www.satyameducation.in Satyam college of Education Noida : Principal, Assistant Professor

[muthukalee]

Sr. No. 1

Post/Subjects : Principal

No. of Posts : 1 (Open)

Qualification :
1. Good academic record with 55% of the marks or an equivalent grade of ‘B’ in the 7 point scale with latter grades O,A,B,C,D,E at Master’s Degree level in Arts or commerce from and Indian university or an equivalent degree from a foreign university.
2. Ph. D or equivalent published work.
3. Total experience of 15 years of teaching / Research in the university / colleges and other institutes of higher education (for professor’s Grade)
OR
Total experience of 10 years of teaching / Research in the university / colleges and other institutes of higher education (for reader’s Grade)

Sr. No. 2.

Post/Subjects : Assistant Professors
a) Hindi Method
b) English Method
c) Science Method
d) Economics Method
e) Mathematics Method
f) Social science Method
g) Commerce Method

No. of Posts : 4 (open)
1 (SC)
2 (OBC)

Qualification :
Good academic record with 55% of the marks or an equivalent grade of ‘B’ in the 7 point scale with latter grades O,A,B,C,D,E and F at Master’s Degree level in relevant subject/s from an Indian university or an equivalent degree from a foreign university. Besides, fulfilling these qualifications. Candidates should have cleared the national eligibility test (NET) for the lectures conducted by the UGC, CSIR or similar test accredited by the completed M. Phil Degree by 31-12-1993 or have submitted Ph. D thesis to the University in the concerned subject on or before 31.12.2002 are exempted from the NET/SET examination. In case such candidates fail to obtain Ph. D. Degree, they shall have to pass the NET/SET examination.

About us :
Satyam college of Education, promoted by Satyam Charitable Trust (SCT), has been established with a firm commitment to foster a holistic approach to facilitate and promote studies and research in emerging areas of Education. Aim being to achieve excellence in the Educational field towards development of Education in the era of globalization. The institute is affiliated to the SNDT Women's University, Mumbai, accredited with five star status by NAAC for academic excellence.

Contact us :
SATYAM COLLEGE OF EDUCATION
C - 56 A / 14 & 15
Sector - 62 , Noida
Uttar Pradesh , India - 201309
Contact No. 0120-4082000
Mobile No 9958094700 /01 /02
Fax 0120- 4082082
E-mail info@satyameducation.in
Website www.satyameducation.in

[Guest]

Hello,
Sir/Ma'am,
My name is Sarswati Tiwari and I m a lecturer in Galgotia's College, teaching Professional Communication, Remedial English and Soft Skills. I know that I saw this advertisement a little late but I need a switch because for my job I have to cover a long way daily i.e. from Noida to Gr. Noida. If u think that I m elligible then plz contact me or u can send me a mail too, i ll be glad to recieve your response. My mobile no is and my email id is sarswatitiwariau@gmail.com.
Thankyou,
Regards,
Sarswati Tiwari
Lecturer (GCET)

[Guest-IJT]

Name : siva kumar
Email : sivakumar.ch76 AT gmail.com
Designation / Skillset : Sr.Principal Engineer - Piping & Layout
Piping & Layout engineer both on-shore and off-shore with 11+ years of experince.

Resume :
CAREER OBJECTIVE :-
Seeking challenging assignments in technology driven organization where my skill and energy can be put maximum use for mutual growth of organization and myself.
_________________________________________________________________________________________
SYNOPSIS :-
- Experience of 11+ years as a Piping Engineer.
- Passed B.E (Mechanical ) engineering from S.R.K.R engineering college affiliated to Andhra University with first class in the year 2002.
- Well conversant with B31.1, B31.3, ASME and API codes.
- Well conversant with the preparation & checking of Equipment layout, piping layout , piping study & Iso-metric drawings.
- Well conversant in Review & preparation of PMS, data sheets, RFQ’s, TQ’s, TBE’s, PR’s and RTV’s.
- Good knowledge in MS office & Auto-cad.
- Conversant with PDMS-12.0, Caesar-II V 5.10, Auto-cad & Navis works.
- Hands-on experience of Basic & Detail Engineering in piping designing.
- Undergone Technician apprentice in Visakhapatnam Port Trust from April 1997 to March 1998.
_________________________________________________________________________________________
PROFESSIONAL EXPERIENCE :-
1. Company name : J.Ray McDermott Engineering services pvt. Ltd. Chennai.
Designation : Senior Principal Engineer – Piping & Layout.
Term : February 2010 to till date.
Company Profile : J. Ray McDermott is a leading worldwide marine solutions company with fabrication facilities in the Americas, Middle East, Caspian and Asia Pacific. Services include design, fabrication, transportation and installation of offshore platforms, and installation of offshore pipelines.
JRM operates a diversified fleet of vessels for the marine construction industry. Most of our primary vessels are combination derrick and lay barges, making the fleet one of the most versatile in the world. Our global fleet is located in the Gulf of Mexico, Asia Pacific, the Middle East, and the Caspian.
Pre-Order activity :
1. Deen Dayal field Development – PLQP Platform
Client : Gujarat State Petroleum Corporation Ltd., India.
2. Arabiyah & Hasbah Field development
Client : Saudi Arabian Oil Company.
Responsibilities during the execution of project –

