CavinKare Pvt Ltd Pondicherry : Quality Assurance Officer

[muthukalee]

Position : Quality Assurance Officer

Location : Chennai/Pondicherry

The Objective : The Objective of Cavinkare’s Recruitment is to have the Right Person at the Right Place and at the Right Time.

A management Career Path is not a straight line. Nor is it the same for everyone. Yet all management career paths have a starting point. All have milestones along the way. It takes a lot to build a Career. At CavinKare you get lots of opportunities to get to the top. What makes us different is that, you ‘enjoy working’ while you get there.

Responsibilities :
* The incumbent should be able to ensure that the food served at the restaurants meet Food Safety Standards at all times.
* Should be able to maintain hygienic conditions at the restaurants and kitchens.
* Should be able to deliver best service/experience to customers at all times.

Requirements :
* B.Sc or M.Sc Food Tech.
* 2-3 years in restaurant / flight kitchen / star hotels.
* He should have the knowledge of Food handling Equipments and systems.
* He should have the knowledge of personal and equipment hygiene.
* He should have the knowledge of auditing.
* Should be energetic and dynamic.
* Open to travel.

About us :
In 1983 with a single product, CavinKare started out as a small partnership firm. The Company that began its journey as Chik India Ltd was renamed as CavinKare Pvt. Ltd (CKPL) in 1998. With innovative Entrepreneur C.K. Ranganathan at the helm, CavinKare emerged into a successful business enterprise.

Contact us :
CavinKare Pvt. Ltd.
CavinVille,
No.12, Cenotaph Road,
Chennai - 600 018.
Phone : 044-24317550
Fax : 044-24362879
Post Your Resumes at: openings@cavinkare.com
http://www.cavinkare.com

[Guest-IJT]

Dear Sir/Madam,

I had done my B.Tech in Electronics & communication.I am working in Electrotherm India, Ltd. as a Application Engineer and handle sales and service of capital equipment(Induction Heating and hardening Equipment) in North Region from Aug. 2007 to till date and I have Knowledge of Erection and commissioning of PSU(Power supply unit) and PLC,Drive.
I am sending my resume regarding for position of Sr.Service Engineer.
if it match with your requirement than please give me the opportunity to work .

so please find herewith the attached of my update resume.


Current Location: Delhi


Thanks & Regards,
MOHIT YADAV
APPLICATION ENGINEER
Electrotherm India Ltd
Email Id:jec.mohit AT gmail.com
09310359946

Resume:-
PROFESSIONAL SYNOPSIS:-

An Engineer with over 2.11-yrs. of experience in on- site performance. Currently working with Electrotherm (I) Ltd. A proactive leader and planner with expertise in induction melting and heating, and market plan execution, with skills in targeted marketing, competitor and market analysis.


PROFESSIONAL QULIFICATION:-

Bachelor of engineering in Electronics & Communication (EC) branch from Rajasthan University (Jaipur) in the year 2007.

MANAGERIAL QULIFICATION:- .

Pursuing Part time Two year Corresponding Program in Post Graduate Diploma in Operation Management from SYMBIOSIS, PUNE(SCDL).


WORK EXPERIENCE:-

Current experience:-
Organization: - Electrotherm (India) Ltd.
An ISO 9001:2000 certified, public limited company, was founded in 1983 to caters to ferrous & non-ferrous Foundries, all segment of the steel industry & Heat treatment industry by designing, manufacturing & commissioning medium frequency induction melting-heating-hardening equipments. Pioneered in manufacturing Hybrid Electric Vehicle.

