Piping Engineer : Resume CV

[swapnesh_gupta]

SWAPNESH KUMAR GUPTA
Mobile: 09795774846/07668084511
E-mail: swapnesh_gupta AT yahoo.com
Gopal-ganj, Mauranipur, distt-Jhansi (U.P.)
PASSPORT NO: - F9869769

Synopsis
1 A qualified mechanical Engineer conversant with ASME / ASTM / OISD/ IS codes, good knowledge of Piping Engineering, Plant and Equipment Layout and stress analysis.
2 2 year of site exposure in the areas of Piping maintenance, quality assurance in GASCO (ABU-DHABI, UAE) & ADGAS (DAS-ISLAND, ABU-DHABI, UAE) project.

OBJECTIVE
To work in a challenging, creative environment and to contribute effectively towards the goal of the organization along with acquiring newer skills and competencies

PROFESSIONAL EXPOSURE
Completed post-graduate diploma in “PIPING ENGINEERING” course from Suvidya Institute of Technology with the following skills
- Generation of Isometrics
- Preparation of MTO
- Pipe Rack Design
- Tank Farm Design
- Pressure Temperature Ratings
- Reinforcement pad calculations
- Piping Layout
- Preparation of Valve Data Sheet
- Piping Material Specification

Knowledge Of:
- Plot plan development
- ASME codes
- Stress Analysis And Pipe Supports

WORK EXPERIENCE
Worked with Emirates Petrochemical services as a Project Engineer from March 2008 to November 2009
Projects worked: a) GASCO, RUWAIS NGL PLANT, ABU-DHABI, U.A.E.
b) ADGAS, DAS-ISLAND, ABU-DHABI, U.A.E.

Responsibilities
- Analysis of available work scope as per original contract.
- Planning, Estimation, Billing, Quantity surveying
- Mobilization of Site
- Monitoring of Daily/weekly/monthly progress and plan work schedule
- Holding the Work permit during the Execution of Work
- Close monitoring on daily progress and prepare monthly work schedule.
- Close Co. Ordination with Engineering Office, client & sub-contractors to resolve out
Standing Engineering and material related open issues, which are critical to project
- Preparation of monthly invoice as per progress report.
- Preparation of extra work claim which is not include in original BOQ.
- Co ordination of all the mechanical piping activities with client, Consultants, Sub- Contractors for smooth progress of the job.
- Through of all specification, codes like ASME, ASTM, ANSI, API, drawings, standards etc. for easy execution of the job.
- Responsible for execution of all field engineering activities related to all underground and above ground piping system.
- Take initiative & develop positive attitude towards work & accept challenge. Work as a team

Maintain healthy work atmosphere & safety awareness within the group.
- Analysis of GA, P&ID, PFD & Isometric drawings.
- Co-Ordination with Other Mechanical Depts. like QA/QC, Equipment, Steel Structure etc.
- Co-Ordination with Other Depts. like Civil, Electrical, Instrumentation etc.

EDUCATION
- B-Tech in Mechanical Engineering with 66 overall percentages in 2007.
- 12th from U.P. Board with 64.20 percentages.
- 10th from U.P.Board with 64.67 percentages

EXTRA CURRICULAR ACTIVITIES/ACHIEVEMENTS
- Cleared Gate-2007 with 88.16 percentile (All India Rank 2286).
- I am an active member of mechanical society of my college “MECHALLOY’S” a cultural fest SRIJAN.

SOFTWARE KNOWN
- Proficient with AutoCAD(2004) ,MS office
- Introductory knowledge of CAESAR II

PERSONAL DETAILS
Date of Birth : JUNE 4, 1984
Languages Known : English, Hindi
Marital Status : Single
Nationality : Indian

[Guest-IJT]

Piping Engineer

Resume
Namrata Mishra Mobile :

Objective
An experienced, reliable and efficient Piping Engineer with an extensive knowledge of industry standard practice. Independent and hardworking with proven ability to meet deadlines and surpass even the closest given time schedule.

