Production Manager Mumbai : Vinati Organics Ltd

+ Ask Question / Post resume
Results 1 to 3 of 3
  1. Post Count Number #1
    Veteren
    Join Date
    September 23rd, 2010
    Location
    Tuticorin
    Posts
    928

    Production Manager Mumbai : Vinati Organics Ltd

    Position Production Manager
    Qualification Degree in Chemical Engineering. If MBA, shall be preferred
    Experience 12-15 years in Chemical / Petro Chemical Industry
    Additional Knowledge Thorough knowledge of running the plant
    Age Limit 35-45 years
    Location Mumbai

    About Us

    Vinati Organics Ltd. (VOL) is a specialty chemical company producing organic intermediates, monomers and polymers. It is listed on the Bombay Stock Exchange and has over 300 employees. VOL is the world’s largest manufacturer of Isobutylbenzene (IBB), the basic raw material in manufacture of Ibuprofen, with a capacity of 14,000 TPA. It is also the world’s second largest manufacturer of 2-Acrylamido-2-Methyl Propane Sulfonic Acid (ATBS), with a capacity of 12,000 TPA. M/s. Vinati Organics Ltd. (VOL) is a public limited company, listed with Bombay Stock Exchange. VOL started commercial production at its second unit installed in Lote Parshuram and became the third company in the world to manufacture specialty monomers, 2-Acrylamido 2-methylpropanesulfonic Acid. ATBS is a co-monomer having applications is acrylic fiber, water treatment, emulsions, paints and oil field drilling industries.
    VOL's substantial growth is mainly attributed to its efficient manufacturing and sales practices.

    Contact us
    Vinati Organics Limited
    Shiv Ashish Complex, 2nd Floor, Andheri Kurla Road , Saki Naka Mumbai - 400 072, Maharashtra,India
    Phone: +(91)-(22)-4201 4444
    Fax: +(91)-(22)-28510729 / 42014438
    Email: resume@vinatiorganics.com
    Website : www.vinatiorganics.com
    Last edited by krishni84; October 24th, 2010 at 08:16 PM.

  2. Post Count Number #2
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    RESUME

    SANNY BANSOD

    E-mail : sanny_bansod AT yahoo.com
    Application for the post of ___________________________________________________

    TECHNICAL QUALIFICATION : Diploma in Metallurgy Engineering from Polytechnic, Durg (institute of Govt. Chhattisgarh) Affiliated to Rajiv Gandhi Technical Education, Bhopal (M.P)
    Qualification Institute Board/University Year %age
    Diploma in Metallurgy Engg Poly Technic , Durg (C.G) Rajiv Gandhi Technical Univ. Bhopal(M.P) 2007 60.00
    M.B.A (Production & operation Management) BHILAI SIKKIM MANIPAL UNIVERSITY , MANIPAL 2010 APPERING
    EXPERIENCE :
    Sl. No Name of the company Position Joining Relieving
    1 IND SYNERGY Ltd, RAIGARH ISO 9001-2008 ASSITANT ENGINEER 20–07 -2009 Till the date

    - WORK EXPERIENCE

    Present Working For IND SYNERGY Ltd, RAIGARH ISO 9001-2008 as an ASSITANT ENGINEER (project & Operation). in 1 No’s 260 Cubic metar Capacity of “MINI BLAST FURNACE” & 1 No. 36 Square metar “ SINTER PLANT” From JUN 20 , 2009 to till date.

    Working For Poly bond insulation Pvt. Ltd, ISO 9001-2008 as an Junior Engg in 1 No’s 15 Cubic metar Capacity of “MINI BLAST FURNACES” From 2 September, 2008 to June 10, 2009
    Working For SMC POWER GANRETION LMT, JHARSUGARH (ORRISA) as a Junior Engineer in 2X350 Capacity of “SPONGE IRON” From Aug 29, 2007 to 1 September. 2008.

    BLAST FURNACE OPERATION
    - Maintaining casting schedule
    - Removal of safe hot metal from tap hole
    - Preparing of tap hole & runner etc.
    - Activation of tuyers, operation of MudGun and drilling machine
    - Monitoring and maintaining of blast furnace parameters viz hot blast volume, hot blast temperature, RAFT, Tuyer velocity and steam injection.
    - Raw material charging with PLC and manual mode.
    - Coke rate reduction technique with increasing HBT, proper charging sequence, burden distribution, gas utilization, high top pressure, elimination of hanging, slipping, offrod furnace, vary coke bed thickness, blast humidification, calibration of load cell periodically, elimination of wind volume reduction.
    - Controlling of blast furnace irregularities such as hanging, hearth chilled, channeling, tuyere burning, hearth breakout etc.
    - Hot blast stoves operation with PLC and manual mode
    - Raw material quality and its impact on furnace behavior.
    - Importance of BF gas cleaning, maintaining, minimum out dusts content.
    - Maintaining of GCP water quality..
    - Controlling and removing of alkali oxides with low alkali burden frequently giving cleanup charges.

