www.cpgindia.com CPG Consultants India Pvt Ltd Bangalore : Mechanical, Electrical Engineer

[muthukalee]

cpgindia.com
CPG India constantly looks for dynamic professionals to be part of our growing team in the area of

Architecture

Civil & Structural Engineering

Mechanical & Electrical Engineering

Quantity Surveying

Landscape Architecture

The Company provides best opportunities to develop his or her fullest potential and to build a rewarding career.

To join our dynamic team, simply write in, e-mail or fax your detailed résumé, stating the position applied for to following address

About us :
CPG Consultants, headquartered in Singapore, has ventured into potential markets in the Asia-Pacific region and is represented in India by its wholly owned subsidiary, CPG Consultants India Pvt Ltd, which was incorporated in June 2002. CPG India has built up a strong reputation and brand status in India through its professionalism & Creative concepts.

Contact us :
CPG Consultants India Pvt Ltd
21/31 Prestige Craig House
Craig Park Layout, M G Road
Bangalore 560001, India
Email : hrcpgi@cpgcorp.com.sg
http://www.cpgindia.com

[Guest-IJT]

RESUME :
RAHMATHUNNISA M
email :rahi30384 AT hotmail.com

Objective :
To work in a professional organization where my educational background as a Structural Engineer can enable me to make a positive contribution to the organization.

Education :
M.Tech Structural Engineering,(Till III semester) (2009) from National Institute of Technology, Trichy with CGPA 9.17
B.Tech in Civil Engineering , (2006) from College of Engineering,TrivandrumUniversity of Kerala with 76.33%
Pre-Degree Course-(XIIth), (2001) from All Saints College, TrivandrumUniversity of Kerala with 78.6%
SSLC-(Xth), (1999) from Govt. V&HSS for Girls ManacaudGovernment of Kerala with 88.67%

Project Work/ Training :
PG Thesis Title : “A study on Behavior of Semi rigid Road safety barrier under Indian load conditions”
Abstract : This thesis deals with the non linear behavior of semi – rigid road safety barriers. A typical 3D finite element (FE) model is developed in ANSYS 11.0 to study the behavior of such barriers with varying geometry but same cross sectional area to study the failure pattern of the semi rigid road safety barrier in general and the damper in particular.

UG Project Title : “Design of a bridge across the Puthiyapuzha River”
Abstract : Aim of this work was to come up with a suitable alignment and design of a bridge across the Puthiyapuzha River in Kannur, Kerala. The structural design and detailing of the substructure and the foundation was done as per the relevant codes. The Deck was chosen from the MOST diagrams.

Seminar Report Title : “Magneto Rheological Fluid in Seismic Dampers”
Abstract : The seminar gave a brief introduction of the properties and applications of magneto rheological fluid in seismic dampers.

Participated in the International Workshop on Infrastructural Engineering under TEQIP organized by Dept of CE, NIT, Trichy.

Participated in the Two day workshop on Advances in Steel Structural Design and Applications under TEQIP organized by Dept of CE,NIT,Trichy.

Participated in the One day workshop on Geotechnical investigation and Decision Making in Foundations under TEQIP organized by Dept of CE,NIT,Trichy.

Areas of Interest :
- Finite Element Analysis
- Steel Structures.
- Reinforced Concrete Structures.

Software Skills :
- ANSYS 11.0.
- StaadPro.
- AutoCAD2006.
- Microsoft office.

Academic Achievements :
- Secured 3rd place in M Tech Structural Engineering in NIT, Trichy.
- Ranked within the Top 5% of people who qualified in GATE 2007.
- Secured school 2nd in Xth.

Work experience :
- Company : East Coast Constructions & Industries Limited, Chennai Egmore
Experience : 8 months as Graduate Engineer Trainee from Nov 2007-June 2009.
Job Profile : Collecting details about incoming Tenders, Preparing PQ documents, negotiating& collecting rate from Sub contractors, Rate Analysis of Building Tenders.

Extracurricular Activities :
- Participated and Won Third Price in Technical Quiz and participated in other technical events in SHRISHTI-2006-A south India level Intercollegiate Technical fest conducted by Department of CE,College of Engineering Trivandrum.
- Actively volunteered in the organizing of SHRISHTI 2006.
- Participated in Building Design and Drawing Competition in DHRISHTI 2004-An Intra College Technical Fest in College of Engineering Trivandrum.

RAHMATHUNNISA M

[Guest]

CURRICULUM VITAE
PRAVEEN KASHYAP N
Email :npkashyap71 AT gmail.com

Objective : To obtain challenging Technical position, for using my problem solving, analytical, leadership and communicational skills and to achieve the professional excellence.

