www.lupinworld.com Lupin Ltd Mumbai : Mechanical Executive

[muthukalee]

Exceutive-Mechanical
Edu Qualification : B. E. (Mechanical)
Experience : 4-6 years
Job Description :
Operation & maintenance of utility equipments like fired boilers, refrigeration and air-conditioning system, N2 plant, compressed air system, HVAC system, DM water ,soft water plant, cooling water system, cold rooms, air conditioners, freezers, ener

About us :
Headquartered in Mumbai, India, Lupin Limited today is an innovation led transnational pharmaceutical company producing a wide range of quality, affordable generic and branded formulations and APIs for the developed and developing markets of the world. Dr. Desh Bandhu Gupta’s vision and dream to fight life threatening infectious diseases and manufacture drugs of highest national priority led to the formation of Lupin in the year 1968.

Contact us :
Lupin Ltd
B/4 Laxmi Towers
Bandra Kurla Complex
Bandra (E)
Mumbai 400 051
India
Phone : +91 22 6640 2222
Fax : +91 22 6640 2130
info@lupinworld.com
http://www.lupinworld.com

[Guest-IJT]

Kind Attn:Sunil Tammana,

Please find attachment of my C.V for Navi Mumbai, India Office.

This is With ref. to advertisement in Internet.

Presently I have finished my 2 years contract with Bombela Civil Joint Venture Pty Ltd. (Gautrain High speed Rail Link Project) in Johannesburg (South Africa) as a Methods Engineer.

I have done Two years Draughtsman’s Diploma from Government of India (N.C.T.V.T).

I am having more than 25 years Practical working experience on Metal Building System, Petrochemical, OIL & Gas, Chemical, Industrial, Power, Infrastructure, Highways, Bridges, University campus, High rise residential and commercial Buildings.

More than 13 years in Consulting Engineers Firm and 12 Years with multinational Companies. Like U.K., U.S.A, U.A.E. based.

Thorough Knowledge AutoCAD 2007, SDS-2, Cads-RC, Re-bar CAD.

I am looking for a new opportunity, so I would like to apply for the same.

Waiting for favourable reply.

Regards

Ramdas Awhad


From:
Ramdas B Awhad
Suyog Appartment,
PL6A/7/11,Sector-1,Khanda Colony,
New Panvel, Navi Mumbai-410216.
Date: 29th May 2009.

To,
Advertiser,
Subject: Application for the post Sr. Reinforced Concrete / Structural Steel Draughtsman / Detailer / Checker. (Ref.I.D.-25D3151008).
Dear Sir,

With ref. to advertisement in Internet, there is a vacancy of above mentioned post, I would like to apply for it.

Presently I have finished my 2 years contract with Bombela Civil Joint Venture Pty Ltd. (Gautrain High speed Rail Link Project) in Johannesburg (South Africa) as a Methods Engineer.

I am looking for a new opportunity, so I would like to apply for the same.

I have done Two years Draughtsman’s Diploma from Government of India (N.C.T.V.T).

I am having more than 25 years Practical working experience on Metal Building System, Petrochemical, OIL & Gas, Chemical, Industrial, Power, Infrastructure, Highways, Bridges, University campus, High rise residential and commercial Buildings.

More than 13 years in Consulting Engineers Firm and 12 Years with multinational Companies. Like U.K., U.S.A, U.A.E. based.

Thorough Knowledge AutoCAD 2007, SDS-2, Cads-RC, Re-bar CAD.
I would welcome an opportunity to embark upon a fruitful career and look forward to meet you and discuss with you as to how I can be asset to your successful team.
Hoping for your positive reply.

Thanking you,

Yours faithfully,

(RAMDAS AWHAD)
Encl. : C.V
CURRICULUM VITAE

NAME : RAMDAS B AWHAD

ADDRESS : Suyog Appartment,
PL6A/7/11, Sector-1,Khanda Colony,
New Panvel, Navi Mumbai-410216.
e-mail-rbawhad@hotmail.com
ramdas_awhad@yahoo.co.in

CONTACT No. : Cell- +91 9221 278 865.

