Piping Design Engineer, PDS, MICROSTATION, SP3D, SPR : Resume CV

[Guest-IJT]

CURRICULUM VITAE:
SANJAY S. TOTAGI
E-mail : totagi_sanjay AT rediffmail.com, totagi_sanjay AT yahoo.co.in

Objective :
I had started my career as Site Engineer & then came into Design Field working as Piping Design Engineer.I have the ability to Design Petrochemical Plants taking into consideration Problems which are arising at site during Erection, Operation & Maintenance.

Experience : 7 years 2 months experience in the field of Hydrocarbons, Petrochemicals, Oil & Gas and Refinery working as Piping Design Engineer.

Qualification :
B.E. in Mechanical Engineering with 69.21%

Academics :
Institution Course University/Board Year Percentage :
KLESCET*, Belgaum B.E. VTU** July 2003 69.21%
RL Science Institute Belgaum P.U.C II Year Pre-University Education Board Karnataka April 1999 64.66%(Aggr) 78%(PCM)
Sherman Kannada Medium High School Belgaum S.S.L.C Karnataka Secondary Education Examination Board April 1997 65.44%
KLESCET K.L.E Society’s college of Engineering & Technology.
VTU Vishveswaraiah Technological University, Belgaum, Karnataka.

Technical skills :
Application software/s : PDS (VER.7.2 & 7.3), SMARTPLANT 3D(SP3D)
MICROSTATION, SPR, Navisworks, Interclash,
AUTOCAD14/2006, MS - Office etc.

ADDITIONAL QUALIFICATION :
DIPLOMA IN PIPING ENGINEERING.
I have done Diploma in Piping Engineering at
Suvidya Institute of Technology (SIT), Mumbai.

Code Studied :
ASME
IS
OISD

GS ENGINEERING & CONSTRUCTION INDIA PVT LTD.GURGAON
DESIGNATION : Piping Design Engineer
DURATION : Jan 2010-TILL DATE
PROJECTS HANDLED:
1)RUWAIS 4TH NGL
JOB PROFILE :
1).One Area is given for Developing Piping & Equipment layout in Treating Unit. Initially Equipment Location,Pipe routing studies will be done by using P & ID & then development of Piping Layouts & Equipment Layouts for Vessels, Tank farm, Columns, Pumps, Heat Exchangers, etc. by using P & ID,Equipment datasheet & material specifications.
2). Piping Modeling & Equipment Modeling in SP3D, once initial routing & initial equipment location has been fixed.
3).Developing Nozzle orientation & Ladders & Platform Drawing.
4).Checking vendor drawings of Pumps & Equipments as per P &ID, commenting on it if discrepancy is there .
5). Support of various lines in Piping by using Pipe Support Standard & also providing special supports or miscellaneous supports wherever necessary. Keep Updating once stress analysis has been done.
6). Squad Checking of Equipments, Civil foundations, Instrument hook ups etc.
7).Keep Updating Plot Plan if Equipment location,Structure,Platform has been Changed.
8).Providing Vessel Clip Information to mechanical & Pipe loading data to Civil/Structural Dept .
9).Checking Isometrics in all aspects before issue for construction, with respect to line list, P &ID, routing, support locations, operation & maintenance access & clash check.
10).Smart plant review of model on continuous basis for refining the piping layout.
11).Isometric Extraction & solving problems during Isometric extraction. 12).Co-coordinating with stress person for stress critical lines. .
13).Co-coordinating with team members & also with other departments especially with Process,CAS, Instrumentation,mechanical etc.