Academic Profile : Degree: Completed the course of Bachelor of Engineering in the stream of Mechanical Engineering in July2009 from Sri Siddhartha Institute of Technology Tumkur, affiliated to Vishveswaraiah Technological University.
Academic Records : Degree:
Year Semester
Semester %of Marks Semester %of Marks
2006-07 III 60 IV 52.55
2007-08 V 61.77 VI 64.11
2008-09 VII 68.33 VIII 80.96
Aggregate % of marks ::64.62

Pre-Degree :
Examination Passed Board Institution
Studied Year Of Passing % of Marks
Diploma in Mechanical Engg Board of Technical Education Arya Bharathi Polytechnic, Tumkur 2006 65.66
SSLC KSSEEB Govt High School, Hullenahalli tumkur 2002 58.4

Software Exposure :
- Ms-office
- Ms-Excel
- Ms-Power point.
- AUTOCAD
- CATIA

Academic Project : Study on Bio-Degradability of Polymer Composites and its Effects on Environmental Pollution control.(Approved by KSCST)

Brief Description The use of plastics in building applications and as outdoor furniture, fishing gear, marine crafts etc. is popular in the developing world as well because of the low cost and the ease of use of plastic components compared to the conventional materials.
If fiber/plastic composites are used outdoors, they will be exposed to ultraviolet radiation, moisture from rain, snow and humidity, freezing and thawing and fungal attacks causing their BIODEGRADATION.
The motto of this project is to analyze the rate of degradation of polymers reinforced with bio-fibers.

Work Experience :
Working as a Asst. Engineer – DESIGN & DEVELOPMENT in SUPRAJIT ENGINEERING LTD, from JULY 2010.

Company Profile :
Suprajit Engg. Ltd. is an ISO/TS-16949-02 quality management certified company with turn over of 190 chores in the previous financial year. Suprajit is the world class leaders in manufacturing of Automotive cables, control cables and Speedometers and SEL is the single source supplier to the TVS motor company and supplying to all other major 2 wheeler OEM’s like BAJAJ, HEROHONDA, HONDA MOTORS, LML, KINETIC ENGG. and YAMAHA.
SEL is tier two suppliers of window regulator cables to all four wheeler giants like FORD, HYUNDAI, GM, FIAT, MARUTI & TELCO through IFB.

Present Job nature :
- Preparation of PPAP documents.
- Preparation of cable drawings as per the customer requirements.
- Preparations of process & final inspection quality plan.
- Checking the developed cable along with the production and quality Peoples.
- Coordinating with the production peoples in all situations.

Key Skills area :
- Very strong in preparing AutoCAD drawings.
- Know 2D & 3D drawings.
- Know “CATIA”.
- Strong in communication skills.

External training taken :
- P.P.A.P.
- F.M.E.A.
- S.P.C.

[Guest]

CURRICULUM VITAE
SURYAPRAKASH J
Email : suryaj12111989 AT gmail.com

About Myself :
An active, quick learning, creative and highly motivated person with excellent interpersonal skills
Objective :
Intend to build my career with a leading corporate, commitment and dedicated people, which will help me to explore myself fully and realize my potential. I am wishing to work as a key player in challenging and creative environment.
Education :
- B.E in production engineering from J.J.College of Engineering and Technology, Anna University Tiruchirapalli with aggregate of 70%.