Designation : - Application Engineer
Duration : - Aug. 2007 to till date.
Present Location :- Delhi

Work responsibility:- SALES AND SERVICE OF CAPITAL EQUIPMENT

Technical undertaking :-

- Primary role of this position is to manage, co-ordinate and supervise AMC contracts and service engineer activities to ensure that objective of the company being achieved.
- Erection & commissioning of high frequency & medium frequency Thyristorized, IGBT, MOSFET based Induction Heating and Hardening equipments.
- Oversee performance of the electrical maintenance areas and develop action plans to assist with any necessary improvement. Implement new servicing system focusing on planning.
- Plan and distribute work to the individuals. Ensuring delivery of quality services to the clients for achieving a high customer satisfaction index and enhancing the brand credibility.
- Verify that the work is done according to plan and in conformance with the codes of conduct as per company policy .Routinely inspect/ monitor all equipment at site to insure proper running of machine on quarterly basis.
- Prepare reports (Daily, monthly, and Quarterly) to send it to head office.
- Initiating the implementation of “Standard Work Processor” by conducting seminar of our existing and non-existing customer.
- Analysis and problem solving in thyristorised 6/12/24-Pulse Converter bridge

converter /Inverter firing controls circuits, series & parallel resonant operation of the equipment. Setting efficient operative characteristics and production rate of the equipment, control parameters for start sequence and switching operation of thyristors. Arrangement for continuous monitoring of water flow and temperature level at various paths and interlocking of necessary protective system.
- Verification and approval of civil construction, foundation details beams and columns clearances. Verification of water flow circuits, underground and overhead water tanks , pipeline, water pump suction and delivery lines, valves, softening plant connection, cooling tower & heat exchanger installation and their efficiency.
- Layout of furnace transformer, HT/LT termination, Installation of relay panels and breakers.
- Co-ordination to R&D department on evolution and analysis of electrical performance and enhancement of the equipment.
- Involvement in newly developed and specialized equipment by R&D team.
- Ensuring delivery of quality services to the clients for achieving a high customer satisfaction index and enhancing the brand credibility.
- Planning & controlling the spare procurement.

NON Technical Undertaking :-

- Manage the sales & marketing operations for promoting products and for achieving business goals and increased sales growth.
- Conceptualize and implement sales promotional activities such as selection/ targeting the KOL'S (key opinion leaders in the field) as a part of market development and brand building efforts.
- Relationship building with corporate/ high worth clients for ensuring continued business from them.
- Ensuring delivery of quality services to the clients for achieving a high customer satisfaction index and enhancing the brand credibility.
- Planning & controlling the spare procurement.
- Various heating applications such as Billet heaters, Bar heaters, Long Bar End Heater ,Vertical Scanner ,Pipe Seam Annealers etc.
- Also various hardening applications like gear hardening, shaft hardening etc..
- Look after sales in North Regions. Enquiry generation, follow-up, negotiation, order confirmation etc.
- To generate inquiries as well as preparing offers as per the requirement of customer application. Also full follow up till the finalization of the order.
- Coordinating authority between the customer and departments like R&D, Production, Dispatch and Finance.

SOFTWARE KNOWN:-

- Operating Systems: Windows (98, 2000, XP, Vista)
- Programming Languages: C basics.
- DOS, Microsoft office, Internet surfing.


TRAINING :-

- 30 days training at BSNL., Jaipur. There I carefully noticed 3G Wireless Communication.
- 45 days training at Tisthtu Electronics Pvt. Ltd Jaipur. There I carefully noticed
Simulation Box.

PROJECT SUMMARY:-


TITLE DESCRIPTION

Burglar Alarms:- When anyone is enter in room that time burglar alarms is start.


Simulation Box:- It is a programming based model.

Automatic Gate Control(Minor Projects);- When anyone comes it automatically open the door & close.


Autonomous Irrigation System(Major Projects):-It is supply the water according to crops and all things are control by computer.




TECHNICAL SKILLS:-

Working in Electrical & Electronics Industries for more than two year I have possessed good command over Quality Control, production, Sales & Service with all aspects.

- Good Knowledge of Induction Heating & Melting Systems with all correlated systems.
- Working Knowledge of Power X’mer & H.T. Equipments.
- Basic Good Knowledge of Analog and Digital circuitry.
- Knowledge of PLC & Automation.
- Fundamental Knowledge of Drives.




EXTRA CURRICULAR ACTIVITIES :-

- Students Coordinator (Organization and Finance) for Juventus 2k6 – National Level Tech fest organized in the college and arranged sponsorship.
- Have participated and won many events in the inter college Tech fests like Paper Presentations, Model Presentations, Literary Events & Quizzes etc
- Have participated in district level Independence Day program.
- Played Cricket in college.
- Participation in college activity.


