Avionics Design Engineer Trainee Bangalore : www.p3-group.com P3 India Consulting Pvt Ltd

[Admin]

P3 India Consulting Pvt Ltd Bangalore : Avionics Design Engineer Trainee
Company Name : P3 India Consulting Pvt Ltd
Company Location : Bangalore
Designation (of vacancy) : Design Engineer Trainee
Company E-mail ID : info.india@p3-group.com
Company Website : www.p3-group.com

Job Description, Candidate Profile, Company Profile, Company Address :
Role : Design Engineer (Trainee)

Unit : Technical Publication (ASM)

Eligibility Criteria :

AME (Avionics)

ABOUT US :
The P3 group has proven competence in the relatively new field of outsourcing engineering tasks and processes. We know about all difficulties and risks involved and therefore can be an asset for any company thinking about outsourcing major components of their engineering work to India or elsewhere.

P3 India was founded as the Indian part of the P3 group to support the very quickly growing number of off-shore engineering centers in India. The offered services range from the initial process and technical set-up to training, management and quality assurance.

Contact us :
P3 india Consulting Pvt Ltd
Envision Network Building (Ground Floor)
No . 119 1st Phase EPIP Industrial Aera,
White Field (Next to GE Bel)
Bangalore - 560 066

[Guest-IJT]

CURRICULUM VITAE
SRIDHAR-P E-mail : sri_diwa AT rediff.com
OBJECTIVES :
To be a part of an intellectually stimulating environment and contribute more than my best to meet the challenges faced by the organization.

SOFT SKILLS :
- Good analytical skills,
- Ability to solve the problems,
- Good communication skills.
EDUCATIONAL QUALIFICATIONS :
S.NO INSTITUE NAME DEGREE/EXAMINATION
YEAR OF PASSING PERCENTAGE
1 Ranippettai Engineering College BE May 2011 72%
Up to 6th sem
2 KAR polytechnic college DIPLOMA IN ECE April 2008 82%
3 Hindu Higher Secondary School SSLC April 2005 50%
INDUSTRIAL VISIT :
- Under gone industrial visit to “Radio Astronomy Research Centre” Ooty
- Kerala ISRO space research centre.
AREA OF INTERST :
- Embedded System
- Wireless Communication
B.E ACADEMIC PROJECT :
Project Title : “Implementation of Electronic Shopping Trolley Cart Transaction Using Wireless Embedded System“.
Project Description :
Embedded System is one of the most important term in the field of automation using this here we implemented those system in the shopping Trolley, the concept is to automate the billing system by the use if RFID and ZigBee here the both of them are used as a wireless medium, the function of the RFID is to identify the Products and list out them and given to the Embedded system and it control that given those information to the display and ZigBee. Using the ZigBee .we transfer’s that information to the Billing Section.

EXTRA CO-CURRICULAR ACTIVITIES :
- Participated in National Level Technical Symposium Conducted in Various College
- Participated in Workshop Conducted by IBM, etc.,
- Interest to Listening Music & Playing in Video Games, Cricket, Volley ball, Football
- Interested in handling the complicated projects.

[Guest]

ABID A
Email :abidrgaa AT gmail.com

OBJECTIVE
To achieve a commanding position in the organization, that will offer me the best growth and advancement opportunity as per my skill and knowledge, utilizing all my experience to contribute in the growth of the organization in every possible way.
PRACTICAL EXPERIENCE
Undergone familiarization with :
- Worked as a trainee technician in vikram aviation pvt.ltd
- Basic Electronics and Digital Principles
- Radio Communication and Navigational Equipments, Weather Radar Principles.
- Automated testing procedure of I.F.E system
- Knowledge on aircraft electricity, aircraft batteries, capacity test and charging.
- Avionics system including cabin and I.F.E covering servicing,modification,repair,replacements,test,operation and inspection of aircraft components or item of equipment during major checks
TECHNICAL QUALIFICATION
- AME (ES, IS & RN) Aircraft Maintenance Engineering, at Rajiv Gandhi Aviation Academy, Hyderabad (74.41%)
- Passed DGCA license Paper 1-CIVIL AVIATION REQUIREMENTS (79%)
- Passed DGCA license Paper 2-General engineering & maintenance practice (70%)
QUALIFICATION
Academic :10 +2 with Physics, Chemistry, mathematics.
STRENGTHS
- Good analytical ability and leadership.
- Good Communication Skills.
- Hardworking and challenging attitude.
- Positive minded and confident.
COMPUTER SKILLS
- Windows ,MS office ,MS exel,Power point,Internet & E-Mail

