Piping layout Designer Singapore : SGS

[mskavi]

SGS Singapore : Piping layout Designer
Company Name : SGS
Company Location : Singapore
Designation (of vacancy) : Piping layout Designer
Company E-mail ID : sheeli.kuang@sgs.com
Company Website : www.sgs.com/technicalstaffing

Job Description, Candidate Profile, Company Profile, Company Address :
Responsible for developing piping layout drawings from conceptual design up to detail engineering design. These includes piping routing sketches, piping isometric drawings, piping layouts and plans, general arrangement drawings, section and elevation drawings, equipment layout, and material take-off in accordance with P&ID/piping material specification/vendor drawings and client's requirements.
• Assist engineers to develop process flow diagram and piping & instrument diagram.
• Thorough investigation on other discipline drawings prior to new piping layouts to avoid clashing and inform them if found any inconsistencies.
• Disseminate drafting works to draftsmen and monitor closely to meet deadlines.
• Attend weekly coordination meeting between other discipline engineers and designers.
• Able to travel from time to time
Experience in 2D AutoCAD
Minimum 5 years experience in similar role
Ability to communicate in Chinese.

Please send your application to sheeli.kuang@sgs.com

Contact us :
Sheeli Kuang
SGS Testing & Control Services Singapore PTE LTD.
26 Ayer Rajah Crescent #03-07
Ayer Rajah Industrial Estate
139944
Singapore

t : +65 6379 0111 ext 283
f : +65 67 75 3457

[Guest]

Hi all
I am looking for any oppurtunity in piping stress analysis using CAESAR II at singapore / malaysia .

looking for both at entry level or exp openings
plz post any such jobs
thanx in adv
rgrds
Harish

[Guest-IJT]

Name : Janaki Ram
Email : jram.engineer AT gmail.com
Designation / Skillset : Piping Designer
Dear Sir,
I am Janaki ram, introducing as a Piping Designer having 7 years Relevant Experience in Oil and Gas Projects and Softwares known to work are PDMS, SP3D, CadWorx, Ceasar5.10, AutoPlant, AutoCad, Navisworks review and Jetstream and MS office Tools.
Presently I am seeking a job in SP3D or PDMS on contract or permanent basis and willing to relocate immediately.
Please see the details of Experience in attached CV.

Resume :
CAREER OBJECTIVE
To serve the Organization with my Technical and managerial abilities in Engineering to develop career as an Eminent Designer and to have a Challenging career in Piping Design with Multi Tasking Capabilities.
EDUCATIONAL QUALIFICATION
- A Post Graduate Diploma in Piping Engineering, 2011
Vishwakarma Institute of Technology, Pune, INDIA
- Diploma in Mechanical Engineering (Board of Technical Education, Karnataka), 2003
K.H. Kabbur Institute of Engineering, Dharwad, INDIA
Project : Spinning Machine
SUMMARY OF EXPERIENCE
Overseas Experience :
- SBM offshore systems as a Piping Designer in EPC.
(From Dec.2008 to Dec. 2010), Place : Abu Dhabi – UAE Country.
Subcontinent experience :
- Presently Worked as Piping Designer in Saankhya Tech Neering (I) Pvt. Ltd.,
Short Term, (Jan. 2011 to May. 2011) Place : Bangalore, INDIA
- PDMS Designer in Sidvin Core-Tech (I) Pvt. Ltd., (Sep. 2006 to Nov. 2008)
Place : Bangalore, INDIA
- CADD Engineer in QuEST India Limited, (Jan 2005 to Sep 2006)
Place : Bangalore, INDIA
- Technician Apprenticeship (Oct. 2003 to Oct.2004) Place : Hubli, INDIA
TECHNICAL SKILLS
Piping : P & I Diagram, Piping Codes and Standards (ASME, IS, ANSI, DIN, BS), Pipe
Fittings, Pipe Class Components, Statutory Regulations, Pipeline Sizing, Pumps
And Compressors, Isometrics, BOM and Preparation of Specs.
Materials : Piping Material and Selection Procedure, Valve Selection and specification.
Pipe Supports and Span calculation, Pipe Fittings selection Procedure.
Stress Analysis :
- Material specifications & commonly used CS & SS materials for piping components
- Fundamentals of SOM relevant to pipe stress analysis
- Preliminary load calculations based on pressure and pipe/fluid weights. Primary & secondary loads.
- Combined pipe stress analysis including weight analysis, thermal analysis, flexibility analysis & introduction to wind & seismic analysis. Expansion joints & expansion bellows including simple loop calculations.
Computer Proficiency :
- PDMS 11.6
- SMARTPLANT 3D Integraph
- CAESAR-II 5.10
- CADWorx Plant 2008
- Auto Plant 2008
- AutoCAD(All versions)
- Navis Works Jet stream and Review.
- MS office Tools.
Work Experience
- Company : Saankhya Techneering Pvt. Ltd.
Stream : Oil & Gas and activities are Engineering, Design and back office support
Designation : Piping Designer