I hereby declare that all the above information is valid and correct up to best of my knowledge.


Date:…………………..

Place:…………………. Mohit Yadav

[Guest]

Vijaya Rani T.S.
Email : t.s.vijayarani AT gmail.com
CAREER OBJECTIVE :
Seeking a fulltime job opportunity which will enable me to utilize my academic skill and lab experience and enrich my knowledge to grow up in my career.
SUMMARY :
- Good knowledge in food science, food analysis, microbiology, food microbiology, food additives and other lab techniques.
- Have basic knowledge in Molecular biology and genetic engineering techniques.
- Adaptable, good communication and willing to work hard.
ACADEMIC DETAILS :
COURSE INSTITUTION EXAMINATION AUTHORITY MONTH & YEAR OF PASSING %OF MARKS
Msc Human Nutrition & Nutraceuticals Fatima College, Madurai Kamaraj University Madurai, Tamilnadu Autonomous May 2011 Upto 3 semester 79%
B.Sc.,(Zoology) Fatima College, Madurai Kamaraj University Madurai, Tamilnadu Autonomous May 2008 74.9%
H.S.C St.joesph’s girls Higher Secondary School, Madurai, State Board MAR 2005 68.25
S.S.L.C St.joesph’s girls Hr. Sec. School State Board MAR 2003 77.2
PROJECT AND INTERNSHIP :
- Completed a project on- “Formulation and Standarization of Carrot incorporated cookies”during my final semester project under the guidance of Dr.Sr.P.A.Mary, Assistant Professor, PG Department of Human Nutrition & Nutraceuticals, Fatima College, Madurai
- Undergone- a hands on training for 15 days at “Rumi Herbals Research And Development Centre” in Mugappair East during May 2011 under the guidance of Dr.AnoopAustin (Director/Principal Investigator).
I have had hands on experience on Validation and Nutritional evaluation of Herbal Food Supplements. I have learnt about each herbals have many beneficial effects and some fundamental tests to check the pH, Specific Gravity & Sugar content of Herbal drinks.
- Undergone- a Dietetic Internship at “Apollo Specialty Hospital Madurai ” during May 8th to June 8th 2010.
ACADEMICS :
HUMAN NUTRITION & NUTRACEUTICALS : Food & nutritional chemistry, Food processing and preservation, , Food additives, Food microbiology, Food fermentation, Clinical Nutrition and Dietetics, Functional Food & Nutraceuticals, Food Technology and Bio Technology, Analytical Instrumentation, Regulatory issues in food, Food safety& quality control.
ZOOLOGY : Genetics, Immunology & Biochemistry, Microbiology, Environmental & Molecular biology, Bio Technology.
POSTER PRESENTATION :
- Presented a Poster on “NONI FUNTIONAL FOOD” at Fatima college in the year 2010.
EXTRACURRICULAR ACTIVITIES
- Participated in the 41st National Conference of the Nutrition Society of India held at the National Institute of Nutrition, ICMR, Hyderabad.
- Participated in the State Level Seminar On “Shape And Shine”at Sourashtra College For Women. Madurai.
- Participated in the Various Concurrent Programmes Organized under N.S.S. And Completed satisfactorily two year of service during 2006-2007.

[Guest]

