www.marinedesigners.com Autocad Draftsman Kochi : Smart Engineering Design Solutions

[muthukalee]

Autocad Draftsman Kochi : Smart Engineering Design Solutions

Job Description : Autocad Draftsman,Structural Design,Machinery design manager

1.Senior Machinery design manager :
B.E/ B.Tech Mechanical Engineering graduates with 8-10 years experience in machinery design department of a shipyard, design consultancy or classification society.
Functional Area : Should be up-to-date with the latest rules and developments in the industry, Familiar with Ship classification society rules and regulations (LLOYDS, ABS, IRS, DNV, IMO, IMS, NES) and practical ship building standards & procedures.
Conversant with ships machinery systems design and arrangements including piping system design and HVAC/ refrigeration systems.
Should be able to lead/ guide junior engineers and support them with required technical know how to do the design. Familiar with estimation of project resource requirement, planning and execution. Should be able to prepare formal document / reports. Maintain ISO records as well as update of practices.
Working experience in Basic , Detail and Production design is essential.

Skills Required : Autocad, M.S OfficeTRIBON/ CADMATIC (desirable)

2. Electrical Design Engineer :
B.E/ B.Tech Electrical Engineering graduates with 8-10 years of experience in ship's electrical system design.
Functional Area : Should be up to date with the latest rules and developments in the industry. Familiar with Ship classification society rules and regulations (LLOYDS, ABS, IRS, DNV Etc.)
Familiar with electrical load analysis for ships, preparation of Classification drawings, production drawings as well as system wise drawings.
Should be able to coordinate work with Out-fit, Piping, Machinery, Structural and other departments.
Scrutiny of suppliers/ makers drawings. Distribution of power and arrangement of electrical equipment on ships, Preparation of electrical specifications for equipment.
Should be able to prepare formal document/ reports, Maintain ISO records as well as updating of practices.

Skills Required : Application Knowledge of softwares like Autocad, M.S Office, Tribon, and Cadmatic.

3. Structural Design Lead :
B.E/ B.Tech STRUCTURAL ENGINEERING / NAVAL ARCHITECTURE/ Engineering graduates with 5 - 8 years of experience in ship's structural design.
Functional Area : Should be up to date with the latest rules and developments in the industry. Familiar with Ship classification society rules and regulations (LLOYDS, ABS, IRS, DNV Etc.).Should have done full cycle of structural design for ships. Should have hands on experience in design verification. Should be able to lead/ guide junior engineers and support them with required technical know. Should be able to estimate project resource requirement, plan and execute successfully.
Should be able to prepare formal document/ reports, maintain ISO records as well as updating of practices.

Skills Required : Application Knowledge of softwares like Autocad, M.S Office, Rule finder, Tribon, and Nupas .

4. FEM Analyst ( Consultant ) :

B.E/ B.Tech STRUCTURAL/ CIVIL/ MECHANICAL/ NAVAL ARCHITECTURE/ Engineering graduates with 10- 15 years of experience in ship's structural design and FEA.
Functional Area : Should be up to date with the latest rules and developments in the industry. Familiar with Ship classification society rules and regulations (LLOYDS, ABS, IRS, DNV Etc.) Should have done full cycle of structural design for a ship. Should have hands on experience in doing the design verification. Should be able to formulate methodology, model, mesh, apply boundary conditions, analyse the structure using various FEM softwares. Should be able to guide/ lead junior Engineers in executing the assignments. Should be able to estimate project resource requirement, plan and execute successfully.
Should be able to build up business model for general FEM analysis and make the department a profit centre.

Skills Required : Application Knowledge of softwares like Autocad, M.S Office, FEMAP, Nastran, Patran, Ansys, Strucad, Staadpro etc.

5. Draftsman :

Functional Area : Tasks will involve updating and creating 2D drawings of Structure, Machinery, Piping, Outfitting and Electrical drawing including schematic part drawings, assembly drawings, plant layouts, machine foundation drawings, Bill-of-material generation for completed drawings etc.

Skills Required : Very good proficiency in AutoCAD, good marine drafting skill and fast understanding of ship design drawings.

The remuneration will be based on skills and experience and be on par with the best in industry.
General Requirement. Good communication skills and ability to interact with people at all levels, as well as external parties

send their resume addressed to careers@marinedesigners.com.

