TVS Srichakra Ltd Chennai : Technical & Quality Assurance Engineer

[krishni84]

Functional Area : Technical & Quality Assurance

Position Title JE/ Executive- Technical
Area / Section Technical - Testing
No. of Positions 1
Education DME / Graduate Degree
Experience (Yrs) Rubber industry testing Tire & Tube testing knowledge desirable
Age (Yrs) 30
Competencies required Mechanicla Engg, to read a Drawing
Broad R & R Testing area Maintenance, Product Testing / Record
Possible CTC/M Fresh - as per policy. Experience one or two years - 10 K
Executive Manpower Requirements for Uttarakhand Unit of TVS Srichakra Limited , Send your resume to jobs@tvstyres.net

About us:
TVS Srichakra is one of the leading two and three wheeler tyre manufacturer in India rolling out over 11 million tyres per annum. Part of US $ 2.2 billion largest Auto Ancillary group TVS, founded by Sri. T.V.Sundaram Iyengar, TVS Tyres lives upto the rich heritage and strong value system of the parent company. Incorporated in 1982, the company manufactures a complete range of Two and Three wheeler Tyres and Tubes for the domestic market and Industrial Pneumatic tyres, Farm & Implements Tyres, Skid steer tyres, Multipurpose tyres, Floatation tyres etc. for the export market, at its state-of-art manufacturing facility at Madurai in Tamil Nadu. Spread over an area of 2.5 lakhs sq. mts, the manufacturing unit at Madurai employs over 2000 people.

Contact Us
TVS Srichakra Ltd.
Sudarsan Bldg. 5th Fl.,
14 Whites Rd.,
Chennai, 600 014, India
Tel 91 044 2852 6007,
fax, 91 044 2852 2992
http://www.tvstyres.com

[Guest-IJT]

Rameez khan
Mob :
E-mail :r08khan AT gmail.com
Objective :
To work in a professional environment with a growing and to accept new challenges , to reach my goals through my honesty & sincere efforts.

Profile :
Presently working with H.E.G LTD mandideep bhoapl from dated 20 th dec to till date. Has joined as a Trainee Engineer & after completion of training now looking ried hammer furnance & baking furnance plant as a engineer.

Work Experience :
- Select graph as per product and temp parameters in SCADA as per graph of furnace. - .Operate damper for required draft at both fire -1 and fire-2 and pressure at burner.
- Maintain the temp as per graph through overall process. .
- Plan chamber in which loading is to be done, check the loaded chamber and proceed
- control furnance temperature through scada and maintain draft inside the furnance.
- monitor electrostatic tar precipitator, gas conditioning tower, scorpio suction m/c, Hartman system.
- Well aware with planning & Implementation technique required for furnace smooth operation & commissioning.
- Maintaining daily reports & communication with furnace representative time to time for smooth execution of planning required for furnaces..
- Material management, Estimation of material & billing of concerned parties.
- Man power management.
- Organizing daily work at shop floor ensured proper housekeeping and coordinating with workers.

Company Profile :
H.E.G Ltd is only one of the leading Group in graphite electrode sector in India.
Its plant annual capacity of 66000 MT p/a . it is located in mandideep Bhopal mp.

Professional Skill-set :
* Aware with SAP operating system in Production planning & Plant maintenance Module{PP & PM Module }
* Strong Auto Cad skills .


Training :
- 45 Days Training under N.T.P.C VINDHYACHAL SINGRAULI
15 Days Training under MY CAR BHOPAL PVT LTD.

Project :
- Major project on hover craft .
- Minor project on solar pond.

Qualification :

- B.E {Mechanical} {2005-2009}from patel college of Science & Technology bhopal
- Aggregate percentage in B.E -68.66%.
Seminars Delivered :
- S-N Curves .
- Press Working.

[Guest-IJT]

Dear sir ,
Please find below CV.

YOGESH KUMAR SINGHAL
H.No. : A-23, Bhagya Lakshmi Society, Ramnagar, Rander Road, Surat – 395009, Gujarat, India.
Contact Detail : Mobile : 09909901830
Email Address : Yogi96_singh AT yahoo.co.in ; yogi96.singh AT gmail.com


OBJECTIVE
To secure a career as an Instrumentation engineer in reputed organization which will offer me excellent opportunity and challenge, where I can utilize my knowledge, various skills & experience in contribution towards fulfilling the company’s growth objectives, develop my career and excel in the related field.

