www.avalon.co.in Technologies India Pvt Ltd Pune : Mechanical Engineer

[muthukalee]

avalon.co.in
• Electronic Design Engineer:
BE (Electronics), 2-3 years experience, Good knowledge of Embedded system design, RTOS,
C programming

• Mechanical Design Engineer :
BE (Mechanical), 2-3 years experience in product design

• QC Head :
Graduate with 10-15 years experience in electronic industry. Good knowledge of ISO procedure and product certification

• Head- Business Development :
Graduate with 10-15 years Sales/ Marketing experience preferably in industrial product, with some exposure to international marketing

About us :
Avalon Technologies (India) Pvt. Ltd. is a well known and a trusted name for crane safety systems. Our product helps ensure occupational safety and increased productivity. We have staked our reputation on our product quality and responsive service.

Contact us :
Avalon Technologies (India) Pvt. Ltd.
Avalon House, 62, East Kirkee, Sappras,
Pune, Maharashtra, INDIA - 411003
Tel : 020-2668 8164/ 2661 4320,
020-3254 3253/ 3250 1012
Email : sales@avalon.co.in
http://www.avalon.co.in

[Guest-IJT]

Curriculum- Vitae
Name : SYED SADAT AHMED
Father’s Name : Late Syed Sultan Ahmed
Career Objective : To grow professionally with the opportunity to explore
my ability and skills. I want to carry responsibility and challenges which helps to establish myself as an entrepreneurial hallmark.
Date of Birth : 08-12-1985
Sex : Male
Qualification : B. Sc. Engg. (Mechanical): 1st Class with Distinction.
Exam Passed Year of Passing Board / University School / College % of Marks
B. Sc. Engg. (Mechanical) 2008 Magadh University, Bodh Gaya R. P. Sharma Institute of Technology, Patna 72.4
10 + 2 2002 B. I. E. C., Patna R. P. S. College, Patna 54
X th 2000 C.B.S.E., New Delhi Baldwin Academy, Patna 67


Correspondence Address : “AMITY HOUSE”
Nohsa Road,
Phulwari Sharif,
Patna – 801 505
E-mail ID : sadat02 AT rediffmail.com / sadat.rpsit AT gmail.com
Mobile No. : 09835045530, 09835666553
PROJECT :
(i) Study of conventional carburetor & its replacement with MPFI (Multi Point Fuel Injection) system.
(ii) Project & Vocational Training from Heavy Engineering Corporation Ltd. (HECL - a Govt. of India Enterprise), Ranchi, Jharkhand at the following plants :
a. Heavy Machine Building Plants (H.M.B.P.)
i. Heavy M/C Shop.
ii. Medium & Light M/C Shop.
iii. Reduction Gear Shop.
b. Foundry Forge Plant (F.F.P.)
i. Heat Treatment & Fettling Process.
ii. Pattern Repairing Shop.
iii. Machinery of Locomotive, Crank Shaft & Different Products.
iv. Forging of 120 Ton Ingot.
c. Heavy Machine Tool Plant (H.M.T.P.)
i. Machining of Locomotive, Crank Shaft & Different Products.
ii. Machining & Assembling CNC, V.T.B. Machine & Lathe Machine.
COMPUTER SKILLS :
1. Operating System : MS-DOS, MS-Windows.
2. Package : MS-Office (Word, Excel, Power-Point).
3. Internet, Multimedia.
KEY SKILLS : Team Player, Convincing Nature, Self Motivated.
HOBBIES : Communicating & Making Friends,
Learning & Teaching.


