www.forbesmarshall.com Forbes Marshall Pune : Design Engineer

[muthukalee]

Forbes Marshall Pune : Design Engineer

Code : CIG
Designation : Head Engineer Design
Department : Engineering
Location : Pune
Education Qualification : B.E.(Mechanical) / M.E. (Mechanical)
Total Years Experience : 8 - 10 Years
Job Description :
1) Would be leading and developing a team
2) Selection of the material.
3) Preparation of the diagrams of the related accessories
4) Knowledge of Control valves
5) Knowledge of IBR norms & calculation,
6) To be familiar with International standards like ASME, ASTM, API etc
7) Experience in Design & Development of valves
8) Expertise in Design and Analysis software- Solid works, AutoCAD, ProE, Ansys, CFD, etc.
Soft Skill : Should be a good team Player and possess good communication skills

Email responses To : cjames@forbesmarshall.com

About us :
For over half a century, Forbes Marshall has been building steam engineering and control instrumentation solutions that work for process industry. Forbes Marshall's goal is to provide solutions in Energy, Efficiency and Process Automation, using the best technology the world has to offer. 50 years ago we started out with steam generation solutions. Today we are comprised of twelve business divisions; most of them partnering with the world technology leaders in respective fields, manufacturing products that cover the entire spectrum of energy generation, energy efficiency, control and instrumentation for the process and power industry.

Contact us :
Forbes Marshall
P B # 29, Mumbai-Pune Rd.,
Kasarwadi, Pune 411 034
DID : 91 (0) 20-27149012
Tel : 91 (0) 20-27145595 / 39858555
Fax : 91 (0) 20-27147413
Website : www.forbesmarshall.com

[Guest]

GIRISH GOVIND KALSAIT
Contact Details Present address
Mobile No : (M) +91-9421723804 A-804, Kakade City, Karve Nagar,
E-Mail : girish_kalsait AT rediffmail.com Near Cummins Engineering College, Pune -411052

Seeking a position to utilize my skills and abilities in the Mechanical Engineering field that offers
Professional growth while being resourceful, innovative, flexible and content.
PROFESSIONAL SUMMARY
- HAVE WELL EXPOSURE TO CATIA V5 & AUTOCAD, MS EXCEL, MS OFFICE, POWER POINT.
WORK EXPERIENCE
Working as GET-Design Engineer at TATA AUTOCOMP SYSTEMS LIMITED-TECHNICAL CENTER (ENGINEERING CENTRE), PUNE in TATA MOTORS LTD ELECTRICAL OCC DEPARTMENT from 12th July, 2010 to till date.
- Designing and Developement of ELECTRICAL AND ELECTRONICS DISTRIBUTION SYSTEMS OF COMMERCIAL AND PASSENGER VEHICLES.
- DESIGNING OF ELECTRICAL HARNESS, E3D ROUTING, PACKAGING.

