www.wartsila.com India Ltd Chennai : Shift Incharge

[krishni84]

Position : Shift Incharge

Job area Engineering

Job description
To plan, organise, coordinate, supervise and control the activities in the shift at an O&M site. To manage the complete Power Plant functions correctly and efficiently as per laid down procedures/ contract.
Ensuring the proper functioning of all equipments, attending to the problems encountered and developing solutions to counter them.

Responsibilities
1. Supervision of all the equipments for their functioning and attending to all the problems encountered.
2. In case of major problems inform superiors for guidance and instructions.
3. Responsible for activities involved during shift and statutory boiler operations.
4. To continuously monitor/measure the contract benchmarks, perform and analyse the data, take corrective actions, in order to achieve desired level of technical performance.
5. Plan shift activities ensuring implementation of safe work practices of various equipments like, boiler, turbine, coal handling plant, cooling tower, feed water pumps, DM plants, etc.
6. To plan and allocate work, prepare shift plan, train and develop staff to maintain/service equipment, provide performance feedback in order to achieve plant performance targets through management of staff.
7. To gather and analyse data, prepare and submit shift report.
8. To comply with the safety standards, co-ordinate with clients for resources, conduct audits, take corrective actions train staff in safety drill in order to avoid accidents and damage to property and life.

Requirements
Bachelor of engineering ( Mechanical)
6 - 9 years of experience at thermal power plan

About Us:
Wärtsilä is a global leader in complete lifecycle power solutions for the marine and energy markets. By emphasising technological innovation and total efficiency, Wärtsilä maximises the environmental and economic performance of the vessels and power plants of its customers. In 2009, Wärtsilä's net sales totalled EUR 5.3 billion with 18,000 employees. The company has operations in 160 locations in 70 countries around the world. Wärtsilä is listed on the NASDAQ OMX Helsinki, Finland.

Contact Us:
Wärtsilä India Ltd.
Laxmi Chambers,
30, Anna Salai,
Saidapet, 600 015
Chennai, India
Tel +91 44 2230 1080 to 88
Fax +91 44 2230 1089
Fax +91 44 2230 0477
Click to Apply : https://careers.fi/wartsila/add_application.cgi?job_id=4123&language=uk&layout=
www.wartsila.com

[Guest-IJT]

DEEPANKAR SEN sen.deepankar84 AT gmail.com
Ph.No: +919905786629
________________________________________
ELECTRICAL ENGINEERING
CAREER OBJECTIVE: Excelling as a professional in Electrical Engineering with a growth oriented and reputed organization that utilizes my technical abilities to the optimum possible and provides opportunities to achieve both personal and professional goals.


SKILLS AND ABILITIES
- Qualified B.Tech (Electrical Engineering) with excellent technical proficiency and practical experience, gained while working on different projects as part of professional involvement.
- Can handle multiple tasks to meet deadlines in pressure situations.
- A team player who thrives on working in diverse teams and challenging environment.
- Excellent comprehensibility detailed and planned observation.
- Open-mindedness to new ideas.

CHARACTERISTICS AND TALENTS
- Sincerity and punctuality at work.
- Adaptability to different environment and ability to work in stressful conditions
- Right attitude towards work
- Willingness to work at odd hours.

TECHNICAL/FUNCTIONAL COMPETENCIES

1. Basic knowledge about

(i) Basic Electrical systems, Machines.
(ii) HT/LT switchgears.
(iii) Panels and drawings.
(iv) Embedded system.
(v) Fundamental knowledge on PLC, LADDER LOGIC, Logic gates.
(vi) Architecture of Micro-Processor and Micro-Controller.

2. Functional knowledge and hands-on experience.

(i) Auto CAD 2007.
(ii) Maintenance schedule and necessary electrical tools.
(iii) Common problems and trouble shooting on electrical systems.
(iv) In-depth understanding of electrical drawings.
(v) Designing of control circuits, Power circuits, SLD, GA of electrical panels.

3. Knowledge of technical and commercial contractual terms.

1. Computer proficiency

a. Software exposure.
(i) Insightful technical knowledge of software development language C.
(ii) MS Word
(iii) MS Excel
(iv) MS PowerPoint.
(v) Auto CAD 2007



EXPERIENCE
2 year 1 Months.

EMPLOYEMENT HISTORY
NATIONAL POWER AND TECHNOLOGY CORPORATION. 15/04/2008 - Present
Site Engineer.

Current Project.
- Responsible to carry out electrical work of 8000T Robotic control press through PLC at NEEPAZ V FORGE INDIA LTD, Aurangabad.