Contact us :
Smart Engineering and Design Solutions Ltd.
III Floor, Building SDF 17
Cochin Special Economic Zone,
Kakkanad,
Kochi - 682 037, India.
Tel : +91 -484 - 4011869,
+91-484-2413329 , +91- 484 - 4058422
Fax : +91-484-2413328
e-mail : seds@marinedesigners.com

[Guest-IJT]

Curriculum Vitae

Prakash Mahadev Kharate
B.E (Mechanical Engg.)
Batch – June 2009


Email address :

prakash.kharate AT gmail.com

Permanent Address:
C/O Kharate Mahadev.
At- Bhogaji, Post- Shelu,
Kallamb. Dist- Osmanabad.
India – 413507

Personal Information:

Date of Birth : 04th Nov 1987.

Sex : Male

Nationality : Indian

Marital Status : Single

Father’s Name: Mahadev Kharate

Languages : English, Hindi,
Known Marathi.

Phone number:+91-9764217531 Objective
To make use of all sources to maximum extent and achieve the greatest height in Mechanical Engineering.
Areas of Interest
- Production
- Design
- Industrial engineering
Major Strengths
- Quick learner
- Dare to take up challenges
- Ability to work well with people at crucial situations
- Motivated and dedicated team player
- Imagination and Execution
Computer Proficiency
Design packages PLM, UG-NX-4, PRO-E, AutoCAD

Software Skills
Competency
Level of skill
Siemens PLM
Teamcenter User & Administration Good Knowledge in User & Administration
UG-NX-4 &
Pro-E Wildfire 2.0
Sketcher, Solid modeling, Surface modeling, Assembly, Drafting. Good Knowledge in Part Modeling, Assembly & drafting

Academic Chronicle
Course Institution Board/
University Year of
Completion Marks %
B.E. (MECH) M.S. BIDVE Engineering, Collage Latur.
SRTMUN
University,
Maharashtra
2009
60.74
(First class)
Avg.
DME Puranamal lahoti Govt.poly.
Latur MSBTE Board, Maharashtra

2006
61.69
(First class)
SSC Vidhybhavan high school, kallamb. Latur Board,
Maharashtra
2003 76.80
(Distinction)

Project Details
Final Year Project:
Project Title: TEST RIG FOR MEASURING THE PERFORMANCE OF THE BREAK
LINING MATERIALS.
(Objective of project was to prepare simplified set up of test rig SAE 661and reduce considerable cost of test rig SAE 661. And measure the performance of various brake lining materials by measuring its coefficient of friction and wear according to SAE661 test rig. Finally compare the performance of different materials and best suitable material is selected.)
Team size : 4
Duration : Five Months.
Type : Design and fabrication project.
Place : M. S. Bidve Engg. Collage, Latur.
Electives
- Non conventional machining process
- Advance manufacturing Technology

Extra & Co-Curricular Activities

- Team member of 1st Prize winner cricket team in an Inter Engineering Zone Level Competition-2005.
- Team member of 1st Prize winner kho-kho team Organized by PLGPL in 2004.
- Organizer of Annual Social Gathering 2008-09 of M.S.Bidve Engg collage, Latur.
- Captain of collage cricket team for year 2007-08 and 20008-09.

Technical Society Memberships
- Member of ISTE Student Chapter- 08.

Hobbies
- Playing and watching Cricket & Football.
- Listening to music.
Declaration
I (Prakash Kharate) hereby declare that the above written particulars are true to the best of my knowledge and belief.
Yours truly,
Date: / /2010
Place: Pune (Prakash Kharate)

[Guest]

VISHNU RAJ N
MECHANICAL ENGINEERING
vishnuraj4 AT gmail.com

OBJECTIVE :
Looking forward for a challenging position in an industry that offers professional growth, this is on the leading edge.
ACADEMIC PROFILE :
CLASS/COURSE YEAR BOARD/UNIVERSITY PERCENTAGE
B.E
( Mechanical
Engineering ) 2007-2011 Jayam college of engineering and technology, Dharmapuri. 82%
(Upto 7th sem)
PLUS TWO
2005-2007
SVGVHSS KIDANGANNUR
72%
SSLC
2002-2005
SHVHS KARAKKAD 79%
DEVELOPED SKILLS :
PROJECT DETAILS :
Undertaken at : JAYAM COLLEGE OF ENGINEERING & TECHNOLOGY
Title : MODIFIED DESIGN OF EXTRUDED DIE FOR IMPROVING OF
PRODUCTION FOR PLASTIC EXTRUDING MACHINE
Description :
The main objective of the project is to find a screen changer in plastic extruding machine. The problem currently faced by the plastic extruding machine is the deposition of the debris on the filter section. The “True wye” shaped design holding the specially included pressure sensor & the butterfly valve was introduced here in this concept, as two section of passage was introduced so to control one while the other is working. Thus, the new concept is definitely a new benchmark, as in this design there will be continuous process, comparing with the existing concept or design.

