www.wheelsindia.com Wheels India Ltd Pune : Quality Assurance Engineer

[krishni84]

ENGINEER /SR ENGINEER (Quality Assurance) :

DME / B.E. (Mechanical) with experience ranging from 4 to 8 years in inspection of raw materials, hot rolled sheets, plates, sections and failure analysis, receiving inspection, sampling plans, SPC / SQC techniques, ln process inspection, final inspection and liaison with customers. Exposure to ISO/ TS 16949 will be an added advantage. Exposure to SAP will be preferred.

Salary for the above positions will be commensurate with qualifications and experience.
Please send your CV by COURIER or POST, clearly mentioning your date of birth, educational qualifications commencing with SSLC (Name of School / College, Place, year of passing, percentage of marks, rank, state whether all subjects & examinations were passed in the very first attempt), past experience (Name & address of the Company worked, date of joining, date of leaving, last designation, reason for leaving), present employment (Name & address of the Company, date of joining, date of leaving, last designation, reason for leaving), nature of work handled in the past and present employment, machines handled for technical positions, areas of expertise, details of training undergone, CTC details (monthly / annual allowances) preferably in an excel sheet .

Please mention the name of post applied for in your application and on the envelope.
We have adopted the CII Code of Conduct for Affirmative Action. Accordingly, we encourage female candidates to apply for the vacancies in our Company. Similarly, to provide an opportunity to candidates belonging to SC and ST, we encourage them to apply. Candidates belonging to SC / ST should clearly mention in their CV and application, their SC / ST status and Certificate number & date and the designation of the issuing authority.

About Us
Wheels India is promoted by the TVS Group and was started in the early 60's to manufacture automobile wheels. Today, Wheels India has grown as a leading manufacturer of steel wheels for passenger cars, utility vehicles, trucks, buses, agricultural tractors and construction equipment in India. The company supplies 2/3rd of the domestic market requirement and exports 18% of the turnover to North America, Europe, Asia Pacific and South Africa.

Applications should be sent to:
Wheels India Ltd.
Divisional Manager (HR),
Wheels India Limited (PUNE DIVISION),
Plot No. C-1, RANJANGAON GROWTH CENTRE,
P.B.No.1, MIDC RANJANGAON SHIRUR TALUKA,
PUNE DISTRICT - 412 220.
Email : pune_hr@wheelsindia.com
Website : www.wheelsindia.com

[Guest-IJT]

JADEJA GHANSHYAMSINH B.
314, NU-4,
Bhattnagar, Gandhidham
E-mail ID: ghanshyam2367 AT yahoo.co.in
Mobile No. +91 98797 77030

Career Objective: -
I would like to pursue my career with an organization that encourages Creativity and offers me an opportunity to grow my skills, ability for the betterment of the organization and myself.

Working Experience:-
L.I.C Advisor since last 4 years.

Internship Project:-
Coordinated with the Logistic activity of the IFFCO Kandla, Gandhidham
Countering the threat of Tata nano by Maruti 800.
New market development in Adani Energy Ltd

Academic Qualification:-
Sr. No. Name of Degree Board/ University Year of passing Class Obtain
1 M.B.A (Marketing) Gujarat University Result awaiting
2 B.Com Gujarat University 2005-2006 Second
3 H.S.C G.H.S.E.B. 2002-2003 First
4 S.S.C G.S.E.B 2000-2001 Distinction

Computer Skills:-
- M.S. Office, Tally.
- I have done R.H.C.E.(Red Hat Linux Certified Network Engineer)
- I have done C.C.N.A & Networking from I.I.H.T Ahmedabad.

Personal Information:-
- Gender : - Male
- Date of Birth : - 30th August 1985
- Marital Status : - Unmarried
- Linguistic Knowledge : - English, Gujarati, Hindi
- Religion : - Hindu
- Father’s Name : - Jadeja Bapalal J

Hobbies and Activities:-
Listening Indian Music, Playing chess and cricket.

[Guest-IJT]

RESUME
Rajendra Kumar Mob. No. – 9810933316, 9617781757
S/o- Shree Ram Lal E Mails- rkkbly AT yahoo.co.in
H. No. 282, Indira Nagar, rkkbly AT live.com
Post- Izat Nagar,
District- Bareilly – 243122

EXPERIERNCES – I have +17 Years in Projects, plant and machinery & Sub-Stations. Installation, commission, Operation & Maintenance.
JOB HANDLING
- Crushing and screening Plant Up to 450 Mt. / Hours –
- Metso Minerals, Sandvik, Terex Pegson ,Nawa, and Puzzolona.
HP & GP Cone Crusher, Jaw Crusher, VSI, Screens, Conveyor & Feeders. 3 Stage Max track 1000SR, XA 400 and Power screen chieftain CH-1400.
- Tunneling Equipment-
Jumbo drill as Boomer, Tamarack, and nor med (concrete Pumps) Extra.
- Mining Equipment Handling and Maintenance –
Excavator (PC 200, 300 & Ex 200), Drilling Machine (LM 100), Loader (HM 2021), Hydra Crane, Dumpers, Tippers and Compressors.
- Planning and Purchasing Stabile/ Consumable wear parts, Equipments, plant & Machinery for projects.