NATIONALITY : INDIAN
DATE OF BIRTH : 1st June 1963.
PASSPORT NO. : E 5893141
DATE OF EXPIRY : 22/07/2013
PLACE OF ISSUE : Thane, Mumbai,
EDUCATIONAL QUALIFICATION : H.S.C. (Science)
TECH. QUALIFICATION : National Diploma in Draughtsman in 1983
With 1st Class.

COMPUTER SKILL Diploma in Computer Aided Design.
AutoCAD 2007, CADS RC,
Rebar –CAD, SDS-2
Microsoft word & Microsoft Excel

WORK EXPERIENCE : 25 Years Practical Experience as a Civil /
Structural Draughtsman, Designer,
Detailer, Checker, Team Leader,
Detailing Manager.
AutoCAD COMPETANCY:

Thorough knowledge of AutoCAD functions, such as X-Refs, Lisp, Blocks, Layers, Model Space & Paper Space, View-ports, Pen Setting files and all AutoCAD utilities.

Good understandings of AutoCAD customization able to load Client specific Standard Menus, settings and make sure all PCs are set-up correctly & uniformly.


Responsibilities:
Preparation of Conceptual Design, detailed Fabrication drawings with M.T.O.
Checking of drawings as per client’s specifications and Design specifications for quality and accuracy.
Supervision and Coordination with CAD team.
Site Inspection as per Structural specifications.
Reporting to a Principal / Senior Engineer.
Define process for quality and accuracy.
Reviewing and monitoring the production of drawings to maintain quality and accuracy.
Document control, archiving and QA processes relevant to project work, ensuring - drawings are issued, and filed in an appropriate manner.
Assisting / guiding junior staff in good detailing practice.
Finding solutions to ACAD problems/bugs and rectifying.
Conversion of ACAD drawings to other formats such as DWF & PDF.
Guiding and motivating the groups towards accomplishment of the set objectives.
Analyzing the client's requirements and providing appropriate solutions.
Establishes time estimates for the project requirements.
Proposes project schedule and staffing requirements, and participates in staffing process, which may include selection of resource for the project.
Provides technical solutions towards successful completion of projects as per the customer's requirements and within time frame.
Ensures optimum usage of manpower and infrastructure.

