CATIAV5 & Enovia or VPM Engineer Bangalore : www.roljobs.com Roland Associates

[Admin]

Roland & Associates Bangalore : Lighting & Data Management Engineer(CATIAV5 & Enovia or VPM or Team Center
Company Name : Roland & Associates
Company Location : Bangalore
Designation (of vacancy) : Lighting & Data Management Engineer(CATIAV5 & Enovia or VPM or Team Center)@ Bangalore for MNC automobile manufacturer
Company E-mail ID : vineetha@roljobs.com
Company Website : www.roljobs.com

Job Description, Candidate Profile, Company Profile, Company Address :
Education & Training :
B.E. in Mechanical & Catia V5 & either of Enovia/VPM/Team Centre

Relevant Experience Required :
1. Must have 2 to 3 years of experience in Design of Lighting systems
2. Must have 2 years of relevant experience in Data Management, PLM, Release control and coordination & understanding of drawing standards

Skill Requirements :
1. Experience in CAD with CATIA V5 is required
2. Should have experience in optical system design for exterior automotive lighting components (headlamp, tail lamps, etc.)
3. Should understand operating principles of reflectors and lenses
4. Should be able to interpret light distributions
5. Should have experience dealing with LEDs and incandescent bulbs
6. Know-how about either of Enovia/VPM/Team Centre (CATIA V5/V4) is a must
7. Knowledge of Product Structure Navigator (PSN) for VPM
8. Creation of BOM/Assemblies
9. Proficiency in German language would be an added advantage

Job Responsibilities :
1. 50% - Lighting System & 50% - Data Management
2. Ensure manufacturability of proposed design
3. Data and release management
4. Drawing approval
5. Must formalize the process of release & change management
6. Must be able to mentor the team in the topic of Release & data management

Contact us :
Office 1 :
Roland & Associates
Ground Floor, Vanguard Rise,
5th Main, Konena Agrahara,
Off HAL Airport Road,
Bangalore - 560 017
Phone : +91 80 4282 1600

Office 2 :
Roland & Associates
Unit 001, Basement Floor
Oxford House
Rustambagh Main Road
Off Airport Road
Bangalore - 560017
Ph : +91-80- 41258667

[Guest-IJT]

KALMESH.B.AMAGOND Mobile: 9481137340, 9960437959
e-mail: kalmesh.amagond@gmail.com


OBJECTIVE:
I am looking for an organization that lends me a supportive and ample chance to contribute and diversify my knowledge and skills. I hope your organization challenges me intellectually and offers me a good potential for future growth.

Domain Skills: 2D to 3D conversion, Drafting, Assembly, solid & Surface design.

CAD Skills: Catia V5, Auto Cad 2000.

Secondary Skills: Team centre and Basic knowledge of GD & T.

Educational Qualification:
- B.E in MECHANICAL Engineering from BLDEA’S College of Engg & Tech, Bijapur, Board: VTU, Belgaum. (69%, 2005)

WORK EXPERIENCE:
A total 3+ years of experience as a design engineer in Automotive and
Aerospace domain.

- Working as a Project Engineer at Taco Visteon Engineering Pvt Ltd-Pune, since Dec 2007 for automotive interiors.
- Worked as a Design Engineer at HCL Technologies Ltd, Bangalore from April 2007 to Dec 2007 for aerospace.
- Worked as a Design Engineer at Geometric Software Solutions Co Ltd, Bangalore from Aug 2005 to March 2007.

PROJECT PROFILE:
01 Project Name Product design & Development of Front Bumper
Company Taco Visteon Engineering Pvt Ltd-Pune.
Client Mahindra & Mahindra
Description of the project - Input from the customer was styled ‘A’ surface.
- Section Proposals for mounting in Front Bumper assembly. Sections were also including the interface between different parts
- ‘B’ side surface creation from the ‘A’ surface & to provide the attachment features with reference to tooling direction.
- Proposal for Reinforcement structure.
- Fixture creation for Bumper Facia.
- Maintain gap & flushness condition.
- Draft analysis.
- Drafting & detailing of Bumper assembly & its parts.
Responsibilities Product design & Development
Software CATIA-V5

