Instrument Engineer Bhogat : www.cairnindia.com Cairn India

[krishni84]

Job Title: Engineer Instrument
Department: Midstream Operations
Reporting To: Instrument Superintendent
Location: Bhogat, Gujarat
Job Code: VGMINSTENGR

Position Purpose Maintenance of instrument equipment and systems associated with the Rajasthan wells process plant, utilities and pipeline facilities to achieve top quartile performance in safety, productivity and cost. Provide guidance and support to junior staff.

Position Requirements Contribute to the planning of work programmes to maximise overall efficiency; and to assist other members of the team as required to carry out the planned work programmes.

Work Site ActivityMaintenance of the facilities instrumentation and control systems during normal operation as well as planned and unplanned shutdown periods, using internationally accepted standards and Cairn India Integrity procedures and guidelines.

Personal/Team Performance Measurement and Improvement
Develop self and team in line with set criteria and standards using Cairn India performance measurement and improvement tools and guidelines.

Communication and Information
Support the facilities Communications Guidelines and provide quality information concerning all aspects of work and equipment status to supervisor and colleagues using existing reporting protocol.

Emergency Response
The post holder will be expected to perform Emergency Response duties as defined in the ERP and company standards.

Scope
Maintenance of instrumentation and control systems in designated sections of the plant and Interfield pipelines, and mentoring and training of Junior staff in their relevant discipline.

Qualifications
Degree or Diploma in Engineering, Chemical, Petroleum or Scientific discipline and a minimum of 5 years experience within the offshore or onshore production field. Well developed fault finding capabilities. Good communication and organisation skills. Working knowledge of control room equipment. Awareness and commitment to Cairn India environmental expectations.

Has sufficient technical understanding of assigned facilities to be able to make informed decisions that ensure Cairn India priorities are met and maintained. Able to recognise risks, hazards, losses and prevent conflicts between activities.

Behaviours
Well developed interpersonal and coaching skills, self motivated and able to work with minimal supervision and a strong sense of team involvement. Work in a manner consistent with the operations philosophy and with a heightened awareness of HSE.

Able to work with other teams and team leaders through influencing and negotiation to avoid conflict and arrive at the best overall outcome from a business and HSE perspective. Further requirements are open mindedness, the ability to challenge conventional methods of working and team demarcation lines and to examine options and possible solutions.

HR Contact:
Cairn India
3rd & 4th Floor, Vipul Plaza, Suncity, Sector 54
Gurgaon – 122 002. India

Email :Shalini.vats@cairnindia.com
Website:http://www.cairnindia.com

[Guest]

Sub : Application for the post of instrument engineer.
Respected Sir,
I have came to know from your advt., that there is a vacancy for Instrument engineer in your grand esteemed Organization.

I have also seven years experience as a technician. Currently I am doing a job In Jal international in Saudi Arabia. I am also attaching my resume with this application for your kind Information.

If i get chance, I am assure that you will satisfied with my regular and hard work.

RESUME :
Name : Paun Bharat Bhagavanji
E mail : bharatpaun AT yahoo.co.in

EDUCATION QUALIFICATION :
Sr. No. Education /Course Board / Institute Passing Year Percentage :
1 Graduate Diploma in Electronics Engineering
(GDEE) National Institute Of Engineering Dec. 2008 A grade
Part 1 67.50 %
Part 2 69.50 %
Part 3 70.75 %
2 ITI (Electronics mechanic) N.C.V.T. July 2003 72.00 %
3 HSC (Std.12) G.S.E.B. Apr. 2001 73.33 %
4 SSC (Std.10) G.S.E.B. Mar. 1999 60.14 %

COUMPUTER COURSE :
Sr. No. Course Board / Institute Passing Year Percentage:
1 D.C.S. K.C.I. Mithapur Nov. 2004 First class

WORK EXPERINCE :
Sr.No COMPANY FROM TO FROM :
01 JAL INTERNATIONAL (SAUDI ARABIA) JUNE 2010 TO TILL DATE
02 HI-POINT SERVICES (I) PVT.LTD.JAMNAGAR. (SITE-ESSAR OIL LTD. JAMNAGAR) JUNE 2008 TO JUNE 2010
03 ENERCON INDIA LTD.DAMAN MAR.2005 TO JUNE 2008
04 WELSPUN INDIA LTD.KUTCHH SEP. 2004 TO MAR. 2005
05 TATA CHEMICALS LTD. MITHAPUR AUG.2003 TO SEP. 2004

