Resume CV : Production Engineer

[Guest-IJT]

prod engg/prod engg/prod quality,pdms soft and piping engg

SHAMAN GUPTA
E-mail : shamangupta9 AT gmail.com

Professional Summary :
- Completed B.Tech in Mechanical engineering(2009) with 67% aggregate marks from Ambala College of Engineering & Applied Research , Mithapur affiliated to Kurukshetra University.
- Experienced user of windows98/2000/XP and various applications including MS Office & presentation software, the internet and E-mail.

Educational Background :
Completed Higher Secondary Certificate from CBSE Board with 67% aggregate marks in 2005.
Completed High School Leaving Certificate from ICSE Board with 67% aggregate marks in 2003.

Projects Undertaken :
Minor Project : "Design of Radiator Test Rig"
Major Project : "Design and Fabrication of Radiator Test Rig”
Members involved : 6
Description : In this project, we have to find out the efficiency of automobile radiator. We are using a container with heating rod as engine jacket. Container is connected to radiator with two parallel pipes, one connected to upper hose and other to lower hose. A centrifugal type pump is used to circulate the water. To measure discharge & pressure, water meter & pressure gauge is used. As we heat the water at 60ºc which then goes to radiator by pump, water heat rejects to atmosphere by radiator fan & then it again discharges to reservoir through pipe. At both the ends, we note down the temperature by temperature sensing probe. Hence we will calculate the - (overall) & also thermal efficiency.

Industrial Training :
1. Six Week Industrial Training (minor) at "JINDAL STEELS", Hisar.
2. Six Week Industrial Training (major) at ""UTTAR PRADESH STEELS", Muzaffarnagar.
3. Training on enhancing competitiveness through quality and customer satisfaction from govt recognised institute “chamber of industrial and commercial undertakings”.
4. Training was given every month on plant maintenance by “confederation of Indian industry”.

Job Experience :
Worked with Big-Ben Exports Ludhiana, Punjab (Largest manufacturer of saddles and pedals in India) from June 2009 to July 2010.

Job profile :
Preparing and implementing action plans effectively to maximize overall equipment efficiency of production machines.
- Distribution of work load to operators in order to achieve daily production target.
- Planning day to day production to achieve maximum production.
- Supervising hourly production.
- Utilization of manpower accurately.
- Organizing daily work at shop floor.
- Handling skilled manpower and administration of shop floor.
- Ensured proper housekeeping and coordinating with workers.
- Simultaneously working towards productivity and quality improvement through Kaizen activities.
- Record preparation of tool history coordinating with purchase, planning, stores, tool room.
- Responsible for suggestion and Kaizen activities.
- Removing useless work.
- Preserving discipline according to safety rules.
- Implementation of safety audits, 5'S.
- ERP user.
- Examine the needs for training and provide on the job training to departmental personnel.
- Preparing management information reports to ensure progress in the department.
- Fool proof System (POKA YOKE), 7-QC tools.

CERTIFICATION : CERTIFIED IN PDMS SOFTWARE AND DETAIL STUDY OF PIPING ENGINEERING FROM MIT PUNE.

EXTRA CURRICULAR ACTIVITIES :
1 Participated in athlete meet every year held in our college.
2 Participated in cricket competition held at Kurukshetra University, Kurukshetra.
3 Participated in Science Fest held at Ambala college of Engineering, Mithapur.
4 Article writing.

[Guest-IJT]

GIS ANALYST

RESUME :
D.VENKATESH
E-mail :venkatesh4064 AT gmail.com
MUMBAI

OBJECTIVE :
Intend to build a career with leading corporate of Hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.

EDUCATIONAL QUALIFICATIONS :
B.E in Mechanical Engineering from TAGORE ENGG COLLEGE, Chennai
April in 2005.
INTERMEDIATE (Maths, Physics, Chemistry) from Pradeepti Junior College Hyderabad, in 2001.
SSC from Sri Shantiniketan High school, Hyderabad in 1999.

PERSONAL PROFILE :
Name : D.VENKATESH
Date of birth : 01-07-1982
Fathers name : D.SEENAIAH
Sex : Male
Marital status : Married
Languages known : English, Telugu, Hindi
Nationality : Indian

WORK EXPERIENCE : 5 YEARS
PROJECT :1
Client : Bell South Telecom (BST).
Duration : 2.5 Years
Role : Conversion, QC ENGINEER.
Software : Micro Station & Oracle
NATURE OF WORK ::
This project envisages creating telecom network for U.S. The processes involved are geo-referencing There base by the client the date captured in wire centre wise. The final format delivered to the client is in DGN file format. The production processes involves in capturing the Trans media network according to the production processes involves in capturing the Trans media network according to the client specification from different types of sources. This project involves capturing telecom facility features such as devices air pressures cable, Poles, manhole, terminal and anchored connectors etc. assigning data base for required capturing elements as client specifications.