- HSC Passed in First class, 70.50% from Sri Vidya Mandir Matriculation Higher Secondary School, Rasipuram in March 2007
- SSLC Passed in First class, 73.81% from Sri Vidya Mandir Matriculation Higher Secondary School, Rasipuram in March 2005
Area of Interest :
- Quality control
- Designing
- Manufacturing
- Value stream mapping
Software skills
- CATIA V5R16, Pro-E, AutoCAD 2006
Projects :
Mini project :
Title : Design and fabrication of Bending Machine (Manually Operated)
Bending is a metal forming process used to permanently form pipes or tubing into the shape of die. Generally round stock is used for tube bending. One side effect of bending is the wall thickness changes. To overcome this, tube may be supported internally or externally. Often, stock tubing is held firmly in place while the other end is rotated and rolled around the die. Other forms including pushing stock through rollers that bend in to the simple curve or some tube bending processing, a mandrel is placed inside to prevent collapsing.
Main project :
Title : Lead Time Analysis and Waste Reduction using VSM
Company : Brakes India Limited (TVS Group), Chennai.
Value Stream Mapping (VSM) has become latest craze in manufacturing improvement. Without a good understanding of lean manufacturing principles, it will bring organizations no closer to minimizing wastes and achieving excellence than Kaizen did in early to mid nineties. This project mainly focuses on analyzing the no value added activities and parts & information flow, thereby eliminating the waste to improve the productivity along with reducing lead-time.
Paper Presented :
Title : Design and finite element analysis of piston cooling nozzle by Hypermesh
College : K. K. Wagh College of Engineering and Technology, Nasik.
Automobile industries have shown a great interest in replacing metal to plastic parts, in order to reduce the cost & weight of the components. This can be achieved mostly be replacing metal component with plastic injection moulded components. This paper deals with one such case study of metal to plastic conversion of the automobile component piston cooling nozzle. In this paper finite element analysis of the component is carried out to find the stress and displacement of the final product. For modelling of the component PRO-E software is used. Pre processing work like meshing and analysis work is carried out in HYPERWORKS software.
Industrial Visits :
- Shanthi Gears, Coimbatore
- TANSI, Chennai
- Brakes India limited, Chennai
Other Accolades :
- Event coordinator in PROPHESY 2K10 and PROPHESY 2K11 (SYMPOSIUM).
- Volunteered in NSS.
- Active member of Rotary Club in school.
Hobbies :
- Playing cricket
- Listening to music

[Guest]

Curriculum Vitae
Tulika Kapoor
E-mail : tulika.gpt21 AT gmail.com
Objective :
Mechanical Engineer with 3.7 year exp. as an R & D engineer in design and development. Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key Player in challenging & creative environment.
Work Experience :
Organization : M/s Applied Electro-Magnetics (P) Ltd.
(Dec 2007- till date)
Company Profile : AEM is an ISO-9001, 2000 Certified Company having turnover of 80 carores. It is one of the Government approved company. Some of the respective clients are RAILWAY, AIRFORCE, C.E.L, TATA, BEL . It is an organization for carrying out indigenous Research & Development activities. More details are available at www.aemindia.com
Designation : Design Engineer (R & D Mechanical)
Job Profile :-
- Make the sketch for concept.
- Design Solid modeling for sheet metal, plastic and Aluminum Enclosures.
- Developing 3D models for plastic parts using Ideas NX-12.
- Assembly of plastic parts using Ideas NX-12.
- 2D drafting on Ideas NX-12.
- Final checking and release of engineering drawings for development process.
- Preparing drawings as per clients' specification.
- Prototypes build and sample testing.
- Reports preparation and corrective action.
- Product monitoring.
- Documentation for project release.
- Project Planning.
- Also working for IAF on VCCS System.

Job Responsibilities : -

- Presently working on the Development of G-Locator, RTU, Belt Printer & RIU etc.
- Design the components according to P.C.B function, fitment in layout using the Ideas NX-12 & AutoCAD.
- Design the different sizes of boxes in F.R.P.
- Design the small & large Enclosure of sheet metal and case systems.
- Design in Personal Computer Enclosures, Tele communications & Billing machines.
- Preparation of Bill of material.
- Co- ordinate with vendors related to drawings; sort out the queries subject to drawings.
- Corresponding with client through mails for approval of developed drawing.
- Coordinating the entire product development including requirement analysis, finalizing specifications, designing and prototype development.
- Working as a Team Lead of 5 Team members.
Reporting To : Sr. GM (Mechanical)

Academic Background :
Examination Institution Year of Passing
B.Tech- Mechanical
Faculty of Engineering & Technology
Agra 2007
Intermediate
(UP Board) B.D. Jain Girls Inter College
Agra 2003
High School
UP Board) B.D. Jain Girls Inter College
Agra 2001
Other Qualifications :
Diploma in Mechanical CADD from CADD Centre for 6 months and learnt following softwares : -
1. Auto CADD- 2006
a) Drafting
2. Pro-E wildfire 2.0
a) Sketcher
3. Ideas NX-12
a) Master Modeler
b) Master Assembly
c) Master Drafting
4. Pursuing M.BA in Operation Management from Symbiosis, Pune.
Computer Literacy :
1. Proficiency in using Windows 98 and Windows XP.
Summer Training :
Organization
LML, Kanpur
Project Title
Study of Motorcycle Engine
Hobbies :
1 Cooking
2 Listening music
Personal Skills :
Self-motivated, quick learner and a team player who is willing to learn and adapt to new challenges of design & development.

