Mechanical Engineer Hyderabad : Totem Infrastructure

[muthukalee]

Position :AGM
Code :AGMBD
Qualification :BE-Mech
Experience :12 - 16 years
Planning, monitoring and analyzing, operation & maintenance of plants and machinery across sites.
Location :Hyderabad

Position :Mechanical Engineer
Code :ME
Qualification :BE-Mech / DME
Experience :5 - 8 years
Installation & commissioning of new equipment.
Day to day operation and maintenance of all equipment at site.
Location :Sites across India

About us :
Totem Infrastructure Ltd. is a professionally-managed infrastructure Company with an impressive growth rate and with projects all over India. Our Company is involved in the construction of national highways, irrigation projects, railway lines and industrial infrastructure projects , right from the initial design stage up to execution.

Contact us :
723, Sri Venkateshwara Hills
Road # 3, Banjara Hills
Hyderabad - 500034
Andhra Pradesh, INDIA
Phone : +91 40 2335 4399 / 4400
Fax : +91 40 2335 4396
Email : info@toteminfra.com
http://www.copperbm.com

[Guest-IJT]

Dear Sir,
Review of my credentials will confirm that I have capabilities to serve as a
catalyst for successful assignments as i have got experience in troubleshooting
of high end electro mechanical devices, pneumatics, furnaces used in photovoltaic industry.I have experience in installation and commissioning the U-shaped cell line at INDOSOLAR Ltd, greater noida.
My goal is to transit my enthusiasm, creativity & experience into a
position where I contribute to the core objectives of an organisation. I am
certain that my presence in your team will prove to be beneficial to your
organisation. As such, I would welcome an opportunity to speak with you to
evaluate your needs & share my ideas.
I hereby a copying my resume for your kind refrence
CURRICULUM VITAE
Abhimanyu Tiwari
abhim.tiwari AT gmail.com
OBJECTIVE : Aiming for perfection in every job undertaken i.e. strive for excellence in every virtue of life. .
Hobbies :
> Listening Music
> Playing cricket
> Singing
Extra Curricular Activities :
> FIRST in Paper presentation organized in Anand Engineering College during College Annual festival “Cerebrum”
> FIRST in Paper presentation organized in Anand Engineering College during Tech Fest “Interface”
> Active member of College Registration Committee.

Education :
Professional Qualification :
B.Tech in Electrical & Electronics Engineering.
B.Tech :
Obtained 68.53 % marks in 2010.
College :
Anand Engineering College, Agra (Uttar Pradesh)
Uttar Pradesh Technical University (UPTU).
12th :
From Kendriya Vidyalaya Mathura Cantt, C.B.S.E Board, Obtained 74.8% marks in 2005.
10th :
From Kendriya Vidyalaya Mathura Cantt, C.B.S.E Board, Obtained 77.6% marks in 2003.
Professional Experience
15-jul-2010 TO Till Date
Company : INDOSOLAR LTD.
Leading Indian manufacturer of solar photovoltaic cells. Current manufacturing capacity is 160 MWp with an average efficiency rating of 16+%, peaking at 17.2%.Production capacity will be expanded to 360 MWp by end of fiscal year 2011, and Line C will have the capability to produce both multi and mono crystalline cells. Machinery and technology have been supplied by industry leader, SCHMID GMBH.
Designation : Maintenance/Process Engineer.
Job Responsibility :
- Responsible for Maintenance and Troubleshooting problems mainly in the Metallization Line from ASYS in line A and B at INDOSOLAR.
- Functional Knowledge of ASYS Printers.
- Worked in the Chemical Wet Bench Processes Machines like Acid Texturing Machine, Phosphorous Doper Machine, Phosphorous Silicate Glass and Edge Isolation, Light Induced Plating Machines from M/s SCHMID.
- Responsible for Maintenance and Troubleshooting problems in the PECVD from SHIMADZU.
- Responsible for Maintenance and Troubleshooting problems in the FURNANCES from SIERRATHERM.
- Troubleshooting problems on Automation machines from SCHMID.
- Installation and commissioning of machines.

Key Skills :
INDUSTRIAL EXPOSURE :
- Attended 3 days workshop by SCHMID, Germany.
- 1 Month Industrial training at INDIAN OIL CORPORATION LIMITED, MATHURA REFINERY, MATHURA.
- 6 Weeks Industrial training on EMBEDDED SYSTEMS at ASSOCIATED ELECTRONICS RESEARCH FOUNDATION, Noida.
- 4 Weeks Vocational training on OHE and PSI Equipments, Protection system and Power supply installation from INDIAN RAILWAYS , agra.
FINAL YEAR PROJECT :
- Automatic Phase Changer Cum Sequential power ON.
Field Of Interest : Transformers.
OTHER SKILLS :

Operating Systems : Windows 98, 2000 and XP.
Language : Basic Knowledge Of C.