Responsibilities
- Preparation of SPEC’s & Catalogs.
- Modeling done as per SPEC’s.
- Checking Piping Isometrics with P&IDs, Piping Specs, Line list, Piping & Equipment GA Drawings.
- Dealt with line routing & layout of piping and played a pivotal role in execution designing and developing equipment layout through application of Master P&ID.
- Preparing plot plan, Equipment location plan & elevations and piping GA drawings
- Maintained coordination with other areas for interconnection and area demarcation and incorporating the comments of other departments in the works done
- Involved in preparation of isometrics as well as Releasing of Final Isometrics.
- Conducted joint review with process and other departments and incorporating the comments.
Project :
- Shallow Water Complex (Offshore), Qatar Petroleum.
- Company : SBM Offshore systems pvt. Ltd.
Stream : Oil & Gas and activities are Engineering, supply and installations
Designation : Piping Designer

Responsibilities
- Performing initial field survey to determine optimum equipment and piping layout, tie-ins to existing facilities and facility operations, maintenance, constructability aspects and safety criteria.
- Routing of additional lines during follow-on Engineering.
- Clash checking 3D model.
- Preparation of Piping Isometric drawings, Pipe Supports based on final layout drawings for fabrication and erection.
- Creating CAD Drawings from Engineering sketches and scrubbing drawings from design mark up.
- Material takes off procurement of pipes, fittings and valves etc raise purchase requisition for pipes, fittings and valves.
- Provide Piping Design of complex facilities.
- Maintained contact with Client and other discipline engineering leads (Mechanical Equipment, Electrical & Instrumentation) to assure accurate, timely communications and flow of information is taking place.
- Monitors, controls, schedules and reports pipe shop fabrication and delivery (when applicable)
- Reports discipline progress to project and discipline management on predetermined intervals.
- Initiates and monitors quality control checking.
- Responsible for issuing Piping Design Documents and Drawings.
- Coordinating field construction inquires for re-solutions.
- Clarifying technical queries.
Projects :
- TDS 2000 RIG 1 – Lone Star
- TDS 2000 RIG 2 – ODEBRECHT Drilling Services LLC
- TDS 2500 RIG 3 – DELBA III
- Company : Sidvin Core Tech. Pvt. Ltd.
Stream: Oil & Gas, Petrochemical, Process industry and activities are engineering,
Design
Designation: PDMS Designer

Responsibilities
- Routing of Pipelines in PDMS as per P&ID and Supporting of Pipelines.
- Extract pipe supports Module Draft
- Checking Piping Isometric’s According to P&ID & Modify.
- Preparation of Equipment Modeling in PDMS.
- Routing of Pipelines in PDMS as per P&ID and Supporting of Pipelines.
- Plant Development Piping as per International Codes.
- Preparation of General Arrangement Drawings.
- Preparation of Equipment Layout in PDMS Draft Module.
- Preparation of Piping Plot Plans.
- Nozzle Orientation of Equipments.
- Clash Checking.
- Knowledge on MDS Tool.
Projects:
- GUSTOMSC-INC HOUSTON, TEXAS – DELBA DRILLING TDS – 2500 (SBM Offshore): It is a semi submersible dynamically balanced drilling rig belongs to DELBA III (Delba Drilling international co-operation U.A).
- FPSO ESPIRITO SANTO TAMBA BY-BC 10 FIELD (Brazilian deepwater floating terminals Offshore SBM Inc.) It is a FPSO ship, belongs to CHEVRON, which is now converting for extracts the petroleum products from sea crust.
- CRISTAL PIGMENT PLANT (The National Titanium Dioxide Company Saudi Arabia).
- Company: QuEST Pvt. Ltd (Quality Engineers & Software Technology)
Stream: Oil & Gas, Aircrafts design and Activities are Engineering, Design and Draft.
Designation: CAD Engineer