Previous Project
- To supervise the LT electrical work of 33KV switchyard of ADHUNIK POWER & NATURAL RESOURCES LTD.

Past Project.
- Responsibilities includes supervision of electrical work at SINTER PROJECT of Rashmi Metaliks Ltd.

LIFE BUSINESS PROJECTS PVT LTD. 25/06/2007 - 31/03/2008
Trainee Engineering Consultant.
- Project handling team leader, which include forming of efficient balanced team and assigning appropriate project.
- Handling own project on “POWERLINE FAULT ANALYSIS MONITORING & LOAD SHARING SYSTEM USING MICROCONTROLER”.
- Embedded training arranged by the organisation.

ACADEMIC PROJECTS
Distribution of 3-phase power in new college building. 06/02/2007 - 05/03/2007

Review:
- Distribution of power is one of the major factors in any generating plant, substation, and projects.
- Responsible for calculating of total load in every room, practical labs, every floor of our new college building.
- Calculate the size of the power cable required.
- Selecting the appropriate rating of switch gear for particular load, practical lab, electrical equipments and machine.

INPLANT TRAINING
NATIONAL HYDROELECTRIC POWER CORPORATION LTD 01/07/2006 - 31/07/2006
Key Learning’s
- Gained excellent exposure to power generation plant using water.
- Transmission and distribution of power.
- Working of synchronous generator having generating capacity of 170 MW each.
- The report has a brief study of power plant of N.H.P.C.


DISHERGARH POWER SUPPLY Co. LTD 06/12/2005–15/01/2006
Key Learning’s
- Operation and maintenance of Thermal Power plant having installed capacity of 15MW.
- Operation and maintenance of transmission and distribution having 37.5 MVA transformer.


EDUCATION & PROFESSIONAL DEVELOPMENT
B.E (ELECTRICAL ENGINEERING), 2007
Aryabhatta Institute of Engineering and Management, Durgapur, 80.90%

INTERMEDIATE, 2002
I.S.C.E, 57%

10th , 1999
I.C.S.E., 61.40%

OTHER RELEVANT PARTICULARS
Permanent Address
Deepankar Sen
48/f, Mandhirpath,
Shivnagar, Kadma,
Jamshedpur, Jharkhand-831005
Ph.No: +919905786629.

HOBBIES: Listening to music, playing my favorite sports like Cricket, computer games like NFSU, Counter strike, playing Guitar.

D.O.B: 05/10/1984

Declaration: I hereby declare that the above mentioned details are true to the best of my knowledge.

[Guest]

RESUME
Post Applied For : Technical Manager
MOHAMED THAMBI MARAICOIR.S
B.E (Mech) (Marine Chief Engineer)

