www.3dplmsoftware.com 3DPLM Software Solution Ltd Pune : Mechanical Engineer

[muthukalee]

3dplmsoftware.com

Position : M.E. / M.Tech (2009 and 2010 batch)

Job Code : 3DSDEVPGM
Experience : 0 to 1 years
Location : Pune

Requirements :
* Should be from reputed Engineering Colleges and Institutes
* Should be from Mechanical / Civil / Aerospace / Metallurgy stream
* Should have excellent academic records
* Should be interested in making career in PLM & Product Development environment
* Good at communication, problem solving, analytical skills, Self motivated

About us:
3DPLM Software Solutions Limited (3DPLM) is a 70:30 joint venture between Geometric Ltd., a specialist in Product Lifecycle Management (PLM) software development and Dassault Systemes (Nasdaq : DASTY; Euronext Paris : #13065, DSY.PA), the world’s leading provider of CAD tools and PLM solutions.

Contact us:

3DPLM Software Solution Limited
Plot No. 15B, Pune Infotech Park
M.I.D.C, Phase-I, Hinjwadi, Taluka Mulshi
Pune 411 057
+91 (20) 2290 6600, 6652 6600
+91 (20) 6675 0827 (fax)

email
http://www.3dplmsoftware.com

[Deepak Kumar Pandey]

Dear Sir/ Madam,

I am the applicant of the post of Solution Engineer. I have passed BCA diploma degree. I prefer to get job near delhi in india. I will send you my C V for your kind consideration.

Thanks and Kind Regards
Deepak Kumar Pandey
New Delhi

[Guest-IJT]

Contact number: 09972569448
Email id: suhas.kharade AT quest-global.com

CAREER OBJECTIVE:
To make the working environment and colleagues so much courageous and positive that any difficulty should be overcome with the joint venture of all the people of the organization and in my opinion this is the only key to achieve the organizational goal.

EDUCATION:
** B.E, Mechanical Engineering, graduated with Aggregate of 70 %
** Department of Mechanical Engineering,
** Gogate Institute of Technology Belgaum, June 2007
** Project Topic: “Accident free vehicle”
** DME, Mechanical Engineering, Passed with 63.01%
** Govt. Polytechnic, Belgaum, June 2004
** Project Topic: “Abrasive air jet machine ”
** SSC from Karnataka Board, June 2001 with 69%

PROFESSIONAL SUMMARY:
** 35 months of experience in Stress Analysis and Design, presently working as an Engineer (Analysis) with Quality Engineering and Software Technologies Pvt. Ltd (QuEST) From 9th July 2007 to till date.
** From last 20 months working at JFWTC (GE Research center, Bangalore) as an Engineer (Analysis
** Experience in Wind Turbine (Assembly/components), Oil & Gas, Centrifugal compressors (Assembly/components) and Reciprocating compressors (Assembly/components).
** Finite Element Analysis in ANSYS – Linear / Non-linear static Analysis, Modal Analysis, Harmonic Analysis and Optimization. Good at writing APDL macros.
** Strong Mechanical fundamentals and good technical skills.
** Worked as Single Point of Contact, Implemented ISO process, Project Management, Preparation of technical document.
** Worked for centrifugal compressors for 15 months.
** Worked few projects for gas turbine, Transportation team.

PRESENT ROLE
** Formulates and tracks work plans and delivery milestones in keeping with customer goals.
** Adhere to ISO/quality and technical standards in the delivery of project.
** Taken responsibility for one's actions and decisions; willingly accounting for the results of an assigned action, efficiently following assignments through to successful timely completion with proper attention to detail
** Schedule tasks within the team in consultation with other team members and Tech Lead.
** Using the appropriate tools and software, deliver project specifications as understood from customer interaction.
** Handle customer queries regarding technical aspects of the project.
** Aware of the benchmark for all activity and works to constantly meet and exceed these.
** Willing and able to adjust to multiple work demands and priorities.
** Committed to team goals placing teams interest above personal interest.
** Comply with QuEST policies and processes and adhere to relevant timelines.

