Maintenance Engineer Gujarat : Everest Kanto Cylinder Ltd

[krishni84]

GUJARAT

VP- Operations (001/HR/08/G) : Gandhidham
The incumbent will have overall responsibility of all plants for the operations, production, plant/process Engg, quality, customer care, local procurement, commercial and administrative performance.

Qualificaiton & Experience :
BE Mech with more than 25 years experience and currently holding GM/VP position of a large company or multiple plants of manufacturing heavy duty forgings, seamless steel tubes or auto machined & press parts/heat-treated /painted components.

General Manager (004/HR/08/G): Gandhidham
The incumbent will have responsibility of plants’ Production, Maintenance, Stores, Despatch, and exposure to commercial, personnel and administrative activities.

Qualification & Experience:
BE Mech with minimum 20 years experience and currently holding a Senior/Plant-Head position in a mid size mass-production manufacturing units of heavy duty forgings, seamless tubes or auto-machined/ press-parts/heat-treated/painted components.

About Us:
Everest Kanto Cylinder Limited, India. Established in 1978, EKC has grown to become pioneer in development & production of industrial & CNG Cylinders with well over 1.5 million High Pressure gas cylinders and 5.00,000 CNG cylinders in service and three manufacturing plants in India Aurangabad, Tarapur and Gandhidam and Middle East (UAE) JAFZA in Dubai. Thanks to a long history in business and adherence to the highest quality standards, EKC enjoys market leadership in the domestic and favorable position in international markets.

Contact Us:
Everest Kanto Cylinder Ltd.
204 Raheja Centre, Nariman Point,
Mumbai 400021
E-Mail :careers@ekc.in
Website:http://www.everestkanto.com

[Guest-IJT]

Name : DHARMENDRA
Email : dharmjp AT gmail.com
Designation / Skillset : engineer

Resume :

- BE (Mechanical) with 2 years experience and have knowledge in Preventive &Breakdown maintenance of Heavy duty hydraulic machines and Utilities Systems. Having experience in reading and troubleshooting in Mechanical assemblies, Hydraulic and Pneumatic circuits, capable of doing break down analysis & carry out suitable corrective and preventive action.
- Currently associated with WelspunCorp.Ltd (Plate & Coil Mill), Anjar (Gujarat) Worked as a Project Engineer, now working as Finishing Line Maintenance Engineer. Welspun is first in India to install 4500 mm width Plate and Coil Mill.
- Proficiency in managing maintenance of various equipments for reducing downtime and enhancing operational effectiveness of equipment.
- Adept in managing erection & commissioning activities involving resource planning, in-process inspection, team building and co-ordination with Internal / External Departments.
- Honed skills in working on initiatives for reduction in costs by minimising equipment breakdown and improving productivity by technology management.
- An effective communicator with excellent skills in building relationships. Possess strong analytical, problem solving and organisational abilities.
Operations & Maintenance
- Planning and effecting preventive maintenance schedules of various machinery and instruments to increase machine up time / equipment reliability; thereby accomplishing planned production targets within budget.
- Proactively identifying areas of obstruction / breakdowns and taking steps to rectify the equipments through application of trouble shooting tools.
- Scheduling, planning and execution of Maintenance and servicing of all the Finishing Line machines and the inspection of their various parts.
Erection & Commissioning
- Installation and commissioning of the heavy duty machineries as well as inspections to ensure operational effectiveness of plant & utilities..
- Reviewing engineering drawings, layouts, diagrams, technical specifications and cost estimates for erection & commission.
Team Management
- Leading, mentoring & monitoring the performance of the team members to ensure efficiency in process operations and meeting of individual & group targets.
- Creating and sustaining a dynamic environment that fosters development opportunities and motivates high performance amongst Team members.
- Presently working as In-charge of Finishing Line.
Since Sep-09 WelspunCorp Ltd (Plate and Coil Mill Division), Anjar
Key Deliverables
AS PROJECT ENGINEER
- Successful erection, alignment & installation of Edge Milling Machine (LINSINGER) Austria
- Complete responsibility during erection of Saw Cutting Machine (LINSINGER) Austria
- To study & analyze the drawings of Divide Shear, Edge Milling Machine, UT machine, Saw Cutting Machine, Centering Device, online Weigh Bridge, and Plate Marking Machine.
- Erection & Installation of Rocking shear (TECHNOGIDUE, Italy).
- Completely involved with the team during erection of UT Machine (GE Inspections technology )Germany
- Erection & Installation of NUMTEC INTERSTAHL Marking m/c
- Erection & installation of Hot & Cold plate marking M/c NUMTEC INTERSTAHL (Austria)
- Making job orders, Estimating, Procurement of materials & Documentation.
- Completed erection, commissioning & now Maintenance of ROTARY TRIMER & CHOPER Galbiati Group (Italy)
- Erection & Installation of Hydraulic Rocking shear working at 320bar. (TECHNOGIDUE, Italy).
- Handling routine Mechanical and Civil activities.
- Currently working for project work of COLD LEVELER.
AS MAINTENANCE ENGINEER
- Leading a team responsible for all the m/c in finishing line, inspecting Troubleshooting and Maintenance.
- Maintenance of EDGE MILLING, SAW CUTTER, DIVIDE SHEAR, HYDRAULIC SHEAR, ROTARY TRIMMER & CHOPPER, MARKING M/C, UT M/C, ROLLER TABLE,COOLING BED, CTL,
- Maintain the schedule of servicing for all m/c under my supervision.
- Maintain the inventory of spares.
- Maintain History card for all Machine & it spare parts.
- Have knowledge of Hydraulics.
- Planning man & time for breakdown & shut down activity.
- Analysis to overcome from frequent failure of equipment.
- To make a well oriented work schedule with available resources.
Notable Attainment
- Responsible for raising the indents and following up with the vendors for material.
- Make the machines run with maximum efficiency and get the maximum utilization.
- Maintain all the documents for ISO :9001,14001 & 18001
- Planning and scheduling of man and machines.
- Maintaining House keeping At 5S.
BE in Mechanical Engineering from NAGPUR UNIVERSITY , Nagpur, in 2009 with first class.
MBA in OPERATION from IGNOU
- Basic knowledge of computers.
- MS Office,
- MS Project
Current CTC : 3 Lac
Expected CTC : 4.5 Lac Negotiable
I don’t have problem to relocate to anywhere in the word.
Current Location ANJAR GUJARAT
Notice Period 20-30days
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4166974
Date & Time : 24th May 2011 6:01 AM (UTC)
IP Address : 117.98.41.169
Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
Predicted Country : India