[Guest]

CURRICULUM VITAE
MUKUND.P.MALADKAR
e-mail :mukund652 AT gmail.com

OBJECTIVE :
To grow professionally by learning from the organization and giving my best.

EDUCATION :
Course Institution University/Board Year of passing Percentage
S.S.L.C S.J.G.H.S Hubli Karanataka Secondary Education Board 2003 69.48%
P.U.C P.C.Jabin Science college Hubli Department of Pre-University Education 2005 50.14%
B.E (Automobile) Rural Engg College, Hulkoti Visveswaraya Technological University 2010 59.00%

SOFTWARE KNOWN :
Solid edge v 19
Catia v5
Auto CAD

PROGRAMMING LANGUAGES :
1.Overview of C programming
2.MS-Office

FINAL YEAR PROJECT :
“ALTERNATE FUELS FOR CI ENGINES”
We used zatropa oil as an alternative fuel by blending with diesel which gives good performance. by this we can reduce dependency of foreign oils becouse we largely dependent on those oils. By using these oils with blending we can increse engine life and can decrese environment pollution sulphur up to 100%
Different blends : D/Z, 50-50,60-40,70-30,80-20

EXTRA CURRICULAR ACTIVITIES :
1.Participated in singing events and inter college competitions.
2.Participated in Inter-school competitions.

STRENGTHS :
1.Good inter-personal skills.
2.Logical thinking.

[Guest]

RESUME
G. KAVITHA
Email : kavitha.g43 AT gmail.com

1. OBJECTIVE :
To obtain a challenging position in a firm that would give me an opportunity to prove my skills and technical ability and in turn help me to build my career to the best it can reach.

2. Educational details :
Course :Mechanical engineering
Institute :South East Asian Of Engineering & Technology, Bangalore
Year of passing :2008
Percentage :76.88%
PUC :
M.S.Ramaiah Composite PU College, Bangalore
with 53%
SSLC :Maxwell Public School, Bangalore
2006 with
72.16%
3. Technical skills : a) Solid edge
b) Ansys
c) CAED
4. Project undertaken : Planning to do on GENERATION OF POWER IN HUMP
5. Activities & achievements : a) Athletics
b) I was class topper in my 3rd sem with 76.77%
& in 4th sem with 76.66% & right now in 6th sem I am the collige topper with 84.88%
6. Strength : a) Hard working
b) Fast learning
c) Convincing ability
7.Languages known : a) Kannada and
b) English
8. Hobbies : Dancing and singing.

[Guest]

CURRICULUM VITAE
PRAVEEN KUMAR S K
E-mail : praveensadla AT gmail.com
OBJECTIVE
To obtain a challenging position as a Mechanical Design Engineer where my skills and professional experience will be utilized towards professional growth and development.
CAREER
Career Level : Experienced.
Relevant Work Experience : 4 Years.
PROFESSIONAL EXPERIENCE
- 2 Years of work experience as a Design Engineer at GCL India Pvt Ltd, Peenya.
Designation : Design Engineer.
Company : GCL India Pvt Ltd, Peenya.
Duration : From June-2010 – Till Date.
Products : Cheese Winder, Tape plant, Knitting Machine.
Job Responsibilities :
- Creating assembly drawings , fabrication using SOLID WORKS and creating bill of material for new design.
- Performing related tasks assigned by managers and technical personnel.
- Preparing projects from 3D modeling to final drawing for shop fabrication using Solid works.
- Performing all necessary drawing conversions required by customer such as pdf files, tiff, jpeg and dwg/dxf file.
- Drafting and detailing all drawings for tender, fabrication, assembly and erection/installation.
- Checking and finalizing all drawings for issuance.
- Revising, tracked and reviewing new and existing drawings and organizing technical documents.
- 1 Year of work experience as a Design Engineer at Kripa Telecom Pvt Ltd, Bangalore.
Designation : Design Engineer.
Company : Kripa Telecom Pvt Ltd, Bangalore.
Duration : 1 Year.
Products : RF Loads, Combiners, Antennas,,,,
Job Responsibilities :
- 3D modeling and drafting of various components such as rf loads, combiners, filters, patch panel antennas,,,,,, etc and designing the products as per the customer requirement.
- 1 Year of work experience as a Designer/Production Engineer at M/s Culture Instruments, Peenya, Bangalore.
Designation : Design Engineer.
Company : M/s Culture Instruments, Peenya, Bangalore.
Duration : 1 Year.
Products : Hot Air Ovens, Incubators, Impact Testers,
Water Baths....etc
Job Responsibilities :
- 3D modeling and drafting of various equipments/assemblies, designing as per the customer requirement and computing various calculations for machine parts to check safety factor.
COMPUTER KNOWLEDGE
- Operating Systems : Windows 2K, Windows XP, Windows Vista.
- Drafting Tools : AutoCAD 2008 & 2010, Solid works, Catia V5.
- Others : MS Office, Photoshop.
EDUCATION
- PUC (PCMB)
Department of Pre-University Education, Karnataka
National College, Bagepally.
Percentage : 59.5%.
PROFESSIONAL QUALIFICATION
- B.E. (Mechanical Engineering)
GM Institute of Technology, Davangere,
Visvesvaraya Technological University, Belgaum.
Aggregate : 61.3%.
Hobbies : Numismatics, Stamps Collection....
Behavior Characteristics :
- Commitment to quality and results.
- Responsibility.
- Sincere in attitude.
- Presentation skills.
- Team Oriented.

