Federal Mogul Goetze India Ltd Patiala : Quality Production Instrumentation Engineer

[Admin]

Company Name : federal mogul goetze india ltd
Company Location : Bahadurgarh ,Patiala Punjab
Designation (of vacancy) : Engineer (Quality&Production)
Company E-mail ID : amarjits23@gmail.com
Company Website : www.goetzeindia.com

Job Description, Candidate Profile, Company Profile, Company Address :
Full Responsibility of Quality And production,Diploma in Instrumentation Tech.with 6.5 yrs of exp.,Working as engineer in Leading Piston manufacturing MNC company.Mobile no-9855791305

About us :
Federal-Mogul Goetze (India) Limited

Manufacturer of world-class pistons, piston rings, sintered parts and cylinder liners covering a wide range of applications including two/three-wheelers, cars, SUVs, tractors, light commercial vehicles, heavy commercial vehicles, stationary engines and high output locomotive diesel engines.

Widest range of piston rings and pistons varying from 30mm to 300mm diameter.

The most modern production facilities at Bengaluru, Patiala and Bhiwadi are certified TS 16949, ISO14001 and OHSAS 18001.

Market leaders both in OEM and aftermarket. Exports to many countries.

Goetze and Goetze Brico provide leading-edge technologies and competitive solutions for original equipment manufacturers and the automotive aftermarket.

Contact Us :
Corporate Office :
Federal-Mogul Goetze (India) Limited
10th Floor Tower B, Paras Twin Towers
Sector-54, Golf Course Road
Gurgaon, Haryana 122002, India.

[Guest]

i want to say if u can help me to know about little bit relatd to your production.....thnx a lot
my query is there are no of processes which are performed during sand testing like permeability,compactability,flowability, fariability,green compressive strength (gcb) ,WTS ....
i want o know about what is the specifications of these processes and also know about what is the effect on sand if value of these processes increase or decrease.......


thnxxx a lot if u can help me ...

[Guest-IJT]

MUZAMMIL. M.A
HVAC PROJECT ENGINEER,
Ambient systems Pvt Ltd, Blue Star
Kochin,kerala,India
Mob-9895537351
Mail id-himuzzu AT gmail.com

Career Objective:
Seeking long- term career in a growth oriented environment. Where my knowledge and experience can be enriched and utilized towards the organizational goals.

Academic Details:
Course
B.Tech. Mechanical Engineering
2005-2009
Calicut University
NSS College of
Engineering Palakkad 69%

Personal Details:
Name : MUZAMMIL. M.A
Date of Birth : 28-04-1987
Nationality : Indian
Father’s Name : M.A.Mohammed
Marital Status : Single
Languages Known : English, Hindi, Malayalam,Arabic
Hobbies & areas of Interests : Music, Trekking, Sports, Racing

PROJECT
- Testing of alternate fuel-sunflower bio-diesel in CI engine & performance analysis.
- Patterns of Innovations & growth of a firm

WORKING EXPERIENCE
(as HVAC, project engineer)
Blue Star dealer,
Ambient Systems Pvt Ltd, Kochin,Kerala

Handled sites
- Mission hospital thalassery ,kerala - Chiller project (150TR)
- Cradle hospital,Calicut,kerala- VRF project(200TR)
- Calicut manor,hotel - ductable project (52TR)

Software Exposure
M.S Office , ANSYS,AUTO CADD

Achievements
- Placed in ‘Tata Consultancy Services’- during the campus placement period
- 10th class school topper.
- won many prizes in sports and extra curricular activities
- Represented school three times for science & social science exhibitions, and one of my project got selected to regional’s.
- Participated in trekking camp at Mussuorie ,Uttaranchal

I here by declare that all the information furnished above is true to the best of my knowledge.