Academic details
- B.Tech in Mechanical Engineering from IACR Rayagada under B.P.U.T (Orissa) with percentage of 71.61 % in 2006.

Work experience : 4+ years
Company : Converse Technologies Pvt. Ltd
Hyderabad
Post : Engineer- Piping
Duration : February 2009 to Till Date
Job Profile : Preparation of Basic design package
Preparation of specifications and catalogs for modeling in Auto plant.
Extracting Reports from Specs. And models to support the project
Preparation of Equipment and piping
Layout,
Checking Nozzle orientation
QA &QC of Pipe Routing
Checking of Isometrics
Preparation of Gad and QC.
Preparation of Isometrics and QC
Project1 : GTC 05/150
Client : Qatar Petroleum Corporation Ltd
Project2 : GC07105900
Client : Qatar Petroleum Corporation Ltd
Company : Praxair India Pvt.Ltd, Bangalore
Post : Engineer -Piping
Duration : September 2006 to January 2009
Job Profile : Preparation of Basic design package
Line sizing, pressure drop calculation
Preparation of specification for valves
Preparation of Equipment and piping
Layout, checking Nozzle orientation
Selection of pipes and pipe supports.
Company : Mantra Udyog, Bhubaneswar, Orissa
Post : Cad Engineer (On job training)
Duration : November 2004 to March 2006
Job Profile : Preparation OF GAD & Isometrics

Key skills
- Experience in Detailed Engineering Design related to Oil and Gas Plant and Industrial Gases Plant.
- Proficient in using CAD Systems both 2D and 3D Modeling.
- CADWorx Plant Professional (Piping, Equipment, Steel, Spec. Customization)
- Bentley-Rebis Auto Plant (Piping, Equipment, Isometric, Spec. & Catalog Customization)
- AUTOCAD 2010-2000
- Micro station
- Net plant wave for extraction of GA.
- Project wise Navigator & Navis work
- Proficient in Microsoft Office : Access, Project, Excel, Word
- Highly cooperative and works under pressure

Training
- Professional Course On Piping Design From
Design Techniques, Bangalore.
- Plot Plan
- Equipment Layout
- Piping Isometrics
- Pipe routing concepts
- MTO and Wall Thickness Calculations
- Stress Analysis
- 3 D Modeling of Piping & equipment in AutoCAD.
- Ability to read P& ID Diagram of any Process plant.
- Preparing of line list.
- Pump Piping exercise.
- Conversant with Piping & Fitting Standards.
- Pressure Drop Calculations.
- Slope Calculations.
- Preparation of nozzle orientation plan.
- Piping Rack study.
- Study of underground piping layouts.
- Preparation of isometric & orthographic piping views.
- In-plant Training in Production Department from
C.T.T.C, Bhubaneswar
- Project on “Manufacturing of Key Ring Mould”
- Conventional Turning
- Conventional Milling
- Conventional Grinding
- CNC Milling & Turning
- Boring & Counter boring operations
- In-plant Training in Production Department from
C.T.T.C, Bhubaneswar
- Project on “Manufacturing of Press Tool”
- CNC Turning
- CNC Milling
- Conventional Grinding
- In-plant Training in Spinning and Textile Department from
Kesoram Rayon
- Project on “Modification of Process Equipments to accommodate up to 10% excess Production”.