- Sub Station in Door and Out Door HT 11 Kv. Installation, commission, Operation & Maintenance.
LT/ MV Equipment-
Power cabling PVC, XLPE & ABC 1000 Volts. Joints end termination, Bus-Duct extra.
Sub-station Equipments MCC panel, LT/MV panel In-Door & Out-Door.
Synchronizing panel, Breaker as OCV, ACB.
Starter DOL / Star-Delta, Soft-Starter, Magnetic-starter, Liquid Resistance Starter.
AC Drive UP to 150 Kw.
- Power Generator CAT, Cummins, Kirlosker & Greaves Etc. up to 1250 Kva With synchronizing Installation, commission, Operation & Maintenance.
Project Details:
1 NOW – Sr. Project Engineer (Crusher) YEP At Gwalior MP.
M/s – Oriental Structural Engineers Pvt Ltd.
From- Aug. 14 to till Date.
JOB HANDLING
- To co-ordinate the maintenance of plants and equipment with SAP software.
- Properly maintain Excavator (PC 200, 300 & Ex 200), Drilling Machine (LM 100), Loader (HM 2021), Hydra Crane, Dumpers, Tippers and Compressors.
- To prepare reports and trends of Mechanical/ Electrical maintenance (cost/repetition/parts change etc.).
- To analysis and interpret maintenance information DG electrical panels and data.
- To co-ordinate with other departments to ensure efficient operation of plants.
- To estimate material costs and quantities, and machinery requirements.
- To make sure that all works comply with the specification and regulation
- To maintain the inventory through co-ordination with sites.
- To prepare the shut down job/check list
2 Asst. Manager (Aggregate Division) at Hyderabad
M/s - RMC Ready mix India Pvt Ltd. Mumbai.
From - 2nd Nov. 2006 to 10 Aug. Nov. 2009.
JOB HANDLING
- To prepare reports and trends of Mechanical/ Electrical maintenance (cost/repetition/parts change etc.).
- To analysis and interpret maintenance mobile crushing plant 150 TPH (Terex Pegson and Finley), stationary Crushing and screening plant up 450 TPH information and data.
- Maintenance of Excavator (PC 200, 300 & Ex 200), Drilling Machine (LM 100), Loader (HM 2021), Hydra Crane, Dumpers, Tippers and Compressors.
- To co-ordinate with other departments to ensure efficient operation of plants and equipments.
- To estimate material/ parts costs and quantities and machinery requirements.
- To make sure that all works comply with the specification and regulation
- To maintain the inventory through co-ordination with sites.
- To prepare the shut down job/check list
3 Project engineer (In charge)-
Ms- ASECO ENGINEERS L-16, LAJPAT NAGAR III, BASMENT, NEW DELHI.( Unit Of Ankit Electricals Pvt. Ltd.)
(Engineering Service provider for all leading construction company in India as M/s- Patel Engineering Ltd, Soma Enterprises, Metso Minerals, Power Line, Jubilant Organisys, Regent Drugs, Gammon India, Delhi Metro Rail Project, Hydel Construction Pvt. Ltd and Kajima Daewoo)
From - 4th April 2002 to 30 Sept 2006.
JOB HANDLING
- To co-ordinate the maintenance of plants and equipment. Like a sub station, power house and power Generators’
- To prepare reports and trends of Mechanical/ Electrical maintenance (cost/repetition/parts change etc.).
- To analysis and interpret maintenance information and data. Power House and sub station. Up to 11000 volt in door and out door, generation and distribution with step up and down. Power cabling, jointing and end terminations.
- To co-ordinate with other departments to ensure efficient operation of plants.
- To estimate material costs and quantities, and machinery requirements.
- To make sure that all works comply with the specification and regulation
- To maintain the inventory through co-ordination with sites.
- To prepare the shut down job/check list.
- Crushing and screening Plant up 450 TPH Maintenance, installation and commissioning.
4 Project engineer Electrical-
SMSUNG CORP, (E&C) GROUP.5/27,SARVPRIYAVIHAR, N. DELHI.
Project- DHAULI GANGA H.E. PROJECT, STAGE 1, LOT 2, DHARCHOLA, PUTHORAGAR (UA)
From - 27th Mach2001 to 31st March 2002.
- To co-ordinate the maintenance of plants and equipment. Like a sub station, power house equipments and power Generators’ up to 1250 kva synchronize units.
- To prepare reports and trends of Mechanical/ Electrical maintenance (cost/repetition/parts change etc.).
- To analysis and interpret maintenance information and data power House and sub station. Up to 11000 volt in door and out door, generation and distribution with step up and down. HT Power cabling, jointing and end terminations.
5 Site in charge-
SCOPIC INDIA ENGINEERS Pvt. Ttd.
Project- BTRA HOSPITAL & MEDICAL RESEARCH INS. NEW DELHI.
From - 11th May2000 to 24th March 2001.
- To co-ordinate the maintenance of equipment. Like a sub station equipments and power Generators’ up to 1000 kva.
- To prepare reports and trends of Mechanical/ Electrical maintenance (cost/repetition/parts change etc.).
- To analysis and interpret maintenance information and data. Crushing Plant, power House and sub station. Up to 11000 volt in door and out door, generation and distribution with step up and down. Power cabling, jointing and end terminations.
6 Site Engineer-
LEO INDUSTRIES G-162 SEC.22 NOIDA.
Project-MICO 4TH LOCATION, SITAPURA
IND. AREA, JAIPUR.
From - 8th Sep.1998-to-8th May 2000.
7 Site Engineer-
VERMA ELECTRICAL (Govt. contractor)
(Govt.Contactor) From - 1991-to -1998.
Personal Profile:-
NAME - RAJENDRA KUMAR
FATHER’S NAME - Shri Ram lal
DATE OF BIRTH - 13Th. August 1969.
EDUCATIONAL QUALIFICATION - 10Th. U.P. Board.
TECHNICAL QUALIFICATION - 1-Dip. In Electrical.
1991 I TDC (I) Bareilly.
(Under Govt. Of U.P.)
- Dip In Computer
- Safety Training
- By National Safety Council Maharashtra Chapter,
- SAP software Training.
ADDRESS - C/o- Mr. Bari Lal
132, Sultan Pur village, Meharoly,
New Delhi- 110030,