- Proficient in BENCHMARKING.
Key customer :
Tata Motors Ltd.
EDUCATIONAL CREDENTIALS
- S.S.C passed out in 2002 from Nevjabai Hitkarini Highschool, Bramhapuri, Chandrapur, Maharashtra with 64.40% (Percentage).
- H.S.C passed out in 2004 from Nevjabai Hitkarini College, Bramhapuri, Chandrapur, Maharashtra.
- Diploma passed in Mechanical Engineering in 2007 from Shri K.R.Pandav Polytechnic, Nagpur, Maharashtra with 85.08% (Percentage)
- B-Tech IN MECHANICAL ENGINEERING in 2010 from College of Engineering, Pune, Maharashtra with 7.1(CGPA)
ELECTIVE SUBJECTS
- “ OPERATION RESEARCH ” in TY-BTECH
- “ AUTOMOBILE ENGINEERING “ in final year B-TECH
ACADEMIC PROJECTS
- MANUFACTURING AND FABRICATION HEAD OF TEAM NEMESIS (PROJECT UNDER BAJA SAE INDIA 2010)
Details : Design and Manufacturing of ATV (ALL TERRIAN VEHICLES) as per the specification given in rule book which is stated by SAE INDIA for competition BAJASAE INDIA 2010 which is held at Pithampur, Indore.
- DESIGN AND FABRICATION OF PORTABLE CRANE MACHINE (Final Year Project).
Eligible for FORBES MARSHAL BEST OUTSTANDING PROJECT AWARD
- DESIGN AND FABRICATION OF PLASTIC PACKAGING MACHINE project in final year diploma.
POSITION : TEAM LEADER
- DESIGN AND FABRICATION OF CARD DRYER MACHINE.
- DESIGN AND FABRICATION OF DRILL MACHINE AND GRINDING MACHINE WHICH IS WORKING ON ONLY 1 MOTOR BY CHANGING THE ARRANGEMENT OF DRILL MACHINE.
PERSONALITY STRENGTHS
- Sound knowledge about basics of mechanical engineering with knowledge of Manufacturing processes
& Design processes.
- Good technical, analytical, problem solving & organisational abilities.
- Possess a flexible, learning & detail-oriented attitude.
HOBBIES
- BIKE RIDING.
- WORKOUT AT GYMNASIUM.
- LISTENING TO MUSIC.
- COLLECTING THE NEW TECHNOLOGY AND TECHNICAL SPECIFICATION OF CARS AND BIKES.
EXTRA CURRICULAR ACTIVITIES
- Member of organizing team and Coordinator of HOCKEY TEAM in National Level Event ZEST 2009
- Member (cadet) of NCC (NATIONAL CADET CORP) and having A & B CERTIFICATE with A & B GRADE.
- Participated in ROBOTICS event in National level technical event.
- Participated in LATHE WARS event in National level technical event.
- Member of team NEMESIS of COEP BAJA SAE INDIA 2010.
- Member of SOCIETY OF AUTOMOTIVE ENGINEERS INDIA (SAEINDIA).
IT/ COMPUTER SKILLS
Operating Systems/Language : Windows 98/2K, Windows XP, MS Office
Working Software’s : PRO-E, AUTOCAD, CATIA V5, ANSYS, MSC-Adams
IPG-Car maker, CATIA V5 ELECTRICAL MODULE (ROUTING)
ACHIEVEMENTS
- Stood 7th Merit from MAHARASHTRA STATE in DIPLOMA(MECHANICAL ENGINEERING)
- Got 9.7 CGPA in 7th Semester of Engineering.
PERSONAL DETAILS
Father’s Name : Govind S. Kalsait
Gender : Male
Permanent Address : c/o- G.K.Engineering Work Shop, Near Talathi office,
Vidhyanagar, Taluka-Bramhapuri, Dist-Chandrapur,
State- Maharashtra.
Date of Birth : 16 June, 1987
Marital Status : Unmarried
Location Preference : Anywhere
ACKNOWLEDGEMENT
I certify that the above information given by me is true and to the best of my knowledge. In case any error or omission found at later date, I shall be liable for consequences arising out of it.
Present location : Pune, Maharashtra
Date : (GIRISH GOVIND KALSAIT)

[Guest]

PRADEEP SINGH NEGI
Email : negi_pradeep AT rediffmail.com
________________________________________
MECHANICAL ENGINEER
Seeking assignments in the field
________________________________________
PROFILE
- Competent and result-oriented Mechanical Engineer with experience in AUTO-CAD & CADWorx Plant Professional, CADWorx equipment professional, CADWorx P & Id, Excel & M.S Word.
- Innate strengths in planning and executing erection of skid package within agreed timelines. Has good knowledge about Piping & Instrument Diagram (P & ID).
- Exceptional planning, execution, monitoring and resource-balancing skills, as well as the ability to handle multiple tasks in high-pressure environments and under tight deadlines.
- Possess experience in Solar Power Plant Piping.
- Possess experience in Word, Excel, Plastic Mould, Design Practice and Tooling Material, piping.
- Focused and hard working with well-honed management skills and proven ability to motivate professionals to maximize levels of productivity. Motivated and goal driven with strong work ethics, continuously striving for improvement coupled with excellent communication skills.
Key Strength Areas
P&ID- Skid packaging of Dryer - Layout - General Arrangement drawing - I/O assignment - Control philosophy- Pipe routing and supports.
________________________________________
PROFESSIONAL EXPERIENCE
EQUIPACK ENGINEERS 17-Dec 07’ to 11-June 10’
System Designer