Software credentials.
Languages : C++
RDBMS Package : Oracle8i
Design Packages : Autocad
2d Drafting
Autocad
Productivity Tools
3d Modelling
Auto plant : Catalogue & Specs. Customization
Creating new components with standard dimensions required for modeling
Creating new specs. for modeling
Working with Class Editor
Report Generation
Modeling
Equipment
Piping
Isometrics
Pdms : Catalogue & Specs. Customization
Creating new components with standard dimensions required for modeling
Creating new specs. for modeling
Working with Class Editor
Report Generation
Modeling
Equipment
Piping
Isometrics
Projects

B.TECH
- Core and Cavity Extraction and Tool Path Generation of
- Ice tray using CATIA V5R12, from Mantra Udyog Bhubaneswar in 2006. The aim of the project is based on mould design of ICE TRAY. Part Modeling Of the Component
- Core Cavity Extraction of the Mould in Core and Cavity Workbench Tool Path Generation using Master Cam by importing the component From Catia..
- Core and Cavity Extraction and Tool Path Generation of Ecobay Housing, A product of Philips Company, acts as an insulator using PRO E software from C.T.T.C. Bhubaneswar in 2005.
- Mould Design of the component
- Part Modeling
- Core Cavity Extraction
- Tool Path Generation Using Master Cam software
Personal details
Husband’s Name : Mihir Ranjan Mohapatra
Date Of Birth : 01.01.1985
Sex :
Religion : Hindu.
Nationality : Indian.

Declaration
I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Place: Hyderabad
Date: Namrata Mishra

[Guest-IJT]

piping engineer

BHARAT KHANDEKAR
To take up an assignment that will provide higher career growth through continuous learning process, hard work and stimulate me professionally and intellectually.
COMPANY NAME- BRIDGE AND ROOF CO. (INDIA) LTD. DESIGNATION - Site Engineer
DURATION - July-2009 to till date

Projects handling
- Utility piping for NHT/CCR FIRED HEATERS
- Coils fit up and erection for NHT/CCR FIRED HEATERS.
- Managing QC works (NDT+ Smoke test)
- Commissioning assistance in NHT/CCR heaters.
- Offsite piping for crude tank area in G.G.S.R. Bhatinda.
Responsibilities included
- To proper fabrication and erection of pipes.
- To check the work according to E.I.L. and other (UOP) standards.
- Material planning for piping of all heater utility piping.
- Provide assistance in pre-commissioning and commissioning activities.
- .Welding and fit up inspection of pipes.
- Manage the modification in piping work as per requirement on site..
- Manage the hydro test of coils and loops.
- To check the loops and their drawings according to the P&ID.
- Draw As Built drawings as per the requirement.
- To arrange all QC related works on fie

Academic Qualification
Degree Board/University Passing Year Percentage
B.E.(MECHANICAL) R.G.P.V. Bhopal(Indira Gandhi Govt. Engineering collage sagar) 2008-2009 65.6%
Higher Sec. School Kendriya Vidyalaya bina 2003-2004 56%
High School Saraswati shishu mandir Bina 2001-2002 83%

Computer Qualification
Operating SystemWIDOWS XP, Basic, MS Office, Internet

Extra curricular Activity
- Attended 3 “NCC” CATC camps.
- Having “NCC” C certificate.
- Having LEVEL-II diploma in RT.
- Won second price in district level school badminton championship.
- Vice caption of intra collage cricket tournament team.

- Name : Bharat khandekar
- Date of birth : 10th July 1986
- Father’s name : Shri. M.B. Khandekar
- Mother’s name : Smt. Mukta Khandekar
- Passport No. : H7145034
- Languages : Hindi, English & Marathi

BHARAT KHANDEKAR

[sijusamuels@yahoo.com]

SIJU SAMUEL
Email : sijusamuels AT yahoo.com
o b j e c t i v e
_________________________________________________________________
- To work with a progressive organization in which I can contribute my management & technical skills and at the same time achieve the organizational objectives with the attribute of time, quality and discipline.
- Obtain a responsibility-providing job that will challenge more of my capabilities.
- To be part of a company which believes in its people and promotes their growth and development.

a c a d e m i c s
_________________________________________________________________
- BE–Mech (Bachelor degree in Mechanical Engineering, Visveswaraiah Technological University,Belgaum,India.) (2008)
- Higher Secondary Examination (Higher Secondary Board of Kerala, India.)(2002)
- Matriculation (SSLC from Board of Examinations, Kerala, India) (2000)
e x p e r i e n c e s
________________________________________________________________
19 months of experience in the field of construction as below