PERMANENT ADDRESS - 282, Indera Nagar, Izat Nagar,
Bareilly -243122.
+91-9837343746.
NATIONALITY - Indian
I hereby declare that the above particulars are true to the best of my knowledge and belief.
YOUR’S SINCERELY
Date-
(RAJENDRA KUMAR)

[baban Tikkal]

Curriculum Vitae
Name : - TIKKAL BABAN BAPUSAHEB
E-Mail Address : - babaninpoona AT rediffmail.com,babaninpoona AT gmail.com
baban AT kosiplast.com

Educational Qualification :-
S N Exam of passed Academic year Board / university % of mark Class obtained
BACHEALOR OF INSTRUMENTATION & CONTROL ENGINEERING
1 B.E Instru & control 2004-2005 Pune University 56.46% Higher 2nd
2 H.S.C 1997-1998 Maharashtra state
Board 58.00% Higher 2nd
3 S.S.C 1995-1996 Maharashtra state
Board 60.80% 1st Class
Objectives : -

To have an excellent professional career on a challenging note, through which I can gain an opportunity in proving my skill set and be a part of the organization progress.
PROFESSIONAL EXPERIENCE : -
1) SENPRA PRESING PVT.LTD. WADGAON, Pune-
As a Q.A. Engineer(Vendor Development + Incoming)from 24 June 2005 to 10 march 2006
This company is vendor of National panasonic, Behr India India ltd, Videocon Appliances. Chitegaon, PMP Component.Satara, Dali & Sameer Pvt.Ltd Chinchawad involving in manufacturing Pressed & Molding Component.–like Liver,Moter Fan,Washer etc.
Rolls and Responsibilities :-
01) Handling the Receiving Product Quality related all activities.
02) Instrument & Gauges Calibration.
03) Co-ordination with supplier.
04) Team member of new supplier development,
05) Reporting to Q.A Manger & G.M. (Manufacturing)
06) Preparing of Supplier Quality Rating.
07) Preparing Quality Plan.
08) Preparing Control Plan.
09) Preparing Inspection check sheet & Inspection report.
10) Preparing Quality format,
11) Preparing work instructions,
12) Making SPC & MSA.
13) Preparing in process Check sheet.
14) Member of Cross functional team.
15) Process or Product Audit for new product.
16) Involved in handling customer complaints
17) Preparing Monthly MIS
18) Parato analysis & pokayoke for process defect.
Instruments used :-
1) Vernier caliper 2) Micrometer 3) Thickness Gauge (Plating) 4) Dial Gauge 5) Height Gauge 6) Profile projector 7) Hardness Tester 8) Bevel Protector
2) OM SAI DECOPLAST PVT.LTD.KOREGAONBHIMA, Pune-412216
As a Q.A. Engineer (INCOMMING & IN-PROCESS) From 12 March 2006 to 10 SEPT 2006
This company is vendor of Whirpool India ltd, Feber Heatcraft ltd, Jabil Circuit India ltd, LG Electronics India ltd, Videocon Appliances India ltd, and Aurangabad.Kosi Plast pvt ltd, koregaon Bhima involving in manufacturing Plastic Mould, Plastic Molding components & Precious Pressing Dies & Precious Component.
Rolls and Responsibilities : -
01) New Product Inspection.
02) Inspection of precision Parts of mould. (Inserts, Electrode etc.)
03) Instrument & Gauges Calibration.
04) Coordination with supplier.
05) Reporting to Q.A.Manger & G.M. (Manufacturing)
06) Preparing Quality Plan.