P.DEEPAKRAJAN
E.mail.id :deepakrajan2287 AT gmail.com

Career Objective
To secure placement as Quality Control Technologist in a well established pioneer enterprise with a global vision and crave to play an active role in the growth oriented environment that utilized my education and skill.
Academic Qualifications
DEGREE& INSTITUTION INSTITUTION YEAR PERCENTAGE
PG DIP IN DAIRY TECH ANNAMALAI UNIVERSITY. 2011 May. Waiting for results
B.tech (Bio-Technology ) SRM UNIVERSITY. 2009 May. CGPA :7.756/10
12th GOVT.HR.SEC.SCHOOL. 2005 Apr. 81%
10th GOVT.HR.SEC.SCHOOL. 2003 Apr. 85%
AREA OF INTEREST
- Food Processing and Preservation
- Microbiology
- Quality control
Personal strength
- Strong work ethics, service oriented and self motivated
- Positive attitude, enthusiastic and Hardworking.
- Good at organizational skills
Co-Curricular Activity
- In 2003 Awarded as a Young Achievers By Ullas Trust
Work Experience
- Working as a QC- CHEMIST AND MICROBIOLOGIST for 2 years in Oceanic Edibles International.ltd for frozen fruits and vegetables
Job Responsibilities
- Monitoring of raw materials for acceptance
- Handling of products all Tropical Fruit Dices and Halves (Mango, Papaya, Musk melon ,Pineapple, Pomegranate)
- Responsible for all operations of processing at different stages.
- Monitoring the day to day production process. 100 % checking of products.
- Responsible for Drafting HACCP plan. Co-coordinating all the activities related to HACCP plan preparation and implementation.
- Complete responsibility for sanitation, Hygienic condition in Production and Processing area.
- Responsible for customer/Buyer complaints, Suggest remedial measures.
- Ensuring the work of QC Technologist
- Review the performance with pre set standard.
- Preparation and maintenance of quality related documents
IN LAB
- Analyze PH, Brix, Acidity of fruits
- Analyze ingredients, product related samples for spoilage and pathogenic microorganisms (tpc, coli forms, salmonella, etc) to ensure product wholesomeness and fit for consumption.
- Manages laboratory supplies, instruments, and equipment to provide maximum, accurate, an safe throughput to meet data deadlines.
- Responsible for the calibration and setting of all equipment used for process control.
- Operates and maintains the laboratory quality control and safety polices and procedures.
TECHNICALSKILLS
- MS-office,
- WINDOWS 98/2000/XP

[Guest]

Respected Sir/Mam....
I am Ilamathy, from Puducherry....... i have finished my PG in Microbiology.. can i know the possibilities of me working in ur concern.. waiting for ur reply..
Thanking you..

[Guest]

CURRICULAM VITAE
S.THIRUPPATHI RAJ
Email id :thiruppathi95 AT gmail.com,


________________________________________
CAREER OBJECTIVE
To expose my skills and knowledge at a high – tech environment, this will enrich me as well as the concern...
EDUCATIONAL QUALIFICATION

Examination
Specialization School/College Board/University Year of passing %
B.E Computer science P.S.R Engineering college. Sivakasi Anna University
2011 73
D.C.E Diploma in Computer Science Airulmigu kalasalingam polytechnic college.
DOTE.
2007
63
SOFTWARE PROFICIENCY
Operating systems : Windows 98, XP, 2000, Vista, win7.
Languages : C, C++, Java
Database : MySQL
Scripting Languages : HTML
Packages : M.S.Office
Non-Technical : Problem solving, Team working, Adaptability.
CERTIFICATION
- “Computer Installation and Servicing”.
- “CCNA in ACCEL IT Academy”.
AREA OF INTEREST
- NETWORKING.
- SYSTEM ADMINISTRATION.
Project
Title : Image denoising using kernel base method (IEEE).
Description : In kernel methodology, the notion of the Reproducing Kernel Hilbert Space (RKHS) plays a crucial role. A RKHS, introduced in, is a rich construct , which has been proven to be a very powerful tool.
.
TECHNICAL PAPERPRESENTATION

- Stelth Technology.
- Multi sensor system for passenger safety in railway application.
NATIONAL INTELLECTUAL CONFERENCE
Title : A Reliable Transport Protocol Monitoring Mobility Aspect in Wireless Sensor Networks.
HOBBIES
- Surfing internet.
- Hearing music
- Playing volley ball.
STRENGTHS
- Quick Learner.
- Team Working Capabilities.
- Fast Grasping Skill.
DECLARATION
The above data given is perfect all the records available for verification and are honestly started as a resume.
Place : (Thiruppathi Raj.S)

[Guest]

CURRICULUM VITAE
R.SUNDARAMOORTHI
*sundarmpharm2009 AT gmail.com

Objective : Looking for a rewarding career in Pharmaceutical company, which offers both professional and personal growth, and to keep expectations of my employer alive through hard work and loyalty resulting in the achievements of both organizational goals and my personal goals , I would like to express a sincere interest in finding out more about becoming an integral part of your organization.
Academic profile :
Designation Institution Name Academic Year Aggregate Percentage
H.S.S St.Micheals Matriculation School -Gingee.
2002-2004
70.34%
B.Pharmacy Pallavan Pharmacy College/Kancheepuram.
2004-2008
63%
M.Pharmacy(Pharmaceutics) SRM University – Chennai. 2009-2011 70.44(GPA)