BOMBELA CIVIL JOINT VENTURE PTY LTD.
(GAUTRAIN PROJECT, JOHANNESBURG, SOUTH AFRICA)
Period: 1st May 2007 to 2nd May 2009.
Designation: METHOD ENGINEER.
Project: GAUTRAIN HIGH SPEED RAILWAY PROJECT.
Responsibilities: Preparation of construction sequence and methods statement
Drawings, preparation of grout work, slopes, earth work & tunnel geological section drawings.
Preparation, Checking Reinforced Concrete Drawings and Bar Bending Schedules of Piers, Pier foundations, Abutments, wing walls, Viaducts, Retaining walls, Culverts, Slabs, Beams, Columns and Stairs.
QUALITY EMPHASIS STEEL SOLUTION PVT LTD, MUMBAI.
Period: August 2006 to April 2007.
Designation: SENIOR CHECKER (U.S.A Project’s).
Project Details:
Client: CALIFORNIA DRAFTING (U.S.A).
1) Manhattan Building. CA. (7 Storey 100 x 100 Meters) Building with Structural Steel framing)
2) Elementary School. CA. (16 Nos. of Ground Floor various sizes, Mixed structure like wooden columns with steel framing and roof truss.)
3) G+3 100 x 40 Meters Car showrooms for B.M.W with structural framing.
Involvement: Checking of Structural steel floor plans, Erection marking plans, sections. Individual element details with cutting length and material take off of Steel Columns, Beams, monorails, E.O.T Cranes, Trusses, Gantry girders, girders, stairs, vertical bracings, horizontal bracings, miscellaneous steel and Decorative Hand rails.
MAXVAL TECHNOLOGIES PVT LTD, BELAPUR, NAVI MUMBAI.
Period: August 2004 to 7Th June 2006.
Designation: DETAILING HEAD / DETAILING MANAGER (U.S.A Project’s).
Responsibilities: Co-ordination with U S based client, Study of contract Drawings, project’s man hours calculation, Raising request for additional information from consulting Engineer’s / Architect’s.
Co-ordination with structural Engineer’s, Leading Team of Detailer, and reporting to Principal Engineer.
Allocation of work, Checking, Detailing of structural steel, Miscellaneous steel, Hand rail, Re-bar, fabrication, Prefabricated Aluminum wall panels, Aluminum doors Structural Glazing and windows system through spandrel and through tube system frame (Extrusions), roof panels, roof profiles, flashing designs.
Project Details:
Client: CENTRIA INTERNATIONAL (U.S.A).
1) Sakhalin Project (Chayvo Onshore Processing Facility), Russia.
Various facility Buildings G + 2 Storey structures with different sizes.
(Structural framing with side, floor and Roof panels)
2) Qalhat LNG project, Oman.
Plant Building (structural framing, trusses at top, roof sheets with side cladding)
3) Dongfeng Bldg.2, China. (Multistory Building with side wall panels)
4) Ras Laffan Common Water Cooling project, Qatar.
Industrial Building (structural framing, trusses at top, roof sheets with side cladding) 5) EPC for North East BAB Phase-1 Development, Al- Dabbiya, Abu Dhabi.
Industrial Building (structural framing, trusses at top, roof sheets with side cladding)
6) New Fire Station, Jefferson Country, Wisconsin.
Decorative wall panels.
7) Tan Jung Jati B Power Project (Unit-1 & 2), Tan Jung, Indonesia.
Plant Building (structural framing, trusses at top, roof sheets with side cladding)
8) Colonial Academy Intermediate Unit, WIND GAP PA.
Structural framing, Decorative wall panels and window systems.
9) Elementary School, Location - Tortola, British VI.
Ground Structure with Trusses at top and roof sheets)
10) Anoncaga (Selas Fluid)- Location - Concon, Chile.
Industrial Building (structural framing, trusses at top, roof sheets with side cladding)
11) New Embassy Bldg., Astana, Kazakhstan.
Decorative wall panels.
12) Zimmer Building #5, Warsaw, Indiana.
Industrial Building (structural framing, trusses at top, roof sheets with side cladding)
13) CILACAP 2 x 300 MW Power Project, Singapore.
Various Transfer Towers Buildings. (G+3)
Magnetic Separator House. (G+3)
Mechanical Sampler House. (G+3)
Sodium Hypo chlorate Plant. (G+3)

R.C.C Structures, Trusses at top with Roof sheets.

Bulldozer Garage. (G)
Circulating Water Pump House. (G)
Coal Crasher Bldg. (G)
Coal Handling Control House.
Compressor House For Ash. (G)
ESP Control and Slurry Pump House. (G)
Oil Contaminated Wastewater Treatment Plant.
Sluice Pump House.
Sump Pump House.
(Structural framing, trusses at top, roof sheets with side cladding)
Involvement: Detailing, Checking of Structural steel frames, Preparing General arrangement, fabrication drawings with Cutting Lengths, material take off of Beams, Columns, vertical Bracings, Horizontal Bracings, wall panels, Roof panels, Fasteners, Silicon and Sealants.
AHMADIAH CONTRACTING AND TRADING CO. KUWAIT.
Period: 10th. May 2004 to 12th August 2004.
Designation: SR. STRUCTURAL DRAUGHTSMAN.
Projects: INFRASTRUCTURE PROJECT, KUWAIT.
Proposed Township project in Kuwait with various Residential and Commercial High-rise buildings, G+3, G+5 Storey, Residential Villa's, Mosque's, Roads, under ground water Tanks, reservoirs, overhead water tanks and all service lines.
Involvement: Detailing of Reinforced Concrete drawing and Preparing Bar Bending Schedule of Piles, Pile Caps, Raft Foundations, Spread footings, Columns, Beams, Slabs, Staircases, under ground and overhead water tanks.
INTERNATIONAL DRAUGHTING AND DETAILING PVT. LTD. (U.S. REBAR INC., U.S.A.
Period: 11th. August 2003 to 8th May 2004
Designation: Sr. RE-BAR DETAILER / Sr. RE-BAR CHECKER.
Project: Residential Apartments G+20 with R.C structure (100 X 50 Meters), various sizes of Bungalow’s, Villa's and ground floor School Buildings Structures.
Client: U.S Re-Bar, Harris Re-Bar, U.S.A
Involvement: Detailing, Checking of Reinforced Concrete drawing and Preparing Bar Bending Schedule of Piles, Pile Caps, Raft Foundations, Spread footings, Continuous footing, simple footings, Slab on Grade, Grade Slabs, Columns, Beams, Flat Slabs, Staircases, Lift Shafts as per American Code ACI, ASTM on Re-bar CAD Software.

