Sieco Engineers Pvt Ltd Bangalore : Welding Engineer

[muthukalee]

We know that people are our greatest asset. It is our staff’s professionalism, innovation, teamwork and dedication to excellence that have led us to be in the business for over 25years. It is these qualities that are vital to our continuous success.

We offer our employees exciting and challenging projects across a diverse range of industries. We are always looking for talented professionals with good experience to become part of our company’s rapid growth.

Indicated below is the list of current open positions with Sieco, candidates with Good Academic Record and good knowledge in relevent field may send their resume indicating the position to sieco777@airtelmail.in
1. Design Engineer - BE / B.Tech - Mechanical - 1 to 3 yrs experience

[LIST][*]Good hand on AUTOCAD[*]Knowledge of Indian / Internatinoal codes for Pressure Vessels / Heat Exchangers, Materails of construction.[/LIST]
2. Process / Proposal Engineer - BE / B.Tech - Chemical - 1 to 3 yrs experience

[LIST][*]Good knowledge of Process Plant Equipment Design. Conversant with Piping Design will be added qualification.[/LIST]
3. Welding Engineer - M.Tech - Mechanical - 0 to 1 yrs experience

4. Production Engineer - BE / B Tech / ME / M.Tech - Mechanical - 0 to 1 yrs experience

5. Process Engineer - BE / B Tech / ME / M.Tech - Chemical - 0 to 1 yrs experience

6. Office Secretary - Graduate in any discipline 2 to 4 yrs experience
[LIST][*]With good communication skill (Verbal / Writing)[*]Conversant with Business Letters[/LIST]

Contact us :
Sieco Engineers Pvt. Ltd.,
#64, 'Savinaya' 1st Floor, 7th Main,
BTM Layout, 2nd Stage,
Bangalore - 560 076.
Telephone No :+91 80 41658078 (Works), +91 80 41200659 (O)
Mobile :+91 92431 10681 (M.D), +91 9886793854 (CEO)
+91 9886782854 (ED - Works)
Fax No :+91 80 41658997
Website : www.siecoengineers.com

[Guest-IJT]

Mohammed Aftab Alam
Email : -
alishona AT gmail.com
aftab_alammm001 AT yahoo.co.in

Present Address : -
Mohammed Aftab Alam
Qr. No-3029,
Sector-4A
Bokaro Steel City
Mob : +966-599686065.
Mob : +966-595791232.
Passport No. : G4171726
Permanent Address : -
Mohammed Aftab Alam
Qr. No-3029,
Sector-4A
Bokaro Steel City
Mob : +966-599686065.
Mob : +966-595791232.
Passport No. : G4171726
Personal Data : -
Date of Birth : 12-02-1983
Sex : Male
Nationality : Indian
Marital status : Married
Languages : English, Urdu,
Arabic, Hindi.
Objective
- To have a successful career and make a positive contribution through my knowledge, skills and personal commitment to the organization and to continuously strive for professional excellence and individual satisfaction.
Education
-
- B.E Mechanical, Adichunchanagiri Institute of Technology, Chikmagalur Visveswaraiah Technological University– 72.2 %
- INTERMEDIATE (MPC) from B.S.L +2 High School, Sector-XII – 58.8%.
- S.S.C Passed in 2000 – 58.0 %.
Experience
- Working as Project Engineer with Arabian Thermal Aire Ind. Co., Al Jubail, and Kingdom Of Saudi Arabia Since June 14th 2008 till date.
- Worked as QA/QC Engineer in Bhandari / Ring Forging Pvt. Ltd. (India). August 2007 to April 2008.
Technical Expertise
- Software package : AutoCAD 2004-2009, Expert to
use of Lotus Smart Suit-1-2-3, Lotus 3.Release 9,
Lotus Notes 8 (Basic), Microsoft Office 2003-2007
- Familiar with ASME Code B31.3 used for process
Piping, ASME boiler and pressure vessels code
section VIII,Div I, Familiar with Piping inspection
ASME section IX ( Welding & Brazing ), API1104
(Welding Of Pipelines). Preparing CSWIP exam in
2011.
Achievements

- Best Outgoing Student Award from New Era Mission High School.
- Participated in district level Badminton Tournament in 2006
- Won Regional level Cricket Tournament in 1999 & 2001
- Presented a Technical paper on Safety Switches.
- Best bowler award for three consecutive years by FCC.


