Quality Engineer Pune : www.forbesmarshall.com Forbes Marshall

[muthukalee]

Quality Engineer Pune : Forbes Marshall

Code : SEG
Designation : Engineer Quality
Department : Quality Assurance
Location : Pune
Education Qualification : B.E (Mech /Chem)
Total Years Experience : 3-8Years
Job Description :
1To Inspect all the incoming material and decide whether it is acceptable or to reject the same.
2. Will have to do vendor rating and also visit vendors to check the quality aspects..
3. Periodic vendor audits.
4. Inspecting in process boilers and gather data for TDPU / Six Sigma calculation
5. Analyze data and then handover the same to production and purchase for system correction
6 Inspect Boiler ready for dispatch and then give dispatch clearance
7. Knowledge of Boiler production and some site experience is preferred.
Soft Skills (eg.communication) : Good communication skills. Along with pleasing personality and strong convincing & negotiation skills.
Computer Proficiency (Skills) : Adept in Oracle ERP system, MS Office.

Email responses To: vnayyar@forbesmarshall.com


About us :
For over half a century, Forbes Marshall has been building steam engineering and control instrumentation solutions that work for process industry. Forbes Marshall's goal is to provide solutions in Energy, Efficiency and Process Automation, using the best technology the world has to offer. 50 years ago we started out with steam generation solutions. Today we are comprised of twelve business divisions; most of them partnering with the world technology leaders in respective fields, manufacturing products that cover the entire spectrum of energy generation, energy efficiency, control and instrumentation for the process and power industry.

Contact us :
P B # 29, Mumbai-Pune Rd.,
Kasarwadi, Pune 411 034
DID : 91 (0) 20-27149012
Tel : 91 (0) 20-27145595 / 39858555
Fax : 91 (0) 20-27147413
Website : www.forbesmarshall.com

[Guest]

Dear Sir/madam,


Myself is PARMESHWAR MANE completed B.E. in mechanical engg. and having 2 Yrs experience in quality Department

If any vacancy is there pls inform me

Regards,

MANE P
Mob.No.

[Guest]

RESUME
MAHENDRA DILIP PAWAR
E-mail address : mahindrapower AT yahoo.com
CAREER OBJECTIVE : -
To associate with an organization that helps me to specialize and purse a career. My qualification, skills and experience give me an opportunity to learn the new state of the art technologies and to dispose my objective with utmost sincerely and dedication with complete commitment.
Total Experience : 10 Yrs.
EDUCATINAL QUALIFICATION :
EXAMINATION YEAR OF BOARD DIVISION
PASSING
Dip. in Mech. Engg.
(D. M. E.) JUNE, 1998 MUMBAI FIRST
S. S. C. MARCH, 1993 MUMBAI FIRST
PROFESSINAL QUALIFICATION :
Completed Following NDT-Courses
- ASNT Level –II in Liquid Penetrant Test,
- ASNT Level –II in Radiographic Test (Interpretation).
- ASNT Level –II in Visual Examination.
WORK EXPERIENCE :
PRESENT ORGANISATION :
- From July 2006 to Till Date with M/s. Enpro Industries Pvt. Ltd. as Senoir QAC and Welding Engineer.
JOB PROFILE :
- To study customer specifications and preparation of QCP for customer like Saudi Aramco, EIL, GE –NP, Kirloskar Brothers, Kirloskar Pneumatics, Siemens, TDPS, STDE, L & T, Shin Nippon Machinery for their export as well as domestic projects.
- To prepare Functional Testing Procedure for Lube Oil Console as per API.
- To prepare NDE Procedures as per ASME Sec. V / VIII Div.1.
- To prepare and qualify WPS –PQR as per ASME Sec. IX, AWS D1.1.
- To prepare and qualify welders as per ASME Sec. IX, AWS D1.1.
- Study the drawings, Quality plan and accordingly carry out in-process as well as overall visual, dimensional inspection.
- To carry out functional testing of system like Lube Oil Console, Dosing Skid and Water Wash Skid.
- To carry out over all ASME related activities for ‘U’ stamp jobs.
Knowledge about welding processes such as SMAW, GTAW, SAW and FCAW.
Also familiar with various codes and standards like
i. ASME Sec. II Part – A, B and C
ii. ASME Sec. V,
iii. ASME Sec. VIII Div.1,
iv. ASME Sec. IX,
v. ASME B16.5, B16.9 and B16.11,
vi. API 614, API 675, API 676, API 5L
vii. TEMA
viii. IS 2062
PREVIOUS ORGANISATIONS :
- From Feb. 2005 to June 2006 at M/s. Jindal Saw Ltd. As Quality Control Engineer.
- From April 2004 to February 2005 date with M/s. Germanischer Lloyds Pvt. Ltd. as Insp. Engineer
JOB PROFILE :
- Carried out inspection of API Line (Welded) Pipes for below mentioned Oman project at M/s.
PSL ltd, Gujarat.
Project : - Water Supply for Bid Bid Fanja & Samail Towns – Phase- I
Customer : - Ministry of Housing – Electricity & water, Sultanate of Oman.
- Also carried out insp. of 3L –Polyethylene external coating & solvent free liquid epoxy
internal coating of pipes for the same project.
- Carried out inspection for Libya project at M/s. Saw Pipes Ltd; Bhuj.
Project : - El Shara- Mellitah Onshore Pipe Line
Customer : - Ministry of Housing – Electricity & water, Sultanate of Oman
- From 15th April 2002 to 8th December 2003 with M/s. Industrial Quality Circle (P) ltd.
as Inspection Engineer.
JOB PROFILE :
- Involved independently inspection of bought out items (raw material) like Pipes,
Plates, Tubes, Pipefitting and fabricated, machined items as per ASME/ ASTM/ ANSI
codes.
- Handled stage inspection like material identification, in process inspection etc.
- Witnessed Hydro test of pipes, tubes and pipefitting etc.
- Witness of check testing like tensile, bend, micro, macro etc.