- Conceptual Study.
- Over All Layout .
- Scope Matrix.
- Risk matrix.
- Piping Design Basis Preparation.
- Technical Queries.
- Bid Package preparation.
- Inter department coordination.
Project 1 : Upgrade Crude gathering & power supply facilities phase-I –
Safaniya Field. ( Client : Saudi Aramco )- (Off-Shore)
Project 2 : Zakum Water Injection Upgrade Project Pressure & Capacity
Upgrade ( Client – ADMA OPCO) - (Off-Shore)
Responsibilities during the execution of project –
- Manpower planning & effective utilization of Man-hour for assigned job.
- Attending Project Review Meetings.
- Monitoring Schedule of Engineering deliverables and Progress.
- Review of Critical Design deliverables.
- Development of Department and Up gradation of Departmental Standards / Design Guides/Work Instruction / Check List etc.
- Review of documents as per quality plan.
- Providing input data, prepare sketches / drawings, document and help designers to understand in Modeling/drafting work.
- Perform multi-disciplinary coordination as required
- Checking & review of vendor documents & drawings.
- Preparation and Review of RFQ’s , TBE’s & PR’s for piping bulk MTO and Valves.
- Review of PMS/VMS.
- Perfor 3D model design review with inter disciplines & Client.
- Issuance of AFC document and drawings to client/project.
- Review, summarizing & Issuing the Piping MTO.
- Reviewing & approving of equipment layouts, along with material handling study.
- Review of piping layout drawings.
- Consistency checking of the drawings verses equipment layout, piping layout, piping isometric, piping supports, bulk and final material take-off.
- Provide guidance, technical backup & direction to design team 3D Designers/ Draughtsman & coordinate for piping design activities
- Reviewing of Nozzle orientation drawings.
- Technical discussion with other disciplines, vendor & Client.
- Developing internal quality system & activities.
2. Company name : PL Engineering Limited ( Formerly Simon Carves
India ltd.,) ( PUNJ LLOYD COMPANY )
Designation : Dy.Manager – Piping.
Term : November2008 to January 2010.
Project 1 : PTTPE LDPE PLANT PROJECT
Project 2 : SAUDI KAYAN PETROCHEMICAL COMPLEX
( 300 KT/A LDPE PLANT )
Responsibilities during the execution of project –
- Manpower planning & effective utilization of Man-hour for assigned job.
- Attending Project Review Meetings.
- Monitoring Schedule of Engineering deliverables and Progress.
- Development of Department and Up gradation of Departmental Standards / Design Guides/Work Instruction / Check List etc.
- Work planning and adherence to scheduled completion of engineering deliverables.
- Perform multi-disciplinary coordination as required
- Check drawings as per check list and maintain check print.
- Checking & review of vendor documents & drawings.
- 3D model review internal/external(with client)
- Ensure quality for the deliverables
- Review and preparation of MTO
- Reviewing & approving of equipment layouts.
- Review of piping layout drawings.
- Checking of Iso-metric’s, GAD’s, etc.,.
- Reviewing of Nozzle orientation drawings.
- Technical discussion with other disciplines, vendor & Client.
Pre-order activities & development projects :
1. Paradip tank Project – ( Client : IOCL, India. )
2. B-193-KGC-( Client : ONGC , India)- ( Off-Shore)
3. Intermediate Storage tank transfer facilities project( Client : IOCL , India )
4. EPCC of WEFA inlet gas compression facility ( Client : Mellitah Gas B.V. LIBYON )
5. Sterlite ( Clinet : Sterlite Industries India Ltd., )
Responsibilities during the execution of development projects :
- Conceptual Study.
- Over All Layout .
- Scope Matrix.
- Risk matrix.
- Piping Design Basis Preparation.
- Technical Queries.
- Inter department coordination.
3. Company name : L & T Valdel Engineering Ltd,