Projects:
- XIKOMBA & BE&K, Birmingham-Alabama: Drafting of P&ID in customized AutoCAD Platform using Standards of BE&K Tools, Cross-checking of P&ID’s, Effective co-ordination with subordinates and seniors to reduce mistakes caused due to miscommunication and reduce overall job completion time.
- Company: Basic Training Centre (BTC), SWR.
Stream: Railway
Location: Hubli, INDIA Country
Designation: Technician

Role: During this Period, I was trained in the Shop floor of different Sections like Machine Shop, Smithy Shop, Wagon Shop, Carriage Section, Millwright section and attended some of the Training Sessions like ISO (International Organization for Standardization) and Project done on Japanese 5’s Concept Rule.
- Company: Advanced Vocational Training, Industrial Training Institute.
Course: Mechanical Maintenance(Repair & Overhauling of conventional Machines)
Location: Hubli, INDIA Country
Period: August 2003 (2 weeks)

Declaration: I hereby declare that the above-furnished details are correct to the best of my knowledge and belief.
Janaki Ramudu Muthyala
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4363544
Date & Time : 12th Jul 2011 5:45 PM (UTC)
IP Address : 115.184.175.146
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)
Predicted Country : India

[basubavkar]

Basavraj Kashinath Bavkar
e-mail : basubavkar AT gmail.com

Career objective : A position in Piping Engineering providing an opportunity to make strong contribution to organization goals through continued development of professional skills.
PROFESSIONAL SUMMARY
- Bachelors in Chemical Engineering from Pune University.
- Over 6 years of experience in Piping Engineering (Layout).
- In the Field of Basic & Detail Engineering of Process Plant.
- Generation of Overall Plot Plan, Equipment layout & Piping Plan.
- Calculation of Bill of Material for piping & support components.
- Co-ordination with other departments for Inter departmental checking activities.
- Isometrics Checking for Quality management and Audit purpose.
- Knowledge of 3D modeling piping software viz : Bentley Auto plant V8.6.1.
- Knowledge of 3D Model Review Software viz : Nevis Works Publisher, Roamer & Freedom
PROFESSIONAL EXPERIENCE
- UHDE India Pvt. Ltd.,(Company of ThyssenKrupp Industries) Vikhroli, Mumbai.
UHDE India Ltd. Is a premier Indian Engineering Company for EPCM/EPC-LSTK implementation of Chemical and Industrial Plants, operating from Mumbai and Pune with a workforce of approximately 1,000 specialists. Its solutions encompass the entire range of services for fertilizer, petrochemicals, refinery, and electrolysis, metallurgical, pharmaceutical, and industrial project. It is subsidiary of UHDE GmbH and considered in a group company of ThyssenKrupp Technologies AG.
Period : December ‘07 to till date.
Position : Engineer-Piping.
Project-I : Utkal Alumina Plant.
Client : Utkal Alumina International Limited (Aditya Birla Group)
Responsibilities :
- I have worked as a Area engineer “Pre-disilication Area” under following activities done as a Area person :
1. Arrange the equipment with proper location as per process requirement & space availability.
2. Checking & Releasing equipment plot plan & piping plan after updating comment as per layout standard.
3. Checking the all vendor documents as the layout point of view and give them comment.
4. Proper study of stress critical lines routing to minimize equipment nozzle load.
5. Proper support markup for line to minimized rework in routing.
6. Design and check special support requirement as per layout basis.
7. Design the grade slab & trench layout as per process requirement and the space availability with proper planning.
8. Checking the isometrics with respect to P&ID. And than update if any comment than Issued for Construction.
9. Taking a BOM as per P&ID requirement in the initial stages after that BOM to generated using the software by BOM generation method.
10. Checking the 3D-Model with help of Navies work software to minimize clashes and study proper routing.
11. Good interdepartmental co-ordination with other dept relating area activities.
12. Proper checking of civil drawing as per layout point of view & give our comment to them to incorporate that.
13. Do well piping study on tanks as per general requirement plant layout & providing Wright & correct information related to nozzle, instrument, piping and controls for plat-forming and operation / maintenance access.
14. Leading the team of four piping designer modular with proper planning to complete the work as per schedule.
- Presently I am working as Lead engineer from last one year in this project in that following activities to done :
1. Major activities to be done, releasing the Overall Plot Plan. :
- Proper Co-ordination and follow up with other consultant related to plot plan development, road & drains development.
- To study the input from other consultant and feed properly in Overall plot plan.
2. IBR Documentation :
- As per IBR Procedure we are released IBR documentation.
- That includes Preparation of :
a) Process Flow Diagram for MP & LP steam
b) General notes & details for IBR
c) Steam network isometrics for IBR Approval
d) Consolidated Bill Of material preparation
e) Pipe wall thickness calculation
f) Piping spec , Branch table & Wall Thk. Table
g) Write-up on Steam Consumption
h) Flexibility analysis report
3. Resolving the Site quires as urgently basis with proper response and co-ordination with other department.
4. Follow up with spec group with there deliverables.
5. Checking the BOM delta for earlier revision with the latest revision.
6. Follow up with inspection as well as procurement team related to any site quires, procurement status & release order status of component.