I hereby declare that the above furnished details are true to the best of my knowledge.
Date:
Place: Bangalore (Praveen Kumar S.K.)

[Guest]

SOWMYA.P
sowmyaeeemec2012 AT gmail.com

CAREER OBJECTIVE :
Looking forward to a challenging & competitive work atmosphere where my skills, talents & abilities will be utilized to the fullest for mutual benefit in a long run.

STRENGTH :
- Punctual
- Smart Worker
- Optimistic Person

ACADEMIC PROFILE :
Course Institution University/Board of Study Percentage of marks Year of passing
BE Electrical and Electronics Muthayammal Engineering college, Namakkal Anna University of Technology,
Coimbatore 79.60%(upto 7th sem) 2012
HSC Saradha Higher Secondary School, Gobi State Board 78.60% 2008
SSLC Government Higher Secondary School State Board 90.50% 2006

SOFTWARE PROFICIENCY :
- Operating System : Windows XP & Windows Vista
- Design Tools : MALAB & Modelsim

AREA OF INTEREST :
- Transmission and Distribution
- Embedded Systems
- Fundamentals of c, c++

MINI PROJECT :
“SENSITIVE PLATE”
- Main objective of this project is to create precautions by producing sound on making contact with the plate.

CURRENT PROJECT :
“AUTOMATED SPEED CONTROL OF VEHICLES IN ACCIDENTAL ZONES”
- Main objective of this project is to avoid the disobeying of traffic rules and to prevent loosing of valuable life by using RF transmitters, RF receivers, sensors, electronic components and embedded systems.

PAPER PRESENTATION :
- Wireless charging of mobile phones at KPR Engineering College, Coimbatore

INPLANT TRAINING :
- Thermal power station, Mettur

CERTIFICATION :
- Completed BULATS Examination conducted by The University of Cambridge and Anna University of Technology, Coimbatore

LEADERSHIP QUALITY :
- Served as a School pupil leader in the year 2006 & 2008
- Organized many department functions

MEMBERSHIP :
- Active member in National Green/Eco Club sponsored by The Department of Environment

NATIONAL SERVICE SCHEME :
- Completed a period of Two years as NSS Volunteer from 2008-2010
- Actively participated in the Seven day Special Camping Programme on the theme of Healthy Youth For Healthy India in the year 2010

ACHIEVEMENTS :
- Secured School Second in 10th and had been awarded by Sakthi Masala private limited company, Mamarathupalayam, Erode
- Attended AIDS Awareness Camp at Government Teacher Training College, Perundurai in the year 2005
- Won many Prizes in Speech Competition at School level

DECLARATION :
I do hereby declare that the details furnished above are true to the best of my knowledge.
Place :
Date : [SOWMYA.P]

[Unregistered]

RESUME
Name : Farhana Mulla
E-mail : farhanamulla32 AT yahoo.com

Educational Qualification :
Passed SSC from ST mary’s high school.
Passed 12th Arts, through G.V.M’S higher secondary school.
Passed Graduation (Bachelor of Arts) through P.E.S college of Arts & Science.

Professional Qualification :
Completed Diploma in Microsoft Office.
Completed Certificate Course in Touch- Typing.
Completed Certificate Course in Accounting using Tally (with VAT).
Completed Pre-Primary teacher’s training course through Goa University.
Completed TESOL (Teaching English to Speakers of other Languages)Diploma course from American TESOL institute.
Achieved Certificate for the participation of Mathematics workshop.

Work Experience :
Worked as Kindergarten Teacher in “Little Tots Nursery & K.G for last 5 years.
Presently working as Kindergarten Teacher in Cambridge school for last 2 years till date.