SUMMARY
- Worked as an Instrumentation Engineer in the HSM (HOT STRIP MILL).
- Daily Routine Maintenance jobs in Instrumentation Department.
- Work experience of Preventive/Breakdown Maintenance and Troubleshooting of Conventional Process Control Instruments.
- Calibration and Maintenance of Field Instruments.
- Familiar with DCS & PLC jobs.
- Working as an Electrical& instrumentation engineer in the CSP (COMPACT STRIP PROCESS) Mill project.
- Erection and commissioning of electrical panels and equipments.

JOB DESCRIPTION/KEY RESPONSIBILITIES
Maintenance job profile : -

- Calibration and Maintenance of Field Instruments like Control Valves, knife Gate Valves, Switches (temp, level, pressure, vibration), all type of Transmitter (temp, pressure, flow), Magnetic flow meters by Krohne , HMD(Hot Metal Detector), Loop checking, Converters, SOV, Proximity sensors, On-Off Valve, I/P.
- Troubleshooting of Conventional Process Control Instruments.
- Shut down & Breakdown jobs preparation & planning.
- Modification/Up gradation activities as per requirement.
- Hands on work on S5-135U, S7-300 and GE FANUC PLC, little bit work on TDC3000 DCS in HOT STRIP MILL.
- Install a new temperature scanner make EUROTHERM for Controlling, monitoring and safety of HT motors.
- Install a DPT (Differential Pressure Transmitter) as Level Transmitter for all lube and morgoil systems.

Project job profile :-
- Power and control cable and termination schedule preparing and checking.
- Work on 4EOT cranes erection & commissioning with PLC (s7-300) & drive (yaskawa G7).Erection of all panels, control and power wiring, control testing and drive Parameterization in cranes.
- Attend an inspection call for auxiliary and utility DBs from power cube control ltd.at SATARA (PUNE).Checking of GA & BOM as per drawing, busbar meggering &HV Testing and control testing of all DBs.
- Erection of MCC, PDB and PMCC panels. Checking of GA & BOM as per drawing, Busbar meggering, Polarity checking of CTs &ammeters, primary injection for CTs, L&T ACB with SR71 relay testing,SEL751A relay programming & protection testing ,motorvision relay protection testing, incomer logic & outgoing feeder control scheme checking and Control testing.
- Testing of three power transformer of 2.5MVA (6.6/.433 KV) and two power transformer of 1MVA (6.6/.433 KV) dry type --- Ratio test, magnetic balance, vector test.



CAREER HISTORY
Current Employer : ESSAR STEEL LIMITED
Position Held : Engineer
Period of Service : July 2006 to Till Now
PERSONAL PROFILE
Permanent Address : In front of vichpuri school ,manohar colony, new bus stand
Weir,Bharatpur (Rajasthan)-321408
Date of Birth : 17TH November 1986
Gender : Male
Religion : Hindu
Marital Status : Unmarried
Nationality : Indian

ACADEMIC QUALIFICATIONS/DETAILS
Diploma : Passed with First Class (62.22%) in Instrumentation Engineering from Government Polytechnic Kota (Board of Technical Education Jodhpur Rajasthan).
Sr. Secondary Education : Passed with First Class (66.00%) from Rajasthan Board.
Secondary Education : Passed with First Class (71.17%) from Rajasthan Board.

PROFESSIONAL QUALIFICATIONS
Computer Knowledge : Basics in MS OFFICE, C programming.
In plant Training One month in plant training in “DSCL” (SHRI RAM FERTILISER & CHEMICAL LIMITED).
Industrial Training : Participated in Industrial Hydraulics training organized by BOSCH REXROTH AHEMDABAD.

HOBBIES AND INTEREST
Reading Books, Playing Cricket.