Place : Kasaragod , kerala MUZAMMIL.M.A

[Guest]

CURRICULAM VITAE
PARAMJEET SINGH
E-mail : pbhaker AT gmail.com

Objective :
To become a successful professional in the field of mechanical engg. and to work in an innovative and competitive world.
Strengths :
I can adapt myself efficiently in fast growing environments.
Possitive Attitude and Leadership Quality.
Software Exposure :
CAD Tools Auto CAD 2007
Education :
- B.TECH in MECHANICAL from Swami Devi Dayal Instt. Of Engg. & Technology affiliated to KURUKSHETRA UNIVERSITY KURUKSHETRA with First class 71. 00% in 7th . semester
Aggregate : 70.50% of all semesters.
- Senior Secondary from H.B.S.E. Board (Bhiwani) in 2006 with 61%
- Matric from H.B.S.E. Board (Bhiwani) in 2004 with 75.17%
Training :
Six weeks training at H.M.T (Pinjore)
Six weeks training at Punjab Tractors Ltd.(Mohali)
Academic Project :
Minor project on WORKING MODEL OF DIFFERENTIAL
Major project on CUT-SECTION OF TWO STROKE PETROL ENGINE

I consider myself familiar with Mechanical Engineering Aspects. I am also confident of my ability to work in a team.
I hereby declare that the information furnished above is true to the best of my knowledge.
Date :
Place :
(Paramjeet Singh)

[Guest]

NAME : JATIN CHHABRA
E MAIL : jatinchabraa AT gmail.com
ACADEMIC RECORD :
Exam. Passed Univ./Board Year of Passing Maximum Marks/ SGPA Marks Obtained/SGPA Percentage/CGPA
Class Xth CBSE 2006 500 412 82.4%
Class XIIth CBSE 2008 500 367 73.4%
PROGRAM viz. BE
Upto 6th PEC 2012 10 6.62 6.62
semester

CGPA Obtained in Degree up to last result
Declared. 10 6.62 6.62
TRAINING AND PROJECT(S) UNDERTAKEN :
TRAINING EXPERIENCE
- Gone through one month “Electrical workshop” training
in the Punjab engineering college.
- Gone through one month training in POSCO-IDPC
In bawal distt (Rewari) which is 4th largest producer of steel in the world.
- Going through four months training in JSL(Jindal Stainless Steels) Hissar (Haryana)
PROJECTS AND SEMINAR :
- Gone through a project which is helpful in AOD(Argon Oxygen Decarburization) which is used to decrease the Mn,S,Si,P contents in the making of steels and study how much materials should be added in.
- Gone through the study of IRS(Intelligent Refining System ) which is a virtual software to study the how much material should be added and what temp should be required for manufacture of steels. This software is used in all the industries for manufacturing of Steels in order to increase its efficiency and productivity. Make various changes in JINDAL STAINLESS STEEL HISAR to reduce silicon rate which is helpful in the production and increase in the efficiency of AOD.
- Project on “YIELD MANAGEMENT” at POSCO-IDPC, Gurgaon during one month summer training (june-10).
- Designing and modeling a bridge, 1 feet long, not more than 6 cms wide using only chart paper and six-reeled thread, capable of carrying a toy car weighing half-a-kg. The bridge was designed using AutoCAD after carrying out careful numerical analysis on the basic current knowledge and understanding of the subject.
- Also Gone through the project of material testing by doing various test like impact test , tensile test , bending test …
EXTRA CURRICULAR ACTIVITIES :
- SUB HEAD of infrastructure and hospitality team of pecfest 6.
- JOINT HEAD of hospitality team of pecfest 7
- Active member of rotaract club, Pec
- Active member of NCC(national cadet corps)
- Active member of NSS
- Also take participate in blood donation camp
OTHER ACHIEVEMENTS :
- 2nd Position in Technical Fest of P.E.C UNIV of Tech
- 1st Position in the Mock Placement in Pecfest 5
- 1st Position in the Bulls and Bears in Pecfest 5
- 1st Position in the Quiz-o-Mania in Pecfest 5
- Won various other quizzes and debates at school and college level.
- Active member of IIM(Indian Institute of Metals)
INTERESTS : Reading, Photography, Sketching, Exploring new places,.

[Guest]

RESUME
PARVINDER SINGH

OBJECTIVE
To serve in a reputed organization at a responsible and challenging position which will allow me to utilize my skills,knowledge and capabilities to the strength.

QUALIFICATION
- 10th Class Passed From P.S.E.B Mohali.
- Three Years Diploma in Mech. Engg.

EXPERIENCE
Five Month Training in GURU NANAK INDUSTRIAL .PVT.LTD at Rajpura
LANGUAGE KNOWN
- English.
- Punjabi.
- Hindi.