- Organisation : Nasser S Al-Hajri Corp.
Client : Technicas Reunidas Gulf Co. Ltd
Position : Piping Engineer
Period : 21-04-2009 to 16-10-2009
Project Name : Saudi Kayan Phenolics
Place : Kingdom of Saudi Arabia
Responsible : Planning the work,monitoring the progress.
Client : Technicas Reunidas Gulf Co. Ltd
Position : Qa/Qc Engineer(Piping)
Period : 17-10-2009 to 03-11-2010
Project Name : Saudi Kayan Phenolics
Place : Kingdom of Saudi Arabia
Responsible : Cordinating the inspection activities.
-
C o m p u t e r s –
Microsoft Word,Microsoft Excel
Mechanical softwares : AutoCAD,ANSYS,Capsturn and Capsmill
a p t i t u d e
_________________________________________________________________
- Good communication skills.
- Very creative. Strong analysis, design, development and implementation skills.
- Efficient Time management.
- Team Oriented.Confident,Presentable & Ability to work as an efficient team member
- Quick to assimilate and integrate. Learn new things fast and implement them as well.
- Open to advice and new ideas for improvement and advancement.
- Goal Oriented. Work for results.

[Guest]

VIKAS VERMA
Email :
Vikasverma6060 AT gmail.com

Objective :
To make learning a lifelong process and endeavor to further my family values. To constantly keep upgrading myself for the benefit of the self and of those associated with me.

Educational Qualification :
- Completed 10TH with 90.06%. from S.M.B GITA SEN. SEC. SCHOOL, KURUKSHETRA BY H.B.S.E Board in 2008.
- Completed DIPLOMA in Chemical Engg. (Pulp & Paper) from Seth Jai Parkash Polytechnic, Damla Yamunanagar With 80%.
Project Undertaken :
1.Minor project : “Evaluate the different parameter of cooked baggase
pulp”.
2. Major project : “Manufacturing process of Sugar”.
Training :
- 6 weeks Summer training at BILT PAPER MILL, YAMUNA NAGAR (Haryana).

Seminar :
- I gave a seminar on Chemical Recovery & Paper Making in the college
Computer Proficiency :
- Basic knowledge of computer.
Personal strengths :
- Comprehensive problem solving & decision making abilities.
- Hard Working, Well Disciplined & Self Confident person.
- Positive Thinking

[Guest]

RESUME
R.RAJIV GANDHI,
e-mail :rajivhce85 AT gmail.com


OBJECTIVE :
To build a career in a very challenging environment, where I can realize and improve my skills and strive for excellence.
EDUCATIONAL QUALIFICATION :
Institution Qualification Year of completion Marks in Percentage
HINDUSTAN COLLEGE OF ENGINEERING B.E - MECH 2010 73
SWAMY ABEDHANANDHA POLYTECHNIC COLLEGE DIPLOMA 2007 92.5
GOVERNMENT HIGHER SEC. SCHOOL 12th 2003 65
GOVERNMENT HIGHER SEC. SCHOOL 10th 2000 50
EXPERIENCE :
- Employer : VALE PROJECT SERVICE (TERMAX LIMITED)
- Designation : PIPING DESIGN & CHECKING ENGINEER.
- Employed Since : 1Years 6 Month.
- Involved in the following Project Works :