JOB EXPERIENCE :
INSTRUMENT NAME INSTRUMENT MAKE:
GAS DETECTOR DRAGER, SSC, CROWCON, ZELWEGER
SMOKE DETECTOR APOLLO, BUSH, AUTOSAFE
HEAT DETECTOR APOLLO,
FLAME DETECTOR SHARP IYE, DRAGER
PORTABLE GAS DETECTOR HONEYWELL, MSA, GAS BRADGE
MANUAL CALL POINT MEDC
HOOTER MEDC
FIRE BEACON MEDC
FIRE BELL MEDC
FIRE AND GAS SYSTEM EXPERINCE
NAME
ABB, YOKOGAVA, BUSH, AUTOSAFE
- I have a work experience of Installation, preventive maintenance & fault finding of fire and gas instrument.
- I have knowledge of fire and gas instrument checking and calibration in on line and off line.
- I am also work with portable gas detector instrument calibration and maintenance.

1. I participate in British safety council audits & 5S activities at Tata chemicals ltd.
2. I am included in project work at Tata chemicals ltd.
3. I participate in safety essay writing competition at welspun India ltd.
4. I participate in fire & safety quiz competition at Enercon India ltd.
5. I am runner up in safety quiz competition at Essar oil ltd.
6. I am runner up in primary training of human safety.
7. I receive safe man of year 2010 for lab dept. in yansab.

[Guest]

Instrumentation Engineer with 19 years of experience as Instrument Professional with MNC Sectors in Thermal Power, Refinery & Petrochem, OIL & GAS Fields, Including TATA Power (UMPP) Mundra, Reliance Industries Ltd. Jamnagar, Petroleum development of Oman in Oman, Union carbide Petrochem Plant In Kuwait, Ministry of Water & electricity of Kuwait etc. in India and abroad.

Natwarlal Samatbhai Gohel,
E-mail id : natugohel AT yahoo.com

Education :
Diploma Instrumentation & control, June - 1992.

Relevant experience: 19 + Years
Previous Employment :
- COSTAL GUJARAT POWER LTD. (TATA Power) – Under Doosan Power systems Ltd. India
- Reliance Industries Ltd. - Jamnagar Refinery division India
- PDO - Petroleum Development Oman - under Special Technical Services
- EQUATE Polyethylene Plant – Kuwait, (under ATESCO)
- Ministry of Electricity & Water - Kuwait. (Under IMCO)
- Bombay Minerals Ltd. India
- TATA Chemicals & GHCL. India

Experience Summary :
- Commissioning and Operation & Maintenance of Power Plant
- Construction and pre commissioning of Refinery
- Experience in Oilfield Maintenance in Gulf
- Experience of wide rang of Instrumentation and Instrumentation Systems in Boilers, Storage Tanks, Rotating Equipments, Booster Stations, Oil Terminals, Oil Gathering Stations, Oil and Gas Wells, Pressure Vessels, Heat Exchangers, Columns etc
- Co-ordination and Project Management
- Estimation, preparation of quotations, billing, technical interactions, job planning including manpower planning.
- Testing and commissioning of Instrument panels of DCS, PLC, IRP, F&G, Vibration Control etc

Nature of Projects :
- Power
- Oil & gas
- Refinery
- Petrochemicals

COMPUTER SKILLS :
Languages MS-Office
Packages SAP, INTools (SPI), Setroute, Infoworks etc

Work experience :
Current employment, India, Sep 2009 to till date
Doosan Power Systems India Pvt Ltd. In COSTAL GUJARAT POWER LTD. (TATA Power), Mundra, a (800 X5) 4000MW, coal based UMPP thermal power plant.
Commissioning Manager
Responsibilities :
- Spearheading efforts across Boiler Erection and Commissioning.
- Job involves carrying out complete commissioning activities of Boiler area like commissioning of coal feeders, ID Fans, FD Fans, PA Fans, ESP, BRP, Pulverisers, Soot blowing system, Hydraulic units, Pumps, Fuel oil skids, Furnace etc.
- Activities like, Draft system balance test, Initial Firing, Steam Blowing, Steam generation and synchronisation etc.
- Estimation, preparation of quotations, technical interactions, job planning including manpower planning.
- Job involves substantial on going client development and continuous interaction with clients.
- Attending to enquiries and preparation of quotations, spare procurement etc.
- Instrumentation system commissioning, Loop checking, Interlock checking of equipments, Function checks etc,
- Testing and commissioning of Instrument panels like DCS, PLC, IRP, F&G, and Vibration Control etc.
- Manage instrument maintenance priorities, vendor performance and repair tracking system.
- Testing and official witness acceptance of construction and vendor modifications
- Provide guidance and support to junior staff