PROJECT :2
Client : Verizone,
Role : PRODUCTION & Q.C. ENGINEER
NATURE OF WORK ::
This project envisages creating telecom network for U.S. The processes involved are geo-referencing There base by the client the date captured in wire centre wise. The final format delivered to the client is in DGN file format. The production processes involves in capturing the Trans media network according to the production processes involves in capturing the Trans media network according to the client specification from different types of sources. This project involves capturing telecom facility features and Fiber network such as Fiber cable, Spans, Structures, Splice Closer, etc. assigning data base for required capturing elements as client specifications.

PROJECT :3
Worked in GENESYS INTERNATIONAL CORPORATION , LTD, MUMBAI. As a Executive-2 Since 1.5 Years For Navigational Projects.
Duration : 1.5Year,
Client : NAVTEQ,
Role : PRODUCTION & Q.C. ENGINEER

PROJECT :4
Presently working in NAVTEQ, Mumbai as a 'Geographic Technician', Since 1 Year for Navigational Projects.

DECLARATION :
I hereby that declare that the information furnished above is true to the best of my knowledge.

Date :17.11.2010
Place : HYDERABAD D.VENKATESH

[Guest-IJT]

production engineer

RESUME
VINOD SHARMA
Email : binni2vinod AT yahoo.com DELHI-110053

Job Objective :
To achieve the position of responsibility in the industry where I can utilize my technical skills, potential to evolve consistently with the organization.

Work Experience :
- Presently working as a Production Engineer(Weld Shop,Press shop) in ENCO ENGINEERS COMBINE PVT LTD GURGAON since 1st june2009 to till date..

Company Profile :
The ENCO ENGINEERS COMBINE PVT LTD is an ISO 9001-14000 certified company and is engaged in manufacturing of Auto Parts of sheet metal components such as Back Plate, Arm Rear Trailing, Parking lever & Suspension system for M/s Maruti Udyog Ltd, Bosch Ltd, H-one Ltd.
Job Profile :
- Handling manpower and proper utilization of manpower.
- Deployment of manpower as per requirement.
- Achievement of Target as per Plan with desired quality.
- Online Process Inspection.
- Knowledge of POKA YOKE , KAIZEN.
- Exposure to MIG Welding, Spot Welding, Projection Welding.
- Focusing on Customer satisfaction by reducing % rework.
- Controlling consumable cost, rework and rejection cost per unit.
- Productivity improvement.
- Training & educating workmen for creating Awareness for Quality /Productivity & Good house keeping.
- Controlling Consumable item cost.
- .Maintain the 5 S in the plant.
- Co-Ordination with workers and team.

Professional Qualification :-
- B.Tech. in Mechanical Engineering with aggregate percentage 64.00% from BUNDELKHAND UNIVERSITY JHANSI (U.P) in Year 2009.

Academic Qualification :
- 12th with 66.7% from U.P. Board in Year 2005.
- 10th with 56.6% from U.P. Board in Year 2003.

Project :
- “Major Project on “REGENERATIVE BRAKING SYSTEM”.
- Project on Hand Injection Mould for Coaster Plate from Indo Danish Tool Room JAMSHEDPUR.

Training :
- One month training at National Thermel Power Corporation BADARPUR STATION DELHI.
- Exposure of 4 week course of AUTO – CAD 2005.
- Exposure of 4 week course of CATIA V5 R17 from Indo Danish Tool Room JAMSHEDPUR.

Field of interest :
- Any mechanical industry where I can utilize my potentials with my skills to achieve the task which is assigned.
- Reserch and developement (department) using my designing ideas and any field where I can implement my innovative and sincere work.

Computer Proficiency :
Computer Skills : - Window 2000/XP/ Basic knowledge of computer.
Software Package : - AUTO-CAD-2005 , CATIA V5 R17

Strength :
- Self motivated & motivator.
- Positive & Analytical thinker.
- Team work temperament.

Extra curricular and Hobbies :
- Winner of a G.K. competition at district level.
- My hobbies are guessing the vehicles model on road , watching movies ,internet surfing ,reading novels.

Personal Details :
Sex : - Male
Marital Status : - Single
Date of Birth : - 01/03/1989
Email : - binni2vinod AT yahoo.com
Language Known : - English, Hindi

Declaration :- I do hereby declare that all the statement made by me are true to the best of my knowledge and belief. I also understand that my discrepancy found in above information will render me liable for candidature of your esteemed organization.

Date :- (VINOD KUMAR)
Place : -