- From October 1999 to April 2002 with M/s. Alliance Fittings & Forgings as Quality
Control Engineer.
JOB PROFILE :
- In process inspection of material at various stages during manufacturing.
- Final inspection of finished materials.
- Preparing reports on inspection.
- Carrying out physical testing like tensile test & hardness test.
- Also handled inspection, destructive testing related and co-ordination activities with
testing labs, clients and third party inspection agencies.
- August 1998 to August 1999 with M/s. SPIC- SMO Corporation Ltd. as an Apprenticeship
Trainee.
JOB PROFILE :
- Assisting seniors for repair, maintenance & balancing.
- Assisting seniors for hydraulic, pneumatic testing.
- Vernier, Micrometer, Dial Gauges, Bore Gauges, ID Micrometer, Feeler gauges, Screw
Pitch gauge, Radius Gauges, Slip Gauges are used for inspection.
KNOWLEDGE OF COMPUTERS :
- Ms- Office (Ms- Word & Ms-Excel), Adobe- Page Maker & AutoCAD Release-14.

[Guest]

CURRICULAM VITAE
Lad Ashish Ramesh
Email-id :-ashishrlad AT gmail.com

Objective :-
- To work with a world-class company that provides a motivating work environment, in which I can contribute my technical skills to enhance productivity & at the same time achieving the Organizational objectives with the attribute of time, quality and discipline. I want to become successful man in all aspect of life.
Educational Qualifications :-
Qualification Board/ Univ. Name Of Institution Year Percentage
B.E.(E&TC) N.M.U. K.C.E.S’s COEIT (Jalgaon) May-2011 68%
H.S.C. Maharashtra state board Akola art, commerce & science Jr. college Akola Feb-2007 67.33%
Matriculation Maharashtra state board D. R. Patil high school Akola March 2005 63.33%
Technical Training :-
- Completed Post Graduate Diploma in Industrial Automation (PGDIA)
- knowledge of PLC (Ladder Logic, FBD Programming)
- Allen Bradely-RSLogix500 Simulator
- Siemens- Simatic Manager
- messung
- SCADA System.
- DCS-(Distributed control system)
- Completed 15 days training program on “Signal and Telecomm Dept.” at Bhusawal in Indian
Railway .
- Completed Training course on “GIS Solutions For Engineers” organized by JalaSRI-Watershed surveillance & Research Institute, Jalgaon