Strengths
- Easy understanding and analyzing capability
- Ability to deal with people diplomatically.
- Good Organizing Capability.
- Good Communication skills.
- Quick learner and quick decision making ability.
Area of Interest
- Looking for an opportunity in a petrochemical /oil & Gas Company as a piping engineer (Piping & Plant designer or QA/QC Engineer). Willing to learn PDS, Caesar- II, Micro station, Auto plant etc. Familiar with pressure vessels, Heat Exchangers, Piping, Valves, Tank, gaskets, flanges, welding.
PROJECT PROFILE.
- SAUDI KAYAN PETROCHEMICAL PROJECT, KAMCO
- SAMSUNG, JUBAIL, KSA.
- Barwa Commercial Avenue-Mercury
My Responsibilities :
- Familiar with all HVAC equipments and Expert to prepare engineering issuances for all accessories, Fire Dampers, Volume Dampers, Louvers, Mesh Screen, Spin Collars,etc
- Responsible in reviewing all new contracts / Purchase Orders, to ensure full understanding of customer requirements
- Expert in Preparation of Tag drawings and takeoff. Knowledge of Vulcan II Software in this I can feed all ducting layout with all components like straight duct, elbows, tees, reducers
- Estimation and costing of silencers. Expert in design and selections of silencers, louvers for HVAC system using IAC-UK SNAP Program.
- Expert in estimating, costing and preparing B.O.Q’s for silencers. Expert in use of IAC UK program in calculations and selection for silencers.
- Expert to use Lotus Smart Suit-1-2-3, Lotus 1-2-3.Release 5 & 9, Lotus Notes 8 (Basic)
- Designing and Estimation/costing of silencers for HVAC systems.
- Designing and Estimation/costing of Louvers, Panels
- Adobe acrobat. 8 professional
Familiar with Piping Design Engineering : Still working hard to gain more in this area
- Familiar with piping materials selection, piping sizing calculation and Pipe thickness selection.
- Piping Codes ASME B31.3 and Standar.Manufacturing of Metallic pipes
- Fabrication and installation of piping systems
- Selection and application of valves &control valves
- Familiar with ITP for welding
- Preparation of Piping Layout drawing from P & ID documents
- Familiar with system description (SD), PFD, system flow diagram (SFD
- Familiar with different types of pipe fittings, coupling, swage, union, flanged fittings, plastic fittings, Joints etc.
- Familiar with Mechanical equipments such as Horizontal Pressure Vessels (Accumulators), Vertical Pressure Vessels ( Fractionation Column), Pump,Motors,Heat Exchangers, Cooling Towers
- Familiar with ASME Boiler and Pressure vessel codes.
- Familiar with Section VIII Div I
- Design and construction of pressure vessel
- Measurements and weight, Geometry and layout of pressure vessels Like Pipe thickness, Internal pressure, External pressure, calculations for dish heads mechanical equipments
- Flow diagram instrument symbols
- Material selections preparation of BOQ
Familiar with INSPECTION Procedure (Preparing for 2011 CSWIP Exam.)
- I know how to Co-ordinate with the Client and main sub contractor for day to day activities.
- In charge of Production and Quality Control, route card, control plan, time docket, inspection report
- Use of AutoCAD 2D-3D to resolve questions and create clear drawings for use by welders in the shop and the field.
- Ensure that approved WPS is followed.
- Welding consumables and non consumables procedures.
- Review of calibration certificates for temperature recorders and other testing equipments.
- Maintained certification logs for MPI and hydrotest equipment.
- Follow safety procedure.
- Coordinating technical queries with project management teams (PMT) on daily basis.
- Carrying out welder’s qualification test & WPS and PQR, as per standards.
- Verifying the hardness reports and approving it.
Project # 1 ( UG Level )
Title Mini Air Vehicle Part Fabrication Using Polymer Composites.
( National Aerospace Laboratories, NAL Bangalore)
Duration 4 Months
Team size 4
Role Drafting & Fabrication from initial stage.
Fabrication of all parts like Fuselage, Elevators, Rudder, wings and wheels of an Air Craft from polymer composite to reduce the weight of air craft for future purpose.
So that we can use these mini air vehicles in different areas.
Project #1(UG Level)
Declaration
I declare that the information above is true to the best of my knowledge. Being technically sound, young and enthusiastic I am confident that I can fulfill your esteemed organization’s requirements. I wish and hope that I’ll get the privilege of serving your organization.