PROJECTS HANDLED
Organization: QuEST Pvt. Ltd.
Period of Work: July 2007 – till date
** Structural analysis of wind turbine barring with full assembled model (Hub, bearing, bolts, Blade)
Design Validations through Experimental results got from Prototype model.
** Modeling and meshing of the model as per the latest drawings given by customer.
** Structural analysis was performed using FEA software ANSYS.
** Bearing displacements are extracted by using APDL macro, also had a look at bolts stresses.
** Bearing contact stresses are calculated.
** Also tried many DOE to modify the prediction of stresses by changing contact angle, Initial interference and oscillation.
** Also FEA model is created which is much closes to reality model.
** Simulating bolt preloads using pretension elements, also solid and beam bolt comparison is done.

** Reciprocating compressor Analysis for Refrigerator (All parts are analyzed in this projects like Housing, base plate, discharge tube, Mufflers, shaft, gasket, Feed valve).
** Meshed each model and carried both static and model analysis on the model.
** Compared natural frequency of the model with other model, by using Campbell diagram.
** Done some design modifications change natural freq of the model.
** Also carried out some static analysis to select optimum material for the model.

** Cyclic symmetric static and modal analysis of impeller.
** Analysis is done only for sector of model by using cyclic symmetry concept.
** Optimized fillet mesh size for impeller inlet and outlet portion.
** Bkin and Mkin properties are used to solve static analysis.
** Interference is used to simulate penetration between shaft and impeller.
** Performed modal analysis by using cyclic symmetry model analysis.
** Campbell and safe diagram are drawn to find out critical frequency.
** Suggested some changes to the customer so that resonance can be avoided.

** Modal Analysis of full cylinder manifold system of centrifugal compressor by using surface modeling method (consists parts like cylinder, crank case, bottles, support, spacer, slide body).
** Full surface modeling is done in Unigraphics by using drawing given by GE.
** FEM model is prepared in shell element.
** Taking dawing mass and thickenss into consideration have applied corrected density to the surface.
** Simulating bolt preloads using pretension elements
** The model is solved for first few modal frequencies.
** Also suggested sum support for pipe to avoid particular mode.
** Preparing detailed report comparing the water cooled and gas cooled designs of Gemini Cylinder

** Harmonic analysis of Vamana casing used for X ray tube.
** First free free modal analysis is done and frequency from that analysis taken as input to the harmonic analysis. .
** Displacements given as initial input and found out response to that frequency and initial displacement.
** Results from harmonic analysis later used to do acoustic analysis to fond out noise level.
** Also done separate individual system analysis of various systems inside tube and made attempt to reduce vibration which is transferring from rotation shaft to casing.

** Centrifugal compressor Modal and Static analysis (Path operation is Performed for this analysis).
** The model is checked according to the path operation requirement.
** Model is meshed by using combined tet and hex elements (Hybrid mesh).
** Bolts are created and first load case ran as assembly loads.
** Second load case ran with specific pressure load inside casing with corrective pressure on covers and nozzles.
** Also Free free modal analysis performed to find out fundamental natural frequencies and mode shapes.

** Static and modal analysis of stator frame of wind turbine generator stator.
** The model is fully meshed with hex mesh.
** Modal analysis is performed and examined for specific Lobe pattern and done some modification in model to avoid such lobe pattern which matching with reference results.
** Also performed static run with load (calculated from magnetic filed), displacement coming for stator were more, so to reduce those displacement some design change has been dome and brought displacement down within limit

** Gravity sag analysis for Gear case of locomotive (to find out stress in filet region due to gravity load), also modal analysis is performed later.
** Static analysis is performed and found out the critical stress at fillet region.
** Also completed and submitted report to the customer for Fatigue load cases.
** Modal analysis also performed on this model.

** Also worked completed many other project task as mentioned below.
** Mechanical Analysis of Casing of BCL Centrifugal Compressor with bolt simulation.
** Axi-symmetric analyses of balancing drum and Honeycomb seal.
** Static and Modal analysis of the Thremodyne casing.
** Static and Modal analysis of the Centrifugal Compressor inlet guide vane.
** Gas Turbine Blade Analysis.
** Static and modal analysis of centrifugal compressor stator.
** Worked on Super element formation and load case operation for Different analysis.