Personal Details :
Father Name - Ismail Mulla
Date of Birth - 16-02-1981
Nationality - Indian
Religion - Islam
Gender -
Marital Status - Single
Language Known - English, Hindi and Urdu.
Hobbies - Enjoy teaching children, Reading, Typing, Drawing and Painting.

Declaration :
I here by declare that the above mentioned statements are true and correct to the best of my knowledge and belief.
Your’s Sincerely,
Farhana Mulla.

[neoarif]

RESUME
ABDUL ARIF
Email :abdularif.aero AT gmail.com

CAREER OBJECTIVE :
“TO CREATE A NICHE FOR MYSELF IN A PROFESSIONAL ORGANIZATION BY UTILIZING MY COMPREHENSIVE ANALYTICAL SKILLS AND PROBLEM SOLVING ABILITIES ACQUIRED. “

ACADEMIC PERFORMANCE :
P.G Level
M.Tech – Mechanical Engineering (Design)-Motilal Nehru National Institute of Technology-C.P.I-9.6

U.G Level
B.E ( Ae.S.I ) - Aeronautical Engineering (Aero-Mechanical) - Aeronautical Society of India, New Delhi,Dec-2010 - 62.05

School Level
XII ( B.I.E.A.P )- Sri Chaithanya Harita Jr. Collage, Kothagudem ,2005 -85.40
X ( S.S.C ) -Little Buds High School, Kothagudem,2003-81.80

AREAS OF INTEREST :
** Fracture Mechanics
** Finite Element Method (FEM).
** Gas Turbines

CERTIFICATIONS :
** Organization- CSC Computer Education, Chennai, Tamil Nadu (4 months)
** Program Title- Advanced Diploma in Java Programming (ADJP)
** Brief Description- Logic Building with C, C++, Sun Java 2.0

SUMMER INTERNSHIP :
** Organization- Maharaja Agrasen Institute of Technology, Rohini, New Delhi (6 Weeks)
** Program Title- Workshop Training
** Organization- Tagore Engineering Collage, Chennai, Tamil Nadu (6 Weeks)
** Program Title- Laboratory Training

INSTITUTE PROJECTS :
** INSTITUTE NAME – GANESH INSTITUTE OF TECHNOLOGY, CHENNAI
** PROJECT TITLE- MEASUREMENTS IN COMPRESSIBLE FLOW (GAS DYNAMICS)
** BRIEF DESCRIPTION- DIFFERENT TYPES OF INSTRUMENTS AND ITS PROCEDURE TO MEASURE THE PRESSURE, TEMPERATURE, VISUALIZATION OF COMPRESSIBLE FLOW

** INSTITUTE NAME – CSC COMPUTER EDUCATION, CHENNAI
** PROJECT TITLE- BANKING APPLICATION
** BRIEF DESCRIPTION- MAKING AN BANKING APPLICATION USING JAVA SWING

M-TECH THESIS :
o THESIS TITLE- NUMERICAL ANALYSIS OF FRICTION STIR WELDING (FSW) OF DISSIMILAR MATERIALS
** BRIEF DESCRIPTION- VALIDATING TEMPERATURE DISTRIBUTION & RESIDUAL STRESSES OF FSW OF ALUMINIUM ALLOYS WITH EXPERIMENT USING ANSYS

PAPERS PRESENTED/PUBLISHED :
** AS FIRST AUTHOR
** Name of conference- INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING
** Title- TEMPERATURE VALIDATION FOR FRICTION STIR WELDING (FSW) OF DISSIMILAR ALUMINUM ALLOYS
** Place & Data of Presentation- College of Engineering Pune, Maharashtra, May 2013
** Name of conference- 3RD INTERNATIONAL CONFERENCE ON PRODUCTION AND INDUSTRIAL ENGINEERING
** Title- FINITE ELEMENT MODELING FOR VALIDATION OF MAXIMUM TEMPERATURE IN FRICTION STIR WELDING OF ALUMINUM ALLOY
** Place & Data of Presentation- NIT Jalandhar, Punjab, March 2013

** AS SECOND AUTHOR
** Name of conference- INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING
** Title- ANALYTICAL STUDY OF STRESS INTENSITY FACTOR IN A THERMAL BARRIER COATED PLATE UNDER THERMAL VARING LOAD
** Place & Data of Presentation- College of Engineering Pune, Maharashtra, May 2013
** Name of conference- INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING
** Title- LIFE ESTIMATION OF NATURAL FIBER (BANANA) REINFORCED COMPOSITE UNDER CYCLIC LOADING
** Place & Data of Presentation- College of Engineering Pune, Maharashtra, May 2013