- Involved in drawing the P & ID with the help of CADWorx P & ID and accountable for processing out BOM from the software itself sucessfully.
- Accountable for placing the equipment according to the layout.
- Adept in preparing the 2D & 3D General arrangement (G.A) for the plant & General overview for the equipment.
- Responsible for preparing the Datasheet in Excel & word.
- Taking responsibility of all the Data Sheet which is sent to the customer & coming from Vendor.
- Involved in piping for overall plant in CADWorx Plant Professional according to the piping specification.
- Accountable for processing out Isometrics and Bill of Material.
- Gained knowledge of drafting the fabrication drawing of Tank & Vessel.
ARYA ENGINEERS & CONTRACTORS PVT.LTD., PUNE 2-AUG 10’-Till Date’
Piping Engineer
- I worked on 3D Piping software on ours different projects.
- Responsible for filing system of drawing and datasheets which were submitted or received.
- Gained knowledge of checking the Bill of Material & Piping isometrics.
- Responsible for the Plant piping, Plot Plan,Equipment layout and Pripary Supports.
________________________________________
EDUCATIONAL DEVELOPMENT
M.C.T.E - 2007
Central Institute Of Tool Design Hyderabad
Bachelor of Engineering (Mechanical Engineering) – 2006, 68.4%
Bhopal Institute of Technology and Science
Class 12th, 2002, 55%
H E Raman HR Sec School, B.H.E.L Govindpura, Bhopal M.P Board
Class 10th, 2000, 69%
H E Raman HR Sec School, B.H.E.L Govindpura, Bhopal M.P Board
Projects Handled :
Title : SANMAR Oxy Purge Gas Dryer
- Synopsis : Done the engineering as well as Piping of this skid based Project successfully according to the Technical Specification which is given by the customer.
Title : MBE By-Product Plant piping IISCO
Synopsis : This By-Product plant consists several units, with the help of Piping and Instrument Diagram. I have done Elementary sulphur plant (clauss plant), Ammonia sulphate plant, Naphthalene recovery system & Gravel filter units piping according to the piping specification successfully on CADWorx Plant Professional & General overview for the same units.
Title : C3 RICH REFRIGERANT STREAM DRYER
Synopsis : This is a skid based project. Managed the engineering for this project which consists P & ID, datasheets of valves. Did general arrangement & complete piping with supports 2D & 3d.Involved with the fabrication drawing of the vessel according to the calculation or as per design.
Title : 256 KW Solar Power Plant
Synopsis: I am responsible for the 3d modeling of different equipment, Plot Plan ,2d equipment Layout, Factory Inspector drawing,Isometrics and BOM.

[Guest]

CURRICULUM VITAE
DHAGE NITIN BHASKAR
E-mail- nitindhage22 AT gmail.com
CAREER OBJECTIVE :
To work in challenging atmosphere that provide me an opportunity for learning and where my professional skill combined with make effective contribution to the growth of company.
ENGINEERING QULIFICATION :
1. BACHLOR OF ENGINEERING (B. E. MECHANICAL).
COLLEGE OF ENGG. MALEGAON (BK), BARAMATI, DIST-PUNE.
ACADAMIC QUALIFICATION :
EXAM
NAME OF
INSTITUTE/UNIVERSITY YEAR OF
PASSING % MARKS
CLASS
SSC B.R. GHOLAP SEC.& HIGH.SEC.
MAHAVIDYALAY, SANGVI,
PUNE –27
2004
78.26
DISTINCTION
HSC SHRI SHIVAJI VIDYA MANDIR,
AUNDH, PUNE-7 2006 71.50 FIRST
B. E. PUNE
UNIVERSITY 2009-10 69.93 DISTINCTION
ENGINEERING AGREEGATE : 62.50% (FIRST CLASS)
SEMINARS :
1) “SOLAR PUMPING SYSTEM”.
PROJECT :
A Design and manufacturing of “STAIR CASE CLIMBING ROBOT”
1)We have designed & manufactured such model for physically handicapped person to cross steps by considering specific step size.
EXPERIENCE :
Working from 12 Aug. 2010 to Till Date
Working in SEW Sarface Coating Pvt. Ltd. Pune
Company is in the field of Industrial SURFACE COATING plant design, manufacturing & Material Handling.
Working in Design Department as “Design Engineer”
RESPOSIBLITY :
1)Carry out the work with engineering drawing in design
2) Explaining the design as per drawing to Production people.
3) Explaining the assembly to site people.
4) To prepare proposal against Mktg. Engineering / Development Request.
5) Once order is transferred to Design from Marketing for execution, general layout is made as per final negotiated offer for customer approval.
6) To release the manufacturing drawings in auto cad as per requirement.
7) Checking of work as per drawing.
8)Using all our engineering knowledge and skill to improve the quality and productivity of the organition.
SOFTWARE SKILL :- PRO-E,Autocad-2010
PROJECT HANDLED :-
Batch Type Oven –
- Electrical Heating Oven.
- H. S. D. (Diesel) Fired Oven.
- L.P.G. (Gas) Fired Oven.
Overhead Conveyorised Oven
- Camel back oven.
- Conventional oven.
- Varnish curing oven.
My role in design of the oven-
- Preparation of lay out according to customer’s choice.
- Right Sizing of oven according to layout conditions.
- Heat load calculation for oven.
- Air handling calculation.
- Design Distribution system for air handling unit.
- Preparation of engineering drawing.
Painting booth :
- Size of booth.
- Air handling unit calculation.
- Pump calculation.
- Water wall calculation.
Pressurization Chamber
- Size of chamber.
- Air handling unit capacity calculation.
- Filter unit selection.
- Preparation of drawings.
Pretreatment line
- Spray tunnel.
- Sizing of the spray tunnel.
- Spray calculation.
- Pump LPM calculation.
- Tank sizing according to LPM.
EXTRA-CURICULAM ACTIVITY :
1) First prize winner in State level Poster competition.
2) Participated in National level Robotics competition
3) Participated in State level Robotics competition