Previous employment :
a) Reliance Industries Ltd. - Jamnagar Refinery division India (Mar ’2005 to Sep ’2009) Consultant - Sr. Engineer
Responsibilities :
- During this tenure, Lead a team of construction and commissioning for, (1) Total 22 No of Units Interfacing between DTA and JERP refinery, (2) MTF Expansion Project, (3) Aromatics 270 & 291 unit.
- Planning, Scheduling, Execution and Commissioning of Instruments/ Systems in accordance with the specifications keeping high perception of Cost, Time schedule and Quality.
- Ensure productivity, Quality and Safety aspects in our workforce and to follow company procedures.
- Co-ordinate with other Disciplines/ Departments/ Team and report to the Construction/ Project Manager for Smooth execution and Successful completion of project in well disciplined and self regulated manner.
- Prepare Daily, Weekly and Monthly reports and Look ahead plans and report to the planning and construction/ project manager

b) PDO - Petroleum Development Oman under Special Tech. Services, (Oct' 1997 to Dec’ 2004). Instrumentation Lead Technician
Responsibilities :
- The jobs involved day by day preventive, corrective, emergency shutdown, and planned shutdown maintenance jobs and planning. I have good experience of preventive & shutdown maintenance and commissioning.
- The maintenance of OIL & GAS field facilities like Oil Gathering, Production and Booster Stations, Gas conditioning & export facilities for OMAN LNG project, Wellhead facilities like ESP, Gas lift, Beam pumps & High-pressure gas-well etc.
- Lead and supervise a crew of maintenance
- Monitor construction work sites for compliance with Permit to Work and company standards
- Permit and isolation audits, control and monitor permits and long term Isolations
- Document review e.g. Maintenance Procedures, modification work packs etc.
- Participate in Job Safety Analysis (JSA) process and review conclusions

c) EQUATE Polyethylene Plant – Kuwait, (under ATESCO), (July '97 to Sep '97). Instrumentation Foreman
Responsibilities :
- Construction and Pre-commissioning of the unit
- Involved in Calibration, Installation and Loop checking of the instruments as per the Specifications, Datasheets and Construction drawings
- Erection of instruments as per drawing and also clear the punch points as per client requirement and Drg. Updates

d) MEW - Ministry of Electricity & Water - Kuwait. (Under IMCO), (July ’96 to June ’97). Instrumentation Technician
Responsibilities :
- Planned shutdown maintenance and start up activities
- Toshiba steam turbine (8x300MW) and multi stage flash vessel Distillation units
- Prepare Daily maintenance equipment status Logs

e) Bombay Minerals Ltd. India, (April ‘95 to Feb '96). Instrument Supervisor,
Responsibilities :
- Modifications of plant existing control system, and commissioning of new control system and routine maintenance
- Investigation, repair faults and testing of site and area instrument and control equipment
- Supervise and coach junior staff

f) TATA Chemicals & GHCL. India, (July ‘92 to Mar '95). Instrument Trainee
Responsibilities :
- Commissioning of Thermal Power Plant
- Maintenance of Power Plant, Cement Plant and Caustic Soda unit

Achievements :
- Carried out complete commissioning activities of Boiler area before time schedule
- Involvement biggest shutdown and modification work in RIL refinery in Jamnagar
- Been a part of Jamnagar Export Refinery Project at Jamnagar, a largest grass root refinery
- OMAN LNG upstream gas project commission in OMAN.
- EQUATE petrochemical project in Kuwait.
- Oilfield maintenance

TRAININGS UNDERGONE FOR HSE :
** Introduction to H S E.
** Hazardous identification.
** H2S awareness and escape.
** Fire Extinguisher.
** Permit to work-APPLICANT.
** STOP Program.
** Enhanced site supervision.
** Gas Tester.
** Permit to work-HOLDER.
** First Aider.