- MADRAS CEMENTS LTD., R.R NAGAR, VIRUDUNAGAR (1 x 25 MW).
- SESA GOA LIMITED, BICHOLIM, NORTH GOA. FICHTNER CONSULTING ENGINEERS (INDIA) PVT. LTD. MUMBAI (1 x 30 MW).
- MADRAS CEMENTS LTD., ARIYALUR, TAMIL NADU (1 x 40 + 20 MW).
STEAM & HOT WATER BOILER : (Thermax)
- Preparing Proposal & Execution P&I Diagram, Process flow diagram, Schematic diagram.
- Preparation of Plant Room Layout & Foundation Layout.
- Design of Piping & Routing arrangement and pipe supports.
- Design & drafting of Structural Supports Drawing.
- Checking of Isometric Drawings & Supports Drawing.
RESPONSIBILITIES / KNOWLEDGE & SKILLS :
- Study constructs ability and technicalities and gives feedback to Project Manager.
- Study drawing specification, Bill of material, etc. and understand the scope of work.
- Preparation of Boiler House Layout, Plant Layout.
- Preparation of Complete Foundation layout and structural drawing for Boiler and other equipments.
- Preparing Proposal & Execution P&I Diagram, Process flow diagram, Schematic diagram.
- Site layout, Equipment layout, Trench layout.
- Extraction of Fabrication Isometric and Orthographic Drawings from Piping Layouts.
- Preparation of Piping Bill of Material.
- Preparing complete ISO Metric drawing and Piping supports.
SOFTWARE SKILLS :
- Operating systems : Windows Xp, Windows Vista.
- Application Software : Microsoft Office 2003.
- Design Software : Auto Cad 09.
- Analysis Software : ANSYS ver11.
- 3D Design software : Pro-E V5.
- 3D Design software : CAESAR –II.
AREA OF INTEREST :
- Computer aided Design & Analysis.
ELECTIVE PAPERS :
- Automobile Engineering.
- Marketing Management.
- Refrigeration and Air Conditioning.
PROJECT UNDERTAKEN :
- Automatic Side Stand For Release.
- Performance Increase in Air-Conditioner.
- “Prevention of Scales in Condenser tubes” at Naively Lignite Corporation.
INDUSTRIAL VISIT :
- Ashok Leyland, Bangalore.
- Bharat Earth Movers Limited, Mysore.
- Integral Coach Factory, Chennai.
- Chennai Port.
- Milk Chilling Plant, Cheyyar.
- Naively Lignite Corporation, Naively.
OTHER ACTIVITIES & HOBBIES :
- Reading books.
- Listening Music.
- Playing cricket.

[ahmedhafeez036]

Dear Sir/Madam,
I am very keen to apply for the above job.
I am an ambitious BE graduate, holding degree in Mechanical Engg (Year
2010). I have attached my detailed resume herewith. I am looking for a
challenging career, where my technical knowledge and analytical skills
are utilized. I have the confidence that, when given me a chance, I
will work up to the expectations of your organization.
Here is my resume :
HAFEEZ M.A
e-mail : ahmedhafeez036 AT gmail.com
Career objective :
To secure a technically challenging position in OIL,GAS AND PETROCHEMICAL industries, where there is ample opportunity to learn, work in a challenging team so that my analytical and interpersonal skills are utilized.
Key Strength :
- Highly dedicated towards work.
- Excellent analytical, interpersonal, communication and leadership skills.
- Strong organizational skills and adaptability with new technology.
- Proven abilities to meet deadlines and work under pressure.
Snapshot :
- Professional with a graduate degree in Mechanical Engineering.
- Currently working at Elite Engineering Industries.
Technical skills :
- CAD/CAE : Solid Edge, Ansys
- Other Tools : MS-office
- Operating System : Windows XP/Vista
Experience details :