FRISCHMANN PRABHU (I) PVT. LTD. (PELL FRISCHMANN GROUP U.K.).
Period: 1st April 2002 to 10th. August 2003
Designation: Sr. REBAR CHECKER.
Responsibilities: Preparation of Reinforced Concrete Drawings on CADS-RC Software. Preparation of Reinforced Concrete Pre-cast structures Drawings on CADS-RC and Checking of Reinforced Concrete Detailed Drawings and Bar bending schedule as per BS 4466 and BS 8666.
Poject: CHANNEL TUNNEL RAIL LINK.
ST. PAN-CRASS STATION BUILDING (R.C Structure), LONDON.
Client: ARUP.
Involvement: Checking of Reinforced Concrete drawing and Bar Bending Schedule of Capping Beams, Columns, Raft slabs, retaining walls, Staircases, Slabs, Beams. Pre cast slab & beams.
Project: MORE LONDON (R.C Structure), U.K
Client: ARUP.
Involvement: Checking of Reinforced Concrete drawing and Bar Bending Schedule of Raft foundation, footings, Beams, Columns, Slabs, Staircases and Retaining walls.
Project: JAMAIKA HIGHWAY INFRASTRUCTURE, WEST INDIES.
Client: BOYGUES TRAVAUX PUBLICS.
Involvement: Checking of Reinforced Concrete drawing, general arrangement drawings and Bar Bending Schedule of Pier foundations, Piers, footings, Abutments, Wing walls, Bridges, Stairs and Culverts.
Project: SALAMANKA STREET, LONDON.
(Ground + 16 Storey Building, R.C Structure)
Client: Laing O’Rourke
Involvement: Checking of Reinforced Concrete drawing and Bar Bending Schedule of Pre cast Columns and pre cast Tendons.
TIGER STEEL INDIA PVT. LTD, MUMBAI (TIGER GROUP SHARJAH)
Period: February 1997 to March 30, 2002
Designation: SENIOR STRUCTURAL DRAUGHTSMAN
Responsibilities: Preparation, Checking Fabrication, Erection and General Arrangement Drawings, Taking bill of quantities of Accessories like roofing sheets, gutters, Flashings, Closures, Fasteners, Sealants, Bolts Etc.
Project: EXTENSION OF DUBAI AIRPORT, DUBAI, U.A.E.
Involvement: Detailing of Structural steel frames, Preparing General arrangement, fabrication and Erection drawings with material take off of Beams, Columns, vertical Bracings, Horizontal Bracings, Roof Trusses, wall panels Roof panels, Gutters, Flashings, pipes, Fasteners and Sealants.
Project: AJMAN CITY CENTRE, AJMAN, U.A.E
Involvement: Detailing of Structural steel frames, fabrication drawings and material take off of Beams, Columns, Rafters, vertical Bracings Horizontal Bracings, Roof Trusses and Roof panels, Gutters, Flashings, pipes, Fasteners and Sealants.
Project: Various sizes and Heights of warehouses, factory Buildings, Amusement parks and Cafeteria Building.
Structural frames, Steel Stairs with Mezzanine and first floor (using Sandwich Panels), Rafters, Z - purlins, Bracing Rods at roof with roof sheet on top and side cladding.
Involvement: Detailing and Checking of R.C. Foundations, Steel Stairs, Columns, Beams, Rafters, Cladding Runners, Vertical and Horizontal Bracings.
Material take off, Cutting list of all above listed items with fasteners, Sealants, Skylights, side and roof panels.
Project: various sizes of cantilever fuel stations (canopies).
For Bharat Petroleum Corp. Ltd and Indian Oil Corp. Ltd, India.
Involvement: Detailing, Checking of Rectangular hollow Columns, Beams, Strut Beams, Fascia Truss all around, Soffit panels and roof panels, Gutters, Flashings, Pipes, Fasteners and Sealants.
AL NABOODAH-LAING, DUBAI, U.A.E., (JOHN LAING PLC.U.K).
Period: January 1996 to January 1997.
Designation: CAD DESIGNER.
Responsibilities: Preparation of Shop R.C. Drawing on AutoCAD and Preparation of bar bending schedule as per BS 4466.
Project: TWIN TOWER, DUBAI.
(R.C.C Structure 200 Meters X 100 Mts, 2 Basement's + Ground + 4 + Two 25 Storey Residential and commercial Tower)
Involvement: Detailing of Reinforced Concrete drawing and Preparing Bar Bending Schedule of Piles, Pile Caps, Raft Foundations, Spread footings, Columns, Beams, Slabs, Pre cast Staircases and Pre cast wall panels.
Project: ADMINISTRATION BUILDING, ABU DHABI.
G + 18 Storey Tower, R.C. Structure.
Client: ADCO, ABUDHABI.
Involvement: Detailing of Reinforced Concrete drawing and Preparing Bar Bending Schedule of Piles, Pile Caps, Raft Foundations, Spread footings, Columns, Beams, Slabs, Pre cast Staircases and Pre cast wall panels.
AL MAKTAB AL ASRI ENGINEERING CONSULTANT’S.
Architect’s & Civil / Structural consultant’s, Abu Dhabi, U.A.E.
Period: December 1993 to December 1995.
Designation: SENIOR STRUCTURAL DRAUGHTSMAN.
Responsibilities: Detailing of Reinforcement Concrete, Structural Steel, Architectural, Presentation, Submission Drawings, Submission to Abu Dhabi Municipality, Khalifa Committee and Site Supervision.
Project: Various Residential & Commercial Multistory Towers.
16,18, and 22 Storey of 100 X 80 Meters, 80 Meters X 80 Meters R.C. Structures.
Location: Abu Dhabi, U.A.E.
Project: Various Residential & Commercial Buildings.
Ground + 8 Storey of 50 Meters X 50 Meters R.C. Structures.
Location: Abu Dhabi, U.A.E.
Project: Various sizes of Residential Buildings, Villa's.
2, 3 and 5 Storey R.C. Structures.
Location: Abu Dhabi & Al AIN, U.A.E.
Project: Various sizes of Mosque's.
Ground + 2 Storey R.C. Structures.
Location: Abu Dhabi & Al AIN, U.A.E.
Job involvement: Preparation and checking of floor plans.
Individual element details of Reinforced Concrete Footings, Equipment Foundation, Raft Foundation, Raft slabs, Columns, Beams, Slabs, Flat slabs, Deck Slabs, Lift Shafts, Retaining Walls, walls, Staircases, under ground water tanks, overhead water tanks.
PARIKH AND ASSOCIATES.
Civil And Structural Engineering Cosultant’s. Mumbai, India.
Period: September 1983 to December 1993.
Designation: SENIOR STRUCTURAL DRAUGHTSMAN.
Job involvement: Preparation and checking of floor plans.
Individual element details of Reinforced Concrete Footings, Equipment Foundation, Raft Foundation, Raft slabs, Columns, Beams, Slabs, Flat slabs, Deck Slabs, Lift Shafts, Retaining Walls, walls, Staircases, under ground water tanks, overhead water tanks.
Preparation and checking of Structural steel floor plans, Erection marking plans, sections. Individual element details with cutting length and material take off of Steel Columns, Beams, monorails, E.O.T Cranes, Trusses, Gantry girders, girders, stairs, Pipe Racks, vertical bracings, horizontal bracings, grating and checkered plate platforms.