Declaration : I declare that the information and facts stated herein above are true to the best of my knowledge.
Place : Date: (Abhimanyu Tiwari)

[Guest]

Y V SRINIVAS

Mail Id : - yvsrinivas.mech AT gmail.com

OBJECTIVE
- To enhance myself through sincerity, hard work, risk taking ability and good time management in an organization providing enough opportunity for continuous learning, which will enable me to serve the organization in a better way and work towards achieving the organization’s objective
BRIEF OVERVIEW
- A dynamic and hardworking go-getter with abilities to accept challenges and deliver results
- An effective team member with strong trouble shooting and problem solving skills
- Hardworking and dedicated with good working skills
- Ability to innovate and adapt to new situations
EDUCATION
- Btech degree in Mechanical Engineering
College : P.Indra Reddy Memorial Engineering College
Board : Jawaharlal Nehru Technological University Hyderabad
Marks : 70%
- Diploma in Mechanical Engineering College : V M R Polytechnic Warangal (dist), A.P.
Board : State Board of Technical Education and Training
Marks : 60.80%
- SSC School : Z.P. High School
Board : State Board of Secondary Education
Marks : 61%
TECHNICAL PROFILE
Skills Acquired : MS Office, MS Excel, MS Power point.
CAD
AUTOCAD : 2D Drafting.
PROE WILDFIRE : Part Modeling, Assembly & Drafting.
Solid Works : Part Modeling, Assembly & Drafting.
ACADEMIC PROJECT/TRAINING DETAILS
Project Title : AUTOMATED PNEUMATIC PUNCHING MACHHINE
Role : Team Lead.
Duration : Dec 2010 – Mar 2011
Location : Hyderabad.
WORKING EXPERIENCE
Overhauling of Turbine & Generator 30 MW (BHEL Make) TATA POWER COMPANY LTD, Haldia.
Overhauling of Turbine & Generator 40 MW (BHEL Make) INDIAN OIL CORPATION LTD, Haldia.
Currently working as MAINTAINANCE ENGINEER in Rotodyne Engg Services Pvt Ltd. Jharsuguda under IPP/SEL/Vedanta Aluminum PVT Ltd (4X600MW) from MAY 2011.
TRACK RECORDS IN WORKING AREA
- Main Turbine Bearings inspection & LP A & B Turbine last stage blades inspection work
- Feed pump turbine bearing inspection & axial shift adjustment work
- Feed pump cartridge replacement & gaskets replacement bearings inspection & mechanical Seals &bellows replacement & hydro testing work
- Booster pump bearings replacement &mechanical seals replacement work
- Condenser fluid testing work & tubes cleaning & Hot well inspection & cleaning & steam space inspection work
- Occw & cccw pumps mechanical seals & bearings replacement
- Valves(pcv & mov &manual) sheets lapping & spindles replacement & gland packing Replacement work
- H.P & I.P Control valves Linkages adjustment work & EH oil filters replacements work
- Dearator inspection work
- MOT screen filters cleaning & booster pump pressure setting & oil coolers plates changing Cooler change over valve & oil purifier maintenance work
- Generator hydrogen coolers cleaning & hydrogen dryer maintenance work
- Seal oil station vacuum pump & recirculation pump & main pumps & filters changing & DPR Setting work
- EH oil station pumps maintenance & coolers cleaning & filters changing work
- Jacking oil pumps maintenance & filters cleaning work
- Stator water pumps maintenance & coolers cleaning work
- Circulating water system pumps maintenance & hydraulic operated butterfly valves Cylinder piston rings & Orings changing work
- All H.P & L.P heaters cleaning & hydro testing work

ROLES AND RESPONSIBILITIES
- Preparing the daily preventive maintenance checklists.
- Handling the work in site and arranging the manpower and give the instruction to the workers
- Maintain the records of the equipment drawings and spares list.
- Maintain the equipments good condition.
- Prepare the shutdown works.
- Solving the break down problems faced by the management.
HOBBY
- Playing cricket.
- Reading books.
- Listening music.
DECLARATION
I hereby declare that the above written Particulars are true to the best of my knowledge and belief.
Date :
Place : Hyderabad Y V Srinivas