www.aproctek.com Atharva ProcTek Pvt Ltd Pune : PROCESS ENGINEERING DESIGN Training

[aproctek]

PCE-01 PROCESS ENGINEERING DESIGN

India's Best Personalized Professional training Courses

Unfortunately, there exists a wide gap between the expectations of the industry from the academics and what knowledge is actually imparted during graduation and its effectiveness. Due to high attrition rates or otherwise, the engineering companies are increasingly unwilling to impart the basic training in process design and are instead expecting that the fresh engineering students have prior knowledge in process engineering design. The design courses developed and delivered by us focus on delivering what is industrially relevant. With our wide process engineering experience in chemical, petrochemical and Oil&Gas areas, we know what the exact expectations of the industry are from the chemical engineers to be able to work as Process Engineer. Apart from the best quality of the training that is ensured in this course, it also provides a specific direction for the student to tackle with the 'unknowns' that one can always expect to come across while working on a project.

The knowledge in process design is helpful for process engineers working in the engineering, operations and HSE alike. Similarly, sound knowledge in process engineering design can help the engineers working in supervisory and managerial capacity.

A wide range of topics covers in the course is described below.

*

Guidance for interviews
*

Introduction to Material and Heat Balance
*

Introduction to Process Flow Diagrams (PFD) development
*

Line sizing for various services
*

Basics of pipe selection and of mechanical design of equipment
*

Introduction to Piping and Instrumentation Diagram (P&ID) development
*

Introduction to Cause and Effect diagrams (Trip – Interlock schedule) development
*

Instrumentation and process control
*

Selection, sizing and specifications of various process equipment such as pumps, compressors, distillation columns, heat exchangers and multiphase separators
*

Sizing of control valves, restriction orifice plates, pressure relief devices
*

Introduction to the contents of Basic Engineering Package (BEP)
*

Sizing of various utilities and selection
*

Introduction to HAZOP Review
*

Special aspects of design of batch and continuous processes
*

Introduction to process simulations
*

Heat exchanger design
*

Vacuum systems
*

Introduction to Hazardous area classification
*

Process Safeguarding

We invariably end up covering a lot more than the topics listed above. The problem assignments covered during the training are directly relevant to the industry.

Duration:

*
Full time batch: Approximately 30 Working days
10 a.m. to 6 p.m.

Joining schedule: One can join at any mutually convenient time.

Who can join? Degree or Diploma holders in Chemical Engineering. This course would also be useful for mechanical engineers who have spent significant time in process industry.

Placement Assistance: Being involved in engineering activities ourselves, we can provide full active placement support even after completion of the course.

Registration/Enquiry:

Please visit www.aproctek.com/html/RegistrationForm.html for online Registration/Enquiry Form. Alternatively, you can download the Registration form.

Due to popular demand, we have now introduced an extension to this course by name of PCE-01A. This course will be offered to those who take the course PCE-01 and want to get more insight to producing various Process Engineering deliverables. For more details of this course, please click here.

Who's trained with us? : For you information, those who participated in various training programmes offered by us have worked with various reputed organizations from India and abroad. You can refer to a brief list of such organizations from India and Abroad from our website. We are sure you would not like to be left out.

Submit Online Course Registration/Enquiry Form from our website www.aproctek.com/html/RegistrationForm.html before making the enquiry.

Location: Karvenagar, PUNE 411052 Maharashtra India
Phone: +91 20 30228780
E-mail: training@aproctek.com, aproctek@gmail.com
Training Course Details: www.aproctek.com/html/TrainingCourses.html
Online Course Registration/Enquiry Form: www.aproctek.com/html/RegistrationForm.html

Atharva ProcTek Private Limited
Phone : +91 20 30228780
+91 20 25431564
E-mail : response@aproctek.com
Website: http://www.aproctek.com/

[Guest-IJT]

Name : ANUBHA
Email : anubhabhu AT gmail.com
Designation / Skillset : AGRICULTURE FINANCE OFFICER
Please find enclosed herewith

Resume :