[Guest]

UDAY KIRAN NALLA
E-mail : udaykiran.nalla AT gmail.com

Objective : Seeking a challenging career where I can harness my abilities to the maximum and reach at the technical zenith of excellence and contribute myself in achieving the long-term goals of the Organization.
Summary
- Pursued Masters Degree from National Institute of Technology Warangal.
- Instant problem solving capability, good communication, interpersonal, analytical skills, good outstanding ability to quickly master the latest & upcoming technical transformation.
Academics
M.Tech (Information Security) – First class (7 CGPA) from National Institute of Technology, Warangal, 2010.
B.Tech (C.S.E) - First class (61.77%) from JNTU University, 2007.
Intermediate – First class (86.4%) from Board of Intermediate Education, A.P. 2003.
S.S.C – First class (77.66%) Board of Secondary School Education, A.P. 2001.
Skill Sets
- Languages : C,C++, Java, SQL.
- Web Technologies : HTML, XML.
- IDE : Eclipse.
- Database : Oracle.
- Operating System : Windows XP/2000, UNIX/Linux.
Achievements
- Got first prize in quiz competitions held at school & college level.
- Participated debate competitions held at school level.
- Got 97.07 percentile in GATE –exam.
Academic Project
Title : Enhancing Data Security in Adhoc Networks based on Multipath routing
Language Used : Java
Description : The main part of the project is to enhancing security (confidentiality, integrity, authenticity, non-repudiation and availability) to the Adhoc networks using Securing Data multipath routing protocol (SDMP). Adhoc network is a infrastructure less network, so there are multiple paths between systems. If we send data through single path it is easy to the eavesdropper to find out the data. Present Adhoc are using WEP Wi-Fi encryption protocol to secure the data. But there are some attacks which can break the WEP encrypted data, so we are using WPA2 protocol which is using AES-CCMP for encryption to secure the data in SDMP protocol. This can be implemented in home network or networks in big organizations.
Title : Digital Signature
Language Used : Java
Description: This project is mainly desired to transfer electronic message and documents with authenticity, integrity and non-repudiation using socket programming. The Internet is main medium through where the documents are transfer and electronic transactions are happening. There are so many eavesdroppers who maliciously modify the data or because of network problems data may be corrupted. Hence there is a need to create a trusted transaction between two parties (sender, receiver), so we have to use digital signature. This can be implemented on a small network or extended to network.

[charan22]

Suma CharanAdabala
Sumorocks AT gmail.com
_____________________________________________________________________________________
OBJECTIVE
To put into practical use the knowledge gained which would be useful for the upliftment of thyself and the organisation as well.
AREA OF INTEREST :
To do research in the area of Computational Fluid Dynamics
ACADEMIC QUALIFICATION :
- Bachelors in Technology-Aeronautical Engineering from NIMRA INSTITUTE OF SCIENCE AND TECHNOLOGY(JNTU Kakinada) in 2011.
- Intermediate from Board of Intermediate in 2004
PROJECT DETAILS :
Mini Project Title : Study of components of Gas Turbines
Company : Bharat Heavy Electricals Limited.
Project Description : Study of various components of Gas turbines and its components
A comprehensive study of the complex metabolic function of various components of
gas turbines .
Major Project Title : Conceptual Design of Unmanned Aerial Vehicles
Company : Central Institute of Tool Design
Project Description :Designing an Unmanned Aerial Vehicle which would perform extensive land and
structural observations.
A payload package consisting of LIDAR and an IR/Visual camera facilitates the
mission
Propulsion system is based on a 40 HP off the shelf rotary engines.
The average estimation gives a gross take off weight of 15000 pounds with an
endurance of 8000 nautical miles of the unmanned aerial vehicle.
TECHNICAL QUALIFICATIONS :
- Computers Literacy : C, Catia ,Ansys,
- Packages : MS Office, CAD
- Languages known : English, Hindi, Telugu

[Guest]