Email : info AT albatoolrepairs.com ,
maraicoir AT rediffmail.com
Website : www.albatoolrepairs.com
Professional knowledge A qualified Marine engineer with extensive experience in Human resource management, Plant installation, Maintenance, Process control, Instrumentation & Troubleshooting on Heavy machinery, Main propulsion engines, Power generation, Boilers, Centrifuges, Pumps etc. seeking a challenging & professionally rewarding techno-managerial position in a similar environment.
Professional Qualification Holding the Certificate of Competency as Class I MEO (Motor) issued by Government of India-Ministry of Surface Transport since June 1999 with
Chemical and Petroleum, Dangerous Cargo Endorsements.
B.E Graduate (Mechanical Engineering) (1985-1989)-Chennai University.
Present & Previous jobs
Working as a Manager and Director in Albatool ship repair company in GOA and in Chennai.(At present)
Worked as a Manager and Director in Albatool ship repair company in Dubai. (In charge of UAE operations).
Worked as Senior EHS Officer in DUBAI PORTS AUTHORITY.
DRIVING LICENCE UAE license (light vehicle),Indian Driving Lience
ABOUT ME
I am a successful marine Engineer with immense knowledge, trouble shooting skills and experience. I have worked on various reputed companies as Chief Engineer on various types of vessels such as chemical tankers, oil tankers and bulk carriers. I have sailed with companies like Tanker Pacific, OMCI, Univan, Fleet Management, Great Eastern, SCI and ETA.I have worked in Chennai port trust for about 3 months as a Dredger superintendent Engineer on contract basis I have lots of hands on experience on various types of engines, boilers, compressors, purifier, Turbo chargers, hydraulic machineries, crane motors, hydraulic winches etc. I am an expert in overhauling various types of Framo pumps and turbochargers. I have designed, fabricated and erected lots of pipe works on various ships. During my assignments onboard ships I have had lots of exposure with Oil Major Inspections, Internal audits and Port State Inspections .I have worked in Chennai Port Trust on contract basis as an Marine superintending Engineer officer. I have done many CSM surveys, load line surveys, Boiler surveys, cargo gear surveys, safety equipment surveys, Annual surveys, LSA/FFA surveys, pre/post Dry docking survey, IOPP equipment survey etc on various ships along with classification society surveyors. I have done lSM audits, ISO 14001, OHSAS 18001 and ISPS audits onboard along with classification society surveyors. I have in-depth knowledge in Port operational safety .In short I am an Engineer with a positive approach, with lots of hands on experience and knowledge to handle any project meticulously.
At present working as a Manager/Director in a ship repair company in Goa.
Skills :
- Technically sound to execute Chief Engineer’s responsibility in Marine Engineering & associated technical field.
- I am an expert in any type of Turbocharger and I am good in Frahmo pumps
- I can individually overhaul and erect all types of machineries such as main propulsion units, generator sets, boilers, purifiers, compressor, refrigeration units, air conditioning units etc
- Sound knowledge of Port Ordinance, Port Rules & Regulations, Local and IMO requirements.
- Trainer for HSE Topics
- Professional dealing of issues related to Customers to their & corporate satisfaction.
- Excellent interpersonal relationship with inter departments.
- Strong communication skill in English.
- Strong computer skill & office administration.
Turbocharger skills
- I have immense knowledge in overhauling of all types of turbo chargers.
- I have worked in various VTR series of turbochargers.
- I have done trouble shooting on turbo charger operations and diagnosed the problems for boosting up the turbocharger operation, consequently increasing the engine performance.
- During dry docks I have also learned about how to do static and dynamic balancing of turbocharger shafts.
- I have studied in detail regarding the design and construction of turbochargers such as selection of blades, roots of blades, material used in the selection of blades, bonding of blades, type of bearing used, what type of lubrication used, nozzle ring used etc
- Any turbocharger and the faults and remedies can be analyzed by the draw cards and other power diagrams using instruments.
- I have experience in both pulse type and constant pressure type of turbo chargers.
Present Employment Responsibilities :
1. June 2011till now; Working as a Director and manager in a ship repair company in Goa.
2. May 2008 to May 2011 : Working as a Director and operation manager in a ship repair company,dubai for about 3 years till date. I am incharge of all dubai dry dock activities in dubai drydock.
3. May 2006 To Apr 2008 :- As Senior Port EHS Officer – Dubai Port Authority (DPA).
- To provide necessary advices on acceptability of ships intending to berth in Dubai Port and matters related to cargo operation, ship repair, pollution prevention measures in accordance with DPA rules & regulation, International Maritime Organization (IMO), Federal Laws and Dubai Municipality Local Order and safe handling operations of hazardous cargoes in compliance with IMDG Code stowage/labeling/acceptability requirements.
- To carryout ISM inspections on vessels calling Dubai ports and to ensure compliance with International, Federal, DPA Rules & Regulations, MARPOL and SOLAS requirements.
- To monitor Oil & Chemical Tanker Ships operations and ensure Safe transfer of Highly Flammable Petrochemical products, Hazardous Chemicals, etc in accordance with ISGOTT requirements.
- Preparation of written procedures, standards and work practices to assist workforce to meet requirements of legislation and to advance the current level of EHS skill.
- To monitor and control ships operation within the port to comply with EHS requirements and to review and approve ship repair companies intending to perform their activities within Dubai Ports.
- To perform as competent authority to approve and monitor permit to work system in the operational areas involving high & low potential risks such as Tanker Berths, Sewage System etc.,
- To provide safety and environmental advice in planning and development issues including new developments and strategic direction. This includes developments undertaken by the corporation, such as the constructions of new port facilities such as terminals, warehouses, and maintenance workshop and process operation by external contractors/consultants. Current role requires review of drawings and projects report for port developments prior to obtaining an approval to proceed. My primary role is to ensure appropriate consideration has been given to safety and environmental aspects of design. All aspects of our operations and services undergo risk assessments.
- Liaise with port customers and other governing bodies such as ship repair companies, shipping agents, surveyors, oil companies , vessel owners ,Port state control, Dubai municipality and Federal agencies etc.,
- To develop and deliver safety and environmental training to key areas of the corporation. Basic safety induction, environmental awareness, safety training for specialized areas of operations such as ship repair, Maintenance, Hazardous material handling, confined space entry, tanker berth operation, ship- shore checklist and safety in cargo operation.
- Report preparation and delivery in both written and oral formats form a significant part of my current role. Monthly progress reports, together with annual reporting to the management are fundamental to my current position.
- Plan, organize and execute hazardous material handling operations on leaking Hazardous container.
- To implement the requirements of ISO 9001, ISO 14001 & OHSAS 18001 for continual improvements in Dubai Ports Authority. Provide safety advice to senior management on issues associated with Health, Safety & Environment.
- To manage the team of inspectors to carryout Port EHS functions to achieve corporate goal.
- Emergency coordinator, in case of oil, chemical spills and accidents in the port and ship repair activity and conduct Accident Investigations and issue advice on corrective and preventive actions in order to prevent re-occurrence.
Trainings given by me to the clients