COMPUTER SKILLS :
** Languages : C, C++, Java
** Platforms : Windows Vista, 7, XP
** Web Development : HTML
** Packages : Matlab, Ansys, Catia, Hyperworks, Autocad

ACHIEVEMENTS/AWARDS IN TECHNICAL ACTIVITIES :
** Gold Medalist in M-Tech Mechanical Engg (Design), MNNIT(Allahabad), 2011 Batch

OTHER ACHIEVEMENTS :
** Secured 61 rank in Gate Examination (AE), 2011
** All India top in 4 subjects in B.E Aeronautical Engg, New Delhi

HOBBIES :
** Blogging
** Listening Music,Watching Movies
** Playing Cricket

I hereby declare that all the information given is correct to the best of my knowledge.
Date :
Place : Allahabad (Abdul Arif)

[Unregistered]

CURRICULUM VITAE
RAGHAVENDRA D. JAHAGIRDAR
Email ID : - rdjahagirdar06 AT yahoo.com

QA/QC, PRODUCTION ENGINEER
Offering 13 plus years of rich experience in Production & Q.A /Q.C Area
PROFILE :-
** Competent Engineering Professional offering extensive experience of 13 plus years, with
** In-depth knowledge and functional experience in supporting for all functional modules in multi-location environment with expertise in Operation Management/Development, Production, Quality Assurance & Quality Control.
** Adept at latest total productivity management techniques to ensure highest quality standards.
** Technically competent Mechanical Engineer offering a distinguished career in achieving professional excellence predominantly in Automobile Sector coupled with demonstrated capabilities of process rationalization, manufacturing flow harmonization, and bottleneck & defect identification for improving operational efficiency.
** Interpersonal and management skills with ability to handle multiple tasks. Exceptional talent for problem solving and ability to handle multiple functions and activities in high pressure environments with tight deadlines. A true team leader and acknowledged trouble-shooter.
** Merit in II & III year diploma.

TECHNICAL SKILLS :-
Software MS OFFICE, AUTOCAD-14 & 2000
Language C

PROFESSIONAL EXPERIENCE :-
M/S KATEEL ENGINEERING INDUSTRY PVT. LTD, BANGALORE
July 2013 to till date
(Kateel was founded in 1984 with a vision of being a high quality supplier of critical engineering components. Our vision is matched by our determination and dedication to exceed customer expectations in the levels of service and product quality. Since 2002, our quality management system for the design, manufacture and supply of braking systems has been assessed and approved to be in compliance with ISO 9001 :2008.Our products are exported to Europe and Australia. The wide range of our products finds special industrial use in the following areas: Steel Mills, Wind Turbines,Material Handling, Textile Machinery, Earth-moving equipment).
JOB RESPONSIBILITIES :-
DEPUTY MANAGER :-
** Make thorough analysis & study of drawing information checklist.
** Chart schedule of activities and judiciously deployed resources to maximize operational efficiency.
** Co-coordinator for new Product development from Quality Front.
** Daily updating Management board.
** Developed processes & formulations and establishing process parameters and carried out inspections of all the incoming raw materials as well as the outgoing finished products.
** Responsibility to meet production targets.
** Preparing monthly plans to projects contractual delivery dates for customers.
** Closely monitoring for assembly bottle necks.
** Handling development items study & preparation of good Kaizen.

M/S HYDROLINE INDIA, DHARWAD PLANT
Oct 2011 to May 2013
(It is a company, manufacturing various types of Hydraulic Tubes and hose supply to Telcon.Back loader, excavator model etc…)
JOB RESPONSIBILITIES :-
QUALITY ENGINEER :-
** Contribute engineering inputs to define technical specifications of equipment and delineated lucidly the scope of project.
** Make thorough analysis & study of drawing information checklist.
** Chart schedule of activities and judiciously deployed resources to maximize operational efficiency.
** Co-coordinator for new Product development from Quality Front.
** Daily updating Management board.
** Developed processes & formulations and establishing process parameters and carried out inspections of all the incoming raw materials as well as the out going finished products.
PRODUCTION ENGINEER :-
** To prepare daily Production Planning activity.
** Identify & check in-house raw material as per order issued by Production dept.
** Responsibility to meet production targets.
** Preparing monthly plans to projects contractual delivery dates for customers.
** Coordinating with production manager for all production issues to reach monthly targets.
** Assisting in coordinating with all departments so as to improve production & quality of products.
** Closely monitoring for assembly bottle necks.
** Handling development items study & preparation of good Kaizen.
** Ensuring the material position from material dept.
** Allocating resources like material, men, machines etc…. to the contractors.
** Witnessing all field tests including Hydro test & dye penetrate.

