SP3D/PDS/PDMS Piping Designer : Resume CV

[Guest]

CURRICULUM VITAE :
RAHUL YARWAR
EmailID :rahulyarwar AT gmail.com

Career Objective :
To build career in hi tech environment where I can use my knowledge
effectively for well growth of organization.

Brief summary :
Diploma in Mechanical Engg.,Persuing BE in Industrial Engg & P.G. Diploma in Piping technology having over 3 years
experience as “Piping Design Engineer” in Stone & Webstar Rolta Ltd, Andheri, Mumbai and total 9yrs of experience as Maintenance and service engineer in petrochemical and Automation machines .

Professional Experience : (Total Experience- 9Years)
STONE AND WEBSTAR ROLTA Limited, Mumbai, India. (On Deputation)
ROLTA India Limited, Mumbai, India (Employer).
Plant Design Automation Solutions & Services.
ROLTA India Limited is an ISO 9001-2000 certified provider of software, hardware, training and related services headquartered in Mumbai, India.

Details of experience are described below :
1) Project -EXXON MOBIL Singapore Olefin recovery Project
Client -EXXON MOBIL Singapore.
2) Project-HDPE-High Density Poly Ethylene plant.
Client – YANBU Petrochemical company
3) Project-SHARQ third expansion Ethylene project
Client-Eastern Petrochemical Company (SHARQ).
4) Project - Rabigh Development Project Polypropylene &Propylene oxide
Client – Sumitomo Chemical Engineering Co. Ltd. Japan.
5) LITWIN Phosphoric Acid Plant KSA.
6) Currentely Working On project as KNPC(Kuwait National Petrochemical Comapany)

Roles & Responsibility :
- Study of the Input Data from the Client.( P&ID, GAD, Equipment layout)
- Preparation of Isometric sketches for 3D modeling
- Preparation of Plot plan ,Line list , GAD, Manual MTO
- Knowledge of Codes and Standards( i.e ASME, ASTM, IBR)
- Line sizing and Pressure Drop calculations
- Development of area layout with help of Orthogen.
- Worked on various units like CDU , VDU ,SGU etc
- Vendor Drawing checking & updating with reference to Process Data Sheet (PDS).
- Equipment checking by using Mechanical Data Sheet (MDS)
- Squad checking of Equipments with respect to civil equipment foundation.
- Preparing support markup for stress critical and non critical lines and also coordinating
with support team for feasibility of support.
- Piperack piping, Utility piping, Vessel trim piping etc.
- Incorporation of tags Inter-discipline,Interoffice,Client (60% &90% model review)
- 3D Modeling of piping on Intergraph’s PDS-3D Version 7.3.
- Piping routing & Modeling with respect to P&ID.
- Supporting for Large bore (critical & noncritical) as well small bore
- Isometric correction & extraction for IFC.
- RDB & CLASH report check.
- Interference fouling errors,mistakes notes checking and highlighting.
- Re-issuing of isometrics by incorporating MTO, Process & Instrumentation comments.
- Interaction with other discipline (process, civil, instrument) for improvement of
layout as per client requirement and review comments.
- Interaction with clients to solve problem related to projects.
- Reviewing Modeling work of team on Smart plant Review Software to ensure
quality of work produced by team i.e. checking clashes and simultaneously taking
actions to solve the same.
- Updation of Markup P&ID's into Process Master

Software skills :
- Inter graph's PDS 3D modeling software version 7.2 ,7.3 as well as 8.0.
- Worked on various modules of PDS
SP3D ,SPPID.
Equipment Modeling , Piping Designer Isometric Drawing Manager , Pipe Support Designer Interference Manager, Drawing Manager
- Smart Plant Review version 6.1 for reviewing routing and checking clash
between Pipes , Equipments as well as Structure.
- Orthogen 7.4ver for GAD extraction.
- Formal training on PDMS , Intergraph”s SP3D Software

Educational & Qualification :
2008 :- Persuing BE in INDUSTRIAL ENGG.
2007 :- Piping PG diploma from mumbai
1999 : - Diploma in Mechanical Engg.
1996 : - S.S.C. from Maharashtra state Board.

Previous Experience :
- Celetronix design pvt ltd, (3.8 yrs)
Andheri seepz from 3rd may-2004 to 30th November2007 an MNC companey as a breakdown and preventive maint. engineer of smt m/c. and still working.Design & Development of New product mechanical parts, Jigs & Fixtures.Analyze process and equipment downtime and take corrective actions to minimize it.
- (2 years) of Diesel power engg pvt ltd Vasai(E)
as a maintenance engg. Maintenance of diesel engines of Cummins (I) Ltd make ranging from 125kva to 1000Kva.(2002-2004)
- (1 year)of experience in Amines & plastisizer ltd Turbhe (Thane)
as a maintenance engg handling the chemical process plant assesaries e.g reactors ,condensers ,cooling towers,boilers, reciprocating compresors ,chilled water plant,pump house, effluent treatment plant,chemical process pumps,different types of flanges etc (preventive maintenance of all above.).From 2001-to 2002

Personal Profile :
Date of Birth : 24-Oct-1980
Marital Status : Single.
Nationality : Indian.
Languages Proficiency : English, Marathi, Hindi

Date :
Place : Mumbai

[Guest]

K.HARIMOHAN
Email : harimohan_1981 AT yahoo.com

Executive Summary :
- Overall 6 years of extensive experience in detail engineering in Piping.
- Has the ability to do piping layout design which include pipe support design, MTO check, generation/checking of isometric drawings for fabrication.
- Currently working for Fichtner Consulting Engineer as Design Engineer
- Excellent knowledge in 2D & 3D Plant design software such as SP3D, Cadworx, AutoCAD.