a. Ship Repair Supervisor Training course(Management level)
b. Ship Repair Surveyor Training course (Management level)
c. Ship Repair workers Training course
d. Safety Officers of the ship repair contracting companies(Management level)
e. Permit to work system on ship repair(Management level)
f. Permit to work system on Tanker Terminals(Management level)
g. SHIP SHORE CHECKLIST TRAINING FOR TANKER TERMINAL PERSONNNALS.(Management level)
h. Security guard training in tanker terminals.
I have been issued with surveyor certificate by NKK (classification society) to carry out CSM surveys onboard vessels of Tanker Pacific. I have done many CSM surveys, load line surveys, Boiler surveys, cargo gear surveys, safety equipment surveys, Annual surveys, LSA/FFA surveys, pre/post Dry docking survey, IOPP equipment survey etc on various ships along with classification society surveyors. I have done lSM audits, ISO 14001, OHSAS 18001 and ISPS audits onboard along with classification society surveyors. I have in-depth knowledge in Port operational safety .In short I am an Engineer with a positive approach, with lots of hands on experience and knowledge to handle any project meticulously.
DRY DOCKING
I have nine months of experience in Al jadaf Ship repair yard as an authority controlling the permit to work system and other facility operations.
I have done five dry docks during my sailing tenure; they are as follows, Dubai dry dock, Chennai Chokani floating dry dock, Bahrain ASRY dry dock, Panama dry dock and Xeng xi, China. My responsibilities while in dry dock are as follows :
1. Responsible for the company to get the ship dry-docked, and successfully accomplish all the jobs in a stipulated time in a cost effective way.
2. Compilation of all information such as job specification, equipment details, spares required, staging required, safety procedures to be followed etc, and address the same to the yard.
3. Clarifications with yard facility of any unclear item in the job specification by conducting meetings on regular basis.
4. Prepare the ship according to pre arrival checklist for safe dry docking.
5. Clarification and agreement with yard representative of required condition for the vessel on arrival as well as requirements for docking, taking into consideration specified work and ship’s procedures.
6. Meeting with yard Representative and Staff on arrival and introduces them to the ship’s normal practice, Safety regulations and procedures.
7. Identification on site of specified works with the Services concerned and agreement on technical Aspects according to the ship’s practice and capabilities.
8. Day to day jobs such as propeller shaft withdrawal spares renewed, surveys conducted and any other jobs done to be reported to office and record as per ISM standards.
9. Ensure all the jobs were done in a safe manner and completed without any defects as per ISM standards.

SHORE BASED EXPERIENCE .
At Present I am working as Operation Manager in Albatool Ship Repairs in Goa and in Chennai.
I have worked as Operation manager in Albatool Ship Repairs in Dubai.
I have worked as a Senior EHS Officer with DPA since May’06. I am in charge of Tanker Terminals of Jebel Ali free zone.
I have written tanker terminal operating procedure for the DPA.
Various new projects including Shell, Enoc were handled by me.
I have written standard operating procedures for DPA.
Training courses as mentioned above are conducted by me.
Vessel inspection for ISM compliance as an authority.
Pollution control inspections were undertaken by me.
Bunkering rules and regulations were framed and implemented.
Other port activities related to Environment, Health and Safety were handled by me inside the port.
CHENNAI PORT TRUST (SAMUDRA SHIPPING SERVICES)
I have worked on contract basis for SAMUDRA SHIPPING SERVICES, CHENNAI, have implemented ISM standards to the company and obtained DOC.
I have worked as dredger Engineer on contract basis for Chennai port Trust.
ISM AUDITS ONBOARD .
I have done Training on ISM code conducted by Fleet Management Training Institute, the certificate Number is TISM/FMTI/072/03.I have obtained the experience on conducting ISM audits onboard, implementing ISO standards onboard, company’s quality management system, company’s Environmental Management Program
Have done internal ISM audits on almost all ships that I have sailed in. Have also prepared the ships for external audits conducted by various classification societies such as Lloyds, NKK, and ABS etc.
ISO 14001 & OHSAS 18001 .
I have done Training on ISO14001, (the certificate no : TISO14001/FMTI/403/03) and OHSAS 18001(OHSAS 18001/FMTI/831/03.I have implemented the ISO 14001 and ISO18001 standards on many ships, that I have sailed in.
1. Have learned the purpose of an EMS and explain the principles, processes and techniques used for assessment and management of environmental aspects and impacts.
2. Have learned the purpose, content and interrelationship of ISO14001, ISO 14000 series guidance standards and the legal framework related to an organization’s environmental aspects.
3. Have learned to interpret the requirements of ISO 14001, OHSAS18001 in the context of an audit.
4. Have learned to manage, plan, conduct, report and follow up an audit in accordance with ISO19011 :2002