[Guest]

RESUME

PRABHJOT SINGH
E-MAIL : psbanwait AT gmail.com

Career Objective
To achieve my goals in an exemplary way by keeping my integrity intact with the nature of job and to make important contribution with my skills to the growth of the company.
Academic and Technical Qualification

ACADEMIC QUALIFICATION
10th Passed from C.B.S.E with 50 %
12th Passed from P.S.E.B. MOHALI with 46 %
TECHNICAL QUALIFICATION
Level : Diploma in Mechanical Engg. with 54 % (2005)
Name of University : M.P. Board of Technical Education
Name of Institution : Govt. Polytechnic College,Balaghat,(M.P.)
Computer Skills
Proficient with Microsoft Word,Excel,Power Point and Internet.
TRAINING UNDERTAKEN
Vocational Trainings during college :
Workshop training in Hero Honda agency in Distt. Balaghat M.P.
One month training course on tractor in Tractor Training Centre,Distt. Budhni M.P.
Work Experience
Two years work with my father in our own shop Preet Telecom,Banga Road,Garhshankar,
Distt. Hoshiarpur, deals in mobiles, sims and recharge cards sale.
Five years worked as Incharge,Spare Parts in M/S Cargo Motors Pvt Ltd (Authorised Dealer of Tata Motors Limited),Chandigarh Road,Near Vill. Langroya,Distt.Nawanshahr, in Commercial Vehicles Department since from Sept,2006 to Jan,2012.
Also worked as Works Manager from Feb,2010 to June,2010 and can well do all the official work as paid job,warranty,free service claims, and accidental vehicles job etc.
STRENGTHS
- Specially my parents.
- Fast adaptability to learning new skills and technologies
- Can work independently as well as in a team.

HOBBIES : Interacting with people.
Surfing Internet,
Reading books,Watching Movies.

DECLARATION
I here by declare that the facts given in resume are correct to best of my knowledge and belief.
Place : Garhshankar Prabhjot Singh

[Unregistered]

THIS VACANCY FOR DIPLOMA FRESHER

[Unregistered]

CURRICULAM VITAE
ANUP KUMAR
Email : anupkumarage AT gmail.com

OBJECTIVE :
To handle challenging assignments and providing innovative solutions while working with full potential for the development of the organization.

ACADEMIC QUALIFICATION :
Board Year :
High School U.P. Board 2007
Senior Secondary U.P. Board 2009

PROFESSIONAL QUALIFICATION :
Bachelor of Technology in Agricultural Engineering from Gautam Buddh Technical University Lucknow with aggregate 69% marks
Session Percentage of Marks
2009-10 61%
2010-11 64%
2011-12 68%
2012-13 73%

EXPERIENCE :
- Did my 1st Industrial training from Central Farm Machinery Training And Testing Institute in Anantpur Andhra Pradesh.

Theme of Training :
Study, Selection, Operation, Maintenance, Trouble Shooting and Repair of Power Tiller and Agricultural Implements
- Did my 2nd Industrial Training from Central Soil Water Conservation Research & Training Institute, Chhalesar Farm Agra Uttar Pradesh.

Theme of Training :
Soil and Water Conservation and Watershed Management
- Did my University Project in Organic farming cultivation and Design and Installation of Vermicomposting bed at MIT campus Bulandshahar

COMPUTER SKILLS :
MS Office, Windows Operating System

PERSONAL INFORMATION :
Mother’s name : Chandramukhi
Father’s name : Ramchandra Satyarthi
Date of Birth : 25th Oct 1992
Languages known : English & Hindi
Hobbies : Playing various outdoor games &Surfing Internet for enhancing my knowledge

Place :
Date :

[Unregistered]

Mandeep singh S/o Hakam singh village droli dist & teh. Patiala p.o. Dhainthal pin code 147001
D.o.b 9.10.1983
Edu +2
Basic computer course
Sincerely & hardworking.

[Unregistered]

Mandeep singh S/o Hakam singh village droli dist & teh. Patiala p.o. Dhainthal pin code 147001
D.o.b 9.10.1983
Edu +2
Basic computer course
Sincerely & hardworking.
Contact. 9592035580