CURRICULUM VITAE
ANAMIKA KATOCH
E-mail : anamika.katoch94 AT gmail.com

OBJECTIVE :
To work in a challenging atmosphere and to seek responsible position utilizing my skills and experience, that will contribute to the development of the organization and enrich my professional skills.
PROFESSIONAL QUALIFICATION :
Completed three years Aircraft Maintenance Engineering course in Avionics stream approved by DGCA Govt. of India from Indian Institute of Aircraft Engineering Mahipalpur, New Delhi.
WORK EXPERIENCE :
- Presently working in BHARAT AVIATION PVT LTD as a Trainee Technician and technical support at Mumbai Base.
- Having 06 months experience as a trainee technician in Indian institute of aircraft engineering New Delhi maintaining AVIONICS SYSTEM of following aircrafts :-
- Hawker HS 125 -600A fitted with Rolls Royce Viper 601 -22 engine.
- Fokker F 27 fitted with Rolls Royce Dart Mk 514 -7 engine.
- Piper Comanche PA 24 -180 fitted with AVCO Lycoming 360 AIA engine.
- Cessna 152 11 fitted with AVCO Lycoming O -235 –L2C engine.
PROFILE :-
- Pre Flight, daily inspection etc. on Avionics System.
- Snag rectification, ground run up.
DGCA PAPERS :
- PAPER-2 (General Engineering) - Result awaited

ACADEMIC QUALIFICATION :
- Passed 10th standard in 2006 from CBSE board.
- Passed 10+2 standard in 2008 from CBSE board.
- Pursuing graduation in B.A (political science) hons. from Delhi University
PERSONAL STRENGTH :
- Willingness to learn and acquaint with new kind of work..
- Ability to work independently and in team environment.
- Self motivate and Goal oriented – defines clear and achievable short term goals and strive to achieve.
DECLARATION :
I hereby declare that the information provided above is true to the best of my knowledge and belief.
Date : Anamika Katoch

Place : Mumbai

[Guest]

CURRICULUM VITAE

BHAVIK M. JOSHI

E-MAIL ID- mr.bhavuk AT gmail.com
POSITION SOUGHT : TECHNICIAN (AVIONICS)
OBJECTIVE :
To build a career in leading Airlines & Companies dealing in avionics system of Aircraft, and do the work which is profitable for the organization and society too.

TECHNICAL QUALIFICATIONS :

- Completed 3 years Aircraft Maintenance Engineering course (AVIONICS), Duly approved by DGCA, Govt. of India Equivalent to ICAO Type – II Rating from NDC INSTITUTE OF AME , VADODARA , India. From (2008-2011)
- CLEARED PAPER-1(Aircraft Rules and Regulation) & PAPER-2(General Engineering) as per norms of the regulating authority DGCA.

MAINTENANCE EXPERIENCE :

Total Aviation experience 3 years 4 months.
- Two years and six months experience on LEAR JET – 24 and CESSNA -150 from NDC INSTITUTE OF AME , VADODARA , India.
- 6 months practical training on A310, B747-400, B777-200LR, B777-300ER in AIR INDIA MUMBAI BASE.
Working Experience :
During period of my job I have undertaken work like :
- Checks A, 4A and C :- B747-400, A310-300.
- Phase Checks :- B777-200LR, B777-300ER.
- Cabin and I.F.E. covering Servicing, Repair, Replacement, Test, Operation, Snag Rectification and Modification work.
- At present, I am working in Ahmedabad Aviation & Aeronautics Ltd as an Trainee Tech. and working on the below mentioned Air Craft and their respective engines :
AIRCRAFT ENGINE
CESSNA 152, 152 A LYC- O -235 – N2C
CESSNA 172 S, 172 R LYC- IO – 360 –L2A
CESSNA 206H LYC-TIO540AJ1A
.
EDUCATIONAL QUALIFICATION :
- Passed 10th from G.H.S.E.B. with 83.57%.
- Passed 12th from G.H.S.E.B. with 61.40%.
DECLARATION :
I hereby declare that all the details given above are true to the best of my knowledge and belief.
Place : bangaluru BHAVIK M. JOSHI

[Guest]

what is schedules and process of selection in p3 tech pub.

[Guest]

what is schedules and process of selection in p3 tech pub.

[Guest]

I have completed M.E Structural Engineering with adequate knowledge about Analysis and Design of RCC and Steel Structures by using software as well as manually.

[Guest]

I am gowsalya devi. I have completed AME AVIONICS. I am looking for technical author/ame job. If any vacancy in your company, kindly inform me.