NON DESTRUCTIVE TESTING TECHNIQUES LEVEL-II .
I have done this course in a reputed concern by name NDT radiant services, Have obtained LEVEL-II on four disciplines such as Penetrant Testing,Magneting particle testing, Ultra sonic Testing and Radiographic Testing. I have obtained immense knowledge on finding out flaws, laminar defects, cracks, intrusion, and stress points, in any job object. I can successfully locate linear defect and volumetric defect in an object by using above mentioned techniques. With this certificate I can survey and certify the component parts of any equipment of any company.
SEA SERVICE /EXPERIENCE/RESPONSIBILITIES(previous job experiences)
Apprenticeship training at Chennai Port Trust between 05/10/89 to 05/02/91.
I have joined as Junior Engineer on a bulk carrier EMIRATES TRADING AGENCY on Oct 1991, Served as fifth Engineer in SCI, INDIA between 11/8/92 to 04/08/93,
Served as fourth Engineer in ETA between 11/12/93 to 15/12/94,
Served as 3rd Engineer in ETA between 12/04/96 to 26/6/96,
Served as 3rd Engineer in UNIVAN between 31/08/96 to 8/4/97,
Please see sea experience as attached.

ONBOARD SHIP EXPERIENCE (senior level)
COMPANY VESSEL TYPE ENGINE BHP RANK FROM TO DURATION
TANKPAC M.T.GATEWAY CRUDE OIL TANKER B&W 6S 70ME 21000 CHIEF
ENGINEER 14/12/05 04/02/06 1M/20DAYS
TANKPAC M.T.SAVANNAH CRUDE OIL TANKER SULZER 10400 CHIEF
ENGINEER 31/03/05 13/08/05 4M/15DAYS
FML,
Hong Kong M.T.CHEMBULK SHANGHAI CHEMICAL TANKER AKASAKA
MITSUBISHI
6UEC52LA 9600 CHIEF
ENGINEER 16.1.04 11.7.04 5M/26 DAYS
FML,
Hong Kong M.T.BOW WIND CHEMICAL TANKER AKASAKA
MITSUBISH
6UEC37LA 4200 CHIEF ENGINEER 29.7.03 21.11.03 3M/13DAYS
FML,
Hong Kong
M.V.SPAR EIGHT BULK CARRIER SUL ER
6RLB66 13500 CHIEF ENGINEER 2.6.02 10.1.03 6M/8DAYS
FIVE STARS M.V.JAG VIKAS BULK
CARRIER SULER
7RND 68 11550 CHIEF
ENGINEER 30.1.02 13.4.02 2M/15DAYS
FIVE STARS M.V.JAG RANI BULK CARRIER B&W
6L60MCE 8420 CHIEF ENGINEER 14.1.01 30.6.01 5M/16DAYS
OMCI M.T.NILE CRUDE
OIL TANKER SU LER
4RLA90 13600 SECOND
ENGINEER 5.8.00 21.11.00 3M/16DAYS
OMCI M.T.LIMAR PRODUCT
TANKER B&W
6S50MCE 6290 SECOND ENGINEER 23.10.99 3.4.00 5M.11DAYS
OMCI M.T.SHANNON CHEMICAL
TANKER B&W
6S50MCE 9060 SECOND ENGINEER 12.9.99 22.10.99 1M/10DAYS
OMCI M.T.ALMA PRODUCT
TANKER B&W
6S50MCE 8555 SECOND ENGINEER 14.4.98 15.10.98 6M/20DAYS
WAM M.V.GEM OF
MADRAS B.C B&W
6L60MCE 9120 SECOND ENGINEER 4.9.97 19.2.98 5M/15DAYS
UNIVAN M.T.GREAT
PROMISE PRODUCT
TANKER PIELSTIC 11700 THIRD
ENGINEER 31.8.96 8.4.97 7M/8DAYS