[Guest]

RESUME
JOSHI KISHORE VIJAY
E-mail :-kishorvjoshi AT rediffmail.com

PROFILE IN BRIFE :
As a part of three year diploma in Mechanical from Shri Sant Gadge Baba Polytechnic Z.T.S. Bhusawal & also complete Bachelor of Engg .(Mechanical) from J. T .M .C.O .E. Faizpur. Dist :- Jalgaon. ( Maharastra )
EDUCATION AND TECHNICAL TRAININGS :
- Diploma in Mechanical from S.S.G.B. Polytechnic, Bhusawal, Dist : Jalgaon.
(1995-96) with First Class. (Regular)
- Bachelor of Engineering from J. T. M. C. O. E., Faizpur Dist :Jalgaon.
(2000-01) with First Class.(Regular)
PROJECT DETAILS :-
- Diploma In Mechanical :-Safety Engg. (Study Project)
- Bachelor of Engg. :-Two Panel Flat Plate Solar Water Heating System (Fabrication project)
INDUSTRIAL EXPERIENCE :-
Total Experience : - TEN + YEARS.
- Jain Irrigation System Ltd. Jalgaon.
(PROJECT ENGINEER) from 01.05.2001 to 14.06.2004.
COMPANY PROFILE :-
JISL is an ISO9001 Company. It is division of Jain Group of Companies which is having an annual turnover of 1000 Cr. The Company is involved in Product Development & Manufacturing PVC Pipe, Drip Irrigation System, Corrugated Sheet, Timbron Wood, Mango Juice, Pippin, Solar Water Heating System, Solar Photo Voltaic System etc.
JOBS&WORK RESPONSIBILITY :-
Project Engg. For Installation & Commissioning of solar water heating system in Domestic &Major site on basis of space Layout.
MAJOR PROJECTS :-
- Shirdi Sai Pratisthan.
- Baramati Engg.&Law College(Vidya Nagari) site.
- Pond cherry Dairy Milk Plant.
- Military Academy, Mahu (Indore)
- Nestle Dairy Plant (Punjab)
- Baramati Lakedi Village Site.
- AURANGABAD AUTO ANCILLARY PVT.LTD.Waluj,Aurangabad.
(QUALITY CONTROL ENGG.) From 20.06.2004 to13.01.2005.
Aurangabad Auto Ancillary pvt. Ltd. Is an ISO9001 Company manufacturing difference type of jobs such as small sprocket gear, Bevel gear, Boss Caliber115, Chain Sprocket, Assembly of Gear Box (Three Wheeler Loading Auto.)
JOBS&WORK RESPONSIBILITY :-
Working as a Q.C. Engg. For C.N.C.SHOP& also work as a Q.A.Engg. For assembly section of Gear Box.
- DHANESH AUTO ELECTRICAL LTD.,W-28 Waluj, Aurangabad.
(QUALITY ASSURANCE ENGG.) From 15.01.2005 to15.07.2005
Dhanesh Auto Electrical Ltd.Manufacturing Two-Wheeler Chassis of (BAJAJ AUTO).
JOBS&WORK RESPONSIBILITY :-
Working as quality Assurance Engg. For inward& outward component related with chassis.
- CREATIVE TOOLS& PRESS COMPONENTS PVT.LTD.AURANGABAD.
(QUALITY ASSURANCE ENGG.) From 16.07.2005 to 24.02.2007
C.T.P.L.Pvt. Ltd. Manufacture silencer of Two Wheeler Bikes Likes, PLATINA ,WIND CT, CT100,KG.
JOBS&WORK RESPONSIBILITY :-
Working as a Q.A. Engg. in silencer division for inward &outward component inspection ,Vendor Development aims to ZERO Defects ,Vendor process Audit, Develop & modify comp. Or sub assembly of customer ends. identified problem related w.r.t previous customer complaint & in-house production of silencer, in process audit ,calculate productivity w.r.t various stages of production, Cost Reduction Analysis of defects related with finish goods. Have Knowledge of ISO&TS Documentation.
- DJR DELUXE BEARINGS LIMITED,
Gat No :-183, village-Sanaswadi, Tal.Shirur Dist:-pune-412 208( five years experience)
(Product Design Deptt. ) As a Dy. Manager From 18.03.2007 to Up till Dated.
Manufacturing of Varies Types of clutch Release Bearing’s ,king pin bearing, steering bearing , ball bearing,niddle bearing,as per customer Requirements
(TAFE,FORCE MOTORS, TATA MOTORS, SETCO,VALEO,EICHER MOTORS,ASHOK
LEYLAND etc.)
JOBS & WORK RESPONSIBILITY :-(Design & Development,Validation)
1. Design calculation of bearing and design verification,Modeling,Drafting ,Detailing with the help of Solidworks 2008 & AutoCad-2008
2. Standardization of Parts and customization of standard bearing
3. Drawing and detailing giving with geometric tolerances.
4. Development of clutch release bearing as per customer requirement.
5. VAVE Proposal submitted to customer for new generation bearing as compare to cost effectivness, quality,light weight hign load carrying capacity compare to existing product.
6. Development the product as per timing plan.
7. Plastic mould die design & manufacture as per detail drawing.
8. Developed new innvotive concept & work on it,validated product & submitted in pre lauching phase.
9. Prepared DFMEA,APQP all new developed product ranges.