(Syed Sadat Ahmed)
Date :

[Guest]

RESUME
Ramesh.B.Pujari
E-mail :rameshpujari16 AT gmail.com
OBJECTIVE :
Seeking a classical opportunity to serve in your esteemed organization and prove myself worthy in the uplift of the organization. My professional skills and abilities can be utilized for the growth of the company as well as to thrive my career.
EDUCATIONAL QUALIFICATIONS : Bachelor of Engineering (B.E)
Specialization : Mechanical Engineering
College name : P.D.A College of Engg. & Tech, Gulbarga
B.E Aggregate : 8.0 (FCD)
2nd PUC March .2000 PU board Basaveswara College, Bagalkot 50.00% SC
SSLC March .1998 KSEEB Siddarameshwara High School, belgaum 52.00% SC
B.E April.2011 (2007 to 2011) Autonomous VTU, Belgaum P.D.A. College of Engg. & Tech., gulbarga
8.0 (CGPA) FCD
Technical Skills :
- Languages : Autocad,CATIA-V5,CNC programming.
- Interested subjects : SOM, KOM, BTD & CAD.
Work Experience : fresher
Extra Curricular Activities :
- First prize in hollyball.
- Actively participated in college and departmental ‘cultural and sports activity’.
- First prize in Badminton singles.
Project Details :
- Project 1 : “ELECTRIC AIRCRAFT THROUGH REMOTE CONTROLLED”
- The tilt rotor Aircraft has a combined feature of Helicopter and Airplane.it works on the principle of the vertical take off and landing( vtol) cababilities of a helicopter and the high speed,long range.and service ceiling of a propeller airplane.
- It is s twin engine,twin rotor airplane working model.
- High load carrying capacity for the same power consumed by conventional airplane and helocopter .
- High wing, twin- tail design.
Personal Skills :
- Efficient time management and corresponding work allotment.
- Dealing with people diplomatically.
- Capability of learning fast and in an interesting way.

[Guest]

