Resume CV : Instrumentation Engineer

[rethukk]

Dear Sir / Madam,
With reference of website, I would like to apply to the post of any Instrumentation job and believe that my education and employment background are appropriate for the positions.

I have 7+ years experience in Instrumentation and Control Systems, engineering, construction & maintenance , FAT, SAT, commissioning, functional loop and interlock check, operation of DCS, PLC, FGS and ESD systems, in Oil&Gas, Petrochemical, Power Plant, Paper Plants and Pipe Line.

Presently I am working for KHARAFI NATIONAL as Instrument Foreman ( Calibration and Commissioning) for 40” gas pipe line from BS131 to MAA Refinery, involved in Calibration and Commissioning. I am an Approved Permit Holder of Kuwait Oil Company.

With Thanks & Regards,
Shaji John

Resume :
Shaji John
Email : shajipovanam AT yahoo.com

Objective :
Intend to build a carrier with leading co-operative of hi-tech environment with committed and dedicated people which will help me and to explore myself fully and realized my potential willing to work as a key player in a challenging & creative environment to develop and explore new concept of Electronics, Automation & Process Instrumentation.

PROFESSIONAL HIGHLIGHTS :
Eight years of experience in Instrumentation planning, Installation, Calibration. Supervision, DCS & PLC Operation, Pre-Commissioning and Commissioning activities, day to day plant maintenance, routine Preventive maintenance for critical instruments, Shutdown overhauling, online fault finding in Gas Plant, Petrochemical Plant, Chemical Plant, Power Plant ,Paper Industry and Pipe Line. Also I have knowledge about SIS & FGS Operations. Gained knowledge in the Engineering operation of Yokogava Centum 3000, Bentely Navada 3500 series, Honeywell RDC 3000, Vibration Monitoring system, ESD and Field bus. Familiar with Suadi Aramco Engineering standards, Hazardous area calcification etc. for Instrumentation Systems.

Educational Qualification :
S.S.L.C ( Board of Public Examination, Secondary )
Plus Two ( Board of Public Examination, Higher Secondary )

Technical Qualification :
Engineering Diploma in Electronic Engineering ( 3 Year )
Govt : Polytechnic College, Punaloor, Kerala.
Post Diploma in Instrumentation Technology ( 1 Year )
Vinayaka Mission University, Selam, Tamil Nadu.

WORK EXPERIENCE :
From Apr 2010 to Still Continue : INSTRUMENT FOREMAN with KHARAFI NATIONAL (Petrofac,.) for 40” Gas Pipe Line, KOC Project, Kuwait.
From Mar 2009 to Oct 2009 : INSTRUMENT SUPERVISOR with GCC- FAFCO (Snamprogetty, Itelly) for Khurais Crude Contract, KCC Project, (SaudiAramco), Khurais, KSA.
From Feb 2008 to Dec 2008 : INSTRUMENT SUPERVISOR with FAFCO (Sumitomo Chemical Engineering Company, Jappan.) for Rabigh Development Project, Polypropylene Plant (PetroRabigh) KSA.
From Apr 2007 to Feb 2008 : SENIOR INSTRUMENT TECHNICIAN with FAFCO (Snamprogetty, Itelly)for Hawiyah Gas Treatment and Compression Facilities Project (SuadiAramco ) KSA.
From Dec 2006 to Mar 2007 : INSTRUMENT SUPERVISOR in NTPC ( Production of Electricity from Thermal Enginery ) Kayalamkulam, Kerala, India.
From Dec 2003 to Jan 2005 : INSTRUMENT TECHNICIAN with EVA Engineering Contractors for Hindustan News Print Ltd, Kottayam, Kerala, India.
From Jan 2003 to Dec 2003 : INSTRUMENT TECHNICIAN with EVA Engineering Contractors for Kerala Minerals and Metals Ltd , Kollam, Kerala, India.
From Nov 2001 to Dec 2002 : INSTRUMENT SERVICE ENGINEER in Poovanam Weighing Systems (Weighing Instrument Dealer ) Kottarakara, Kerala, India.

EXPERIENCE IN GULF :
Duties as Instrument Foreman with KHARAFI NATIONAL
# Project in 40” Gas Pipe Line, Kuwait.
Position : INSTRUMENT FOREMAN
Work Experience :
* Project team player with strong communication skills and co-ordination.
* Installation, calibration and trouble shooting of all field instruments like
Smart Transmitters (Honeywell, Rosemount, Yokogawa, and ABB), Ultrasonic flow meters Magnetic flow transmitters.
* Site Acceptance Test (SAT)
* Team leader with good technical skills, including commercial and procurement knowledge.
* Supervision, Monitoring and Coordination of manpower utilization, effectiveness and productivity
* Trouble Shoot all the problems in the Instrumentation system.
* Review & Modification and As- built of drawings.
* Loop folder making
* Prepare and Submit progress report to section head and the client.
Duties as Junior Instrument Engineer with FAFCO-GCC