Designation : Senior Piping Engineer ( Lead)
Term : March 2007 to October 2008.
1. Project : FPSO Cidade de Santos MV 20 – Gas (Petrobras)
( Client – MODEC International LLC. )
Term : March 2008 to October 2008.
2. Project : FPSO Cidade de Niteroi MV 18 (Petrobras)
( Client – MODEC International LLC. )
Term : March 2007 to February 2008.
Responsibilities during the execution of project –
- Manpower planning & effective utilization of Man-hour for assigned job.
- Attending Project Review Meetings.
- Monitoring Schedule of Engineering deliverables and Progress.
- Development of Department and Up gradation of Departmental Standards / Design Guides/Work Instruction / Check List etc.
- Work planning and adherence to scheduled completion of engineering deliverables.
- Checking drawings as per check list.
- Checking & review of vendor documents & drawings.
- Review of PMS/VMS.
- 3D model review internal/external(with client)
- Ensure quality for the deliverables
- Review and preparation of MTO
- Reviewing & approving of equipment layouts.
- Review of piping layout drawings.
- Checking of Iso-metric’s, GAD’s, etc.,.
- Reviewing of Nozzle orientation drawings.
- TQ’s specification.
- Technical discussion with other disciplines, vendor & Client.
- Developing internal quality system & activities.
4. Company name : M/s. S.G.S. India (P) Ltd.,
Designation : Piping Engineer
Term : July 2005 to February 2007
Project : M/s. Hindustan Petroleum Corporation Ltd.,
Visakhapatnam ( Refinery – DHDS, SRU-1 & 2, CDU)
Responsibilities during the execution of project –
- Collect input data, prepare sketches / drawings, document and help designers to understand and show progress in Modeling/drafting work.
- Perform multi-disciplinary coordination as required
- Check drawings as per check list and maintain check print.
- Checking & review of vendor documents & drawings.
- Review and preparation of MTO
- Preparation & checking of Iso-metric’s.
- Checking of GAD’s .
- Reviewing of Nozzle orientation drawings.
5. Company name : M/s. B O C India (P) Ltd.,
Designation : Piping Engineer
Term : October 2004 to June 2005
Project : 65 TPD Air Separation unit near Pashamylaram in
Hyderabad.
Responsibilities during the execution of project –
- Checking & review of vendor documents & drawings.
- Review and preparation of MTO
- Preparation & checking of Iso-metric’s.
- Checking of GAD’s .
- Reviewing of Nozzle orientation drawings.
6. Company name : M/s. LARSEN & TOUBRO
Designation : Piping Engineer
Term : August 2002 to September 2004
Project : ATVP ( Advanced Technology Vessel Project )
Ship Building unit, Naval Dock yard , Visakhapatnam.
Responsibilities during the execution of project –
- Checking & review of vendor documents & drawings.
- Review and preparation of MTO
- Preparation & checking of Iso-metric’s.
- Checking of GAD’s .
- Reviewing of Nozzle orientation drawings.
7. Company name : M/s. Randhawa Construction Co.,
Designation : Piping Engineer
Term : May 1998 to November 1999 &
February 1996 to March 1997.
Project : 1. OSBL & ISBL piping & Distillation units for Reliance
Petroleum limited, Jamnagar, Gujarat.
2. Coromandel Ammonia pipe line ( CAPL ) project under
TOYO engineering India ltd., in Visakhapatnam
3. Pasarlapudi layout piping for ONGC India ltd., under L&T
in W.G Dist. (Andhra Pradesh).
Responsibilities during the execution of project –
- Checking & review of vendor documents & drawings.
- Review and preparation of MTO
- Preparation & checking of Iso-metric’s.
- Checking of GAD’s .
- Reviewing of Nozzle orientation drawings.
CH.SIVA KUMAR
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4257541
Date & Time : 15th Jun 2011 4:29 PM (UTC)
IP Address : 14.99.6.58
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MALN; InfoPath.2; .NET4.0C)
Predicted Country : --