Organization : ELITE ENGINEERING INDUSTRIES.., Mangalore.
Contract : MANGALORE REFINERY AND PETROCHEMICALS LTD. (MRPL)
Role : PIPING ENGINEER.
Duration : JULY 2010 to till date
Responsibilities :
- Supervising pre-commissioning activities such as hydro testing, water flushing, air and steam blowing, re-instatement.
- Identifying equipment location as per general arrangement drawing and prepare layout and measurement. Check installed piping components as per P & ID.
- To carry out reinstatement of piping and report preparation like installation of valves, remove temporary piping, remove temporary valve, remove blind, insert original gaskets, install plug or cap at discharge point if removed, install the mesh of strainer.
- To check and prepare orifice flange inspection and pipe flange alignment report.
- Line checking, punch listing &clearing.
- Inspection of Instruments installed in Pipe lines are control valves, temperature transmitter, pressure transmitter, flow measuring differential transmitter, rotary equipments etc.
- To ensure that all method statements & procedures, installation manuals and ITP’s related to mechanical and piping works comply with project specifications, local regulations and meet the requirements of international codes and standards.
- To supervise fabrication and erection of pipe spools and pipe supports as per latest issued for construction drawings and ensure that project specifications and standard codes were correctly executed.
- To prepare the documents for the QC activities and Test Packages. Updating all QC activities and prepare the Test Packages Status and Progress reports.
- Preparation of internal punch list and clearance inspection during fabrication. Co-ordination with civil/ construction departments for testing/ backfilling activities.
- Maintaining of all inspection report and related documents in QA/QC department, Co-coordinating with main contractor, third party and client.
- To perform Inspection, approval of fit-ups & welded joints and dimensional as per isometric and specifications.
- To perform welding inspection to ensure that all welding activities are properly executed.
Academic profile :
- Bachelor of Engineering (B.E.) in mechanical Engg from Vivekananda College Of Engineering & Technology, Puttur under the Visveswaraiah Technological University (VTU), Belgaum, Karnataka in 2010.

Academic Project :

PROTOTYPE MECHANISM OF PNEUMATIC POWERED CAR :

- It was academic project comprising four member team, executed as part of the graduation.
- In this project compressed is used for generating pneumatic power to drive a vehicle.
- In this project reciprocating action of piston is converted into rotory motion by cranking method.
- My role involved requirement gathering, consulting the domain experts and handling the project presentation etc.
Academic seminar :

SOLAR POWERED VEHICLE :
Presented a seminar on the solar powerd vehicle. These vehicles use sun's energy as the source of power and solar array as the main component in such vehicles consisting pv cells. This pv cells converts the sun's energy into electrical energy. This electrical energy is passed to motor to run the vehicle through a device called power tracker.
Other details :
- Undergone training on CAD/CAE softwares such as ANSYS, Solid Edge.

[harry_thaker@yahoo.com]

Dear Sir/ Madam
Please accept this letter and the accompanying resume as an expression of my interest in a position with your organization.
As my resume indicates, I had passed my Diploma in Civil from Bhailal Bhai and Bhikabhai Polytechnic V.V.Nagar in 2001. I have also done my Electrical Wire man course. I would like to begin employment with an organization in which my effective performance will be met with recognition and growth.
I have acquired a sound overall knowledge of leading edge engineering principles, tools, and practices with emphasis on Civil Construction technology, testing of Materials as per standards & inspection of civil work related standards of engineering practices. I have clear the Examination from IRCA Certified QMS Lead Auditor Training Course (Based on ISO 9001 :2008) Organized by TUV India (Nord) Pvt. Ltd. Currently I am working with “Ram Agri Infra India” which is largest land developing company its H.O. at in Ahmadabad. Here is my duty is to check new and Current projects Status and to gat the dpr by site engineer and direct reporting to C.M.D. also responsible for site progress is in time and With Quality; To get the drawing from Drawing section of our Company and make a estimate for the project also Given the Work to my junior engineer as per them ability.
My personal attributes include leadership, sound judgment, and creativity, analytical and troubleshooting skills. I interact productively with people from diverse backgrounds. I have a career history of achieving employment goals.
I am certain I can make significant contributions to your organization, and would welcome the opportunity to meet with you to discuss how my education and abilities might best be employed by your organization.
Thank you for your consideration, I look forward to your response.