Project’s Details:
1) A-R & B. R. PLANT @ Iraq for M /s. SEIDACC (MAFRON GAS).
Various facilities Buildings of Reinforced Concrete and structural framing up to G+3 Storey containing Monorails, steel stairs, grating and checkered plates floors,
Equipment foundations, structural steel Truss and wall cladding.
Pipe Racks, Supports, R. C. tank farms.
2) THISOL PLANT @ Thane Belapur Road, Mumbai for
M /s. POLYOLEFINS INDUSTRIES LIMITED (Rubber Chemicals Division).
G+3 Steel Structure with Equipment foundations and E.O.T Crain, steel Truss and
Wall cladding.
3) INCINERATOR PLANT @ Thane Belapur Road, Mumbai for
M /s. POLYOLEFINS INDUSTRIES LIMITED (Rubber Chemicals Division).
40 Meters high open structures consist of structural framing with various equipment foundations, gratings on upper floors.
4) ANTIOXIDATION PLANT @ Thane Belapur Road, Mumbai for
M /s. POLYOLEFINS INDUSTRIES LIMITED (Rubber Chemicals Division).
G+3 Steel Structure with Equipment foundations and E.O.T Crain, structural steel Truss and wall cladding.
5) MILLIPALET PLANT @ Thane Belapur Road, Mumbai for
M /s. POLYOLEFINS INDUSTRIES LIMITED (Rubber Chemicals Division).
G+3 R.C Structure with Equipment foundations and E.O.T Crain, structural steel Truss.
6) PIPE RACK AND TANK FARMS @ Thane Belapur Road, Mumbai for
M /s. POLYOLEFINS INDUSTRIES LIMITED (Rubber Chemicals Division).
Various Pipe Racks with Structural framing and individual footing Supports.
Various R.C. Tanks of different sizes and heights with circular continuous footing.
7) HALON PLANT @ BARODA, GUJARAT, INDIA for
M/s. MAFATLAL GROUP.
Various facilities Buildings with Administration Building of Reinforced Concrete and Steel structural framing up to G+3 Storey contain E.O.T Cranes, steel stairs, grating and checkered plates floors, Equipment foundations, Structural Steel truss and wall Cladding.
Pipe Racks, Supports, R. C. tank farms.
8) GUJARAT GAS PLANT @ BHARUCH, GUJARAT, INDIA, for
M/s. GUJARAT GAS CO. LTD.
Various facilities Buildings with Administration Building of Reinforced Concrete and Steel structural framing up to G+3 Storey contain E.O.T Cranes, steel stairs, grating and checkered plates floors, Equipment foundations, Structural Steel truss and wall Cladding.
Pipe Racks, Supports, R. C. tank farms.
9) LAFFANS PETRO CHEMICALS LTD @ BARODA, GUJARAT, INDIA.
Various facilities Buildings with Administration Building of Reinforced Concrete and Steel structural framing up to G+3 Storey contain E.O.T Cranes, steel stairs, grating and checkered plates floors, Equipment foundations, Structural Steel truss and wall Cladding.
Pipe Racks, Supports, R. C. tank farms.

