Safety Engineer Mumbai : Dolphin Offshore Enterprises India Ltd

[krishni84]

Deputy Manager./ Assistant. Manager

FUNCTION HSE

AGE 30 - 40 Years

EXPERIENCE Minimum 7- 9 years experience in Safety Management
QUALIFICATION Degree/diploma in Engineering preferably in Mechanical/Structural

DESIRED SKILLS Indepth knowledge in Safety and Quality
Preferably ISO qualified Offshore Experience

About Us:
DOLPHIN OFFSHORE ENTERPRISES INDIA LTD. was incorporated on May 17, 1979 as a Pvt. Ltd company. The first chairman of the company was Mr Shavax A Lal, ex-Secretary to the first Indian Governor General, Shri C.Rajagopalachari, and a prominent Mumbai businessman. The Managing Director at that time was Rear Admiral Kirpal Singh, a war veteran, with a distinguished record in the Indian Navy. The two shared a vision of building national capacity for the nascent offshore oil industry by providing diving, underwater engineering and allied services for the new projects in Bombay High. To this end, the Company formed an association with Taylor Diving & Salvage Company Inc, a subsidiary of the US-based Halliburton Group and commenced diving operations the same year. Through this association, DOEIL became the first Indian company to acquire the technology for all aspects of offshore diving and, underwater engineering.

Contact Us:
DOLPHIN OFFSHORE ENTERPRISES INDIA LTD.
LIC Building Plot No. 54
Sector 11 | CBD Belapur (East)
Navi Mumbai | 400 614
Tel. : +91 22 - 6602 6602
Fax : +91 22 - 6602 6603
Employment opportunities : hr@dolphinoffshore.com
Website :http://www.dolphinoffshore.com

[Guest-IJT]

CURRICULUM VITAE

PRASHANT GARJE
29B, High Street, Uttoxeter,
Staffordshire, Post code ST14 7HN
England, UK.

Present Address
4, Shrinivas Apts,
Shreeram Soc, Plot Num 7,
Sr Num 126, Warje, Pune 411052
Phone- 0091- 20-25231634, Mobile: +91-9689135207
E-mail : prashantgarje AT gmail.com

OBJECTIVE:

To associate with an organization which progresses dynamically and gives me a chance to update my knowledge and enhance my skills in the state of the new technologies.

EDUCATION QUALIFICATION:

Diploma in Mechanical Engineering from Board of Technical Engineering & Education (Govt. of Maharashtra).

SOFTWARE KNOWLEDGE:

MODELING PACKAGES:

Unigraphics
Modelling Modules: Presently working on Unigraphics Version NX4

Solid Modelling : Master model concept
Drafting : Associated drawing in Team Centre environment
Sketches: Simplified sketches to modify models.
Assemblies : Top up and bottom down
Surface Modelling: Creating surfaces using Sketches, Basic Curves & Splines.

Team Center & PLM : Knowledge of Team Center, G-Link & PLM for release of drawings and part list.

PROFESSIONAL SUMMARY & JOB PROFILE:

Bharat Forge Ltd. (Aug 1994 – Sept 2004)
. CAD/CAM Dept Pune.
Designation: Asst.Manager

Involved in Designing, modelling & drafting of automotive components like Crank shaft, Front Axle beam of Ford, Mercedes Benz & Connecting rod, Steering Knuckle, Cam shaft of Bajaj Auto, Mahindra & Mahindra, Simpson, Ashok Leyland. Using Unigraphics.

Onward Technologies Ltd. (Sept 2004 – June 2006 )
Manufacturing Software
Solution Division Pune.
Designation: Asst.Manager.
Involved in Designing, Modelling, Assembly & Detailing of automotive components from all over global clients of Onward, preparing checklists & quality checks as per customers feedback and giving error free delivery of projects Using Unigraphics.

Onward Technologies Ltd., UK (June 2006 – Till date )
England.

Working for JCB Heavy Products UK (onsite) in Design and Engineering Dept for Past 3 years.

Well conversant with English Ascent, Job profile includes design, modelling, assembly, detailing of Excavator machines , preparing Part Lists & releasing drawings, part lists in Team Center & communicating with vendors for product design & manufacture, Co-ordination within Organisation for product development & follow up. Participated in Competitors Tear down event to achieve & study market position, Developed skills among team members to achieve quality output, Successfully completed Lean Management training Organised in UK JCB Heavy Products Factory, Successfully delivered & involved in Development of a new 8 Ton Excavator JZ80, Worked on JZ140, JZ235, JS200, JS330, JS360 in almost all areas including Hydraulics, Electrics, Bodyworks, Frame, Sheet metal, Booms, Arms, Traction Equipment, Bucket Options, Dozer Options, Successfully resolved Service related issues, Hydraulic Options, Combination Masters, Under carriages, NC, LC, Decals, EU, UK, US & Rest of the world Machines, Specialised on working on Zero Tail swing machines & Tracked + Wheeled excavators. Participated & successfully completed Cost Reduction Projects.


PERSONNEL PROFILE:

Date of Birth : 07-07-1972
Gender : Male
Marital Status : Married
Nationality : Indian
Languages known : English, Hindi, Marathi
Permanent Address : 4, Shrinivas Apts, Shriram Soc, Warje,
Pune 411052, Maharashtra, India.