I have obtained MOT class I motor certificate on june,1999.I have got my command as Chief Engineer on 14/01/2001.
As a Chief Engineer my responsibilities are as follows,
Experience Tanker Pacific/OMCI/Fleet Management/Univan
2nd Engineer / Chief Engineer
- Extensive experience in managing and motivating a team of marine engineers
- Extensive experience at managerial level in work planning and allocation of resources
- Solely responsible for the overall monitoring, control, overhauling of all machinery onboard the vessel
- Solely responsible for monitoring the performance of heavy duty slow speed marine propulsion engines upto 20,000 bhp and making appropriate adjustments to get optimum power output
- Solely responsible for condition monitoring of slow speed marine propulsion engines upto 20,000bhp and supervising all overhauls as per vessel's Planned maintenance system
- In charge of team for control and maintenance of Diesel generators for power generation upto 1MW
- Experienced in monitoring and complete overhaul of Turbo-chargers
- Supervisory experience in monitoring and maintenance of electric motors
- Well versed in interpreting complex engineering diagrams and electrical circuit diagrams for the purpose of carrying out maintenance and/or Procurement of spares etc.
- Experienced in monitoring, control and complete maintenance of Oil fired boilers used for heating of Heavy fuel oil and fuel oil storage tanks
- Extensive experience in the running and supervision of complete maintenance on all types of Rotating equipments such as Centrifugal, Screw, Reciprocating, Variable displacement pumps, Air-compressors and Centrifuges used in the purification of heavy fuel oil etc.
- Extensive supervisory experience in monitoring, maintenance and overhaul of Air-conditioning plants
- Extensive supervisory experience in monitoring , maintenance and overhaul of refrigeration plants and refrigerated containers for the carriage of chilled and frozen cargo
- Extensive supervisory experience in monitoring and total maintenance of Desalination plants, both Shell and Tube type and Plate type
- Extensive experience on various types of Heat exchangers
- Extensive experience with Domestic and Sanitary water supply management systems
- Extensive experience in wastewater management and running and maintenance of Sewage treatment plants certified by the United States Coast Guard (U.S.C.G)
- Experienced with Hydraulic machinery and systems
- Extensive supervisory experience in guiding skilled fitters, welders in Fabrication and Piping
- Well versed with Preventive maintenance systems
- Thorough with Spare parts inventory control and Procurement of new spares keeping in mind future requirements as per upcoming maintenance procedures in the Preventive maintenance system
- Extensive experience on Container vessels , reefers and Gas carrier
- Carried out extensive dry docking steel renewals & repairs on one gas carrier in the fleet.
- Assisted the Technical Superintendent ashore in budgetary control by carrying out proper onboard maintenance and judicious use of spares
- Responsible for inspection and overall maintenance of all fixed and portable Fire extinguishing systems and appliances
- Well versed with conducting Safety training, Pollution prevention and Fire fighting drills as per company policy, for all crew onboard the vessel
- Familiar with ISM, SMS, SOLAS, MARPOL, ISPS, COSWP regulations
- Well versed with shipboard QA/QC management systems
- Well versed with working in regulated environments that require Permits to work such as Hot work permits, Gas-free permits, Working aloft permits, Enclosed space entry permits etc.
- Experienced in carrying out Risk assessment procedures and Accident investigations to determine Primary and secondary causes and issue guidelines for preventing reoccurrences
- Well versed with Health, Safety & Environmental regulations & Codes of Safe working practices with regard to the marine environment
- Responsible for on the job staff training, ongoing appraisal and making out confidential appraisal reports for advising senior management ashore
TECHNICAL VALUE ADDED COURSES
1. ‘NABCO’ M/E Maneuvering &Control course (MANAGEMENT LEVEL)
2. ENGINE ROOM RESOURCE MANAGEMENT/ENGINE ROOM TEAM MANAGEMENT
3. MARINE ENVIRONMENT PROTECTION COURSE
This course deals with Marine pollution and its consequences, Marpol 73/78 annexes and amendments, Bilge water Management, Oily water separator workshop, Oil record book, Sludge Management and Incineration, Sewage regulations and treatments, Introduction to oil pollution etc.
4. ENERGY CONSERVATION COURSE
This course deals with the Environment and the role of fossil fuels, materials use and waste management, Minimising Prevention and Emission Controls.
5. TRAINING FOR ISM CODE/ ISO14001/ OHSAS18001
6. SHIP SECURITY OFFICER COURSE
7. NDT LEVEL –II , IN P.T,M.T,U.T AND R.T
8. OHSAS 18001 –INTERNAL AUDITOR COURSE
9. RISK ASSESSMENT AND HAZARD IDENTIFICATION
10. OIL SPILL RECOVERY PROCEDURES
STCW 95 COURSES CERTIFICATION .
1. Advance Petroleum Tanker Safety Courses
2. Advance chemical Tanker Safety Courses
3. Basic Fire Fighting
4. Advanced Fire Fighting
5. Medical First Aid at Sea
6. Basic Survival Technique
7. Proficiency in Survival Craft and Rescue Boat
8. Personnel Safety and Social Responsibility