FIELD OF INTERSEST :
- Automobile
- Non-destructive test
CO-CURRICULAR ACTIVITIES
- INPLANT TRAINING

- Underwent“Inplant training in cochin port trust, Ernakulum During the year 2010.
- Underwent “Inplant training in BMW, Chennai during the year 2010.
- TECHNICAL
- Completed foundation course on “Non-destructive testing” at Matrix center, Dharmapur in 2010.
- Completed foundation course on “AutoCAD” at CADDCENTRE, Thiruvalla in 2011.
- Completed fifty hours soft skill training conducted by Anna University of technology at Jayam College of Engineering & Technology, Dharmapuri in 2010.
EXTRA- CURRICULAR ACTIVITIES :
- Member in ASME, ISTE, ISME, IAENGG.
STRENGTH :
- Student Secretary of Mechanical Engineering Association,Dept.Of Mechanical Engineering, Jayam College of Engineering & Technology and organized events such as DAZZTECH2K9, FAREWELL DAY2010 and other technical events.
- Student coordinator of ISTE (Indian Society for Technical Education) and organized X ISTE State Level students Convention – 2010.

[Guest]

CURRICULAM VITAE
ANIL KUMAR. N
Email : ani.kumar77 AT gmail.com

OBJECTIVES
Looking for a work that provides Challenging, opportunities for implementing new ideas and skills to enhance the knowledge gained and also to be perfect and effective in every action that proves my abilities and capabilities.
EDUCATIONAL QUALIFICATION
Examination Passed Name of School / College University Year of passing
B.E in Mechanical Engineering Vidya Vikas Institute of Technology, Mysore Vishveshvaraiah Technological University 2011
Diploma in Mechanical Engineering Vidya Vikas Institute of Technology, Mysore DTE Board 2005
SSLC Shanthala Vidya Peetha, Mysore KSEEB 2002
COMPUTER SKILLS
- Autocad
- Pro e
- CATIA
- Tribon
WORK EXPERIENCE
- Plumbing designer in AutoCad for 16 months.
- Working as traine design engineer at Conceptia design & software technolgy, Bangalore.
ACADEMIC PROJECT :
- “DESING OF HOUSING HALVES IN SEAM WELDING FIXTURE”
Description :-
The project was carried out in AUTOMOTIVE AXLES LIMITED (AAL), Mysore.
In this project we have designed a fixture which would hold the housing halves for a proper seam welding. In usual practice the housing halves were not weld properly, due to improper holding procedure. To overcome this problem we had designed a new holding fixture. By this fixture we can minimize time error and also process can be standardized

[Guest]

CURRICULAM VITAE
ANIL KUMAR. N
Email : ani.kumar77 AT gmail.com

OBJECTIVES
Looking for a work that provides Challenging, opportunities for implementing new ideas and skills to enhance the knowledge gained and also to be perfect and effective in every action that proves my abilities and capabilities.
EDUCATIONAL QUALIFICATION
Examination Passed Name of School / College University Year of passing
B.E in Mechanical Engineering Vidya Vikas Institute of Technology, Mysore Vishveshvaraiah Technological University 2011
Diploma in Mechanical Engineering Vidya Vikas Institute of Technology, Mysore DTE Board 2005
SSLC Shanthala Vidya Peetha, Mysore KSEEB 2002
COMPUTER SKILLS
- Autocad
- Pro e
- CATIA
- Tribon
WORK EXPERIENCE
- Plumbing designer in AutoCad for 16 months.
- Working as traine design engineer at Conceptia design & software technolgy, Bangalore.
ACADEMIC PROJECT :
- “DESING OF HOUSING HALVES IN SEAM WELDING FIXTURE”
Description :-
The project was carried out in AUTOMOTIVE AXLES LIMITED (AAL), Mysore.
In this project we have designed a fixture which would hold the housing halves for a proper seam welding. In usual practice the housing halves were not weld properly, due to improper holding procedure. To overcome this problem we had designed a new holding fixture. By this fixture we can minimize time error and also process can be standardized