07) Preparing Control Plan
08) Preparing Inspection reports.
09) Preparing Quality format,
10) Making SPC & FPA
11) Preparing in process inspection Formats.
12) To attain Customer complaint.
13) Making History Card of Component.
14) OS&D Maintained
15) Implementation of 5, S activity & Kaizan on shop floor.
Instruments used :-
1) Vernier caliper 2) Micrometer 3) Thickness Gauge (Plating) 4) Air Gauge 5) Height Gauge 6) Profile projector 7) Hardness Tester 8) Bevel Protector 9) Pin Gauge
3) KOSI PLAST. PVT.LTD.KOREGAONBHIMA, Pune-412216
As a Q.A. Engineer(INCOMMING &IN-PROCESS)From 12 SEPT 2006 to Till Date
This company is vendor of Whirpool india ltd, Feber Heatcraft ltd, Essbee India ltd, LG Electronics India ltd, Sharp India ltd, IKEA TREADING LTD (SWEEDON) WHIRLPOOL OF SWEEDON, Union Batteries, involving in manufacturing Plastic Mould, Plastic Molding components, Screen Printing, Painting, Assembly of CTV Cabinet & Refrigeration parts, Lekman Box (Export Item),Andrew Cummuni.pvt Ltd,Symphony Limited. Cooler assembly.ETC.
Rolls and Responsibilities : -
01) New Product Inspection.
02) Inspection of precision Parts of mould. (Inserts, Electrode etc.)
03) Instrument & Gauges Calibration.
04) Coordination with supplier.
05) Reporting to Q.A.Manger
06) Preparing Quality Plan.
07) Preparing Control Plan
08) Preparing Inspection reports.
09) Preparing Quality format,
10) Making SPC & FPA
11) To study Environmental Management System (EMS)
12) OS & D Maintained.
13) Treasability of Material
14) One point lesson
15) Implementation of 5S activity & Kaizan on shop floor.
16) Measurements System Analysis (MSA)
17) To study Gauge R & R
18) Preparing Kanban system
19) PPAP, APQP Documentation
20) To attain Customer Complaint
Instruments used :-
1) Vernier caliper 2) Micrometer 3) Radius gauge 4) Radius Gauge
5) Flow Cup for viscosity measurement 6) Dial Gauge 7) Height Gauge 8) Profile projector 9) Bevel Protector 10) Gloss meter 11) Pin Gauge
12) High Voltage tester for Conductivity 13) Torque Driver 14) IR Tester
15) Tachometer 16) Tachometer 17) frequency voltage converter
Also the knowledge of ERP System (Enterprises resource planning).

[Guest]

RESUME
PRAKASH KUMAR
Email id : - prakashkumar495 AT gmail.com
APPLICATION FOR THE POST OF “MECHANICAL TECHNICIAN”
OBJECTIVE
To accept the challenges with full confidence and cum out with positive attitude. With more experience I want to sharpen my technical skills so that in I can serve my organisation in faithful way.
ACADEMIC QUALIFICATION

- Passed Matriculation from J.S.E.B, Ranchi in the year of 2004.
TECHNICAL QUALIFICATION
- Completed two years training from Industrial Technical Institute (I.T.I),
Jamshedpur, in the trade of “FITTER” from 2004 to 2006.
WORKING EXPERIENCE
- Worked as a MECHANICAL TECHNICIAN in TATA IRON & STEEL CO. LTD from August 2006 to October 2009.
- Working as a MECHANICAL TECHNICIAN, in STEEL STRIPS WHEELS LTD. Jamshedpur from 24th September 2009 to till continue in service.