[bpdadwaria]

B.P.Dadwaria
bpdadwaria AT yahoo.com

To ingeniously exploit the accessible resources and sharpen my professional skills while contributing towards the success of organisation.

Previous Employer :
M/s. Chambal Fertilizers and Chemical Limited, PO: Gadepan, Distt: Kota (Rajasthan). CFCL – A flagship company of K. K. Birla Group engaged in the manufacturing of Urea and marketing/trading of various other chemical fertilizers and pesticides, is the largest producer of Urea in the private sector with approx. sales turnover of Rs. 2,000 Crores and net profit of Rs.180 Crores.
- Over 10 year experience in the area of Gas and naphtha based continuous process fertilizer plant instruments maintenance.
- Extensive experience in managing the maintenance of PLC and DCS, commissioning and maintenance of naphtha / fuel storage, water pre treatment, effluent treatment plant, demineralization plants
- Expertise in maintenance of gas and naphtha fired high-pressure boilers / captive power plant control and instrumentation

Current Employer : Indian Oil Coperation Ltd ,Panipat
Job Responsibilities :
- I have worked on all types of primary and secondary sensors such as pressure, flow, level, temperature, displacement etc. controlled by Yokogawa make DCS –CENTUM-CS
- Hard wired loop checking from field to control room for Emergency shut down system (Control logix-555 and PLC-3/10 )/ PLC- TRICONIX,
- Various liquid analyzers such as silica, liquid ammonia, Ph, conductivity, etc.
- Various gases analyzers such as ammonia, hydrogen, carbon di-oxide, carbon mono-oxide, methan, oxygen., etc.
- Bently Nevada make vibration monitoring system.
- Maintenance of various type of control valve such as IL, fouress, saunders etc.
- Programming of various type of microprocessor based controller / indicator
- Calibration of all type of primary instts, as pressure, temperature level flow, transmitters and switches.
- Calibration of GAS TURBINE field instruments.
- Commissioning and decommissioning of condensing type turbine instruments.
- Maintenance of field instruments such as :- AFR, actuator(single acting , Double acting), Local gauges, local indicators, Solenoid valves, limit switches etc.
- Calibration of instruments on Pneumatic SCANDURA test table.
- Handling of BUDENBERG deadweight tester.
- Handling of SCANDURA B-20 calibrator, micro Cal calibrator.
- Study of PLC loop drawings, P&I diagrams, control logics etc.
- A great involvement during computerization of comprehensive material management system (CMMS) and industrial and financial system (IFS)
- I have taken 05 days engineering training on CENTUM CS-3000 from YOKOGAWA –BANGLORE- INDIA as well as on TRICONIX –PLC
- I AM DOING JOB ON TRICONIX SHUTDOWN SYSTEM PRESENTLY
- Iam doing job with CENTUM CS-3000 DCS
- I AM ASOCITED AND MAINTENANCE WITH ALL TYPES OF CONTROL VALVES AS FISHER, IL, MESONELAIN, PRIMA, NELES, SOUNDERS VALVE, FLOW SERVE, etc.
> AlL TYPES OF SMART POSITIONERS CALIBRATION AS ABOVE.

Achievements :
- Distinction of putting up effective suggestion in cooling tower plant where transmitter located in blow down line was not showing reading from commissioning of the plant. It was suggested to technical deptt. To relocated the flow element and healthy result came out. I Was awarded BY HR DEPTT. with a certificated.

Year of passing Subject Board/University % Of marks :
10th 1987 PCM Raj. Sec. Education, board 62
12th 1990 PCM Raj. Senior Sec. Education board 56
Diploma 1992 - 95 Instrumentation Engg. Branch Rajasthan technical Education board, Jodhpur 65

[Unregistered]

CURRICULUM VITAE
PARTH A. KAVA
Email ID-parth595 AT gmail.com

Education & Qualification :
DIPLOMA INSTRUMENTATION & CONTROL ENGINEERING completed in May’12
FROMGOVERNMENT POLYTECNIC,GANDHINAGAR
(GUJARAT TECHNOLOGICAL UNIVERSITY)
6TH SEMESTER 7.00 SPI G.T.U MAY-JUNE 2012
5TH SEMESTER 6.23 SPI G.T.U DEC 2011
4TH SEMESTER 5.0 SPI G.T.U JUNE 2011
3TH SEMESTER 5.14 SPI G.T.U DEC 2010
2TH SEMESTER 4.5 SPI G.T.U JULY 2010
1TH SEMESTER 6.57 SPI G.T.U JAN 2010
MITHAPUR HIGH SCHOOL,MITHAPUR-361345
S.S.C 58.62% G.S.H.S.E.B MARCH 2009
Currently i am studying B.TECH in THE INSTITUTIONS OF ENGINEERS INDIA AT kolkata also known as AMIE in distance learning.

