Foundry Sand Casting Pattern Design Engineer : Resume CV

[Guest-IJT]

RESUME :
SRINIVASA.G.A
Email : srini_splash05 AT yahoo.co.in

CAREER OBJECTIVE :
To be a part of a professional organization where I can use my skills and abilities for the growth of the company.

EDUCATIONAL QUALIFICATION :
2004-2008 B.E, Mechanical Engineering with aggregate 74.41% P.E.S.Institute of Technology, Bangalore.
2002-2004 P.U.C with 74.55% Vivekananda P U College, Bangalore.
2001-2002 S.S.L.C with 77.12% Sri Chithra Pinakini High School, Reddygollavarahalli, Chikkaballapura.

EXPERIENCE SUMMARY :
KM PATTERNS PUNE
Designation : Engineer.
Location : Pune.
Period : Currently Working from May-2010.
Working Profile : Design of complete Sand casting tools like pattern, core boxes, loose pieces ect. and coordinating in the shop floor to manufacture the tools up to dispatch.

Robert Bosch Engineering & Business solutions Ltd
Designation : Engineer.
Location : Bangalore.
Period : 6 Months.
Working profile :
1. Working for security system project to upload the component details in SAP and maintaining database for the same.
2. Working on creating Component Request Forms (CRF), Start of Web approval process for CRF,s
3. 3D-modelling in Pro-E for security system products.

Finished Graduate Apprentice Training in BOSCH India Ltd
Designation : Trainee.
Location : Bangalore.
Period : 1 Year
Working areas :
Trained in following areas :-
1. Production of Inline fuel injection pumps.
2. R&D for Inline fuel injection pumps.
3. Production of power tools.
4. Quality for components of inline fuel injection pumps.
5. Engineering Applications for Inline pumps & common rail pumps, like cold start trails, EGR(Exhaust gas recirculation) and SCR(Selective catalytic converter) testing.
6. Design of Fixtures.

PROJECT DETAILS :
- Involved in Design of fixture for Roller tappet assembly which is used for single cylinder fuel injection pump at Bosch.
- Involve in Design of fixture for leakage test between Delivery valves (DV) & DV pin which is used for fuel injection pump at Bosch.
- Investigation on rejection of pumps at Idling friction by using shainin technique.
- Involved in developing of pump to implement the rubber dampener concept to reduce the vibrations in pump by this increases the performance and decreases the emission.
Design Software’s : AutoCAD & AUTODESK INVENTOR & Pro-E & Basics of CATIA.Analysis Software : BASICS OF ANSYS.
- I worked as a student assistant for Prof. Dr Pradeep G Hegde in the year 2006.
- I was a NCC student in the year 2004 and I attended a camp in the same year.

PERSONAL INFORMATION :
Date of Birth : 15-03-1986.
Languages known : Kannada, English, Hindi and Telugu.

Strengths :
1. Motivated, focused and eager to learn new things.
2. Hard working, Enthusiastic about any tasks undertaken and good at team work.

Hobbies : Listening to music, playing games, reading technical books, Interested in solving challenges problems.

Declaration :
I hereby declare that the above written particulars are true to the best of my Knowledge and belief.

Date :
Place : Pune (SRINIVASA.G.A)

[Guest]

BALAMURUGAN S
E-mail ID : mett.bala AT gmail.com

OBJECTIVE :
To excel in the field of centrifugal casting as an Executive Engineer by committed continuously in the ductile iron pipe production for organizational growth
As well as my professional development to become a catapulter.

TECHNICAL SKILLS :
Non Destructive Level (N.D.T) - Two Certification
N.D.T Tests :-
1. X-ray radiography(XRT)
2. Magnetic particle inspection(MPT)
3. Die penetration tests (DPT)
4. Ultrasonic tests(UT)

WORK EXPERIENCE :
Executive Engineer, Jindal saw Limited, Mundra, Gujarat.India.
Since june2008 – at present
PROJECT DESCRIPTION :
Jindal Saw limited is the integrated pipe unit(IPU) committed continuously in the production of ductile iron Pipe which is used for the transportation of drinking waters, storage of oil gas, transportation of liquefied chemicals by using centrifugal casting technology
Tools Used :
1. Hoppers
2. Fall chutes
3. Runners
4. Mould
5. PLC Setting devices
6. Centrifugal casting machine
Major customers :-
Hpcl, Iocl, Gail, Nogl, Bpocl,
Roles and Responsibilities :
1. Rejection control :-
Rejection control is the huge problem in the piping industry. We are committed in all the five centrifugal casting machines to solve the casting rejections. Most occurring problem is pinholes. Some of the rejections are
- Pinholes
- Bad skin
- Cut mark
- Slag inclusions
- Drawn-body drawn, socket drawn, spigot drawn
Above mentioned problems are occurring while production .Have to solve both manually as well by using plc settings.
2. Making pipe of dia (80-350mm) :-
SDPP (small dia pipe plant) Making of DI Pipes in the range of 80mm-350mm
3. Mould Selection :-
Have to check the condition of the mould before sending it for production. The following things has to be checked out
- Surface preparation of the mould
- Bend checking by Gauge meter
- Whether there is any Crack in the mould
- Life of the mould
4. Man power Allotment :-
Man Power allotment has to be done with Respect to the Number of machines being run.
1. Metal distribution :-
Has to monitor the proper Metal Distribution for All Machines As Well as proper instruction has to be given for them about the metal consumption & Temperature checking of liquid metal to avoid the Rejections
2. Composition Analysis :-
Getting of composition Report from QA&QC for once in an hour to know about the composition level. Depends on the Fluctuation in the composition Adjustment has to done by the addition of alloying elements.
3. PLC Settings :-
CCM machine settings has to be done effectively with Respect to the problems .some of the main settings are
- RPM(Socket &spigot)
- Traverse time of the machine
- Hopper Lifting Time
4. as cast analysis :-
The thickness of both Socket and spigot has to get from the online inspectors to achieve the nominal thickness of the pipe for customer satisfaction

AREA OF INTEREST :
- Continuous Casting
- Centrifugal Casting

STRENGTHS :
- Team work
- Leadership quality

EDUCATIONAL QUALIFICATIONS :
Exam Institution Board / University Year Percentage :
B.E (Metallurgical Engineering) Govt College of Engineering, salem, Tamilnadu. Anna University 2004 - 2008 68.0%
HSC RCT Higher Secondary School, Chidambaram-608001, Tamilnadu State Board 2002 - 2004 83.91%
SSLC SAN Higher Secondary School, Chidambaram-608001, Tamilnadu State Board 2002 84.2%

[Guest]

Respected sir,

I'm lakshman from salem in tamilnadu state.

I ve completed BE METALLURGICAL ENGG in govt college of engg, salem.
I ve 81% sir. Pass out 2011.

Now i worked steel industries . . I could like change from tat filed to automobile or foundry filed. . So i would like join to any one automobile company sir. Will u help me sir.