JOB SKILLS & EXPERIENCE :-
Analytical Approach, Problem Solving skill& techniques
System Knowledge
Decision Making
Skill to learn technique& implement that in organization to built it strong
Skill of developing new activity in organization
Knowledge of designing ACB-CLUTCH RELEASE,
TAPER THRUST BEARING
STEERING BEARING
BALL BEARING
THRUST PAD, THRUST ROLLER
SP.ROLLER BEARING.
Also Working As Application Engg. In Testing Deptt.Work on Simulation of Clutch Release Bearing, Simulation of King Pin Bearing, Grease Leakage Test, Dust Proof Test.
ACHIEVEMENTS :-
Best Suggestion To Reduced Product Cost By Modification Of Form-Formats.
Increased Production By20% By Modifying Components.
Reduced Customer Complaints By Modifying Components
Reduced Rework & Rejection With In Specified Objectives
To Check The Feasibility Of New Product Development & Gives Add Inputs To Design & Modification Of Product.
TRAINING :-
Attended In House Training Program &Implement System Required For
TS-16949 Standard(Ex. Design Failure Mode Effect Analysis.,APQP, & Manage
Design &Control System As Per Requirement ,)
COMPUTER SKILL :-
- Solid Works 2008 SPO 3.0
- Certified Course of PRO E/WILDFIRE 2.0
- Certified Course of AUTO CAD 2006.
Model Projects During Institute Training :-
Double Bearing Assly.
Wheel Support Assly.
Drill Press Vice Assly.
Pipe Vice Assly.
Butterfly Valve Assly.
Safe Guard Cover of Pump Sets.