SKILL SET & STRENGTHS
** Ansys, Hypermesh (Basic), UG, Ansys workbench.
** Good command on Analysis like Linear/Non linear Structural, Thermal, Harmonic and Modal Analysis.
** A good team player.
** Strong communication skills

ACHIEVEMENTS
** Awarded ‘C-SAT 93%’from customer for the project on Wind turbine (Client: GE Energy)

PERSONAL DETAILS:
Date of birth : 22nd July 1985
Sex : Male
Father’s Name : Mr. Shivaji Kharade
Language known : English, Hindi, Marathi, Kannada

[rushiakolkar]

Résumé for
Rushikesh Akolkar
Email : rushi.akolkar AT gmail.com
rushi.akolkar AT ymail.com
Objective :
Seeking graduate engineer role in a Research and development team where my in-depth knowledge of Product designs, Auto-CAD technologies can broaden the base of expertise in your organization.
Qualification Summary :
- Proven Ability to analyze the problem and provide Innovative solution.
- Quickly learn and adapt new things.
- Effective verbal and written communication skills.
- Ability to work in team and individual level.
Technical Summary :
- Design Technologies : Auto CAD (2010), Catia (V-5,R-19).Pro-E, Solid Edge, Knowledge of GD&T.
- Computer Knowledge : Windows XP, Microsoft Office.
Experience Summary
Trainee Engineer - Varroc Engineering Pvt. Ltd (Purchase Department), Pune, India (2009 August – 2009 December).
- Starter And Wiper Motor Section (2009 August – 2009 December)
- Handled the Supply-Chain management section of Automobile products.
- Effective Interaction between R&D teams and product vendors.
- Responsible for reporting to senior purchase officer about product inventory status.
- Effectively worked with SAP (Material management section) for creating process excellence in organization.
Design Engineer – worked in Micro Machining Services. Chikalthana M.I.D.C. W-31, Aurangabad, India. (2010 Jan-2011 April)
- 3d Modeling on Pro-E.
- Deep Study of component for improving quality & Aesthetic look.
- Taking appropriate and corrective action on difficulties.
- Organizing meeting with all departments before manufacturing new product.
Trainee Engineer – Presently working in Tool Tech SPM Pvt. Ltd (Design Department), Aurangabad, India. (May 2011 to till now)
- Currently working on following projects.
- Hydraulically operated rolling machine for silencer body.
- Shot filing machine for pipe bending.
- Tig welding machine for silencer body
- Boring machine for swing Arm.
Successfully doing roll in modeling parts of all machines And using AutoCAD for 2D drafting.

- Currently working on following projects.
- MCB unscrewing Automation.
- Loading unloading machine for MCB.
Education Details
- Bachelor of Engineering in Mechanical Engineering
Dr Babasaheb Ambedkar Marathwada University
June 2009
- Higher Secondary Certificate
Maharashtra State Board
June 2005
- Secondary School Certificate
Maharashtra State Board
June 2003
Project Summary :
Project Name : Mechanically Operated Grease Lubrication System (2009)
Team Size : Three members
Project description :
Conversion of HAND lubrication system in to Mechanically Operated (semiautomatic) lubrication system achieved by the project and also Centralized provision of grease to the critical parts of machines is also maintained.
Roles and Activities in project :
- Create problem definition and provide innovative solution in organization.
- Project’s Product design and assembling
- Technical Documentation for project
- Demonstration of product
Seminar Delivered :
- Presented paper on cutting edge technologies like “Aerodynamic product designs in Automobile ” in Awut 2007 J.N.E.C
- Seminar given on “Electro magnetic clutches” in December 2008 in JNEC.