[Guest]

M.ARUMUGASAMY
E-mail : samypro2011 AT gmail.com .
Objective :
To seek a career in a reputed firm, where I can utilize my knowledge and abilities for the growth of the organization as well as to mould myself into a better individual.
Educational Qualification :
Course Institution University/Board Year of Passing Percentage
B.E(Prod)* Mookambigai College of Engineering
Pudukottai. Anna University, Trichirappalli.
2011
74.62%
D.M.E Samuel Polytechnic
College Mudivaithanendhal.
DOTE Tamilnadu
2008
76.04%
HSC J.B.Higher Secondary School.
Puthiamputhur.
State Board.
2003
58.62%
SSLC J.B.Higher Secondary School.
Puthiamputhur.
State Board.
2001
76%
Industry exposure :
In-Plant Training :
- Sterlite Copper Industries Private Limited, Tuticorin.
Academic Project Details :
1.Project Name : Design and Fabrication of Angular Jig
Team Size : 4
Duration : Under 6th Semester Project Training
Role : Design and Fabrication
Programming Language : Auto-CAD, PRO-E
2.Project Name : Al –Sic Composite Using Powder Metallurgy Method
Team Size : 4
Duration : Under 8th Semester Project Training
Role : Design and Fabrication
Programming Language : Auto-CAD, PRO-E
Technical Skills :

Packages : Auto CAD, Pro-E

[Guest]

CURRICULLUM VITAE
SANDEEP KUMAR
sandeep205312 AT yahoo.com

Objective : To achieve higher designation in the field of Mechanical Engg. Under the guidance of superiors where my potential can be utilized for organization effectiveness.

Education Qualification :
Matriculation passed in year 1996 from CBSE Board

Technical Qualification :
Passed 3 years Diploma in Mech. Engg. In year 2000 from IME (India) Mumbai.

Other : ASNT LEVEL-II from sigma NDT institute (UT, RT, MPT, and DPT).

Computer skills : - MS Office.

Experience : 9+ yrs

As a mechanical engineer having 09 years of professional experience in the field of Fabrication & erection of Steel Structure, piping & Q.C, Auto parts manufacturing (machining) unit.

Working experience
1. Essar projects India ltd,
Presently working as a Mechanical manager (Fabrication) at IOCl refinery paradip site.
Job responsibilities
- Job & drawing allocation to contractor.
- Job allocation to engineers & supervisors.
- Preparing plan for monthly & weekly target.
- Monitoring process for site progress.
- Inspection of raw material.
- Preparation of process control plan.
- In process inspection (fit-up), final & assembly inspection.
- Co-ordination with Design and Quality Control department to improve quality.
- Co-ordination with other site Engineer for successfully Erection.
- Familiar with structural G.A. & civil drgs.
- Checking of weld visual with QMD people.
- To assist and co-ordinate with Civil & electrical department & the contractor supervisory staff to plan Co-ordinate and control work activities in accordance with approved drawing, Work method / instructions and specification requirement.
- Checking of Contractor’s running & final bill.

2. Simplex infrastructure Ltd.
A fastest growing company in the construction field. As a part of this company, I involve in the fabrication & erection of heavy structural steel for power plant & Refineries.
Period : 30th sep 2009 to 8th feb 2011.
Position held : Engineer (Construction)
Project : JSPL Angul site.
2. Reliance Engineering Associates Pvt. Limited Jamnagar (Guj.)
This Company is a Group of Reliance Industries Limited. RIL is world’s largest Grass Root Refinery, involved in production of Petroleum products. As a part of this project a huge quantity of heavy structural fabrication is involved.