Project-II : Weak Nitric Acid Plant Capacity 450TPD.
Client : Deepak Fertilizers & Petrochemical Ltd.
Responsibilities :
- Worked as a Lead Engineering in Nitric Acid Plant (Relocation).
- Combination of existing and new piping.
- Entire project deliverables in 2D AutoCAD.
- Preparing the Equipment Layout, Piping Plan & Isometric.
- Making the IBR Documentation as per the IBR standards.
- P-MECH CONSULTANT Ltd., Vashi, NaviMumbai
Period : February ’07 to November ‘07.
Position : Engineer-Piping.
Responsibilities :
- Routing the line in the 3D Software Bentley Auto plant V 8.6.2.1.
- Checking the isometrics with respect to P&ID.
- Generating BOM from Auto plant software and issued to client after the checking.
- Prachi Poly Products Pvt. Ltd.
Period : July ‘05 to December ‘06.
Position : Shift Supervisor.
Responsibilities :
- Working in di-Isobutene production Plant as shift Engineer. Looking for the production as well as site activities related to design.
COMPUTER PROFICIENCY
Applications : Basic Knowledge of PDMS software, Bentley Auto plant V 8.6.2.1, Navies Work Roamer, AutoCAD 2000 to 2010 and MS Office.
Operation system : Windows and DOS.
STRENGTHS & ACHIEVEMENTS
- Represented collage on zonal level in chess.
- Honest, hardworking and positive attitude.
- Comfortable working effectively both independently and in a team environment.
- Capable of picking up new tools and technology with a minimum learning curve.
ACADEMIC QUALIFICATION
- Bachelor of Engineering in Chemical Engg. First Class S.V.M.E.C, Chincholi, Nashik, Pune University. June 2005
- Diploma in Petrochemical Engineering Distinction
Institute of Petrochemical Engg., Dr. BATU, Lonere, May 2002
Raigad
- S.S.C First Class
Janta Vidaylaya Khopoli, Mumbai University Raigad. May 1998
- Piping Engineering Course
Suvidya Institute of Technology, Santacruze Mumbai. Nov 2006

[gopinathengg]