Computer Skills :
Software skills :
Basic computer operations and applications, MSOffice, C language.

Operating system proficiency :
Windows 95, 98, XP professional, XP media centre, vista, Windows7

Strength &Achievements :
Ability to work in Group& Motivate people.
Versatile in nature.
Clarity of thoughts.
Good co-ordination Skills and Can say “no” to people when required to do so.
Result Oriented & Positive, Approach.
Good Communicating skills.
Good Problem Solving &Analytical Skill.
Adaptable and flexible approach to work.

Project Details :
In 5th sem : PROJECT REPORT ON “HEART BEAT MONITOR USING MICROCONTROLLER 8051(IC AT89C51)”.
In this project i understand that how microcontroller work with its competable devices like HEART BEAT MONITOR.

FEATURES :
Digital heart rate monitor
Patient monitoring system
Instant output digital signal for directly connecting to microcontroller
Working voltage +5V DC
Compact size

Vocational Training& work Experiance :
I have an experiance in TATA CHEMICAL LTD. As a student trainee for 1 month
DURING THIS TRAINING PERIOD I HAVE MADE AN INDUSTRIAL REPORT ON
“TURBINE SUPERVISORY INSTRUMENTATION”.
I am working presently in RELIANCE INDUSTRIES LTD.(oil and gas sector refinery) At jamnagar. In contractor INVENSYS INDIA PVT LTD. From 25 octomber 2012 to till now. Play roll As a diploma technician.
I having on an experience various transmitter like INVENSYS FOXBORO,BFI’S flame scanner, and other field instrument.
In reliance industry i m working in dta/sulphur plant.

Field of Interest :
Controlling devices,
Power plant
Automation

Extra Curricular Activity :
I have done course of M.S.ACCESS 2003 & C LANGUAGE IN 2008.
I have participated in IFAW Animal Action Weekdrawing competetion in Mithapur,Gujarat.
I have participated in SAVE THE WHALE SHARKpainting competetion held on 2004.

Personal Details :
Name : Parth A Kava
Date of Birth : 25thJuly 1993
Sex : Male
Nationality : Indian
Languages Known : Gujarati, Hindi, English.
Hobbies : Playing out door games, Listning Music, Travelling, Reading
News paper, Surfing on internet, Singing.
Father’s Name : Arvind P Kava Mother’s name : Kiran A Kava
Marital status : Single

I here by declare that the above written particulars are true to the best of my knowledge and belief.
(PARTH KAVA)

Place : Mithapur, dist-jamnagar, Gujarat
Date :
Signature :

[Unregistered]

RESUME
Hemal d Karmur
E-Mail : hdkarmur AT gmail.com

Objective :
To take up challenging careers and grow consistently along with the organization.

Personal Details :
Father's Name : Deshurbhai
Date of Birth : 03.02.1992
Sex : Male
Nationality : Indian
state : Gujrati
Languages Known : Gujrati , Hindi , English
Study : BCA

I have Completed “BCA” in Saurashtra university in college ,yadav college of Computer science -junagadh

Technical Expertise :
EDUCATIONAL QUALIFICATIONS :-
Course Board/ University Percentage Passing Year :
S.S.C G.H.S.E.B 53.080% 2007
H.S.C.-GENERAL G.H.S.E.B 71.71 % 2009
B.C.A Saurashtra uni 53.00% 2012

Professional Experience : I have fresher

Declaration :
I pledge and pronounce that all the above information is true to best of my knowledge.
Date : 22/06/2013
Place : jamnagar
Yours truly,
hemal d. karmur

[kingrais]

I have Experience in Offshore and Onshore market Specially In Dubai. Currently i am Working with rakca.com biggest organization their Head Office is Ras Al Khaimah. I am marketing manager solve all web site related problems. I know what is offshore and Onshore business terms and Condition.