Date:

( PRASHANT GARJE )

**********

[Guest]

CURRICULUM VITAE
GANESH BERDE
EDUCATIONAL QUALIFICATION
- 12th PASSED

EXPERIENCE
2010 TO 2011 M/s. PIPAVAV SHIPPYARD Pvt.Ltd. -SUPERVISOR
2008 TO 2010 M/s. MATHEW ASSOCIATES HOOK – UP & WELD SERVICE – STORE
2007 TO 2008 M/s. CONSTANT ENGINEERING Pvt. Ltd. - STORE

2005 TO 2006 M/s. GANON DUNKERLEY & Co. Ltd.( Sub- contractor for RIL)
- STORE
1990 TO 2005 M/s. B.J CORIER SERVICES - MANAGER
OCCUPATIONAL CONTOUR
Product Support
- Proficient in Handling of Store.
- Proficient in Managing Stocks & Preparing Related Documents.
Achievement :
- Good experience in team work and have good leading capacity.
- Good experience to assistant for investigate selected accidents.
- Good experience to control quality and cost of the job.
SPECIAL EXPERTISE

- Ms office, windows 98,

[Guest]

dear sr
i request you piles any offshore vacancy can you give me , i am Rigger 12 year working India,and gulf plies tack care my jobs Rigger.
Anil kumar prasad
siwan Bihar
india

[Guest]

Dear Sir,
I had seen your company advertisement for the post of Safety Engineer for mumbai location. I am very much interesting to work in offshore field presently i am working in HPCL mahul refinery as safety engineer through Furnace Fabrica India Limited for SRU plant.

Regards
Pramod

[Guest]

Dear sir
Hon'abla sir I want a job of fire and safety sub engineer
All detail are true so respectable sir i learn in second year of fire and safty diploma appear .
Really i want to job of optior .so make procedure ...
Faith fully
inamdar sayyed zainulabeddin

[Guest]

honorable sir,
my name is syam kumar am a fire safety diploma holder and i had worked with ongc as a safety officer in a sub contracting company named om-tec and also with naffco electro mechanical co.llc abudhabi now i wish to work with dolphin enterprises .
hope fully waiting for your replay
with respect,
syamkumar s

[Guest]

dear sir, iam ex navy chief petty officer with 18 yrs experiance on board naval ships as mech 3.there after i have served in m.n.c namely wartsila india ltd for 10 yrs as a senior executive.iam forwarding my resume, kindly do the needful.
thanks & regards
(k.s.manral)

CURRICULUM VITAE
KUNDAN SINGH MANRAL
MOHALLA TUNERA,NANDADEVI,ALMORA(Uttrakhand)
Email :Kundansinghmanral AT gmail.com

ACHIEVEMENTS :
. Felicitated with 3E Champion Award by Watsila India Ltd, in the year 2003 for software development on plant performance of Power Plants.

EXPERIENCE : Total Experience of 26 Years
I)MAYUR SUITING AT R.S.W.M LTD RISABHDEV,UDAIPUR SITE.
DURATION :MAY-2009 TO TILL DATE.
DESIGNATION-SITE INCHARGE FOR 4.2 M.W WARTSILA POWER PLANT. II)M/S Wartsila India Ltd. Mumbai

Duration : July1999-till date
Designation : Senior Executive
Responsibilities :
1) Operation, maintenance and fault detection of DG power plant in capacity 4.2Mwh.
2) Assisted in installation and commissioning of 4.2Mwh power plant-wartsila 12V32LN.
3) To evolve and put in practice various preventive and predictive maintenance measures to ensure minimum down time and quality power supply.
4) To ensure high availability factor and uninterrupted quality power to the customer.
5) To conduct training and development of subordinates.
6) To ensure cost effective schedule maintenance of power plant.
7) To maintain and generate various reports.

III) M/S MAGNUM POWER GENERATION Ltd.GURGAON
Duration : Dec1998-June1999
JUNIOR ENGINEER MECHANICAL :
RESPONSIBILITIES :
1) Operation, maintenance and fault detection of DG power plant in capacity 25Mwh.
2) Assisted in installation and commissioning of auxiliary power plant equipments.
3) Generating and maintaining of machinery reports.
4) Planning and effective implementation of planned maintenance schedule.
5) Planning of inventory for spare parts and consumables.

IV)INDIAN NAVY
DURATION : JAN1980-JULY1997
CHIEF PETTY OFFICER (MECHNICIAN III)
Served on board Indian Naval Ships in senior supervisory cadre

TRAINING :
. Plant performance and evaluation of power plants.
. Turbocharger maintenance.
. Management training for team work performance.
. Safety and fire-fighting training.

EDUCATION :-
Standard Year Board/University
Graduation Equivalent 1997 Indian Navy
Diploma(mech./marine engineering) 1991 INS shivaji
diploma(RAC) 1986 D.I.M.S,mumbai
higher secondary(science) 1980 Indian navy
high school(science) 1978 UP board

(KUNDAN SINGH MANRAL)

[vijay.dapkekar@yahoo.com]

sir,
if, vacancy of project engg.
plz
reply..
vijay.dapkekar2yahoo.com