Skill Set :
- Ability to develop piping layout/design which includes pipe support design, preparation of Tendering and Bulk Material Take off (MTO) from P&ID's and equipment layouts, MTO check, generation/checking of isometric drawings (isogen)for fabrication which are based on P & ID, Plot Plan, and other Information Drawings in accordance with piping standards & codes
- Ability to design and develop equipment layouts based on equipment GA drawings, plot plans and P&ID’s
- Proficient in the use of SP3D (Smart Plant 3D) Intergraph Software for 3D modelling of piping, equipment, operating stage, ladders, stairs & structures and for extraction of isometric/Piping Plan drawings
- Well-versed in the operation of AutoCAD software used in 2D applications
- Proficient in preparing isometric drawings with Bill of Material from Piping GADs
- Familiar with International codes and standards such as ASME and ASTM.
- Familiar with Smart Plant P&ID Software, Design Review/Smart Plant Viewer used in Model Review

Professional Experience :
Since June 2007 with Fichtner Consulting Engineer, Chennai as Design Engineer

Project Details :
- Title : AlQatrana Power Project , Jordan
- Client : Lotte Engineering & Construction
- Designation : Design Engineer
Job Role :
- Design and Development of GADs of Equipment and Equipment layouts.
- Design and development of piping layouts.
- Detail drawing of Piping Supports & Hangers.
- Preparation of Isometric Drawings with Bill of Material from Piping GADs
- Development of CADWORX 3D Model.
- Studying the required piping system for its optimized plant layout and pipe routing
- Modeling of support after getting inputs from stress engineer
- Routing (Modeling) of pipe using modeling software with high accuracy and precision using codes, standards and Engineering Design guides
Notable Highlights
- Adeptly developed the layout for Service Water System, Plant Air System (Instrument Air & Service Air System), Feed Water System, Boiler Blow Down System, Process Steam System, Waste Water System, Demineralized Water Makeup, Storage and Transfer System
- Drafted the layout for Instrument Air and Service Air System Header
- Effectively worked in Condensate Removal System : line routed between condenser and condensate vacuum pump to create vacuum within the condenser.
- Acquired experience in steel detailing which provides a wide knowledge about the structure (pipe rack or turbine & boiler building) within which or through which pipe is to be routed and supported.
- Gained exposure in AutoCAD for checking and preparing all types of fabrication or shop.

Project Details :
- Title : 300MW CCPP Kerawalpatiya Power project , Srilanka
- Client : Lakdhanavi Limited
- Designation : Design Engineer
Job Role :
- Preparation of Plot plan.
- Preparation of Equipment Layout.
- Preparation of Piping Drawings.
- Preparation of Support G.A.

Project Details :
- Title : Minjur Desalination Plant, Chennai
- Client : Befesa
- Designation : Design Engineer
Job Role :
- Preparation of Equipment Layout.
- Preparation of as-built Piping Layouts.
- Planning and Preparation of Construction Piping Layouts.
- Preparation of Support Layouts.
- Preparation of Isometrics.
- Preparation of Line list & Valve list.

APRIL 2006 to June 2007- Maruthi Engineering consultants, Chennai as Design Engineer :
Job Role :
- Preparation of Material Take off (MTO) from P& ID and layout.
- Documentation control of Piping and other disciplines.
- Review of P&ID's, Layouts, Isometrics & various piping related drawings and documents.
- Preparation of Line list & Valve list.

APRIL 2004 to June 2006- Diamond Engineering Pvt. Ltd, Chennai as Production Engineer :
Job Role :
- Fast reading of Equipment Drawings.
- Quality Checking of the Fabrication Products.
- Planning and maintaining as per the Schedule.

Software Skills :
Operating Systems Windows 98/2000/XP/vista/2007
Plant Design software Intergraph’s Smart Plant 3D (Version -9.1)
Cadworx Plant Professional
Other software AutoCAD, MS-Word, MS-Excel
Database Oracle 10g

Educational Qualifications :
B.E. (Mechanical) : Graduated from Dr. MGR Engineering College (Madras University), Maduravayal, in 2003
D.M.E : Graduated from Kumaran Polytechnic, Tiruvanamalai in April 2000
H.S.C : Obtained from Sri Gnanananda Matriculation Higher Secondary School in March 1998
S.S.C. : Obtained from Sri Gnanananda Matriculation Higher Secondary School in March 1996