# Project in Khurais Crude Project, Khurais, KSA.
Position : INSTRUMENT SUPERVISOUR (Loop & Punch list co-ordinator)
Work Experience :
* Team leader with good technical skills, including commercial and procurement knowledge.
* Supervision, Monitoring and Coordination of manpower utilization, effectiveness and productivity
* Clear the all Punch items in the plant as per Saudi Aramco Engineering Standard
* Trouble Shoot all the problems in the Instrumentation system for Loop checking
* Site Acceptance Test (SAT)
* Functional Loop check ( Planning, Coordination and Execution)
* Review & Modification and As- built of drawings.
* Loop folder making
* Co-ordinate Q C activities and Pre- Commissioning Activities.
* Prepare and Submit progress report to section head and the client.

# Project in Rabigh PC 1 Project, Rabigh KSA.
Position : INSTRUMENT SUPERVISOUR
Work Experience :
* Calibration of Transmitters, Valves and Fire & Gas Detector.
* Site Acceptance Test (SAT)
* Functional Loop check ( Planning, Coordination and Execution)
* Functional Interlock check ( Planning, Coordination and Execution)
* Review & Modification and As- built of drawings.
* Pre- commissioning, Commissioning and Trouble Shooting.
* Start Up checking
* Construction Supervision and Installation Monitoring.
Responsibility
* Supervision, Monitoring and Coordination of manpower utilization, effectiveness and productivity.
* Responsible for Site Acceptance Test (SAT) to ensure the equipment if it is in good working condition and without any damage from shipment.
* Review and coordinate preparation of Functional Loop and Inter Lock Test folders and procedure.
* Responsible for coordination, execution and scheduling of Functional Loop Test to ensure the instruments are working accordingly.
* Responsible for coordination , execution and scheduling of Dry and Wet Interlock and Function test of the systems.
* Involved in Testing and Commissioning works including Troubleshooting and Punch Clearing.
* Review specification, datasheet, drawings and Instrument installation for conformity.
* Coordinate with other discipline, determines and recommends to construction and engineering discrepancies
* Review and modification and As-built of drawings.
* Conduct meeting to imposed an emphasis to a problems and improve work production.

# Project in Hawiyah Gas Treatment and Compression Facilities, Hawiyah, KSA.
Position : SENIOR INSTRUMENT TECHNICIAN
Work Experience
* Calibration of Transmitters and Valves (especially in Field bus Control Valves)
* Trouble shooting of Motor Operated Valve (MOV)
* Working in cable glanding, cable termination, instrument installation, cable insulation resistance checking (Meggering), Pre loop checking (Hardware checking) and loop checking.
EXPERIENCE IN INDIA
Duties as Instrument Supervisor with NTPC, Kayalamkulam, India.
* Installation, calibration and trouble shooting of all field instruments like
Smart Transmitters (Honeywell, Rosemount, Yokogawa, and ABB), Ultrasonic flow meters, Magnetic flow transmitters,
* Day to day plant maintenance, routine Preventive maintenance for critical instruments, Shutdown overhauling, online fault finding, Calibration of Transmitters using and Loop Checking.
* Installation, calibration and trouble shooting of pressure switches, temperature switches, flow switches and level switches.
* Installation, calibration of converters like P/I, I/P etc,
* Well versed with P&ID, Logic diagram, Functional Schematic, Pneumatic/impulse hook up etc.
* Review and modification and As built of drawings.
Duties as Instrument Technician with EVA.
# Project in Hindustan News Print Ltd, Kottayam, India.
* Instrument Calibration, Maintenance and Trouble shooting.
* Working in PLC and DCS systems.
* Calibration of Ph meter, conductivity transmitter & O2 analyzer
* Installation, calibration and trouble shooting of Control valves like Fisher, Masoneilan, etc.,
# Project in Kerala Minerals and Metals Ltd, Kollam, India.
* Cable tray making, cable laying, cable glanding and cable termination.
* Cable insulation resistance checking (Meggering).
* Loop checking and commissioning.
Duties as Instrument Service Engineer with Poovanam Weighing Systems, Kottarakara, India.
* Weighing Instrument Installation, Calibration and Trouble shooting.
* Prepare and submit daily progress report to section head.
* Site Acceptance Test (SAT)
* Factory Acceptance Test (FAT)

SAFETY TRAINING :
Undergone Safety Training from Saudi Aramco (SAGO, Human Resource development Division)
Undergone Safety Training from Kuwait Oil Company ( KSC )

Pessonal Skills :
Computer knowledge : AUTOCAD, MS Office, Page Maker.
Languages Known : English, Malayalam, Tamil and Hindi.

Declaration :
I hereby declare that the above mentioned details are true and correct to the best of my knowledge and belief.

Place :Kuwait,
Date :10/06/2011.

SHAJI JOHN

[Guest]

I am Bennys Joseph. I had completed my 3 year diploma in instrumentation and control. I am a fresher to this field. Is their any job vacancy for freshers.