[GOHIL SHAILENDRASINH]

RESUME
GOHIL SHAILENDRASINH .C
E-MAIL :gohilshailendra1390 AT gmail.com
ACADAMIC RECORD :-

EXAMINATION
PASSED BOARD YEAR PERCENTAGE
S.S.C G.S.E.B 2006 79.14

DIPLOMA : - MECHANICAL ENGINEERING
COLLEGE : SIGMA INSTITUTE OF TECHNOLOGY & ENGINEERING
DIPLOMA IN MECHANICAL
SR
NO YEAR SEMESTER MONTH
&YEAR INDIVIZUAL
PERCENTAGE AVERAGE PERCENTAGE CLASS
1
F.Y. FIRST NOV-2008 6.70
SECOND APR-2009 5.65
2
S.Y. FIRST NOV-2009 6.27 6.71 FIRST
CLASS
SECOND APR-2010 7.40
3
T.Y. FIRST NOV-2010 7.50 - -
SECOND APR-2011 RESULT PENDING

Comprehensive problem solving abilities, excellent verbal and written communication skills, ability to deal with people diplomatically, willingness to learn team facilitator hard worker.
- Proficiency in MS OFFICE, AUTOCAD
I have done below project with presentation also
1) BEARING, in 5th semester
- PRINCIPLE OF OPERATION
- PLAY
- TYPES
- MAINTENANCE
2) BIO GAS PLANT, in 6th semester
- PRINCIPLE
- WORKING
- MAINTENANCE

[Guest]

MUKESH KURIYA*
* mmkuriya AT gmail.com * < mmkuriya AT gmail.com >

*OBJECTIVES*
A professionally challenging and rewarding career in the field of
Electrical Engineering that allows me to utilize my knowledge and
creativity to further growth of my career and my personal self.
*EDUCATIONAL QUALIFICATION*
*Qualification* *Board/university**institution* *Year of completed* *
Marks(%)* *S.S.C.* *G.S.E.B.* *Bhimora high school,chotila* *March-2008* *
75.23* *Diploma(mechanical) sem-1**G.T.U.* *GOVT Polytechnic chhota Udepur*
*Dec-2008* *63.70* *Diploma(mechanical)sem-2*
*G.T.U.* *GOV-Polytechnic chhota Udepur**May-2009* *55.20*
*Diploma(mechanical) sem-3* G.T.U. *GOVT Polytechnic chhota Udepur* Dec-2009
70.30
*Diploma(mechanical) sem-4* G.T.U. *GOVT Polytechnic chhota Udepur* May-2010
73.04 *Diploma(mechanical) sem-5* G.T.U.*GOVT Polytechnic chhota Udepur*
Dec-2010 75.78 *Diploma(mechanical) sem-6* G.T.U. *GOVT Polytechnic chhota
Udepur* May-2011 80.70
*
PROFESSONAL QUALIFICATION *
*DIPLOMA IN MECHANICAL*
*Gujarat Technological University Ahemdabad Gujarat*
*Institution : Government Polytechnic Chhota Udepur *
*AGGREGATE PERCENTAGE : 71.80%**
**EXPERIENCE *
I have Six months experience in casting.Production & Q.C.
*COMPUTER SKILLS*
- MS Office, Software Skill
*TECHNICAL SKILLS*
- Electrical, PP (Power Plant).
*INTEREST AND HOBBIES*
- Interacting with people & travelling & writing
Diary *COMPETENCIES*
Communication & Presentation skills, Commitment to any work assigned,
Ability to perform in any stress related situation, Creativity,
Adaptability.

Gujarati *CERTIFICATION*
I declare that the above information is true and correct to the best
of my knowledge and nothing has been concealed or
distorted.
Yours Sincerely,
(MUKESH)