To,
The Human Resource manager,
Avlon technologies
Chennai.
Sub : Application for suitable job in R&D , Design & Development
Dear Sir,
I am a Diploma & Post Diploma (CIPET) candidate having more than 15 years experience in different automobile industries. Having vast experience in Plastic mould making, Design, Moulding fields.
I have experience to work individually & manage -team manpower in different level.
For last one & half year working as a “Design & Development – Head” in leading automobile company. Where I individually lead a team to develop several type of Brush holder, Lighting assay for four wheeler.
If I get opportunity to work in your esteemed concern .I shall proof my abilities.
Thanks &Regards
C.Siva
09841935848
SIVA.C
13/6, 1ST Street, Ganapathy Colony, St. Thomas Mount, Chennai – 600016, Tamilnadu, India, Mob : 9841935848 Email: siva.choc AT gmail.com
- Diploma in Mechanical, Post Diploma in Plastic Mould Design with 17 years experience in design and development, manufacturing and vendar development
CORE STRENGTHS
Hands on experience in Plastic Mould design, Making & moulding
Expertise in using AutoCAD, UniGraphics
Experience in automobile accessories process line setup , child parts development
Plan & execute projects within stringent time and budgetary constraints within the
quality standards
EDUCATION & CREDENTIALS
Post Diploma in Plastic Mould Design (1996-1997)
Central Institute Of Plastic Engineering & Technology (CIPET),
(Under Ministry of Chemicals & Fertilizers),
Chennai, Tamilnadu, India.
COURSE CONTENT : Design of Injection Moulds, Compression Moulds, Blow Moulds, Transfer Moulds & Extrusion Dies
Course Duration : One Year
Diploma in Mechanical Engineering (1990-1993)
Govt. Polytechnic,
Nagercoil, Tamilnadu, India
COURSE CONTENT : Studying Mechanical field with machine shop technology
Course Duration : Three Year
Hsc (1988-1990)
MEENACHI SUNDARAM MEMORIAL HIGHER SECONDARY SCHOOL,
IDAIKAL, Tamilnadu, India
S.L.C (1987- 1988)
MEENACHI SUNDARAM MEMORIAL HIGHER SECONDARY SCHOOL,
IDAIKAL, Tamilnadu, India
PROFESSIONAL EXPERIENCE
Jas Enterprises, Mumbai
E.D.M operator June ‘93 Aug ‘95
The company has got sophisticated Tool room. The company was making plastic injection moulds for home appliances (like coat cleaner, Hand mixer Grinder, Air- freshener bodies etc.), industrial components and Toys.
Job Responsibilities
- Learning, operating machines as per senior operator instructions
- Learning to check copper electrode with basic measuring instruments MIC, Vernier
- Checking the electrodes and job settings on the machine
- Discussing & setting current range to achieve spark gap
- Discussing machine setting with senior operators
- Periodical machine maintenance
- Machinery handled- Electric Discharge Machine(EMS 5030,EMS 4025,EMS 15)
EDM Section in charge Sep ’95 to May ‘96
- Studying sparking detail drawings & Discussing with Tool makers to instruct EDM operators
- Involving discussion with tool maker to split electrodes like finishing, semi finishing, roughing
- Deciding raw materials for electrodes
- Planning machine load with toolmaker for mould priority
- Involving & instructing operators to electrode machining in tool room
- Studying Mould assembly drawings for detailing EDM work, assisting mould makers ,operators through hand sketching mould parts
- Individually operating basic tool room machines to make electrodes in emergencies situation
- Machinery handled- Lathe, Drilling Machine, Vertical Milling M/C, Manual surface-grinding
HANDLING EQUIPMENT :
- Vernier Caliber.
- Micrometer
- All Types of Gauges.
Electromags
(A Div Electromags Automotive Products PVT Ltd)
(www.electromags.com)
Tool Room Engineer Aug ‘97 to Oct ‘02
An ISO 9002 company . The company is having Tool room, Production unit & QC dept. Here the Company Developing and Manufacturing Alternator, Starter motors spare parts & Industrial Components like End covers, Brush holders, slip ring, Bearing caps, Plug caps, Floats, Bobbins & Automobile accessories
Job Responsibilities
- Designing injection , transfer, compression moulds for different alternator spares & various type of slip rings, Brush holder, Bearing caps etc., and doing reverse engineering to prepare component drawings
- Explaining mould designs to in-house tool maker, and guiding tool making process
- Worked as a die maker & Completed number of Injection , compression & Top, Bottom transfer moulds
- Participating mould design discussion with management
- Interacting mould design with vendors, and giving suggestion
- Checking and discussing reverse engineered products with development team
- Approving vendor mould designs
- Preparing cost estimation for moulds
- Maintaining mould design change records for ISO systems
- Designing jigs and fixture to assist production
- Attending major tool making problems in vendor
- Planning In-house production mould for maintenance in case of breakdown
- Involving weekend meeting to update the tool development , maintenance tool correction status with MD & other department heads
- Directly reporting tooling status to MD.
- Attending trial at supplier end, in house,
- Checking functional requirement with newly developed samples
Key Achievement :
- Bosch(Australia) - Solenoid caps, End covers, Bobbins for(TVS), Terminal protector,
- Field moulding for (TVS), I successfully designed slip ring mould for Robert Bosch
- Designed and fabricated more than 52 moulds as injection, compression moulds ,Top & Bottom transfer moulds within 5 Years period
- Finished double cavity Top transfer mould - slip ring – Dough moulding compound(DMC) in15 days within competitive less budget, compare to outside source &Received reward amount from management.
- Introduced ASSAB imported steel for higher volume production moulds like PLUG GAP ,moulds
- Well processing knowledge about thermo set materials like DMC , Phenolic ,MF
- Successfully added a new vendor for mould fabrication & some pre machining,
Standard mould parts
- Developed a modern tool room setup with all basic tool room Machines
Threyes Sreenisons Harness Pvt. Ltd., Chennai
(www.threyes.com)
Development Engineer December ’02 to Apr ‘05
An ISO 9002 company . The company manufacturing wiring harness
For four wheelers ,Two Wheelers & supplying to TVS pondichery ,SL LUMAX Irunkattukottai ,INDO JAPAN LIGHTING , Thiruvallur.
Job Responsibilities :
- Analysing customer inputs , discussing with development team
- Product design
- Product Verification
- Material Selection
- Mould Design verification
- New Product Development Activities
- Make a New Mould as Per Requirement
- Moulds follow up
- Mould Maintains & Productivity Improvement Activities
- Maintaining ISO documents
- Customer Complaints Handling Coordinates With QC Members
- Supplier Development Activities
- Supplier Follow Up During New Product Development
- Documents and Formats Preparation
- Preparing a Timing Plan to speed up the development activities