RESUME
Haresh Thaker
Email : harry_thaker AT yahoo.com

- : PROFESSIONAL SUMMARY:-
Extensive experience over 13+ years with construction supervision, inspection and quality control of pipeline projects, civil works, water retaining structures and industrial projects, quality and quantity assurance & planning with estimation.
Professional & Educational Details
Skills Team Handling, Project Management With
Quality of work and other technical skills Like Field and Laboratory testing of material and work as per specifications’; And In Computer Knowledge Of Microsoft Word/Excel.
Industry Building Construction, Pipeline Project, Power Plant, Mobile Tower; Industrial Project for Hindustan Zinc at various locations in India. Implementation of QA/QC Plans with monitoring of Projects & same for Execution work.
Category Construction for All Kind of Civil Projects
Currant Designation Project Manager
Currant Employee Chiripal Group of Company
Highest Degree Held Civil Engineering in Diploma 2001 and lead Auditor ISO 9001—2008;
Electrical Wireman.
- : Present employee:- Chiripal Group, Ahmedabad.
Designation :-Project Manager
Duties Involved :-
- Preparation of BOQ for Site Work.
- Work Order and Estimation work prepare.
- Approval for Billing of Contractors.
- Whole Project Monitoring.
- Meeting with Contractor/Consultant/And H.O.(C.M.D)
- : Previous employee:- “Ram Agri Infra India Pvt Ltd.” Ahmadabad.
Designation :-Chief Engineer.
Duration : June 2010 to August 2011.
Duties Involved :
- Make the Project repots for Site.
- Daily inspection at and instruction to senior and Junior Engineer regarding the Site related to work at site.
- Check Indent Register, Daily Reports, Progress Reports, Drawing from Structure Engineer Etc.
- Reporting to C.M.D for the Site and about Progress Reports.
- : Previous employee:- “SGS India .Pvt. Ltd.” Ahmadabad Branch:-
Designation : Team Leader
Duration : Feb 2006 to June 2010
Duties Involved :
- Monitoring as a Team Leader for Hydro Power Plant Project at HIMANCHAL PRADESH from NCC(Client) at Jeori HSPPL.
- Check the work as per IS and as per QAP also checking of the materials. And follow the instruction of Project Manager.
- Sending day to day reports to Project Head of My Company also require suggestatations also.
- Monitoring on junior staff and given training for Compliance report for client with
- Performance standards and customers requirements.
- Work related training given to Junior Staff and Same as for Safety equipment and its use also.
- Client : “Shree Cement (Rajasthan)” 3X18MW CAPTIVE Thermal Power Plant.
Duties involved :
- Planning and monitoring expansion of Project.
- Quality inspection of Boiler Plant, ash handling plant, DM Plant as well as cooling tower.
- Day to Day checked the progress of Chimney work.
- Make DPR for the work and quarries reports sending to project Manager and fallow instruction by them.
- To implement the quality systems in various related contractor’s work to ensure proper compliance to quality norms.
- Construction supervision, review Mix-Design, field investigation of raw material.
- Collect fortnightly progress reports, progress updating and monitoring Procedure.
- Client : GWRDC and GWRI (Jalundra Sujalam Suflam Spreading Pipeline Project of Narmada Water Supply and Department)
Duties Involved : For Pipe Line and Other Projects.
- supervision of pipeline trench, bedding alignment and level checking as per L.S. and alignment, map installation of appetence, Grunting and lining inspection.
- Day to day supervision of construction activities at site. This includes pipeline laying, pumping station, water retaining structures etc.
- Point out deviation from the specification as observed at site. Updating about day to day status report.
- Review of quality assurance plan/drawing, specification and concrete Mix-Design.
- To check various lab test and field test in soil, concrete and other necessary documents.
- Overall co-ordination & liaison with Govt-official (Client) & contractors.
- Attend program & review meeting & Suggestion given to client as & When Require.
- Inspection Services of Expansion project of (72X2mw) Captive power plant Hindustan Zink Expansion Project at Hindustan Zink Limited, at Rajasthan.