Experience :

Organisation Designation Duration
Surien Pharma Pvt. Ltd Chennai. production chemist
Sep 2008 - May 2009
Unilink Pharma Pvt .Ltd Chennai. Production chemist July 2010 – TILL NOW
PROJECT DETAILS :
B.Pharmacy FORMULATION AND EVALUATION OF ACECLOFENAC SUSTAINED RELEASE TABLETS
M.Pharmacy FORMULATION AND EVALUATION OF ACEBROPHYLLINE SUSTAINED RELEASE MATRIX TABLETS 200 MG
Training :
- Project Trainee : SURIEN PHARMA PVT LTD CHENNAI, JULY 2O1O TO APRIL 2011
- Industrial Training : IDPL NANDAMBAKAM CHENNAI,
- Hospital Training : MSD HOSPITAL KANCHIPURAM 1 MONTH MAY2007
EQUIPMENT KNOWLEDGE :
- 27 STATION COMPRESSION MACHINE(FLUID PACK)
- 16 STATION COMPRESSION MACHINE(CADMACH)
- STRIP PACKING MACHINE
- 35 STATION COMPRESSION MACHINE(CADMACH)
- RAPID MIXER GRANULATOR
- FLUDIZED BED DRIYER
- 48 TRAY DRIYER
- OCTOGONAL BLENDER
- MULTIMILL
- 1000 BLISTER PACKING MACHINE
- 240 BLISTER PACKING MACHINE
- SA9 CAPSULE FILLING MACHINE
- HAND FILLLING MACHINE
PROJECT DESCRIPTION (M.PHARM) :
Acebrophylline is an airway mucus regulator with anti-inflammatory action. The drug’s approach involves several points of attack in obstructive airway disease. The molecule contains ambroxol, which facilitates various steps in the biosynthesis of pulmonary surfactant, theophylline-7acetic acid whose carrier function raises blood levels of ambroxol,thus rapidly and intensely stimulating surfactant production. The resulting reduction in the viscosity and adhesivity of the mucus greatly improves ciliary clearance.
The objective of the present study is to design and evaluate Acebrophylline oral sustained release matrix tablets using polymers such as carboxyl methyl cellulose sodium, hydroxy propyl methyl cellulose K 100M& K15M, were formulated in different concentration. The sustained release tablets were prepared and evaluated for different parameters. Based on the Pre and post formulation parameters characteristics the best selected formulation were fitted to various kinetic models and short term stability studies were performed as per ICH guidelines
TABLETS SECTION
Granulation : Rapid mixer granulation&Ribbon Mixer, Cade Milling & Shifter & Blender, 48 Tray Driyer, Granulator & 120 KGFBD Processor.&6okgFBD
Compression : 27Stations – D Type Tools
27 Stations – B Type Tools
16 Stations – D Type Tools 35 Stations – B Type Tools (Model – CMB 3, CMB 4 & GMP)
Coating : Sugar Coating, Flimcoating & Entric , Coating (Conventional Coating & Fully Automatic coating) Pharmaphil-100 .
CAPSULE SECTION : Capsule Hand Filling, Loading, Semi Automatic
SECONDARY PACKING SECTION :
BLISTER-240 BLISTER1000
MAKE :PIGIPACK MAKE: ELMACH
CONCERN :CHEMIST INCHARGE CONCERN : CHEMIST INCHARGE
ONLINE PACKING ONLINE PACKING

DECLARATION
I hereby declare that all the details furnished above are true and correct to the best of my knowledge.

Yours Faithfully,
(R.SUNDARAMOORTHI)
PLACE : CHENNAI
DATE :

[Guest]

I am NANDA KUMAR.D from karaikal studying MBA in PONDICHERRY UNIVERSITY. I want to do summer project in your organization. Can you give a positive response please?