10) LAFFANS PETRO CHEMICALS LTD @ LOTE PARSHURAM,
MAHARASTRA, INDIA.
Various facilities Buildings with Administration Building of Reinforced Concrete and Steel structural framing up to G+3 Storey contain E.O.T Cranes, steel stairs, grating and checkered plates floors, Equipment foundations, Structural Steel truss and wall Cladding.
Pipe Racks, Supports, R. C. tank farms.
11) RELAENCE PETROCHEMICALS LTD @ JAMNAGAR, GUJARAT, INDIA.
Various facilities Buildings with Administration Building of Reinforced Concrete and Steel structural framing up to G+5 Storey contain E.O.T Cranes, steel stairs, grating and checkered plates floors, Equipment foundations, Structural Steel truss and wall Cladding.
Pipe Racks, Supports, R. C. tank farms.
12) KALPTARU HABITAT, MUMBAI, INDIA.
Basement + G + 22 Storeys around 80 X 50 Meters Reinforced Concrete.
Residential building.
13) MANIPAL UNIVERCITY CAMPUS @ MANIPAL, INDIA.
Various facilities buildings of different sizes up to G + 7 storey’s Reinforced Concrete.
Various residential and commercial buildings of different sizes up to G + 12 storey’s Reinforced Concrete.

Expected Salary: Negotiable.

Joining Date: First week of June 2009.

Current Location: Mumbai, India.

Reference Details: Royce Tosen (Deputy Manager)
Bombela Civil Joint Venture Pty Ltd.
Geotechnical Dept., Gautrain Project,
Jonesburg, South Africa.
Cell No. 083 627 9732
Office Ph- (011) 997 8379

Mukesh Pritamdasani.(Director-Ramboll Whitybird Pvt.
Ltd., Mumbai, INDIA)
Former Sr. Design Manager (Parikh & Associates, Mumbai)
e-mail-mukesh.pritamdasani@rambollwhitbybird.com.
Contact Nos. 0091-9820185879,009122-26432577.