    - .PROJECT :
    . SINTERING PLANT (S.P-1, S.P-2, S.P-3) “BHILAI STEEL PLANT (SAIL)”
    VOCATIONAL TRAINING :
    . Four Week training from “BHILAI STEEL PLANT (SAIL)” in
    Year2005 BHILAI.
    . Four Week training from” BHILAI STEEL PLANT (SAIL)”
    Year2006 BHILAI

  3. Post Count Number #3
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    RESUME

    MAGENDIRAN.R ENGINEER (MECHANICAL) PH: 09025422551, E-Mail:-magesindia AT gmail.com


    Objectives:

    To Work in a profesional organization, take up responsibility, try for collective growth and development, always keeping the organization’s goal as the priority and accept challenging assignment.


    Abstract:

    - Over 08 + year of Experience in Thermal Power Plant Erection/Fabrication
    Holding Diploma Mechanical Engineering.

    Technical Qualification:

    - Diploma in Mechanical Engineer (DME-2001),
    University : ANNA University, Chennai, Tamil Nadu.
    Percentage : 77 %

    - ASNT Level II in ULTRASONIC TESTING,

    - ASNT Level II in RADIOGRAPHIC TESTING, MPT & DPT,.

    Professional Experience:


    1) Company Name : M/s.CETHAR VESSELS LTD., Trichy – Tamilnadu.

    Nature of the Firm : Manufactures of Various Types of Boilers and its Accessories, Manufactures of Thermal Power Plants.

    Designation : Jr.Executive Engineer – Constructions,

    Working Period : December 2005 to DEC’2010

    Responsibilities:
    - Responsible for site Quality supervision in the erection of Boiler’s-Structurals, Pressure Parts and pipings. All systems protocol co-ordination.
    - Responsible and Execution in the fabrication & erection of Boiler’s-Structural’s, Pressure Parts and piping’s.

    - Carbon steel, alloy steel piping joints procedures controlled.
    - Erectoin for Electro Static Precipitator (ESP)

    - Maintaining the quality & procedure standards for IBR welding joints

    - Reports & inspection for Radiography and stress reliving test.

    - Fans and Feed Pumps alignment ensured like Elevation, Master level, critical Gab & bearing-Clearance.

    Projects Handled:

    S.No Client Name Boiler Type Capacity

    1 M/s.Sakthi Sugars Ltd,Tamilnadu Travel Grate 110 TPH
    2 M/s.Electro Therm (I) Ltd.,Gujarath FBC / WHRB 65 TPH / 22 TPH
    3 M/s.Shree Cements Ltd.,Rajasthan CFBC 85 TPH
    4 M/s.EMPEE Sugars Ltd.,A.P. Travel Grate 90 TPH

    ,******************************
    2) Company Name : M/s. LAKSHMI ENGG WORKS (P) LIMITED.,
    Client: M/s. ENMAS - ANDRITZ (P) LTD.,

    Designation : Quality Engineer.

    Duration : From October 2003 to November 2005

    Projects :-M/s.Tamilnadu Papers Ltd - Chemical Recovery Boiler(1x56 MW)
    M/s.Andhra Pradesh Papers Ltd -Chemical Recovery Boiler(1x56 MW)

    Responsibilities:
    - Responsible for site supervision in the erection of Boiler’s-Structurals, Pressure Parts and pipings. All systems protocol co-ordination.

    - Maintaining the quality & procedure standards for IBR welding joints

    - Reports & inspection for Radiography and stress reliving test.


    Knowledge of codes for reference:

    - ASME Section II part C for specification of Electrodes and filler wires.
    - ASME Section II part A for specification of base metals (ferrous materials)
    - ASME Section II part B for specification of base metals (non-ferrous materials)
    - ASME Section IX for welding procedure and welder’s qualification.
    - ASME Section V Specification of Non Destructive Testing
    - ASME Section 8 for Manufacturing of Pressure Vessels

    ******************************
    3) Company Name : M/s .AMMAN INDUSTRIES (P) LTD, Ranipet, Tamil Nadu

    Designation : Production Engineer.

    Activities : BHEL Boiler components like columns, ducting, casing, IBR-Piping, Dea-erator Tanks, Flakt-Wood industrial fans– Fabrications.
    Duration : From July-2001 to Sep-2003,


    Computer Knowledge:

    - Platforms : MS-Word, MS-Excel.
    - Markup Design software : AutoCAD Level-II, Solid works
    Personal Details:

    Name : R.MAGENDIRAN,
    Father’s Name : S.Ramamurthy.
    Date of Birth : 07/05/1981
    Nationality : Indian
    Languages Known : English, Hindi & Tamil
    E-Mail :- ksrmtrichy AT yahoo.com
    :- magesindia AT rediffmail.com
    Permanent Address : R. MAGENDIRAN,
    S/o,Ramamurthy, Komagudi, Lalgudi,
    Trichy-621706 (Tamil Nadu), INDIA.
    Tel: 09025422551, 0431-2908766

    Date: Yours Faithfully,
    Place:
    (R.MAGENDIRAN)