FLUOR DANIEL INDIA PVT. LTD.GURGAON(ISO 9001-2000)
FLUOR is a Fortune 500 Company.
DESIGNATION : Piping Design Engineer
DURATION : May 2007-Sep 2009
PROJECTS HANDLED:
1). NIZENKAMASK REFINERY & PETROCHEMICAL COMPLEX, RUSSIA 2). PORT ARTHUR REFINERY, TOTAL PETROCHEMICALS, USA 3). POLYSILICON, REC, USA
JOB PROFILE :
1). Pipe routing studies will be done by using P & ID & then development of Piping Layouts & Equipment Layouts
2)Piping Modeling & Equipment Modeling in PDS, once initial routing & initial equipment location has been fixed.
3).Developing nozzle orientation & Ladders & Platform Drawing.
4). Support of various lines in Piping by using Pipe Support Standard & also providing special supports wherever necessary.
5). Squad Checking of Equipments, civil foundations, Instrument hook ups etc.
6). Checking Isometrics in all aspects before issue for construction, with respect to line list, P &ID, routing, support locations, operation & maintenance access & clash check. .Smart plant review of PDS model on continuous basis for refining the piping layout.
7).Isometric Extraction & solving problems during Isometric extraction. 8).Co-ordinating with stress person for stress critical lines.
9). Resolving Clash reports & RDB conflicts.
10).Co-ordinating with team members & also with other departments.

L & T - CHIYODA LTD.
(ISO 9001-2000,EMS 14001-2004, OHSAS 18001-1999) MUMBAI.
It is a joint venture between Larsen & Toubro Ltd. India & Chiyoda Corporation, Japan.
DESIGNATION :Piping Design Engineer.
DURATION :June 2006 –May 2007.
PROJECTS HANDLED :
1). SFCCL, METHANOL & CARBON MONOXIDE, SAUDI ARABIA.
2). RGX6, LNG PLANT, QATAR.
3). IOCL, OHCU, INDIA.
JOB PROFILE :
- 1). Study routing & then development of Piping Layouts & Equipment Layouts for Tankfarm, Heat Exchangers, Reactors etc.
2).Hands on experience in Piping Modeling, Equipment Modeling & Microstation & SPR.
3). Pipe rack planning & sizing.
4). Developing Piping GAD & Plot plan.
5). Checking of Piping Isometrics & M.T.O w.r.t GAD & P & ID,line list etc..
6). Resolving RDB Reports, Isometric Problems, Interclash.
7). Consideration of Pipe Supports & Stress problems while doing study routing.
- ). Thorough Knowledge of material specification & datasheets, & using these in developing GAD.
9). Co-ordination with team members & working with quality control.

KIRPALANEY & ASSOCIATES (ENGGS.) PVT LTD. (KAPL)
(ISO 9001-2000), MUMBAI.
DESIGNATION :Piping Design Engineer.
DURATION :Dec 2004 - May 2006
PROJECTS HANDLED :
1). IRON OXIDE PLANT, DCW LIMITED, INDIA.
2). ALUMINIUM PLANT, HINDALCO INDUSTRIES LTD, INDIA.
JOB PROFILE :
1). Development of Piping Layouts & Equipment Layouts for
Heat Exchangers,Reactors,Columns etc.
2). Checking of Piping Isometrics & M.T.O w.r.t GAD & P & ID.
3). Knowledge of Pipe Supports & Stress Analysis.
4). Knowledge of material specification & datasheets & using these in developing GAD..

PRASHANTH PROJECTS LIMITED (ISO 9001-2000), MUMBAI.
DESIGNATION :Site Engineer/Piping Design Engineer
DURATION : August 2003 –Nov 2004.
PROJECTS HANDLED :
1). ESSAR REFINERY, JAMNAGAR, INDIA.
2). INDIAN OIL TERMINAL, RAMAGUNDAM, INDIA.
JOB PROFILE :
1). Development of Piping Layouts & Equipment Layouts for Tankfarm,
Heat Exchangers, filters , Columns etc.
2). Knowledge of material specification & datasheets & using these in developing GAD.
3). Execution work mainly fabrication, erection, alignment & fitting,
& Welding.
4). Planning the work and efficiently organizing the site (dyke) facilities
in order to meet an agreed programme of deadlines.
5). Hydrotesting, Radiography & Commissioning of Plants.
6). Sandblasting & Painting of pipes & equipments at Plants.
7). Working with quality control.
8). Liaising with clients and keeping them informed about the progress
Of day-to-day activities
9). Co-ordination with team members & working with quality control

EXTRA CURRICULAR ACTIVITIES :
1). Participated in various Cultural & Sports activities.
2). Was the student organizer for “INDEX” state level symposium.
3). Was the sub-editor of Association of Mechanical Engineers
- Magazine of my college.
4). Reading Newspapers, Listening to Music, Playing Cricket, Carom &
Chess, Watching Cricket & Movies.