Co-Curricular Activities :
- Participated in National level event Contraption in Awut 2008 held in J.N.E.C.
- Presented paper on cutting edge technologies like “Aerodynamic product designs in Automobile ” in Awut 2007 J.N.E.C
- Organized a National level event Minds-I in Awut 2007 & 2008 J.N.E.C.
- Worked as Committee Head for I-CAM a National level technical symposium in Chanakya 2009 J.N.E.C includes more than 10 members in committee.
Extra - Curricular Activities :
- Always actively participated in the sports events from school days which include various appreciations from sports comities like Maharashtra sports association.
- Participated in National level cricket competition organized by All India Orissa Indoor Cricket Association at Puri (Orissa) in August 2002.
- Participated in National Level Rugby Championship organized by Amateur Rugby Association of Manipur in Feb. 2001 at Imphal (Manipur).
- Won the First Prize in Rugby Championship organized by Maharashtra sports association in Dec. 2002 at Aurangabad (Maharashtra), also won the title of “player of the tournament” in the same.
- Participated in Inter college Cricket competitions every year (2005-2009).

[Iranna Birajdar]

Birajdar Iranna Siddhanna
E-mail : iranna.birajdar44 AT gmail.com
Objective :

Seeking suitable position where, I can apply my talent, ideas and would like to emerge as a result oriented professional in your esteemed organization.
Academic Profile :
B.E in Mechanical Engineering passed in the year 2011 from Smt. Saroojini Leeladharan Nair College, Raichur with first class distn - 76.69%
Month-year Semester Marks Percentage
July-2011 8th sem 617/750 82.26
Jan-2011 7th sem 634/900 70.44
Jun-2010 6th sem 621/900 69.00
Jan-2010 5th sem 605/900 67.22
July-2009 4th sem 683/900 75.88
Jan-2009 3rd sem 657/900 73.00
July-2008 2nd sem 529/775 68.25
Jan-2008 1st sem 434/775 56.00

Pre-degree academic performance :
Course
University/Board
School/College
Percentage
S.S.C. PUNE Mahasiddha Vidyamandir, Donaj 79.73
H.S.C PUNE D.B.F.Dayanand College Of Arts & Science, Solapur
62.00
Achievements and extra-curricular activities :
- Own First prize in camp organized by “SHAHU SHIKSHAN SANSTHA PANDHARPUR” in which 86 schools were participated across Maharashtra at SSC level in 2005. Certificate received from Honorable Dy. Chief Minister Mr. R.R. Patil.
- I got “BEST OUTGOING STUDENT” award in SSC class.
- I have secured first rank in SSC at school.
- Throughout engineering course, I have ranked in top 3 students.
- At school level participated in kho-kho team and at college level participated in cricket team and won the prizes.
- Successfully completed computer training on MS-CIT (Microsoft word, Excel, PowerPoint etc).

Strengths :
- Believe in the spirit of teamwork, Adaptable with people at different levels.
- Hard Working, self Confidence, better time management capability, can work effectively in a group as well as an individual.
- Continuous learner and consistent performer, Open minded and always willing to share ideas and thoughts.
Project and Seminar work :
Project work in B.E. :“AUTOMATIC MULTISTORIED CAR PARKING SYSTEM”
The main aim of the project was to cut down the time to park the vehicles in the lot and help the motorists to recall the exact parked space. We have developed this by using 89C51 Microcontroller.
Seminar work : Presented Seminar on “METAL MATRIX COMPOSITES”
- Meaning of Composites, Classification of composites,
- MMC, Fabrication of MMC
- Experimental procedure, wear behavior.
Experience : Lear automotive India pvt.ltd from :25 JULY 2011 to present
- A competent professional with about 2 months of extensive experience in Material Planning &Logistics and also in product engineering.
Role :
- Maintained BOM (Bill of Material) for smooth flow of material.
- Handling material planning for daily requirement of material.
- Inventory management within target.
- Now currently handling product engineering of three projects VOLKSWAGAN, MAHINDRA & GENRAL MOTOR.
Key Skills
- Actively looking for Mahindra projects
- Monitoring the long lead & critical items, regular interaction with Quality for feedback of critical parts
- Knowledge of various production techniques such as Kaizen, Just-in-time, TQM, Lean production, six sigma. 5-S, Team Working and Time Management