02 Project Name Re-mastering of Door
Company Taco Visteon Engineering Pvt Ltd-Pune.
Client Chrysler
Description of the project - Input from the customer was wire frame data
- Creating the output, independent of input model.
- That is convert unparamaric model into parametric model.
Responsibilities 3D modeling from the given input.
Software CATIA-V5

03 Project Name Drawing creation for IP
Company Taco Visteon Engineering Pvt Ltd-Pune.
Client Mahindra & Mahindra
Description of the project - Creation of drawings according to customer’s standards & specifications direction.
Responsibilities Drawing creation
Software CATIA-V5

04 Project Name 2D to 3D conversion of Sheet metal parts. (Bracket, Diaphragm, Angle, Plate, Intercostals, Skin panel, Doublers, etc…)
Company HCL Technologies Ltd, Bangalore.
Client Alenia Aeronautica, Iteli.
Description of the project - Modeling and detailing of structural components of the aircraft such as bulkheads, ribs, skin, spar, doublers.
- Input data are in tiff format or V4 data. Find the location of the given input using assembly drawings.
- Create 3D models are in generative sheet metal or Aerospace sheet metal workbench in given location and create drawing according to customer specification & standard.
- Save the catpart & catdrawing in the team centre.
- Prepare the weight sheet and save it in Team centre.
- Fill the Engineering sheet in team centre as per given input.
Responsibilities 2D to 3D conversion.
Software CATIA-V5

05 Project Name 2D to 3D conversion. (Bracket lock front, rail track upper, rail track lower, etc…)
Company Geometric Software Solutions co Ltd , Bangalore
Client Volvo Information Technology, Bangalore
Description of the project - Given inputs are in tiff form & create models matching to tiff and created drafting using new template & standards.
Responsibilities 3D modeling from the given input.
Software CATIA-V5

06 Project Name Drawing creation.(Recliner upper mounting plate, recliner upper hart)
Company Geometric Software Solutions co Ltd , Bangalore
Client Volvo Information Technology, Bangalore
Description of the project - Creation of drawings according to customer’s standards & specifications.
- Quality check done according to check list.
Responsibilities Drawing creation
Software CATIA-V5
Awards & achievements
- Best Team award in TACO Visteon.

Trainings Undergone
- Plastic training in TACO Visteon by NTTF Bangalore.
- GD & T training given in TACO Visteon by Symphony Technologies.

PERSONAL DETAILS:
NAME : Kalmesh .B. Amagond
FATHER NAME : Balasaheb. R. Amagond
PERMANENT ADDRESS : S/O B. R. Amagond, Teachers colony near Ashram
Road Bijapur-586101, State-Karnataka.
TEL-PHONE : 08352-264627
DATE OF BIRTH & PLACE : 5-2-1983, Bijapur
NATIONALITY : Indian
MARITAL STATUS : Bachelor

PLACE: YOUR’S FAITHFULLY
DATE: (Kalmesh B Amagond)

[Guest]