PERSONAL DETAILS :
Date of Birth : 31st July 1981
Sex : Male
Marital Status : Single
Nationality : Indian
Languages Known : English, Hindi, Kannada(Mother Tongue) & Marathi.

Declaration :
I hereby declare that all the details furnished above are true and correct to the best of my knowledge & belief.

(Sanjay S. Totagi)

[Guest]

CURRICULUM VITAE :
A.SHANMUGA SUNDARAM.
E-Mail :- ashan19800217 AT gmail.com

Career Objective :
Looking for a challenging position in a dynamic & reputable organization, where I can utilize my experience & knowledge in the field of Power Sector as a Layout Engineer.

Technical Exposure :
I have 10 years of experience & sufficient knowledge in engineering department. I worked in structural, Pressure and non-pressure parts and layouts through Indian and American Standards.

Technical Qualification :
- B.Tech Mechanical Engineering in RVD University, in the year of 2010 scored First class.

Computer Knowledge :
- Design Oriented Packages Smartplant 3D, SolidWorks, Staad Pro,Tekla Structure, AutoCAD.
- Operating Systems Win XP ,Win Vista, Win 7,
Unix.
- Packages & Language Ms-Office. Foxpro, DTP.
Visual Basic.

Work Experience :
1. From September 2007 to till date
- Working in the Layouts Department to Generate Models using Smartplant 3D in Doosan Power Systems Pvt Ltd, Chetpet, Chennai-31..
2. From August 2006 to August 2007
- Worked as an Detail Engineer to generate the structural GA and detail Drawings in Alfa Electro chlorination Specialist LLC, United Arab Emirates.
3. From December 2004 to August 2006
- Worked in Structural and Pressure & Non-Pressure parts department in Enmas Engineering Pvt Ltd, Chennai.
4. From September 2003 to December 2004
- Worked in Design Department in Accurate Steel Forgings Ltd, Chennai.
5. From February 1999 to July 2003
- Worked in Design Department in Precision Engineering Works, Madurai.

Trainings :
1. From January 1997 to July 1997
- Worked as a Technician Apprentice in Arkay Rock Produce, Nagari.
2. From January 1996 to July 1996
- Worked as a Technician Apprentice in Vinayaga Auto Service, Madurai.
Responsibilities in Doosan Power Systems P Ltd
- Building the structural Model in Smartplant 3D.
- Building the Equipments in the Smartplant model.
- Building the pipe routing in smart plant Model.
- Building the Ducts layout in smart plant Model.
- Preparation of Duct Supporting Structures.
- Extracting the Layout of individual such as Gallery, Duct , Piping , Equipments etc.
- Issuing the extracted layouts for detailing works.
- Removing the clashes in the plant.
- Co-ordination with Detail Engineering Department for the clashes and rectifying.
- Layouts checking such as platform width, walk way, gallery access, headroom clearance etc.
- Checking of platforms for valve access and feasibility.

Projects :
1.Castle Peak 680 MW Boiler.
2. EDP Brazil 360 MW Power Boiler.
Responsibilities in Enmas Engineering :
- Foundation Plan & General Arrangement of Boiler supporting structure.
- Detail of Fabrication Drawings for Columns, Tie Beams & All types of Bracings.
- Arrangement & Detail of Ceiling structure.
- Detail of Staircase & Ladders.
- Detail of Platforms, Grating Arrangement and its Handrails.
- Detail of Economiser Coils.
- Detail of Steam Drum internals.

Project :
1. Goa Energy 30MW Waste Heat Recovery Boiler.
Responsibilities in Alfa Electro chlorination :
- Prepared Layout for the Structure & Prepared the detailed Drawing for the same.
- Prepared Layout for Equipments & Detailed.
- Details of Equipments prepared using Solid works.

[Guest]

my self sandeep kumar from Distt.Pathankot,I am doing diploma in mech. Stream in final year studend from Govt. Poly. College Batala