Shift Mechanical Technician : Saudi Arabia

[Mohammad Sajid]

Shift Mechanical Technician – Tetra Pak Arabia – Jeddah – Saudi Arabia
• Education: Diploma in Mechanical Technology.
• Experience: Minimum 3 years hands-on experience in similar position in maintenance function
• Knowledge should have knowledge of hydraulics/ Pneumatics, Mechanical Power Transmission, gearboxes Balancing, Alignment, Bearing monitoring, able to understand drawings & blue prints.
• Knowledge of preventative maintenance planning / scheduling.
• Good fitting skills essential for Job.
• Electrical background is a plus.
• Computer skills: Knowledge of Microsoft Office is essential.
• The person will be working under World Class Manufacturing environment where pre-designed methodology will be used to analyze and eliminate problems.
• Personality: As a shift leader required to manage a team of multi-cultural machine operators. Man management skills are a plus.
Experience 3 – 12 years
Education Basic – Diploma ( Mechanical )
Nationality Any Nationality
Gender Any

Send CV at: tetrapak.recruitment@tetrapak.com

[Guest-IJT]

Name : Samih Khan
Email : sskhan AT gmail.com
Designation / Skillset : Mechanical Engineer (MEP design)
To the Manager
Dear Sir,
I am a qualified mechanical engineer specializing in HVAC, plumbing and Fire fighting designing with an experience of 2 .5 years. I have worked on the prestigious CITC project worth 300 million and the ITCC project worth 600 million. I will offer my utmost potentials and knowledge for the benefit of the organization believing I could obtain further experience and practical knowledge through persistent effort and creative team work.
I am equipped with the latest software tools and ASHRAE, SMACNA, IPC & NFPA standards required to design the HVAC, plumbing and firefighting systems. I assure you inshallah that my knowledge and skills will prove to be a great asset to the company.
Hoping for your kind consideration.
Yours Sincerely,
Eng. Samih Sulaiman Khan
Mechanical Engineer