M/S SITSON INDIA PVT.LTD. DOMBIVLI
Dec 2007 to Sept 2011
(It is a company, manufacturing various types of boiler headers, heat exchanger, dust collector, traveling grate assy. Etc required for sugar factory , Errection & commission the sugar Factory)
JOB RESPONSIBILITIES :-
** Prepared daily production planning activity.
** Identify & check In house raw material as per order issued by production dept.
** Daily management board updating is part of my job.
** Developed processes & formulations and establishing process parameters and carried out inspections of all the incoming raw materials as well as the out going finished products.
** Maintenance of documents is a part of my job.
** Responsibility to meet production targets.
** Preparing monthly plans to projects contractual delivery dates for customers.
** Coordinating with production manager for all production issues to reach monthly targets.
** Closely monitoring for assembly bottle necks.
** Ensuring the material position from material dept.
** Allocating resources like material, men, machines etc…. to the contractors.
** Knowledge about ASME piping & welding & ASTM standards.
** Witnessing all field tests including Hydro test & dye penetrate.

M/S. STAR AUTO INDUSTRIES PVT. LTD. MUMBAI
May 2002 to Nov 2007
(It is a company, manufacturing various types of Auto ancillaries parts for TML, FORCES MOTORS M&M….etc Parts like Bumper, Glass Run Channel, Rain Channel….etc)
JOB RESPONSIBILITIES :-
** Responsible for in-house calibration of checking fixtures, checking templates & checking moulds.
** Developed processes & formulations and establishing process parameters and carried out inspections of all the incoming raw materials as well as the out going finished products.
** Active participation in Customer audits, internal audit.
** To train the inspectors & Asst. Engineers towards continual Improvement, through conducting the trainings on SPC, R&R studies….etc. Reviewing control plan, process flow chart, control charts, PFMEA, MSA reports and suggesting corrective action.
** Assisting in day today Inspection Activities, review of quality reports &records.
** Taking the disposition on defective samples by conducting functional tests.
** Analysis of customer complaints & Implementation of the correctives actions.
** Ensuring timely closure of NC's. internal auditors training etc
** Maintain the TS 16949 systems & procedures.
** Active participation in APQP Activities & submitting PPAP documentation to customers.
** Heading the monthly quality meetings & updating the improvements needed to the management. Ensure the promotion of awareness of customer requirements throughout the organization.
** Maintenance of documents is a part of my job.
** Preparing monthly reports of QA, PPM, Cost of quality & Rework cost.
** Analysis of supplier’s performance and maintenance of supplier’s quality ratings.
** Daily management board updating is part of my job.
** Monthly rejection review, Root causes Analysis & presentation of the same to management. Root cause analysis quality problems, identifying and implementing corrective and preventive actions.
** Conducting root cause analysis using tools like 8D, 5Ws, cause & effect diagram or fault tree analysis.
** Co-coordinator for new Product development from Quality Front.

M/S SAROJANI STEEL PVT LTD. SOLAPUR
Jan2000 to Apr 2002
** Deputed to handle the observation day to day activity, preparation of inspection report and maintaining production document daily.

EDUCATIONAL CREDENTIALS :-
B.E (Mechanical Engineering), 1999 Shivaji University, Kolhapur- 64.54%
Diploma in Automobile Engineering, 1996 B.T.E Board, Mumbai - 70.00%
S.S.C, 1993 Pune Board - 68.57%

Academic Projects : -
B.E Project Title : Automatics Solar Tracking System, 1998-99
Walchand Institute of Technology, Solapur

Diploma Project Title : Steering Control Head Lights, 1995-1996
S.E.S, Polytechnic, Solapur

Accolades
- Merit in II & III year diploma.
- Student member of “Indian Society for Technical Education” Chapter 1997-1999 & actively participated in various activities.

Special Training Obtained :
1) Awareness Training For ISO-9002 :1994 / QS-9000:1998/TS-16949.
2) SPC, MSA, APQP, FMEA.
3) “KAIZEN” Form TATA MOTORS LTD.

Date of birth : 29TH July 1977
Linguistic Proficiency : English, Hindi, Marathi, and Kannada

Date :
Place : Raghavendra Jahagirdar