Meters, inside Micro Meters, Vernier Calipers, etc.
- Exposure to engine testing at various loads of operations and with engine assembly
- Experienced in Visvsa ,Gd&t and Tolerance stackup analysis and in Unigraphics,catiav5 software’s in applications with automotive design
- Demonstrated experience in executing various projects for reputed organizations
- Excellent relationship management & negotiation skills.
CAREER FEATURES
From May’07 to present date : Satyam venture engineering services (Automobile)
Specialist
- Executed iwis projects with engine components like guide rails, liner and housing withcatiav5r16
- Attended training programs in Six sigma .iso qms, Supplier development, visvsa and CATIAv5
- Worked in engine related exhaust system project in visvsa (Stack up analysis) software
Delphi tolerance stack up analysis project is related with engine exhaust manifold maniverter assembly. And the Process is analyzed for the pencil brace location.
Considering the assumptions from cad input drawings and with the jt files the process is analyzed with the application of Gd&t and with the assumptions of Assembly fixtures and the contributors between the parts of exhaust manifold, exhaust manifold flange, shell flange, shell, end cone, outlet flange which is located with the pencil brace. Finally the measurements are made with respect to the nominal part.
- Executed the Projects with intake manifold for ford engine of v-8 configuration and Interactions with the Engine testing and calibration activates as per the origination requirements.
- Executed Project leader responsibly with iwis&webato projects in the area of vehicle power train &Body.
- Worked in Chrysler GD&T project in the area of dimensional engineering with the software’s unigraphics nx5 and catiav5r16&18 /3DCS for a period of 2 years 6 months.
From Mar’06toMay15th07 (1year3months) : Pricol Technologies
Deputy Manager (Automobiles)
- Monitored the overall engineering operations pertaining to Engines/Power train in applications with automobiles oems Tata motors for engine management system module and Promec automotive&Carcerano (ITALY).
- Attended Training program in automobiles in Europe (ITALY)
May’01 to Feb’06(4years9months) : Group of engineer’s
Sr Engineer (Automobiles)
- Worked in several assianignments with Quantech global services,learcorp,onward technologies in UG software through Group of engineers
- Resourcefully executed the project with Automotive and in the area of commercial vehicle chassis frame assembly (M&M).
Jul’ 96 to May’01(4years10months) : Wartsila India Limited
Engineer

- Administered the complete engine management operations and Development concepts on Internal Combustion Engines.
- Experienced in common rail diesel injection system on 12v 32 wartsila diesel Standard engines
- Executed the project for low Nox Engine design with common rail
- Design considerations with respect to the fuel injectors pressure
- Optimization of fuel consumption with common rail system
- Successfully handled engine parts before assembling (Diesel Engines) & Systems
- Monitored quality inspections viz comparing Tolerances of various parts after assembling of various parts such as Crank Shaft, Piston etc with existing drawings.
- Executed various project with details of drawings such as Engine related systems
o Starting Air System
o Fuel System
o Cooling System
o Exhaust System& Lube Oil System
o In applications with Engines (High & Medium speeds) like Cummins, Wartsila companies.
Commenced career with CUMMINS INDIA LIMITED
Engineer;
Jul’94 to Jul’96(2years)
- Worked in the area of diesel engines of various models (n series, v series, k series) in applications with portfolios like stationery, marine and automobile b-series and c-series engines.

ACADEMIC CREDENTIALS
1994 : Bachelor of Engineering (Mechanical)
University of PUNE, INDIA

[R SRINIVASAN]

SRINIVASAN R
ravisrinivasan0 AT gmail.com
CAREER OBJECTIVE
To adapt myself in an environment where I can innovate and contribute new ideas for the company which will enable my technical knowledge to grow along with the company.

EDUCATIONAL QUALIFICATION
COURSE INSTITUTION DURATION PERCENTAGE/CGPA
B.E. Velammal Engg. College 2008-2012 8.76(CGPA)
Higher Alpha Matriculation
sec. HigherSecondary School 2007-2008 94%
Matriculation Achariya
examination Siksha Mandhir 2005-2006 84.8%

ADDITIONAL QUALIFICATION
SOFTWARES :AutoCAD,PROE,CATIA,Ansys,NX-CAM. AREAS OF INTEREST : Design and Design Software. LANGUAGES : Fundamentals of C and C++. OPERATING SYSTEM : Windows 98, Windows 7, Windows XP.