OBJECTIVE
Seeking a challenging position in a dynamic and progressive organization, which will provide me an opportunity to apply and enhance my technical and analytical skills to achieve the company’s standards and target and take challenging, creative and diversified projects.
WORK EXPERIENCE
Central Bank of India - at Betul, (M.P.)
Working as Agriculture Finance Officer
Duration : - 08th Feb. 2010 to till date
Responsible for Agriculture advances of main branch B/o - Betul along with all branches of same district.
Responsibilities
- All Priority Sector and Non Priority Sector advances.
- Responsible for all Govt. sponsor scheme financing.
- Monitoring and follow NPA accounts, Write-Off account.
- Attending BLBC, DLBC meeting.
- Preparing Farmer Club.
- Preparation of Weekly wire format.
- Preparation of DROP statement.
- Grading of Self Help Group.
- Preparation of Monthly Control return.
- Coordination with operations department.
- Also look into Saving department, Cash department.
- Responsible for issue of Bank Gaurantee.
- Ensure technical support to the management by Time management of activities/resources, progress monitoring & report areas of concern on regular basis to keep in control of risk management & quality management.
SPECIAL ACHIEVEMENT
- Successful completion of audit of other branch.
SKILLS ACQUIRED
- Excellent command on MS Excel, MS Word, MS Power Point.
THESIS UNDERTAKEN
- Completed Thesis on Performance of Certain Gamma Rays Induced Mutant of B.campestris in M.Sc.
EDUCATION
- M.Sc. (Agriculture) with 91% marks in 2010, Dept. Genetic and Plant Breeding from Banaras Hindu University, Varanasi (U.P.)
- B.Sc. (Agriculture) with 84% marks from Jawaharlal Nehru Krishi Vishwa Vidhalaya, Jabalpur, (M.P.)
- HSC with 74 % from Women College, Hajipur, Bihar.
- SSC with 63 % from Govt. Girl’s School, Hajipur, Bihar.
TRAINING
- Six Months : In Krishi Vigyan Kendra, Betul, (M.P.) during B.Sc.(Agriculture)
- Six Days : In Bankers Institute of Rural Development, Lucknow
- Twelve Days : In Central Bank Officers Training College, Bhopal
- Four Days : In Mahatma Gandhi Rajya Gramin Vikas Centre, Jabalpur
AWARD RECEIVED
- Gold Medal in B.Sc. (Agriculture)
- Gold Medal in M.Sc. (Agriculture) in Dept. Genetic and Plant Breeding
- Gold Medal in M.Sc. (Agriculture)

Place :
Date : ANUBHA
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4452240
Date & Time : 6th Aug 2011 12:48 PM (UTC)
IP Address : 59.95.106.115
Browser Info : Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.107 Safari/535.1
Predicted Country : India

[Guest]

Snehal P. Rawool
Email- moonshine.nehal AT gmail.com
HOBBIES & INTEREST
- Learning new things
- Cooking

OBJECTIVE
To launch my career as a competitive professional. I am looking forward to associate myself with an organization that provides an environment to share, contribute and upgrade my knowledge for development of self & organization.
EDUCATION
Diploma of Electronics and Telecommunication Engineering from Mumbai University.
EXPERIENCE
Company : JAYSHREE ELECTRON PVT. LTD.
Profile : An Indian Company engaged in the operations encompassing the manufacturing of Control panel for Bajaj Auto Ltd., Tomas for Germany, Energy meter for Punjab. Sensor like optical, capacitive,
Magnetic & also colour sensor.
Duration : 10 months.
Designation : Production Assistant.
Dept. : Production.
Job Responsibility :
- Worked at testing stage like sensor testing, trouble shooting.
- Find the root cause & resolving quality related problems.
- Give the best outputs & quality to our customers.
- An efficient team player with strong analytical, problem solving & organisation abilities.
- Feasibility study of New Product & Modification.
Company : Kinetic Communication Limited, Pune
Profile : Kinetic communication ltd. Chinchwad (TS-16949) is certified company by UL India ltd. Its EMS Division offers wide range of electronics services to clients & is engaged in manufacturing of PCB assembly.
Duration : 1 Year 6 Months.

Designation : Assistant Engineer.
Dept. : Engineering
Job Responsibility :
- Doing feasibility study of New Product & Modification.
- Leading CFC (Cross Functional Team) for new projects as per APQP Procedure.
- Expertise in creating BOM& ERP system for all activities.
- Detail Preparation Support of all the documentation required for the new projects like Part List, BOM, Component layouts, Schematic, Pre forming data & Work Instructions.
- Prepare and maintain all project related documentation including the Pilot reports, Engineering run reports and the resource tracking.
- Documents preparation – PFC, PFMEA, and Control plan for all new projects.
- Handle all types of technical process till the customer end.
- Approval & Review of ECR / ECN, Conducting monthly & weekly meetings with all concern dept.
- the production for line setup, Line-layout for the new products.
- Co-ordinating T-S Audit & NC closing for engineering dept.
- Studying Time cycle at Assly line, root cause analysis, Customer Complaints, Implementation & Maintaining documents as per ISO 9001 :2000 Quality Management System.
- Knowledge in IPC-A –610, Mil STD -883 norms standards, Keizen, Poke- Yoke & why-why analysis.
- Familiar with Lead free Manufacturing process.
- Handling Projects for various customers like Minda, Rinder, BHTC, Megatech & Emerson.
EDUCATIONAL BACKGROUND
Exam College / Institute University / Board Year of Passing Percentage Achievement
T.Y(Diploma)
D.Y.Patil,Pune
M.S.B.T.E 2009-10 58.00% Second Class
SSC (10th ) JKP, Pune Pune Board 2005-06 79.46% Distinction
ACADEMIC PROJECTS
1. Diploma Project Title : “Petroleum Tank Gauging with serial Interface”
SOFTWARE EXCELLENCE
Type Technology Tool(s)/Language(s)
Engineering Software
C, C++ Languages.
Computer Skills MS Excel , MS Word, other presentation tools and other communication tools viz. - e- mail, ERP System etc.
Operating Systems
Windows 98/2000/XP/7
STRENGTHS
- Determined to achieve goal.
- Good technical knowledge with practical experience.
- Effective Communication skill and leadership qualities.
- Highly motivated to work as a team member.
- Adjustable to any environment.
DECLARATION
I hereby declare that all the details furnished above are true to the best of my knowledge and belief.
Date :

Place : Pune. Rawool Snehal Prashant