[Guest]

Resume for Mechanical Engineer (Engineering & Project)

AJIT MADHUKAR RAWOOL
E-Mail :ajit_rawool83 AT rediffmail.com / ajit.rawool AT yahoo.co.in
Seeking assignments in Maintenance Operations, Project Planning & Execution, Operations Management,
- A result oriented professional with proven abilities in enhancing production process operations, optimising resource and capacity utilisation, escalating productivity and operational efficiencies. Significant experience & expertise in planning & execution of projects for set up, expansion, modernization and installation / commissioning of equipments.
- Presently looking after the Project Implementation & Maintenance activities of the Plant / Utilities & Documentation as per CGMP Norms
AREAS OF EXPERIENCE
Project Planning & Management
- Evaluation of project, present cost / benefits analysis at project decision points.
- Finalization of requirements and specifications in consultation with collaborators / promoters as well as project scheduling including material & manpower planning.
- Interact with external agencies, clients & consultants for determining technical specifications, approvals for execution & obtaining on-time clearances.
- Execution of projects for plant set up, expansion, modernization, installation & commissioning.
Maintenance Operations
- Managing the functions of preventive/breakdown maintenance of mechanical, hydraulic & pneumatic machines, utilities to reduce downtime to minimum.
- Conduct regular inspections to prevent accidents and adhere to safety norms.
Procurement / Supplier Development
- Procurement of spares, generating the indents for material requirements and codification with the material requirements for stock of spares.
- To monitor & ensure continues supply of DM/Purified Water , steam, power, HVAC, Compressed air & maintenance of same
- Co ordination with the supplier for timely completion of the project.
Operations Management
- Preparation of documentation, Protocol and records as prescribed by MHRA / MCC, USFDA Guide.
- Energy conservation, controlling the cost through innovative approach.
- OSD Facility : Oral solid doses, – Responsible for smooth functioning & maintenance of all process equipments like FBD, Auto Coater, Compression Machines, Capsule Filling Machines & Blister Pack Machines.
- Sterile area & injection plant : responsible for, maintenance of sterile area, all processing equipment, pure steam generator, WFI Plant, laminar air flow, vial washing filling & sealing line & maintenance of HVAC area as per class 100000 & 1000 area standard.
- Implementation of breakdown maintenance.
Production Operations
- Developing preventive maintenance schedules & its implementation, arranging for resources to ensure achievement of organisational targets as per budgeted parameters.
- Mentoring subordinates and ensuring amicable employee relations on the shop floor.
WORK EXPERIENCE
Dec 2009 – till date with Micro labs Ltd Goa as Executive – Engineering :
A leading Pharmaceutical company & the facilities is approved by the USFDA, MHRA, TGA, WHO GMP, TEVA.
Notable Accomplishments :
- Project Implementation & Coordination with all agencies for Timely completion of the Expansion project (Naproxen) in the Existing facility.
- Project execution, Utility, Installation & Commissioning of process / Utility Equipment
- Responsible for preparation of engineering documents (DQ, IQ, OQ & PQ of HVAC, water & process equipments), Annual PPM, Calibration Planner / schedule, Job work orders, safety permits etc.
- Equipment installation, Testing, commissioning, validation & maintenance.
- Preventive maintenance of utility & process equipments to reduce the downtime of machinery.
- Responsible for utility services & overall Pharma machinery maintenance, maintenance of HVAC system HVAC system on higher & lower side & building facilities.
May 2009 - Dec 2009 with Indoco Remedies ltd as Executive – Engineering :
A leading Pharmaceutical company & the facilities is approved by the USFDA, MHRA, WHO GMP.
Notable Accomplishments :
- Project Implementation & Coordination with all agencies for Timely completion of the Expansion project (Capamatic filling machine) in the Existing facility.
- Responsible for preparation of engineering documents (DQ, IQ, OQ & PQ of HVAC, water & process equipments), Sop’s, Annual PPM, Calibration Planner / schedule, Job work orders, safety permits etc.