LANGUAGE KNOWN
Hindi, English and Gujarati. Yours Faithfully
(Yogesh Kumar Singhal)

Place : Surat

[Guest]

SUNITH KUMAR K S
BACHELOR OF TECHNOLOGY (POLYMER ENGINEERING)
Email :
sunithkumar123 AT gmail.com

Languages Known :
- English, Malayalam, Hindi ( Read, Write and Speak)
CARRIER OBJECTIVE :
- Intend to build a career with leading corporate of hi-tech environment with committed and dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging and creative environment.
EXPERIENCE SYNOPSIS WITH APOLLO TYRES LTD(ATL).
- As Engineering Trainee from September-2010 to April-2012
- Technical Department- Compounding
- Location : ATL, Perambra, Thrissur (D), Kerala.
- EXPERIENCE : 18 months

JOB PROFILE :
Engineering Trainee :(Technical-Compounding)
This involves
- Responsible for compounding process of entire tyre manufacturing unit of Apollo tyres.
- Ability to modify, improve and optimize the compound properties as per end use.
- Also Responsible to eliminate the technical problem related to Extrusion, dipping, calendaring process etc.
- Technology activities related to manufacturing like specification implementation, control of non-conforming product/ process, disposition of non-conforming product/ components, corrective and preventive actions, efficiency improvement, process modification, etc in the areas under Compounding section.
- System improvement studies based on analytical methods.
- Handling the shift activities.
- Conducting daily and weekly process audits
- Process analysis through control charts.
- Familiar with Lab related activities of rubber mixing and raw material testing.
- Introduce changes for quality improvements in the operations in coordination with process managers.
- Undertaking projects on reduction of defect level and scrap in compounds, treads and fabrics.
- Uphold quality plans and implement to high standards of excellence.
KEY SKILLS :
- Having thorough knowledge in compounding for various rubber products. Modification and improvement process, testing, manufacturing machinery for Polymer products.
- Well versified with Rubber Compounding ingredients used for production and sound knowledge about in machinery and sequence of operations involved and effects.
- Well versed with Extrusion, calendaring and fabric dipping process. And good exposure to solve the various process problems related to these sections.
- Having knowledge in IMS and other quality systems.
- To analyze and optimize the process parameters according to design specification and product requirement for enhancing product quality & performance.
- Familiar with statistical tools for process control.

PERSONAL STRENGTHS :
- Good Understanding Ability.
- Effective Supervision & Co-ordination.
- Ability to inspire team with dynamic leadership
- Commitment and dedication
- Have tremendous amount of drive, initiative
- Good team player
PERSONAL INTERESTS :
- Travel
- Reading News paper.
- Watching. TV
- Special interest in driving, Music.
- Playing Cricket, Foot ball and Badminton
ACADEMICS :
Course/Degree School/College/University Year of Passing Percentage
Bachelor of Technology (Polymer Engineering) Mahatma Gandhi University College of Engineering. Thodupuzha 2010 69.13 %
Engg :Diploma in Polymer Technology Government Polytechnic, Nattakom-Kottayam, Kerala 2006 69.60 %
10th Dept. of General Education Kerala State.GHSS Thirumarady, Ernakulam 2000 65.00%
POSITION HELD AFTER DIPLOMA :
- 14 Months worked as an ‘Assistant Quality Supervisor at Paragon Polymer Products Pvt Ltd, Hyderabad, A.P
TRAINING UNDERGONE
- 2 Weeks training at Rubber Research Institute of India, Kottayam.
PROJECT WORK AND PAPER PRESENTATION :
- Paper Presentation on “Edible food Packaging Materials”.
- Academic project on “Establish the Co-relation between side wall compound viscosity and Rim Centre Line Crack” at CEAT TYRES LTD NASHIK, MUMBAI.
PROJECT WORK AND PAPER PRESENTATION :
- Worked as the Member of IIChE student’s chapter MGUCE”.
- IIChE is the professional body of chemical engineers in India. I have actively Participated and organized events sponsored by IIChE.
- Third Prize for IIchE quiz competition-2010.
- First Prize for “BLUE PRINT MODELING” in National Seminar
(TWISHA ‘09) Which is Conducted by Polymer Engineering
MGUCE.
COMPUTER SKILLS :
- MS Office

EXPECTED SALARY :
- Open for negotiation
REFERENCE :
- Shall be furnished on request
DECLARATION :
I consider myself familiar with Rubber Technology aspects. I am also confident of my ability to work in a team.

I hereby declare that the information provided is true to the best of my knowledge.
SUNITH KUMAR K S