Period : 28th dec 2006 to 31st August 2009.
Position held : Execution Engineer (Construction)
Project : Reliance Refinery Project.
*Worked with M/S Reliance engg associates pvt. Ltd, through Pratik enterprises from 11th march 2005 to 27th dec 2006 as an execution (Construction) engineer.
Job responsibilities
- Inspection of raw material.
- Preparation of process control plan in guidance of superior.
- In process inspection (fit-up), final & assembly inspection.
- Co-ordination with Design and Quality Control department to improve quality.
- Co-ordination with other site Engineer for successfully Erection.
- Familiar with structural G.A. & civil drgs.
Checking of weld visual.
Checking of Contractor’s running & final bill.
* Worked with M/S BHP engineers, Gurgaon from1st June 2004 to 28th Feb. 2005 as a QC Engineer. Manufacturer of crushing & screening equipment.
Job responsibilities
* Preparing PQP in the guidance of HOD.
* Inspection (physical) of raw materials.
* In Process inspection (fit-up of fabricated items & machining items), final inspection, & assembly.
* Inspection of bought out items i.e. bearings, motors, gears etc.
* Inspection at vendor’s end of machining components.
* Coordination with design, planning, production deptt. to improve quality.
* Inspection with clients & third party.
* Final testing & auditing of components i.e. jaw crusher, vibrating screen, feed hopper, bucket elevator etc.

*Worked with M/s Trinity die forgers Ltd., Gurgaon (HR) from 28th Aug 2001 to31st May 2004 as a Q.C.Inspector. Manufacturer of Front wheel hub of all vehicles i.e. Maruti, Tata, Hyundai etc. Main supplier of Maruti Udyog Ltd.

Job responsibilities
*Inspection of components (front wheel hub) with the help of gauges like Pcd, Spline, bore gauges, snap gauges, I/S & O/S micrometer, and plug gauges.
*Worked under power plants through contractor (M/s S.N.Singh) as a Maintenance supervisor from Dec2000 to June 2001.

Job responsibilities
Taking care of work going on turbine & its auxiliary’s maintenance i.e. pumps etc.
Training :
10weeks industrial training with BSEB from 15.05.2000 to31.07.2000.

Hands on experience & Achievements
Handling 3200MT of fabrication independently. Handling 05 contractors for IOCL paradip refinery project. Total experience more than 10 years in different field such as fabrication, Q.C. Operation & maintenance. Successfully erection of ETP Pipe rack & all sheds structure of chemical house. Any types of structure, piping & equipments, pipe supports & shuttering fabrication used in Refinery & crushing plant. Knowledge of using various measuring instruments such as vernier caliper, screw gauges micrometer (I/S &O/S), Bore dial gauge, and vernier ht.gauge, o/s &I/s caliper, hardness testing machine, & some fixed gauges like PCD, Spline, plug, snap gauges etc. Knowledge about maintenance of steam turbine & its auxiliaries. Major part in structure & equipment fabrication of CPP, Coker & FCC. Major part in manufacturing mega crushing& screening plant of 500TPH.

[Guest]

CURRICULUM VITAE
M.SRIDHAR
Email :seenu_pks AT yahoo.co.in
Email :seenupks AT gmail.com

Summary
1. 5.4 years ship sailing experience as Electrical Engineer in A.P Moller Singapore Pvt LTD.
2. 1.7 Years working experience as Technical Support Executive in Tata Telecom – Yercaud Electronics Pvt Ltd
1) A.P MOLLER SINGAPORE PTE LTD -
Designation : Electrical Engineer
Period : Nov 2006 - Till date
Responsibilities : Maintenance and Troubleshooting of
Electrical Machinery in Container Ship

Role
1. Maintenance and Troubleshooting of Refrigeration System
2. Maintenance of Generator, Main Switch Board, Starter panels as per
Planned Maintenance system
3 Testing of all Emergency Battery
4. Troubleshooting of Electrical Machinery, Automation and control system
5. Planning and preparing the stores and spares

2) TATA TELECOM –
Designation : Technical Support Executive
Period : Nov 2003 – Aug 2005
Responsibilities : Promoting EPABX Product (Telecom System)
to the client.
Role
1. Demonstrating the Technical Features of EPABX product
2. Installation and Inspection of EPAXB system in the site

TRAINING COMMISSIONED
- Undergone Marine Electrical Course in AMET, Chennai
Period : Five months, From Jan 2006 to May 2006
ACADEMIC CHRONICLE
- Bachelor of Engineering in Electrical and Electronics Engineering (BE)
Madha College of Engineering, Chennai, India.

[Guest]

my resume please find out any jobs to me

[Guest]

Is there any job opening for Boiler operator in Wartsila project at any state in India?

[Guest]

PRESENTLY I AM DOING MY FINAL YEAR MECHANICAL ENGINEERING(B.E)
CAN I APPLY FOR THIS JOB?