Key Skills :
- Well Knowledge in mould design,Mould fabrication
- Well Exposure in Preparing a PPAP
- Knowledge in Geometric Dimensioning & Tolerance
- Knowledge in DFMEA & PFMEA
- Well Exposure in Product Design.
Key Achievement :
- Room lamp assembly –Threyes-SL Lumax-General motors
Developed all child parts & made a line set up for assembly within short period
- Water leak test special purpose fixture to ensure Bulb holder locking force
HANDLING EQUIPMENT :
- Profile projector
- Other measuring instruments
PRECIMIND, Chennai.
Works manager June ‘05 to Sep 09’
An high-tech tool room with plastic processing unit for manufacturing very complicated automobile plastic components.
Job responsibilities
- Canvassing new mould orders
- Preparing Mould quotations, Discussing with customer for quot finalisations
- Discussing With customers for input datas like 3D model,2D drawing,Reverse
Engineering, Moulding material data sheets,Material availability for sampling
- Preparing preliminary designs for mould fabrication
- Involving design feasibility discussion with customers
- Preparing time plan to complete the mould within time frame
- Discussing & guiding designers to build the design in economical maner
- Planning &ordering mould base, standard parts
- Involving discussion with designers& Die makers for mould making
- Monitoring mould making priority for different customers
- In urgency working with mould makers to complete the mould within time frame
- In urgencies operating all tool room machines
- In case of complicated mould design Extracting core cavity to assist designers
- Individually Designing complicated multi cavity moulds
- Attending mould trials
- Studying & comparing samples with customer datas ,assisting to prepare sample inspection report
- In case of in house production assisting to arrive shift rate for machine,component cost
- Assisting to submit samples with PPAP documents
- Attending customer complaints for supplied plastic components Tool related , Quality related
Machineries handled
- All basic tool room machines including EDM,Well working knowledge about Wire cut,CNC Milling
Instruments handeled
- All basic instruments,Slipgauge with sin bars,bore dial gauge,Height masters,Profile projector
Mechanical software used
- Well Working knowledge in
Auto Cad 2004-2007 2D Software, UNIGRAPHICS NX 3 – NX6 3D Modeling
Key Skills
- Well experience in plastic Auto mould designing, Mould making ,Trouble suiting in plastic component production
- Well operating knowledge of Multi plast vertical injection moulding machines single bottom double bottom machines
Projects in Precimind
- Double cavity Auto mould for Head lam bulb holder for - four wheeler (Nylon 66 40%MF), Threyes Srinisons Harness Privat Limited– IJL – Maruti
- Double cavity Auto mould for parking light holder - four wheeler(Nylon 6 15%GF)
Opel auto – IJL – TOYOTO
- Four cavity auto mould for Two pole connector - Power window harness for four wheeler (PBT Unfilled Black) Opel auto –IFB – TATAMOTORS
- Four cavity Auto mould for Switch bracket - For Four wheeler safety belt harness
Opel auto – AUTOLIV – TOYOTO
- Eight cavity Auto mould for P 17 front Stem Front brake harness – For Two wheeler (Nylon 66 Unfilled black) SWITCH INTERNATIONAL - HERO HONDA
- Four cavity semi auto mould for Wiper Rod Insert moulding component with double stage ejection For Four Wheeler (Delrin Durocon M90 Natural) OPEL AUTO –MITSBA SICAL INDIA LIMITED - MARUTI
- The above components produced in PRECIMIND & supplied to customers As child parts,I have very much knowledge of working concept,quality concept for such components
- The all above projects I individually designed &made a mould in precimind
Opel Auto Products Pvt.Ltd
(www.opelauto.in)
Design & Development Head Oct ‘09 to Till date’
A TS company, Engaged in manufacturing harness assembly for four wheeler, Two wheeler. Recently developing, supplying Lamp assembly, Brush holder, & other motor assembly parts for various OEM customers in India.
Job Responsibility
- Prilliminary study of drawings &clarifying with customers for new projects
- Preparing Preliminary quote for child parts, process & Full Assy
- Sharing discussion with NPD team
- Selecting CFT members
- Meeting with management for final Quot preparation
- Discussing with CFT members for APQP
- Suppliers Selection for child parts development, discussing design feasibility with supplier & Design approval.
- Material Selection And Sourcing
- Working as a Project Head for various project
- Achieving consistent, good quality assembled products through continuous concept planing
- Participating project review meeting with customer .
- Explaining &discussing about jigs ,fixtures ,Special machines during customer visiting
- Assisting process engineers to contuct frequent trial for new project
- Preparing action plan for project
- Assisting process engineers to prepare,Display OSP
- Assisting engineers to prepare Proces flow diagram ,FMEA,Control plan
- Approving & Forwarding inspection report and Preparing corrective action plan
- Visiting suppliers end periodically to update the development projects
- Attending child parts trial at supplier end
- Conducting FDPR at supplier end with customers
- Supporting development purchase team
- Attending customer complaints during development stage, sorting out root causes
Key Skills
- Receiving child parts quote from supplier &Finalising quote with very competitively
- Developed a Skill to discuss with sheet metal parts supplier for arriving Tandem type tooling stages, Progressive die design feasibility for different sheet metal parts
- Successfully developed &introduced rubber components supplier,
- Involved to develop thermoplastic elastomer parts
- Developed a in-house moulding unit, press shop
- Welding electrodes designing, selecting different electrode material for different size, parts welding
- Designing special type welding fixtures
- Developed modern inspection lab to inspect child parts
- Designing different type of gauges to increase production with consistantquality standard
- Involved in cost reduction activity by indroducing SPM to assist improving production norms
- Training GET to suit & work within our environment
`
Assembly projects
- Coooling motor brush holder assembly - Opel Auto - Dong Yang Mechatronics -Maruti
- Radiator motor Brush holder assembely - Opel Auto - Indrad Auto components -Tata
- Engine cooling motor Brush holder assembly - Opel Auto - IFB – Tata Motors
- Starter motor TS12 Rear Part Assembely - Opel Auto - Valeo - Ford
- Coil switch Assembly for solenoid - Opel Auto - Valeo - Hyundai
- Gear Cover Assembly for Wiper motor - Opel Auto -Bosch – Hyundai
- Room lamp assembly for Car - Opel Auto - IJL - Toyoto
In all above project I was working as a Project Head, I have through knowledge about all child parts plastic, sheet metal, and rubber & assembly line setup, Process.

DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge.
Place : Chennai C.SIVA

[Guest]

R.VIGNESHKUMAR
Email :vigneshkumar2205 AT gmail.com
To join in a leading organization where I can implement my acquired technical skills and knowledge for the growth of the organization and self, be a competitive professional.
CLASS / COURSE NAME OF THE INSTITUTION BOARD OF STUDY YEAR OF PASSING MARKS%
B.E(MECH) SACS M.A.V.M.M engineering college,Madurai Anna University 2011 70%
XII P.K.N Higher secondary school, Thirumangalam, Madurai Tamil Nadu State Board 2007 62%
X P.K.N Higher secondary school, Thirumangalam, Madurai Tamil Nadu State Board 2005 81%
- Autocad
- Inventor
- Ansys
- Maintenance Engineering
- Design
- Design and fabrication of “Pneumatic coin sorter for time reduction process”.
- “Reduction of belt cutting time to increase production rate” done at
FENNER INDIA LTD., Madurai.
- Undergone in plant training in sun pressing(P) ltd for 3day during 2009.
- Visited Hindustan photo in Ooty and Auromira thermal power plant in
. T.kallupattai
- Participated and won many competitions.
- Member of NSS and attended 10 days NSS Camp during first year of my
B.E.
- Selected as Representative during my final year of B.E
- Reading books
- Listening to music