Resume :
Engr. Samih Sulaiman Khan
Personal information
Full Name : Samih Sulaiman Khan
Post Applied For : Mechanical Design Engineer
Nationality : Indian.
Experience : 3 years.
Career Objective
To offer my utmost potentials and knowledge for the benefit of the organization believing I could obtain further experience and practical knowledge through persistent effort and creative team work.
Education
2003-2007 - Shadan College of Engineering & Technology - Hyd, India
Bachelor of Mechanical Engineering
- with a total grade of 75 %
2001-2003 - International Indian School - Riyadh, K.S.A
Secondary School Certificate - with a total grade of 72.4 %.
2001 - International Indian School - Riyadh, K.S.A
PrimarySchool Certificate-with a total grade of 76%.
Training
(26/6 – 22/8) / 2007 : Bharat Dynamics Limited (BDL)
Training on the operation of CNC machines,on all types
of controls namely- FANUK, SIEMENS.
Software
1. Hourly Analysis Program (HAP), cooling load calculation.
2. Psychrometric Chart- Carrier & Elite.
3. McQuay Duct Sizer,Trane Pipe Designer
4. Mc Quay Pipe Sizer
5. BETA Software for sizing of lbg’s, diffusers(Circular and Rectangular).
6. Softwares for reservoir sizing, Fountain selection.
Practical Experience
Contracting & Construction Enterprises Ltd. (CCE)
Mechanical Engineer, Technical Department.
Reporting To :Mechanical Coordination Engineer:- Eng. Ahmed
Hamaresha
- Projects Worked
- Communication & Information Technology Commission(CITC) :- 300 Million SAR
- Responsiblities :-
1. Shop detailed drawings to be implemented on site, and coordination between the consultant and site on all mechanical works as HVAC, Plumbing, Fire Fighting.
2. Coordination of all Electro-mechanical works in synthetic(composite) drawings to achieve the desired clear height in each floor.
3. StaticPressureCalculations(ESP Calculations) for all AHU’s,FCU’s and Exhaust Fans.
4. Working kitchens floors, Ventilation as per ASHRAE.
5. Distribution of all sleeves around and inside the building for the drain pipes that will be connected to the manholes as per the correct invert level and cover level and the Rain Water Pipes.
6. Ducts, Chilled Water supply and return pipes and copper pipes sizing and selection.
7. Determining the cooling load and design for the desired areas.
8. Selecting the AHU's or FCU's as per the desired capacity and from several suppliers as Royal Temp, Petra, Zamil, York, Trane…etc.
9. Selecting fresh air, exhaust or smoke exhaust fans, direct and belt driven fans either roof top or axial types.
10. Selecting air terminals from several suppliers like GGC and Dania, depending on CFM capacity and Noise level as per ASHRAE standards.
11. Work on RFI’s for HVAC and piping for preparation of invoices.
12. Designing of water supply networks as per the load assigned for each fixture unit.
13. Pumps Calculations, Head and Flow for booster or transfer pumps for the water supply and chilled water pumps.
14. Work on mechanical identification and square metre of duct. Making weekly technical inspection on site.
- Information Technology and Communication Complex(ITCC) :- 563 Million
SAR
- Responsiblities :-
1. Shop detailed drawings to be implemented on site, and coordination between the consultant and site on all mechanical works as HVAC, Plumbing, Fire Fighting.
2. Heat Load Calculations using Hourly Analysis Program.
3. Static Pressure Calculations for all AHU’s, FCU’s and Exhaust Fans.
4. Preparation of Cutting list (Take off) for HVAC materials.
Graduation Project
Structural & Thermal Analysis of Disc Brakes using “ANSYS” Software.
HVAC Skill Summary :
- Formulae and Software based designing for all types of residential and commercial buildings.
- Different types of air-conditioning systems : Central and Non-Central.
- Toilet exhaust system :( Both Residential and Commercial), Door-grill size calculation, Disc valve selection, static pressure calculation, Exhaust fan selection etc.
- Kitchen ventilation and Hood designing.
- Calculation of over all heat transfer coefficient (‘U’), Infiltration and its estimation using crack method and by using Carrier Psychrometric chart.
- ESP Calculations :“Static Regain Method”,“Equal Friction Method”&“Velocity Reduction Method”.
- Heat load calculations (Manually by E-20 & General) and by software programs (Carrier-HAP).
- Use of soft wares such as DUCTU, BETA, McQuay, Pipe sizer etc.
- Stair well pressurization system designing.
- Car parking ventilation : Induction and Centrifugal units, Smoke delivery calculation.
- Cooling Tower selection : Types of cooling towers, Cycle of concentration, Blow down loss calculation, cooling tower rating and selection etc..
- Coil selection : DX-system, Chilled water system, calculation of no of rows etc.
- Desert cooler selection (Dehumidifier).
- Duct designing : Selection of duct (Rectang. Or Round), Calculation of the no of diffusers etc.
- Fire fighting designing : Sprinkler selection, Fire water tank size calculation.
- Estimation and Costing of the parts based on Saudi standards.
- Design in accordance with ASHRAE & SMACNA standards.
- Energy Efficient HVAC system : Heat Recovery wheels, Winter load calculation etc.
- Knowledge related to the Maintenance of Air-conditioning systems and pumps.
- Concepts of “Green Building Design”.
Plumbing Skill Summary :
- Water supply in building: a) Direct System b) Pumped System.
- Ground level (or) underground reservoir sizing.
- Elevated roof tank (Storage Cistern) sizing.
- Pump Selection (HP,Watts).
- Water pipe sizing in buildings.
- Using Plumbers Chart for pipe sizing.
- Calculating the number of smaller diameter water pipes that can be connected to bigger diameter pipes.
- Foul waterdrain in building stack, branch drain/ discharge pipe horizontal drain. Fixture unit rating, Maximum number of discharge units allowed in stack, single stack system, Design of horizontal drain by discharge unit method.
- Design of Septic Tank, Soak away pits and Dispersion Trenches.
- Designing of Storm water drainage system in buildings.
- Auto-pneumatic system, Pressure Tank sizing.
- Garden water supply system and fountain water pipe sizing.
- Calculation of storage tank, Garden water fountain designing and Fountain pumps selection.
- Designing of common appurtenances, Inspection Chambers and Junction manholes.
- Design using a) Darcy Formula b) Chezys Formula c) Manning’s Formula d) Hazem William’s Formula.
- Layout of sanitary fixtures in toilets.
- Design as per NFPA standard.
Fire Fighting Skill Summary:
- Sprinkler Selection and spacing.
- Fire water pump hydraulic Calculation, Fire water pipes.
- Design of fire water pipes.
- Sump selection, Booster pump, Electric pump, Diesel Pump, Main Pump.
- Concept on Deluge System and FM 200 system.
- Awareness on different types of sprinklers.
Place: Riyadh Samih Sulaiman Khan
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4171533
Date & Time : 25th May 2011 9:38 AM (UTC)
IP Address : 87.101.240.7
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2; .NET CLR 2.0.50727)
Predicted Country : Saudi Arabia

[Guest]

Mohsin Ali
OBJECTIVE
Seeking a challenging opportunity in a progressive organization to optimally utilize my experience, skill and knowledge for organizational and professional growth.
ACADEMIC QUALIFICATION
DAE (Precision Mechanics and Instrumentation) 3rd year in Progress from PSTC (Pak Swiss Training Center) Karachi. 3 months left to be completed
TSC (Electronics)
EXTRA COURSES
MS-Office.
Auto-CAD in Progress.
English Language regular lever from Domino
EXPERIENCE
1 worked in shutdown at lottePTA as a mechenical technicion in year 2011