[Guest]

CURRICULUM VITAE
MD SHAHNAWAZ ALI
E-mail : md.shahnawaz.ali.me AT gmail.com

PROFESSIONAL OBJECTIVE
- To be an active part of a growth oriented concern, which gives me the opportunity to exploit my worth and ingenuity and opens the doors for me to move ahead and stabilize my future professional career.
EDUCATIONAL QUALIFICATION
B.E Mechanical Engineering
10th Sayyid Akbar Hussayni school Gulbarga
ICSE
NEW DELHI
2004-2005
67.6%
First
class
12th Farhan pu college Gulbarga
P U BOARD
2006-2007
59.3%
SECOND
CLASS
B.E Khaja Banda Nawaz College of Engineering
Visvesvaraya Technological University (VTU) Belgaum
2007-11
65.0% First class
ADDITIONAL CERTIFIED COURSES

POST GRADUATE DIPLOMA IN MECHANICAL DESIGN OF PROCESS EQUIPMENTS
From Suvidya Institute of Technology Mumbai
- DESIGN OF STATIC EQUIPMENTS
- Pressure vessels
- Reactors
- Heat exchangers
- Storage Tanks
- Supports (Leg,Lug,Saddle & Skirt)
- OVER VIEW OF ROTATING EQIUPMENT
- CODES
- ASME SEC VIII DIV 1
- TEMA
- API 650
- IS 1893 & IS 875
SOFTWARE AND HARDWARE SKILLS
Operating system : XP/2000/98,Windows 7,Vista
Other application : MS-Office
3D Application : Solid Edge
Programming : CNC-Train
FEA Application : Algor
AREAS OF INTEREST
- Petrochemical Plants
- DESIGN
- Industrial Plants
STRENGTHS
- Urge to learn more.
- Excellent communication and interpersonal skills.
- Can work with co-ordination and efficiently in the team as well as independently.
- Hardworking, Sincerity and Honesty.
- Conveying ability and Leadership Qualities.
IN-PLANT TRAINING
- ALSTOM PROJECTS INDIA Ltd, SHAHABAD.
- Casting :Casting of pulverizer balls, rings, car dies
- Machining : Machining process on lathe machine, shaper machine, grinding machine
- Fabrication : Fabrication of cement kiln shell
PROJECT
Solar Operated Boom Sprayer

[Guest]

CURRICULUM VITAE
PRADNYA MADHUKAR NIKAM
E-mail - : pradnyanikam99 AT gmail.com .
_________________________________________________________________________
OBJECTIVE

To expand and improve my technical knowledge & securing a challenging position to utilize my skills and abilities in the industry.
WORK EXPERIENCE
1. Organisation : Rubicon Design & technology Pvt.ltd
Duration : Worked six month (From 08 Nov 2010 upto till date)
Designation : Trainee Design Engineer.
TRAINING PROJECTS
Clutch Pedal Assembly (Casting)
Motor Blower Assembly
Assembly Of Engine Parts
2. Currently working in SHIVAMTECH ENGINEERING DESIGN PVT. LTD. As a Design Engineer (Pro-E & AutoCAD).
ACADEMIC PROJECT
Name of Company : Ni2 Designs (ni logic pvt.ltd.)
Project Title : MODELING AND SIMULATION OF TWO WHEEL BALANCING ROBOT
Project Duration : 6 Months (Dec 2009 – Jun 2010)
Learning’s : Modeling & Simulation in 20 Sim Software, Balancing Control System.

EDUCATIONAL QUALIFICATION

Qualification Year Of Passing Percentage(%) School/College University/Board
B.TECH 2010 CGPA – 6.85 C.O.E.P Autonomous College
HSC 2006 76.53 Modern College, Shivajinagar Maharashtra Board
SSC 2004 80.53 M.S.S. Highschool, Chinchwad Maharashtra Board
SOFTWARE KNOWLEDGE
Design Software : Pro-E, AutoCAD
Basic Knowledge of CATIA, ANSYS & 20 Sim Software
Languages : C
EXTRA AND CO-CURRICULAR ACTIVITIES
1. Volunteer for the event MIND SPARK
2. Volunteer for the REGATA 2006-07 & MESA
3. Member of MESSA Committee in 2008-09.
4. 512 Workshop and Mather & Platt – Educational visit.

PERSONAL STRENGTH
1. Quick learner
2. Hard working
3. Teamwork
HOBBIES
1.Drawing
2. Listening Music
3. Travelling
4. Hanging Out With Friends