- Equipment installation, Testing, commissioning, validation & maintenance.
- Preventive maintenance of utility & process equipments to reduce the downtime of machinery.
June 2007 – April 2009 with Glenmark Pharma Ltd. As officer Engineering & Project.
A leading Pharmaceutical company & the facilities is approved by the USFDA, MHRA, TGA, WHO GMP.
Notable Accomplishments
- Project Implementation & Coordination with all agencies for Timely completion of the new Hormone Plant project
- Expansion of the Granulation project and utility expansion.
- Project execution, Utility, Installation & Commissioning of process / Utility Equipment
- Responsible for preparation of engineering documents (DQ, IQ, OQ & PQ of HVAC, water & process equipments), Annual PPM, Calibration Planner / schedule, Job work orders, safety permits etc.
- Equipment installation, Testing, commissioning, validation & maintenance.
- Preventive maintenance of utility & process equipments to reduce the downtime of machinery.
- Responsible for utility services & overall Pharma machinery maintenance, maintenance of HVAC system HVAC system on higher & lower side & building facilities.
Aug 2002 – June 2007 with Medispray Lab Pvt. Ltd. (Group of Cipla Ltd.) as Maintenance Engineer
A leading Pharmaceutical company & the facilities is approved by the USFDA, MHRA, TGA, WHO GMP, Brazil.
Notable Accomplishments
- Project Implementation & Coordination with all agencies for Timely completion of the Expansion project (QC expansion, Aerosol filling line expansion, packing line modification, stores expansion) in the Existing facility.
- Project execution, Utility, Installation & Commissioning of process / Utility Equipment
- Responsible for preparation of engineering documents (DQ, IQ, OQ & PQ of HVAC, & process equipments), Annual PPM, Calibration Planner / schedule, Job work orders, safety permits etc.
- Equipment installation, Testing, commissioning, validation & maintenance.
- Preventive maintenance of utility & process equipments to reduce the downtime of machinery.
- Responsible for utility services & overall Pharma machinery maintenance, maintenance of HVAC system HVAC system on higher & lower side & building facilities.
KNOWLEDGE PURVIEW
- HVAC SYSTEM : Installation, commissioning of AHU/Dehumidifier, Cooling tower,Chilling plant, Implementation of validation protocol, preparation of DQ, IQ, OQ and PQ documentation. Clean room MAINTAINANCE
- WATER SYSTEM : Installation, commissioning of Purified water plants, Preparation of validation protocol & maintenance & smooth functioning of RO -EDI/DM/PW SYSTEM: providing purified water for pharma applications which meets cGMP requirements.
- Meeting the treated water standard in as prescribed by GPCB
- Co ordinatingwith related techno commercial function area (Stores, Purchase, material procurement, & projects)
- Maintaining all Engineering Documentation as per MHRA standards.
- Conducting preventive maintenance on all utility equipments like Steam IBR Boiler, Vapour Absorption Chillers, Screw Chillers, Air Compressors, DG set.
- Conducting preventive maintenance on all process equipments (Granulation, Compression, Coating, Packing) like FBD, Compression Machines, Coating Pans & Blister Pack Machines.
- Conducting preventive maintenance on all Aerosol plant equipments (filling, Packing) like filling line, cfc – non cfc mixing vessels, diaphragm pumps, homogeniser, & checkweigher, cartonator, wrapping / shrink wrapping machines, labelling machine, sealing machine, strapping machine etc.
- Conducting preventive maintenance on all sterile & injectable plant equipments (filling, Sealing, Packing) like vial & ampoule washing filling & sealing line , mixing vessels, & inspection machines, cartonator, wrapping / shrink wrapping machines, labelling machine, sealing machine, strapping machine, conveyors etc.
- Validation and commissioning of all process equipments, preparation and implementation of DQ/IQ/OQ/PQ protocols.
- Preparation and implementation of Area Qualification protocols.
- Preparation and implementation of Sop’s, Annual PPM planner & schedule, calibration planner & schedule.
- Directing the technician and sub contractor in tracking breakdown, and taking necessary corrective actions.
EDUCATION PREVIEW
- Diploma in Mechanical Engineering with 1st class
- MS CIT Computer Course with 1st class