CERTIFICATE COURSES
1. Post Graduate Diploma in Mechanical CADD at CADD CENTRE, Mylapore.
2. Prathamic-Hindi.
3. Madhyama-Hindi.
PROJECTS
1. FINAL YEAR PROJECT
Generation of Electricity through Linear Motion.
It is used to generate electricity from the deflection produced in the speed breaker when the vehicle passes over it.
ROLE : PRO-E Designer.
2. MINI PROJECT
Design and Fabrication of Fixture for holding Boiler’s Dished End.
It enables us to perform various operations like Surface m/c, Edge m/c and Drilling on boiler’s dished end by using the same Fixture and without changing job’s position.
ROLE : Making Prototype.
INDUSTRIAL EXPERIENCE
1. IMPLANT TRANING : Integral Coach Factory (ICF) – 10 Days.
2. INDUSTRIAL VISITS : Ashok Leyland, Breaks India, TI India Ltd.
ACHEIVEMENTS
1. Made F1 Race Car Design for SUPRA 2012, conducting by SAE India and we have selected for the final race. We started to fabricate the Car.
2. Presented TECHINICAL PAPER on “Generation Of Electricity through Linear Motion “at IIT Madras & IIT Kharagpur.
3. Selected for TIER-2 in the Events CAD Modeling and Analysis conducted by SAE India.
4. Won 1st place in INDUSTRIAL DEFINED PROBLEMS held at Kongu College.
5. Won 2nd place in CAD MODELLING held at Kongu College and CIT College.
6. Won 3rd place in CAD MODELLING held at SSN Engineering College.
EXTRA-CURRICULAR ACTIVITIES
1. Participated in sports like cricket and table tennis.
2. Participated in drawing competitions and won prizes.
INTEREST
- Softwares like Auto CAD, PRO-E, CATIA, Ansys.
- Learning new software.
KEY STRENGTHS
- Self motivation.
- Team worker.
- Adaptive.

Date :07-07-2012.
Place :Chennai.

[Guest]

K.KARTHIKEYAN,
EMAIL ID : karthikeyan.krishnamurthy AT yahoo.com
OBJECTIVE
To get into a profession that is challenging and interesting and offers great deal of exposure to latest trends and to work in a progressive organization where I can enhance my skills to contribute to the success of the organization
EDUCATION QUALIFICATION
- M.Tech : Master of Technology in VLSI and Embedded System Technologies from DR.MGR University with CGPA of 8.64, year of passing may, 2012.
- B.Tech : Bachelor of Technology in Electronics and Communication Engineering(ECE) from Sri Manakula Vinayagar Engineering College, Puducherry, (Pondicherry University) with CGPA of 6.92, year of passing- 2010.
- HIGHER SECONDARY(XII) : Higher Secondary from Amalorpavam Hr. Sec. School, Pondicherry, Matriculation Board of Education, with 70%, year of passing-2006.
- SSLC(X) : From Amalorpavam Hr. Sec. School, Pondicherry, Matriculation Board of Education, with 88.4%, year of passing-2004.
TECHNICAL SKILLS :
- Languages : C, C++,VHDL,verilog.
- Operating System : Windows XP, Windows 07.
- Packages : MS Office.
AREAS OF INTEREST :
- Digital electronics, Microcontroller – 8051, Embedded System, ASIC.
PERSONAL SKILLS
- Self confident , hard worker , Willingness to learn, Active team player
CO- CURRICULAR ACTIVITIES
- Built a FM receiver for practical knowledge
- Visited WIPRO for assembling PC
- Participated in the “Vision 2009” workshop on “Chandrayaan-1”, conducted by ISRO at College of Engineering Guindy
- Industrial Visit ISRO Bangalore .
- Participated in Texas Instruments Embedded Design Contest 2012.
- Hands-on Training - Low Power Embedded System Using Texas Instruments MSP430 (Ultra Low Power) microcontroller at Dr. Ambedkar college, Bangalore.
- Hands-on Training - Implementation of Signal Processor application on FPGA using Xilinx System Generator held at Karunya University, Coimbatore.
- Workshop - PLC Programming at Dr MGR University, Chennai.
- Seminar - Design Strategies for ARM Systems Avnet Electronics Marketing Asia and ARM on Aug 12, 2011 at Bangalore.
EXTRA CURRICULAR ACTIVITIES
- Playing cricket ,Hearing music
EDA TOOLS
- Xilinx Tool, Keil microvision , modelsim,code composer studio
STRENGTH
- My Speech and capacity to adapt myself to various situation
PROJECT :
- M.TECH PROJECT
- FPGA IMPLEMENTATION OF REAL-TIME ETHERNET COMMUNICATION
Using RMII Interface
My project is implementing FPGA on Ethernet using reduced media independent interface. This paper presents a new solution for 100Mb/s FPGA-based Ethernet communications with timing analysis. The solution deals with "Reduced Media-Independent Interface" in its physical layer
- B.TECH PROJECT
I have completed my project on face recognition using image processing filter
Declaration
I hereby declare that the above information about me are true to the best of my knowledge
Place :Pondicherry Yours faithfully
(K.Karthikeyan)