C.GOPINATH

Email : gopinathengg AT gmail.com
_____________________________________________________________________________
Objective
I am looking forward to associate myself with an organization, where there is an opportunity to share, contribute and upgrade my knowledge for the development of myself and organization served.
SUMMARY OF SKILLS
- Over 2 Years Experience as a Production Supervisor.
- CNC Machine operation (Lathe & Milling)
- NDT Inspection (ASNT – Level II – LPT, MT, RT, UT).
- AutoCAD Designing- providing Construction & shop drawings, 3D Modeling & Pro-E
- Knowledge in Microsoft Office Works
- Basics of Computer hardware and Assembling.
ACADEMIC QUALIFICATIONS & CERTIFICATIONS / SKILLS
- Diploma in Mechanical Engineering with 71.7% from M.I.E.T Polytechnic College- INDIA (2007-2009).
- H.S.C (2002-2004) passed from Govt. ADW Boys higher Secondary School, Trichy-India.
- S.S.L.C (2002) Passed from Govt. Higher Secondary School, Trichy – India.
- MICROSOFT Office from C Cube Computer Education March 2008 – June 2008.
- Auto cad 2D, 3D & Lisp from C Cube Computer Education July 2008 – October 2008
- CNC Machine Programming & Operations from Govt. Polytechnic College, Coimbatore- India.
- NDT Inspection (ASNT – Level II – LPT, MT, RT, UT) from NDT INSPECTION trichy Research Institute.
Piping technology with stress analysis
PIPING TECHNOLOGY :
- Classification of piping
- Pipe Line Drawing
- Pipe Manufacturing
- Codes Standard & Materials
- Pipe Fittings
Knowledge in :
- Process Flow Diagram reading (PFD)
- Piping & Instrumentation Diagram reading (P&ID)
- Piping Layout
- Codes & Standards (ASME, ANSI, BS, IS, IBR, TEMA, ASTM)
- Diameter calculation (Incompressible & Compressible fluids)
- Thickness calculations (ASME B31.1/B31.3, IBR)
- Minimum/Nominal thickness required calculations
- Working pressure calculations-Material selections
- Pressure drop calculation
- Primary & Secondary stress analysis in Piping
- Selection of diameter for Process Piping
- Load & loads combinations
- Allowable stress
- Flexibility Analysis
- Piping supports, restraints, guides, limit stops
- Valves (sizing & selection guide lines)
- Pipe Flanges
- Welding materials
- Types of Welding
- Welding Process
KNOWLEDGE IN SOFTWARE’S :
- CAEPIPE
Descriptions :
Piping layout preparation, Conversion of 2D to Isometric view, Piping & Instrumentation Diagram reading (P&ID), Process Flow Diagram reading (PFD), IBR calculations for Pipes/Tubes/End Plates & Compensation pad, Piping supports, restraints, guides & limit stops, Valves (sizing & selection guide lines), Selection of flanges as per ANSI B16.5, Calculations to find the Diameter, Thickness & Pressure drop calculations for the pipes. Prepare Bill of Materials & Material of Quantities.
Stress analysis using CAEPIPE. With using ASME, IBR, and ANSI Codes references.

PROFFESSIONAL EXPERIENCE
- S.S SELVA BALAJI ENGINEERING WORKS MAY 2011 - Till date.
- SHREE MAHALAKSHMI METAL INDUSTRIES MAY 2009 – MAY 2011.
PROJECT ACCOMPLISHED
1) S.S SELVA BALAJI ENGINEERING WORKS 20th Feb 2009 – Till date
Responsibilities :
- Working as a Production Supervisor.
- Material preparation as per drawing
- Inspection after stage by stage
- Hand over to management
- Dispatch
2) SHREE MAHALAKSHMI METAL INDUSTRIES 4th MAY 2009- 16th May 2011
Responsibilities :
- Worked as a Production supervisor
- CNC Turning operation and maintenance
- Work alert for workers
- Inspection after stage by stage
- Hand over to management
- Dispatch
MAIN PROJECT :
Project #1 Motorized Riveting Machine
company Sri Sakthi Engineering Works, Trichy
Duration 2 months
Description Riveting is the process of joining two plate or sheet of different material. It is also meant to joint the sheet with the pipe.
Our project motto is to do efficiently the body building in an automobile field. It focuses the attention of doing above operation in large quantity and with minimum time without wasting the human efforts.
In-Plant Training Experience
Company name Shree Mahalakshmi Metal Industries, Coimbatore
Duration 11.04.2008 to 31.05.2008
Production Jet & Submersible pumps, S.S Tube for Submersible Motors & Pumps