Project :–
Title :- AUTOMATIC ATTENDANCE SYSTEM USING RFID
The Automatic Attendance System (AAS) consist of an RFID reader, RFID tag, a PC & a server. It involves using the reader to read the tag. Information in the tag is transferred to a database this is later published for people to see in a legible format via method like a web server
The AAS is a possible option for replacing the current attendance methods not only does the AAS take attendance quickly, but also efficiently
IT Exposure :-
- Operating Systems :- Windows 98/2000/XP/Vista/Windows7.
- Assembly Language Programming : -8085(Microprocessor) & 8051(Microcontroller).
- Documentation Tools : -Ms Word, Ms Excel, Ms Power-Point.
Certification of Technical Society :-
- Student Executive Member of IETE (Indian Electronics & Telecommunication Engineer).
- Student Executive Member of ISTE (Indian Society of Technical Education).
Extra-Curricular Activities :-
- Completed certified course in C & C++
- Participated two time in STATE level and one time in NATIONAL level roborace competition
- Participated one time in STATE level and one time in NATIONAL level robowar competition
- Participated in paper presentation organized by the ISTE
- Won 1st Prize in cricket tournament in Annual sports at KCES’S COEIT
- Participated in state level aptitude test, group discussion, question hour, non technical interview & also Participated in state level quiz competition at KCES’s COEIT.

[Unregistered]

VIKAS INGALE
e-mail : ingalevikas007 AT gmail.com

Objective :
In pursuit of carrier enhancing opportunities in the field of :
Quality Assurance & Vendor Development & Utilize my capabilities effectively for organization effectiveness as well as personal development.

Key Skills :
ISO :TS :16949:2009 MSA & SPC Study Process/Product Audit Catia V5R22
PPAP Documentation
PFMEA 8D Problem Solving Tech
Process Improvement SAP Awareness
7 QC Tools Solid Works 2012
Auto Cad

Education :
In Year 2009 Bachelor in Mechanical Engineering from Solapur University (65.68%) Shri Vithal Education & Reasearch Institute’s College Of Engineering Pandharpur.
In Year 2005 Diploma in Mechanical Engineering from Kolhapur University (69.19%) Government Polytechnic, Kolhapur.
In Year 2002 SSC from PUNE Board (78.40%) Swami Vivekananda High school, Gunjegaon.

Work Experience :
BOSCH Chassis System (I) Ltd , PUNE (Since August’2012 ) Sr. QA Executive
BOSCH is German automotive component manufacture with global presence in 28 countries,
BOSCH Pune is mainly dealing with Braking System for Passenger Cars, Utility Vehicles and Light Commercial
Vehicles.The client base of the company Includes Maruti Suzuki, Nissan India, Fiat India & General Motors India etc.
Job Responsibility :
** To ensure inspection of components, raw material and testing of finished goods is carried out as per Quality plan & inspection standards.
** To coordinate with purchase and marketing in handling customer complaints & resolving the same through 8D report.
** To ensure review & implementation of continual improvement activities.
** Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished products.
** To take corrective action & preventive action on the reported non-confirming products for over- all reduction in rejection.
** Attending daily CIP meeting during that discussion on diff. topics which comes under BOSCH agenda.
** Updating diff. quality related document such as IFC report, Quality deviation sheet, QI notification sheet, Daily rejection review, analysis & action sheet, ‘0’km customer complaint calendar.
** Make Critical Examination Reports [CER] for all New Developments.
** Responsible for continual improvement activities to enhance the quality system, such as Kaizen, 5S, lean methods, etc.
** Imparted training program on 5S, 7 QC Tools, Failure mode Effect analysis (FMEA),10 Absolute, Line interventions, Quality alerts, Unusual/Abnormal conditions, Color coding sheet for newly join Trainee to build quality awareness.
** Interface with Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data.
** Support the Quality Inspectors to ensure that products and processes comply with relevant require- ments of the quality management system.
** Assist MR during Internal & External ISO/TS audits as well as preparing work Instructions for all concerned processes.
** Conduct audits, including closing out audit findings, creating audits finding reports and determine proper corrective and preventive actions.
** Create and maintain company quality documentation, such as quality manuals, quality procedures, SPC, PFMEA, MSA & 8D Reports etc.
** Responsible for planning, organizing and managing the overall activities of receiving / outgoing quality functions.
** Manage suppliers’ performance and conduct audits.
** Handling critical measuring instruments Profile Projector, Surface Roughness Tester, Trimos etc.