- : Other Project Inspections from SGS:-
- Cell phone tower Inspection at Rajasthan and Gujarat for TATA Company.
- Checking site for Foundation work and structure details and checking other site related drawing and given suggestation and instructions.
- Execution and Inspection of Foundation and Installation work for Mobile Tower And Its Shelter.
- : Flood Protection Earthen Embankment:-
- Also experiences in “restoration and strengthening of existing flood protection’’ earthen embankment on the bank of river Tapi. There was my role as a Team Leader.
- Execution and Inspection of excavation; Lineing work of Rubble with using of Gabions which is different size and different weights also check the quality of Gabions.
- Check the level as per L.S. and QAP.
- Given the DPR to Project Head and follow them instruction.
- : Previous employee:- “ Ganesh Housing Corporation L.T.D.’’ Ahmadabad:-
Designation : Senior Engineer
Duration : Feb 1998 to January 2006.
Duties involved :
- Examine plans drawing and site layouts for new buildings, buildings
- Renovation and other proposed structure.
- Inspection construction of building and executing as per drawings, specifications, building code.
- Inspection of steel framework, concrete framework, reinforcement of processed concrete to ensure quality standard and to conformance to Specification and building codes.
- Inspect existing building to identify and report on structural defects, fire hazards and other threats to safety.
- Develop and implement quality programs with documentations for ISO Certifications.
- Prepare progress report and progress schedules to clients.
- Construction site in charge in execution of multiplex building
- Regular supervision of work for progress and quality
- 10. Maintaining financial as well as technical records.
- Planning of manpower, material and deployment

[Guest]

Full Name : PATEL VIRAL PRADIPBHAI
Career Objective :
My objective is to hone in my skills for comprehensive personality development and be an epitome of trust and reliability in the corporate world. My prime goal is to understand professional environment and capitalize on opportunities.
Qualification :
Degree Board/University Year of Passing CGPA/Percentage (Aggregate)
Advanced P G Diploma in Piping Design And Engineering Maharashtra Institute of Technology, Pune. 2013 Pursuing
B.E.
MECHANICAL Gujarat Technological University, Gujarat. 2012 6.81 CGPA
HSC (12th Standard) GSHEB 2008 62.80 %
SSC (10th Standard) GSHEB 2006 72.86 %

Additional Qualification :
(a) AIEEE (Qualified) central board of education,delhi,2008.
Computer Skill sets / Software Proficiency :
(a) AVEVA PDMS (Plant Design Management System)
(b) CAESAR II
(c) MS-Office, Windows-XP,7
(d) AUTOCAD

Industrial Visit (2013) :
(a) COMPANY NAME : SOMESHWAR DISTILLARY , PUNE , MAHARASTRA.
(b) SUBJECT : PIPING STUDY.
Projects Accomplished :
(a) Project Type : Self Sponsored
(b) Name of company : LUNAR ENGINEERING WORKS
(c) Project accomplished at : Degree
(d) Project Name/Title : Design and fabrication of injection moulding machine.
(e) Project Details : We have study the whole injection moulding machine.

Industrial Training/Internship Done :
(a) Name of company : Lunar engineering works
(b) Training Duration : 30 Days
(c) Training Subject : Study about injection moulding
(d) Location : Udhna, Surat, Gujarat
Personal Skills and Strengths :
(a) Responsible
(b) Trust worthy
(c) Dynamic
(d) Punctual

Personal Details :
(a) Date of Birth : 08/10/1990
(d) Email Id : viral.6092 AT yahoo.com
(e) Languages Known : English, Hindi, and Gujarati.
(f) Passport : Yes
(g) Passport Validity Till : up to 05/2021
(h) Marital status : Single
(i) Permanent Address : Utran, Surat-394105, Gujarat, INDIA.
(j) Current address : Kothrud, Pune-411038 ,Maharastra, INDIA.