HELLO SIR,
Name : MALLIKARJUNA B. N.
Education Details
Degre
University
Year
B. E. (Mechanical)
Visveswaraiah technological University, Belgaum
2006
Professional Experience
Total Experience :
4 + Years
- Worked as a Graduate Apprentice Trainee in EL & AV Dept, ARDC,
HAL during Oct' 2006 to Aug ' 2007 .
- Worked as a Contract Engineer in BAe-HAL Software Ltd & deputed to EL & AV Dept, ARDC, HAL during Aug' 2007 to Aug' 2008 .
- Working as a Software Engineer in BAe-HAL Software Ltd & deputed to EL & AV Dept, ARDC, HAL from Aug' 2008 to till now.
CAD and related Packages :
CATIA V5 , ENOVIA VPM 1.6, AUTO CAD 2000
Other skills :
- Content Creation of 3D modelling of EL & AV related LRU's / Antenns/ Panels/Lights.. etc for Tejas a/c and upload them onto GA (GENERAL ASSEMBLY) of the aircraft model through ENOVIA VPM .
- Making the Layouts/Installation dwgs for all EL & AV related LRU's / Antenns for Tejas a/c and upload this onto ENOVIA VPM
- Releasing the drawings of Tejas a/c by Co-ordinating with Respective Design Groups, viz : Stress, Fatigue, Materials, Dynamics & Wt. Control and finally dwg will be released by Checking Group, i.e. DQ .
- Solving the SQ/PQ/SL/DDR/RFA'S raised by Shop/Inspection/ Methods & Planning/CSDO for Tejas a/c & finally absorb the deviations and implement by give the Suitable rework scheme by making Project Slip (PS)/Higher Issue/Batch Replacement/Sketchs.
- Checking & Correcting the ' Aircraft Illustrated Parts Catalogue (AIPC) ' prepared by ' Technical Publication Team (TPM Dept) for the LCA - Tejas a/c .
Projects Details
PROJECT TITLE : Installation of Line Replaceable Units of Avionics System .
Position :
Organisation :
Team Member
BAe-HAL Software Ltd.
Hardware / OS :
UNIX / Windows 2000.
Software :
CATIA V5 R19 , ENOVIA VPM , AutoCAD
Client :
LCA Documentation, ARDC, HAL
Project Summary and Responsibilities :
- Position of the LRU’s on a/c as per Inboard Drawings.
Follow the LRU’s Procedure to Instal the LRU’s on the a/c .
Checking the Clash/Fouling of other Design Groups Equipments.
Making the 3D models and Creation of 2D Drawings for compliance on a/c
Release the Drawings by taking co-ordination by all Design Groups .
Absorb the acceptable Deviations on a/c & amend the Dwg accordingly by Issuing HI / PS / BR .
PROJECT TITLE : Installation of Unified Electronic Warfare System (UEWS) .
Position :
Organisation :
Team Member
BAe-HAL Software Ltd.
Hardware / OS :
UNIX / Windows 2000.
Software :
CATIA V5 R19 , ENOVIA VPM , AutoCAD
Client :
LCA Documentation, ARDC, HAL,
Project Summary and Responsibilities :
Position of the LRU’s and Antennas on a/c as per Inboard Drawings.
Involved in modeling of LRU & its mountings & design of support brackets for fixing LRU to the Structure.
Co-ordination with Structure and Aerodynamics Group for clearance
Checking the Clash/Fouling of other Design Groups Equipments.
Making the 3D models and Creation of 2D Drawings for compliance on a/c
Release the Drawings by taking co-ordination by all Design Groups .
Absorb the acceptable deviations on a/c & amend the Dwg accordingly by issuing HI/PS/BR.
PROJECT TITLE : Installation of Video Digital Recorder (VDR)
Position :
Organisation :
Team Member
BAe-HAL Software Ltd.
Hardware / OS :
UNIX / Windows 2000.
Software :
CATIA V5 R19 , ENOVIA VPM , AutoCAD
Client :
LCA Documentation, ARDC, HAL,
Project Summary and Responsibilities:
Position of the LRU’s on a/c as per Inboard Drawings.
Involved in modeling of LRU & its mountings & design of support brackets for fixing LRU to the Structure.
Checking the Clash/Fouling of other Design Groups Equipments.
Making the 3D models and Creation of 2D Drawings for compliance on a/c
Release the Drawings by taking co-ordination by all Design Groups .
Absorb the acceptable Deviations on a/c and amend the Dwg accordingly by Issuing HI /PS / BR.
PROJECT TITLE: Installation of INS / GPS Antenna .
Position:
Organisation:
Team Member
BAe-HAL Software Ltd.
Hardware / OS:
UNIX / Windows 2000.
Software:
CATIA V5 R19 , ENOVIA VPM , AutoCAD
Client:
LCA Documentation, ARDC, HAL
Project Summary and Responsibilities :
Position of the Antenna on a/c as per Inboard Drawings.
Co-ordination with Structure and Aerodynamics Group for clearance
Making the 3D models and Creation of 2D Drawings for compliance on a/c
Release the Drawings by taking co-ordination by all Design Groups .
Extra curricular activities :
Checking and Clearing the Aircraft Illustrated Parts Catalogue (AIPC)
prepared by TPM Group for LCA-LSP a/c.
Handling the database of All Instln Dwg. No. / Locations for all
LRU’s/Antennas/Lights/Relays/Delta Connectors for Tejas LCA a/c.
Shop Follow Up activities and Solving the all Quiries for LCA-LSP a/c.