Trinity Engineers (I) Pvt. Ltd, PUNE (April’2011 to April‘2012) Sr. QA Executive
The company ranked amongst the top automobile forging companies in India, exemplifies High Quality, Quest for Perfection and Innovative approach. It is ONE-STOP SOLUTION PROVIDER, from forging and machined automotive components to production of sub-assemblies as required by the automotive industry. The client base of the company Includes Mahindra & Mahindra, Tata Motors, Ashok Leyland, JCB India etc.
Job Responsibility :
** Responsible for planning, organizing and managing the overall activities Of Receiving / outgoing quality functions.
** Analyze failure, corrective and preventive action to respond to customer Complaints.
** To take lead in development of process quality documentation & WI.
** To monitor and assist the product audit & process audit.
** Monitoring and assisting SPC and MSA.
** Root cause analysis and implementation of corrective action for process related concerns.
** Member of APQP team new part development.
** Guiding to line inspectors as well as new join Trainee about first piece Inspection of components for to build quality awareness.
** Ensuring inspection activity at appropriate stage to prevent defect outflow to subsequent process & customer.
** Handling critical measuring instruments Profile Projector, Surface Roughness Tester, Trimos etc.
** To conduct Quality system audit of vendor end.
** To Prepare and submission of various documents required for PPAP.
** Participating in the internal audit and awareness program organized by the company.
** Responsible for continual improvement activities to enhance the quality system, such as Kaizen, 5S, lean methods, etc.

Promech Automation & System , Pune ( June’2009 to March‘2011 ) Jr.QA Engineer
The company engaged in the Design and manufacture of special purpose Machine supplying to Mahindra & Mahindra , TATA Motors, Volkswagen India, GM India, Daimler India, Ashok-Leyland India.
Job Responsibility :
** Checking the product during In-process manufacturing as per drawing & Receiving goods.
** Prepare first piece and last piece approval report.
** Preparation of pre-dispatch inspection report.
** To prepare CAPA if any quality problem exist at customer end.
** To attend the customer complaint.
** Defining the areas to be improved, collection of data required for analysis Purpose.
** Planning of gauges and instruments for newly develop component.
** Daily rejection analysis and root cause.
** Handling of Different Types of Measuring Instruments Such As Vernier, Micrometer, Diff. gauges (Plug gauge, Snap gauge, Thread gauge, Feeler gauge etc.), Height gauge.
** To maintain record of Calibration of all JIG/FIX, Instruments and gauges.
** Maintaining Preventive and corrective actions records.
** Aware about seven Q.C. tools. & 5’S’.
** Guiding to line inspectors, about first piece inspection of components.
** Maintaining PPAP Documentation Which includes Control Plan, Process Flow Diagram, Gauges list, Insp. Layout Report by studying CMM report.

Significant Strength :
** Must be a team player and capable of working with all situation.
** Flexible & versatile to adapt any new environment to work on any project.
** Quick Learning ability to grasp changing software Technologies.

Other Accolades :
** Participated in various corporate social responsibility activities.
** General Secretary In College Hostel and perform Various Cultural activity. Internship

Activities and Interests :
Automobile Cars in general, sports cars, racing
Hobbies Watching TV, Gardening.
Traveling France, England, Belgium, Italy, Japan

Languages : English Hindi Marathi

Declaration :
I hereby declare that the above mentioned information is correct as per my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.
Date :
Place : Chinchwad, Pune
Vikas S. Ingale