Date : 11 October 2010

Place : Jubail, KSA. Mohammed Aftab Alam

[Guest]

Paul Mathew
paulkottat AT yahoo.com
OBJECTIVE
To work in the most challenging position with an organization that provides ample opportunities to learn and to contribute.
TECHNICAL SKILLS
QA/QC
Certified Quality Controller (CQC from Decibel NDE)
- A good grounding in welding codes and processes : ASME, BS EN, MIG, TIG, SMAW, SAW, MMA, heat treatment.
- Experience of range calibration of materials such as Stainless Steel, Alloy Steel, Carbon Steel.
- A good knowledge in isometric drawings and interpretation of the defects.
NDT METHODS
ASNT NDT Level II in
- Visual Testing [VT]
- Liquid Penetrant Testing [PT]
- Magnetic Particle Testing [MT]
- Radiographic Testing [RT]
- Radiographic Film Interpretation [RTFI]
- Ultrasonic Testing [UT]
- Experience of range calibration of materials such as Stainless Steel, Alloy Steel, Carbon Steel
- Thickness measurements using DE-METERS
- Have worked in digital machines such as KRATKRAMER – DM4,DM2
MODSONIC EINSTIEN-II
(According to CP - 189 2006 & SNT –TC - 1A 2006 edition Syllabus)
Application Software
Office applications, Auto Cad.
QUALIFICATION
Examination
Specialization
School/College
University/Board

Class
B.TECH
Mechanical
SCMS School Of Engineering&Technology,Karukutty

Mahatma Gandhi University,Kottayam

Second
+2
Computer science+ Math’s
Stanton’s H.S.S, Mala
State
First
S.S.L.C
S.S.L.C
St.Augusine’s H.S, Kaloor
State
First
ACADEMIC PROJECT
Main project : Maintenance of TRANE chiller unit
Project Done At : Appolo Tyres, Kalamassery.
Description
TRANE chiller unit was the most advanced chiller units in Appolo tyres.they were maintaining the unit just by note down the reading and compare it with the last day reading at the same time. We suggest that with NDT technique it is very easy to detect is any defect/discontinuity is present within the chiller unit. After doing this technique we found that efficiency of the chiller unit is increased by 0.5-0.9 %.
EXPERIENCE
- working as an QA/QC engineer cum NDT ispector in decibel NDE about 1 year

[Guest]

Santhapragash.S

E-Mail : santharayar AT gmail.com
Career objective : An Engineering student having strong motivation along with strong desire to work with organization that matches my profile by constant learning and implementing. Looking forward for challenging carrer in the mechanical industry to prove myself with continuous hard work in the provided area of development.
Qualification : BACHELOR OF ENGINEERING
Branch : Mechanical Percentage : 70% Year :2006 Class obtained : First Dr.Navalar Nedunchezian College College of Engineering (Affiliated to Anna University), Cuddalore, Tamilnadu. S.S.L.C - 79.90% H.S.C – 81.67 B.H.E.L Matriculation Higher Secondary School, Trichy -620014.
Skill Set : Packages : MS Office Platform : Windows
Professional Skills : 1. ASNT Level-II in NDT Examinations ( RT, UT, LP, MT)
2. Having knowledge in ASME codes regarding welding & fabrication.
3. Having basic knowledge in IBR standards
Certification : 1. Holding a certificate of Life Membership in Indian Welding Society
a. ( Membership No : L 00847)
2. Attended a week program on Welding Technology.
Previous Experience : Company : G.B. Engineering Enterprises Private Limited, Trichy-15. Designation : Sr. Engineer Department : Welding Duration : Feb 2007 to Feb 2011
Current Employment : Company : RIBO INDUSTRIES PVT LTD, MATHUR, PUDUKKOTTAI Dt Designation : Sr. Engineer Department : Welding Duration : Feb 2011 to Till date
Job Handled & Code knowledge : 1. Economiser coils, Super heater coils, Evaporator coils, Reheater coils & modules for Enmas, NTPC, etc.
2. Spiral coils, Helical coils for Fertilizer companies like NFL
3. Waterwall panels & headers for Enmas, BHEL, Ansaldo etc.
4. Steam drums for Enmas, BHEL, ALSTOM etc.
5. Sand filters, Deareator tanks for SWS etc
ASME Codes (Sec I, Sec II A,C, Sec IX), IBR 1950.
Responsibilities : 1. Study & Review of drawings & prepare work content pertains to the work order.
2. Identifying critical parameters, dimensions, points that will be taken care during fabrication.
3. Establishing a system (Welding Procedures) that welding activities in shop are executed as per design code and meeting time delivery in a cost effective manner while maintaining consistent standards of quality.
4. Control weld repair in the shop by analyzing the root cause of defect and implementing corrective action to prevent re- occurrence.
5. Impart training & qualification of Welder / Welding Operator & arranging training whenever required. Plan & control the welding consumables in shop & store.
6. Assist in developing & locating new welding consumable manufacturer to get consumable with reduced cost.
7. Maintain the safety aspects during welding